-\input texinfo @c -*-texinfo-*-
+@c \input texinfo @c -*-texinfo-*-
@setfilename gnus
-@settitle Gnus 5.6.33 Manual
+@settitle Pterodactyl Gnus 0.96 Manual
@synindex fn cp
@synindex vr cp
@synindex pg cp
@c @direntry
-@c * Gnus: (gnus). The news reader Gnus.
+@c * Gnus: (gnus). The newsreader Gnus.
@c @end direntry
@iftex
@finalout
\newcommand{\gnussc}[1]{\textsc{#1}}
\newcommand{\gnustitle}[1]{{\huge\textbf{#1}}}
\newcommand{\gnusauthor}[1]{{\large\textbf{#1}}}
+\newcommand{\gnusresult}[1]{\gnustt{=> #1}}
\newcommand{\gnusbullet}{{${\bullet}$}}
\newcommand{\gnusdollar}{\$}
\thispagestyle{empty}
-Copyright \copyright{} 1995,96,97 Free Software Foundation, Inc.
+Copyright \copyright{} 1995,96,97,98,99 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
This file documents Gnus, the GNU Emacs newsreader.
-Copyright (C) 1995,96 Free Software Foundation, Inc.
+Copyright (C) 1995,96,97,98,99 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
@tex
@titlepage
-@title Gnus 5.6.33 Manual
+@title Pterodactyl Gnus 0.96 Manual
@author by Lars Magne Ingebrigtsen
@page
@vskip 0pt plus 1filll
-Copyright @copyright{} 1995,96,97 Free Software Foundation, Inc.
+Copyright @copyright{} 1995,96,97,98,99 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
spool or your mbox file. All at the same time, if you want to push your
luck.
-This manual corresponds to Gnus 5.6.33.
+This manual corresponds to Pterodactyl Gnus 0.96.
@end ifinfo
@code{gnus-nntp-server} to @code{nil}, which is what it is by default.
@vindex gnus-secondary-servers
+@vindex gnus-nntp-server
You can also make Gnus prompt you interactively for the name of an
@sc{nntp} server. If you give a non-numerical prefix to @code{gnus}
(i.e., @kbd{C-u M-x gnus}), Gnus will let you choose between the servers
in the @code{gnus-secondary-servers} list (if any). You can also just
-type in the name of any server you feel like visiting.
+type in the name of any server you feel like visiting. (Note that this
+will set @code{gnus-nntp-server}, which means that if you then @kbd{M-x
+gnus} later in the same Emacs session, Gnus will contact the same
+server.)
@findex gnus-group-browse-foreign-server
@kindex B (Group)
Subscribe all new groups hierarchically. The difference between this
function and @code{gnus-subscribe-alphabetically} is slight.
@code{gnus-subscribe-alphabetically} will subscribe new groups in a strictly
-alphabetical fashion, while this function will enter groups into it's
+alphabetical fashion, while this function will enter groups into its
hierarchy. So if you want to have the @samp{rec} hierarchy before the
@samp{comp} hierarchy, this function will not mess that configuration
up. Or something like that.
gnus-group-clear-data-on-native-groups} command to clear out all data
that you have on your native groups. Use with caution.
+After changing servers, you @strong{must} move the cache hierarchy away,
+since the cached articles will have wrong article numbers, which will
+affect which articles Gnus thinks are read.
+
@node Startup Files
@section Startup Files
not stored in the @file{.newsrc} file.
@vindex gnus-save-newsrc-file
+@vindex gnus-read-newsrc-file
You can turn off writing the @file{.newsrc} file by setting
@code{gnus-save-newsrc-file} to @code{nil}, which means you can delete
the file and save some space, as well as exiting from Gnus faster.
However, this will make it impossible to use other newsreaders than
-Gnus. But hey, who would want to, right?
+Gnus. But hey, who would want to, right? Similarly, setting
+@code{gnus-read-newsrc-file} to @code{nil} makes Gnus ignore the
+@file{.newsrc} file and any @file{.newsrc-SERVER} files, which is
+convenient if you have a tendency to use Netscape once in a while.
@vindex gnus-save-killed-list
If @code{gnus-save-killed-list} (default @code{t}) is @code{nil}, Gnus
at all. In any case, @code{some} should be faster than @code{nil}, and
is certainly faster than @code{t} over slow lines.
+Some news servers (Leafnode and old versions of INN, for instance) do
+not support the @code{LIST ACTIVE group}. For these servers, @code{nil}
+is probably the most efficient value for this variable.
+
If this variable is @code{nil}, Gnus will ask for group info in total
lock-step, which isn't very fast. If it is @code{some} and you use an
@sc{nntp} server, Gnus will pump out commands as fast as it can, and
performance, but if the server does not support the aforementioned
@code{LIST ACTIVE group} command, this isn't very nice to the server.
+If you think that starting up Gnus takes too long, try all the three
+different values for this variable and see what works best for you.
+
In any case, if you use @code{some} or @code{nil}, you should definitely
kill all groups that you aren't interested in to speed things up.
A hook that is run as the very last thing after starting up Gnus
successfully.
-@item gnus-started-hook
-@vindex gnus-started-hook
+@item gnus-setup-news-hook
+@vindex gnus-setup-news-hook
A hook that is run after reading the @file{.newsrc} file(s), but before
generating the group buffer.
@item best
Select the highest scored article in the group when entering the
group.
+
+@end table
+
+This variable can also be a function. In that case, that function will
+be called to place point on a subject line, and/or select some article.
+Useful functions include:
+
+@table @code
+@item gnus-summary-first-unread-subject
+Place point on the subject line of the first unread article, but
+don't select the article.
+
+@item gnus-summary-first-unread-article
+Select the first unread article.
+
+@item gnus-summary-best-unread-article
+Select the highest-scored unread article.
@end table
+
If you want to prevent automatic selection in some group (say, in a
binary group with Huge articles) you can set this variable to @code{nil}
in @code{gnus-select-group-hook}, which is called when a group is
group buffer according to how often you read groups, perhaps? Within
reason?
-This is what @dfn{group score} is for. You can assign a score to each
-group. You can then sort the group buffer based on this score.
-Alternatively, you can sort on score and then level. (Taken together,
-the level and the score is called the @dfn{rank} of the group. A group
-that is on level 4 and has a score of 1 has a higher rank than a group
-on level 5 that has a score of 300. (The level is the most significant
-part and the score is the least significant part.))
+This is what @dfn{group score} is for. You can have Gnus assign a score
+to each group through the mechanism described below. You can then sort
+the group buffer based on this score. Alternatively, you can sort on
+score and then level. (Taken together, the level and the score is
+called the @dfn{rank} of the group. A group that is on level 4 and has
+a score of 1 has a higher rank than a group on level 5 that has a score
+of 300. (The level is the most significant part and the score is the
+least significant part.))
@findex gnus-summary-bubble-group
If you want groups you read often to get higher scores than groups you
command, you will be prompted for a file name and a file type.
Currently supported types are @code{babyl}, @code{mbox}, @code{digest},
@code{mmdf}, @code{news}, @code{rnews}, @code{clari-briefs},
-@code{rfc934}, @code{rfc822-forward}, and @code{forward}. If you run
-this command without a prefix, Gnus will guess at the file type.
-@xref{Document Groups}.
+@code{rfc934}, @code{rfc822-forward}, @code{nsmail} and @code{forward}.
+If you run this command without a prefix, Gnus will guess at the file
+type. @xref{Document Groups}.
+
+@item G u
+@kindex G u (Group)
+@vindex gnus-useful-groups
+@findex gnus-group-make-useful-group
+Create one of the groups mentioned in @code{gnus-useful-groups}
+(@code{gnus-group-make-useful-group}).
@item G w
@kindex G w (Group)
(@code{gnus-group-add-to-virtual}). Uses the process/prefix convention.
@end table
-@xref{Select Methods} for more information on the various select
+@xref{Select Methods}, for more information on the various select
methods.
@vindex gnus-activate-foreign-newsgroups
This might take quite a while, especially if you subscribe to lots of
groups from different @sc{nntp} servers. Also @pxref{Group Levels};
@code{gnus-activate-level} also affects activation of foreign
-newsgroups.
+newsgroups.
@node Group Parameters
Gnus, but provide a place for you to store information on particular
groups.
+@item charset
+Elements that look like @code{(charset . iso-8859-1)} will make
+@code{iso-8859-1} the default charset; that is, the charset that will be
+used for all articles that do not specify a charset.
+
@item @var{(variable form)}
You can use the group parameters to set variables local to the group you
are entering. If you want to turn threading off in @samp{news.answers},
group. @code{dummy-variable} will be set to the result of the
@code{(ding)} form, but who cares?
+@item posting-style
+You can store additional posting style information for this group only
+here (@pxref{Posting Styles}). The format is that of an entry in the
+@code{gnus-posting-styles} alist, except that there's no regexp matching
+the group name (of course). Style elements in this group parameter will
+take precedence over the ones found in @code{gnus-posting-styles}.
+
+For instance, if you want a funky name and signature in this group only,
+instead of hacking @code{gnus-posting-styles}, you could put something
+like this in the group parameters:
+
+@example
+(posting-style
+ (name "Funky Name")
+ (signature "Funky Signature"))
+@end example
+
@end table
Use the @kbd{G p} command to edit group parameters of a group. You
@end table
-When given a prefix, all these commands will sort in reverse order.
+All the commands below obey the process/prefix convention
+(@pxref{Process/Prefix}).
+
+When given a symbolic prefix (@pxref{Symbolic Prefixes}), all these
+commands will sort in reverse order.
You can also sort a subset of the groups:
@item G P a
@kindex G P a (Group)
@findex gnus-group-sort-selected-groups-by-alphabet
-Sort the process/prefixed groups in the group buffer alphabetically by
-group name (@code{gnus-group-sort-selected-groups-by-alphabet}).
+Sort the groups alphabetically by group name
+(@code{gnus-group-sort-selected-groups-by-alphabet}).
@item G P u
@kindex G P u (Group)
@findex gnus-group-sort-selected-groups-by-unread
-Sort the process/prefixed groups in the group buffer by the number of
-unread articles (@code{gnus-group-sort-selected-groups-by-unread}).
+Sort the groups by the number of unread articles
+(@code{gnus-group-sort-selected-groups-by-unread}).
@item G P l
@kindex G P l (Group)
@findex gnus-group-sort-selected-groups-by-level
-Sort the process/prefixed groups in the group buffer by group level
+Sort the groups by group level
(@code{gnus-group-sort-selected-groups-by-level}).
@item G P v
@kindex G P v (Group)
@findex gnus-group-sort-selected-groups-by-score
-Sort the process/prefixed groups in the group buffer by group score
+Sort the groups by group score
(@code{gnus-group-sort-selected-groups-by-score}). @xref{Group Score}.
@item G P r
@kindex G P r (Group)
@findex gnus-group-sort-selected-groups-by-rank
-Sort the process/prefixed groups in the group buffer by group rank
+Sort the groups by group rank
(@code{gnus-group-sort-selected-groups-by-rank}). @xref{Group Score}.
@item G P m
@kindex G P m (Group)
@findex gnus-group-sort-selected-groups-by-method
-Sort the process/prefixed groups in the group buffer alphabetically by
-backend name (@code{gnus-group-sort-selected-groups-by-method}).
+Sort the groups alphabetically by backend name
+(@code{gnus-group-sort-selected-groups-by-method}).
@end table
(@code{gnus-topic-move-group}). This command uses the process/prefix
convention (@pxref{Process/Prefix}).
+@item T j
+@kindex T j (Topic)
+@findex gnus-topic-jump-to-topic
+Go to a topic (@code{gnus-topic-jump-to-topic}).
+
@item T c
@kindex T c (Topic)
@findex gnus-topic-copy-group
remove a group from all topics, but in that case, Gnus will add it to
the root topic the next time you start Gnus. In fact, all new groups
(which, naturally, don't belong to any topic) will show up in the root
-topic.
+topic.
This command uses the process/prefix convention
(@pxref{Process/Prefix}).
Remove the process mark from all groups in the current topic
(@code{gnus-topic-unmark-topic}).
-@item RET
-@kindex RET (Topic)
-@findex gnus-topic-select-group
-@itemx SPACE
-Either select a group or fold a topic (@code{gnus-topic-select-group}).
-When you perform this command on a group, you'll enter the group, as
-usual. When done on a topic line, the topic will be folded (if it was
-visible) or unfolded (if it was folded already). So it's basically a
-toggling command on topics. In addition, if you give a numerical
-prefix, group on that level (and lower) will be displayed.
-
@item T TAB
@itemx TAB
@kindex T TAB (Topic)
@kindex M-TAB (Topic)
@findex gnus-topic-unindent
``Un-indent'' the current topic so that it becomes a sub-topic of the
-parent of its current parent (@code{gnus-topic-unindent}).
+parent of its current parent (@code{gnus-topic-unindent}).
+
+@item RET
+@kindex RET (Topic)
+@findex gnus-topic-select-group
+@itemx SPACE
+Either select a group or fold a topic (@code{gnus-topic-select-group}).
+When you perform this command on a group, you'll enter the group, as
+usual. When done on a topic line, the topic will be folded (if it was
+visible) or unfolded (if it was folded already). So it's basically a
+toggling command on topics. In addition, if you give a numerical
+prefix, group on that level (and lower) will be displayed.
+
+@item C-c C-x
+@kindex C-c C-x (Topic)
+@findex gnus-topic-expire-articles
+Run all expirable articles in the current group or topic through the expiry
+process (if any) (@code{gnus-topic-expire-articles}).
@item C-k
@kindex C-k (Topic)
@end table
-@xref{Sorting Groups} for more information about group sorting.
+@xref{Sorting Groups}, for more information about group sorting.
@node Topic Topology
* Saving Articles:: Ways of customizing article saving.
* Decoding Articles:: Gnus can treat series of (uu)encoded articles.
* Article Treatment:: The article buffer can be mangled at will.
+* MIME Commands:: Doing MIMEy things with the articles.
+* Charsets:: Character set issues.
* Article Commands:: Doing various things with the article buffer.
* Summary Sorting:: Sorting the summary buffer in various ways.
* Finding the Parent:: No child support? Get the parent.
@menu
* Summary Buffer Lines:: You can specify how summary lines should look.
+* To From Newsgroups:: How to not display your own name.
* Summary Buffer Mode Line:: You can say how the mode line should look.
* Summary Highlighting:: Making the summary buffer all pretty and nice.
@end menu
fast, and too simplistic solution; and
@code{mail-extract-address-components}, which works very nicely, but is
slower. The default function will return the wrong answer in 5% of the
-cases. If this is unacceptable to you, use the other function instead.
+cases. If this is unacceptable to you, use the other function instead:
+
+@lisp
+(setq gnus-extract-address-components
+ 'mail-extract-address-components)
+@end lisp
@vindex gnus-summary-same-subject
@code{gnus-summary-same-subject} is a string indicating that the current
@item N
Article number.
@item S
-Subject string.
+Subject string. List identifiers stripped, @code{gnus-list-identifies}. @xref{Article Hiding}.
@item s
Subject if the article is the root of the thread or the previous article
had a different subject, @code{gnus-summary-same-subject} otherwise.
Full @code{From} header.
@item n
The name (from the @code{From} header).
+@item f
+The name, code @code{To} header or the @code{Newsgroups} header
+(@pxref{To From Newsgroups}).
@item a
The name (from the @code{From} header). This differs from the @code{n}
spec in that it uses the function designated by the
@item R
This misleadingly named specifier is the @dfn{secondary mark}. This
mark will say whether the article has been replied to, has been cached,
-or has been saved.
+or has been saved.
@item i
Score as a number (@pxref{Scoring}).
This restriction may disappear in later versions of Gnus.
+@node To From Newsgroups
+@subsection To From Newsgroups
+@cindex To
+@cindex Newsgroups
+
+In some groups (particularly in archive groups), the @code{From} header
+isn't very interesting, since all the articles there are written by
+you. To display the information in the @code{To} or @code{Newsgroups}
+headers instead, you need to decide three things: What information to
+gather; where to display it; and when to display it.
+
+@enumerate
+@item
+@vindex gnus-extra-headers
+The reading of extra header information is controlled by the
+@code{gnus-extra-headers}. This is a list of header symbols. For
+instance:
+
+@lisp
+(setq gnus-extra-headers
+ '(To Newsgroups X-Newsreader))
+@end lisp
+
+This will result in Gnus trying to obtain these three headers, and
+storing it in header structures for later easy retrieval.
+
+@item
+@findex gnus-extra-header
+The value of these extra headers can be accessed via the
+@code{gnus-extra-header} function. Here's a format line spec that will
+access the @code{X-Newsreader} header:
+
+@example
+"%~(form (gnus-extra-header 'X-Newsreader))@@"
+@end example
+
+@item
+@vindex gnus-ignored-from-addresses
+The @code{gnus-ignored-from-addresses} variable says when the @samp{%f}
+summary line spec returns the @code{To}, @code{Newsreader} or
+@code{From} header. If this regexp matches the contents of the
+@code{From} header, the value of the @code{To} or @code{Newsreader}
+headers are used instead.
+
+@end enumerate
+
+@vindex nnmail-extra-headers
+A related variable is @code{nnmail-extra-headers}, which controls when
+to include extra headers when generating overview (@sc{nov}) files. If
+you have old overview files, you should regenerate them after changing
+this variable.
+
+@vindex gnus-summary-line-format
+You also have to instruct Gnus to display the data by changing the
+@code{%n} spec to the @code{%f} spec in the
+@code{gnus-summary-line-format} variable.
+
+In summary, you'd typically do something like the following:
+
+@lisp
+(setq gnus-extra-headers
+ '(To Newsgroups))
+(setq nnmail-extra-headers gnus-extra-headers)
+(setq gnus-summary-line-format
+ "%U%R%z%I%(%[%4L: %-20,20f%]%) %s\n")
+(setq gnus-ignored-from-addresses
+ "Your Name Here")
+@end lisp
+
+Now, this is mostly useful for mail groups, where you have control over
+the @sc{nov} files that are created. However, if you can persuade your
+nntp admin to add:
+
+@example
+Newsgroups:full
+@end example
+
+to the end of her @file{overview.fmt} file, then you can use that just
+as you would the extra headers from the mail groups.
+
+
@node Summary Buffer Mode Line
@subsection Summary Buffer Mode Line
buffer, which might make it more inconvenient to read extremely long
threads.
+This variable can also be a number. In that case, center the window at
+the given number of lines from the top.
+
@end table
Scroll the current article one line forward
(@code{gnus-summary-scroll-up}).
+@item M-RET
+@kindex M-RET (Summary)
+@findex gnus-summary-scroll-down
+Scroll the current article one line backward
+(@code{gnus-summary-scroll-down}).
+
@item A g
@itemx g
@kindex A g (Summary)
@kindex S W (Summary)
@findex gnus-summary-wide-reply-with-original
Mail a wide reply to the current article and include the original
-message (@code{gnus-summary-reply-with-original}). This command uses
+message (@code{gnus-summary-wide-reply-with-original}). This command uses
the process/prefix convention.
@item S o m
@end ifinfo
@menu
-* Setting Marks:: How to set and remove marks.
-* Setting Process Marks:: How to mark articles for later processing.
+* Setting Marks:: How to set and remove marks.
+* Generic Marking Commands:: How to customize the marking.
+* Setting Process Marks:: How to mark articles for later processing.
@end menu
long thesis on cats' urinary tracts, and have to go home for dinner
before you've finished reading the thesis. You can then set a bookmark
in the article, and Gnus will jump to this bookmark the next time it
-encounters the article. @xref{Setting Marks}
+encounters the article. @xref{Setting Marks}.
@item
@vindex gnus-replied-mark
@item
@vindex gnus-cached-mark
Articles stored in the article cache will be marked with an @samp{*} in
-the second column (@code{gnus-cached-mark}). @xref{Article Caching}
+the second column (@code{gnus-cached-mark}). @xref{Article Caching}.
@item
@vindex gnus-saved-mark
@kindex M t (Summary)
@findex gnus-summary-tick-article-forward
Tick the current article (@code{gnus-summary-tick-article-forward}).
-@xref{Article Caching}
+@xref{Article Caching}.
@item M ?
@itemx ?
@kindex M ? (Summary)
@findex gnus-summary-mark-as-dormant
Mark the current article as dormant
-(@code{gnus-summary-mark-as-dormant}). @xref{Article Caching}
+(@code{gnus-summary-mark-as-dormant}). @xref{Article Caching}.
@item M d
@itemx d
The default is @code{t}.
+@node Generic Marking Commands
+@subsection Generic Marking Commands
+
+Some people would like the command that ticks an article (@kbd{!}) go to
+the next article. Others would like it to go to the next unread
+article. Yet others would like it to stay on the current article. And
+even though I haven't heard of anybody wanting it to go to the
+previous (unread) article, I'm sure there are people that want that as
+well.
+
+Multiply these five behaviours with five different marking commands, and
+you get a potentially complex set of variable to control what each
+command should do.
+
+To sidestep that mess, Gnus provides commands that do all these
+different things. They can be found on the @kbd{M M} map in the summary
+buffer. Type @kbd{M M C-h} to see them all---there are too many of them
+to list in this manual.
+
+While you can use these commands directly, most users would prefer
+altering the summary mode keymap. For instance, if you would like the
+@kbd{!} command to go to the next article instead of the next unread
+article, you could say something like:
+
+@lisp
+(add-hook 'gnus-summary-mode-hook 'my-alter-summary-map)
+(defun my-alter-summary-map ()
+ (local-set-key "!" 'gnus-summary-put-mark-as-ticked-next))
+@end lisp
+
+or
+
+@lisp
+(defun my-alter-summary-map ()
+ (local-set-key "!" "MM!n"))
+@end lisp
+
+
@node Setting Process Marks
@subsection Setting Process Marks
@cindex setting process marks
Limit the summary buffer to articles that match some author
(@code{gnus-summary-limit-to-author}).
+@item / x
+@kindex / x (Summary)
+@findex gnus-summary-limit-to-extra
+Limit the summary buffer to articles that match one of the ``extra''
+headers (@pxref{To From Newsgroups})
+(@code{gnus-summary-limit-to-author}).
+
@item / u
@itemx x
@kindex / u (Summary)
Exclude all dormant articles from the limit
(@code{gnus-summary-limit-exclude-dormant}).
+@item / M
+@kindex / M (Summary)
+@findex gnus-summary-limit-exclude-marks
+Exclude all marked articles (@code{gnus-summary-limit-exclude-marks}).
+
@item / T
@kindex / T (Summary)
@findex gnus-summary-limit-include-thread
This is a number that says how much each sub-thread should be indented.
The default is 4.
+@item gnus-sort-gathered-threads-function
+@vindex gnus-sort-gathered-threads-function
+Sometimes, particularly with mailing lists, the order in which mails
+arrive locally is not necessarily the same as the order in which they
+arrived on the mailing list. Consequently, when sorting sub-threads
+using the default @code{gnus-thread-sort-by-number}, responses can end
+up appearing before the article to which they are responding to. Setting
+this variable to an alternate value
+(e.g. @code{gnus-thread-sort-by-date}), in a group's parameters or in an
+appropriate hook (e.g. @code{gnus-summary-generate-hook}) can produce a
+more logical sub-thread ordering in such instances.
+
@end table
@item gnus-parse-headers-hook
@vindex gnus-parse-headers-hook
-Hook run before parsing any headers. The default value is
-@code{(gnus-decode-rfc1522)}, which means that QPized headers will be
-slightly decoded in a hackish way. This is likely to change in the
-future when Gnus becomes @sc{MIME}ified.
+Hook run before parsing any headers.
@item gnus-alter-header-function
@vindex gnus-alter-header-function
@findex gnus-thread-sort-by-number
@vindex gnus-thread-sort-functions
If you are using a threaded summary display, you can sort the threads by
-setting @code{gnus-thread-sort-functions}, which is a list of functions.
+setting @code{gnus-thread-sort-functions}, which can be either a single
+function, a list of functions, or a list containing functions and
+@code{(not some-function)} elements.
+
By default, sorting is done on article numbers. Ready-made sorting
predicate functions include @code{gnus-thread-sort-by-number},
@code{gnus-thread-sort-by-author}, @code{gnus-thread-sort-by-subject},
Each function takes two threads and returns non-@code{nil} if the first
thread should be sorted before the other. Note that sorting really is
-normally done by looking only at the roots of each thread. If you use
-more than one function, the primary sort key should be the last function
-in the list. You should probably always include
+normally done by looking only at the roots of each thread.
+
+If you use more than one function, the primary sort key should be the
+last function in the list. You should probably always include
@code{gnus-thread-sort-by-number} in the list of sorting
functions---preferably first. This will ensure that threads that are
equal with respect to the other sort criteria will be displayed in
ascending article order.
-If you would like to sort by score, then by subject, and finally by
-number, you could do something like:
+If you would like to sort by reverse score, then by subject, and finally
+by number, you could do something like:
@lisp
(setq gnus-thread-sort-functions
'(gnus-thread-sort-by-number
gnus-thread-sort-by-subject
- gnus-thread-sort-by-total-score))
+ (not gnus-thread-sort-by-total-score)))
@end lisp
The threads that have highest score will be displayed first in the
The default value is @code{(read exit)}.
-@vindex gnus-use-header-prefetch
-If @code{gnus-use-header-prefetch} is non-@code{nil}, prefetch articles
-from the next group.
+@c @vindex gnus-use-header-prefetch
+@c If @code{gnus-use-header-prefetch} is non-@code{nil}, prefetch articles
+@c from the next group.
@node Article Caching
not then be downloaded by this command.
@vindex gnus-uncacheable-groups
-It is likely that you do not want caching on some groups. For instance,
+@vindex gnus-cacheable-groups
+It is likely that you do not want caching on all groups. For instance,
if your @code{nnml} mail is located under your home directory, it makes no
sense to cache it somewhere else under your home directory. Unless you
-feel that it's neat to use twice as much space. To limit the caching,
-you could set the @code{gnus-uncacheable-groups} regexp to
-@samp{^nnml}, for instance. This variable is @code{nil} by
-default.
+feel that it's neat to use twice as much space.
+
+To limit the caching, you could set @code{gnus-cacheable-groups} to a
+regexp of groups to cache, @samp{^nntp} for instance, or set the
+@code{gnus-uncacheable-groups} regexp to @samp{^nnml}, for instance.
+Both variables are @code{nil} by default. If a group matches both
+variables, the group is not cached.
@findex gnus-cache-generate-nov-databases
@findex gnus-cache-generate-active
@vindex gnus-default-article-saver
You can customize the @code{gnus-default-article-saver} variable to make
-Gnus do what you want it to. You can use any of the four ready-made
+Gnus do what you want it to. You can use any of the six ready-made
functions below, or you can create your own.
@table @code
say something like:
@lisp
(setq gnus-uu-user-view-rules
- (list '(\"\\\\.au$\" \"sox %s -t .aiff > /dev/audio\")))
+ (list '("\\\\.au$" "sox %s -t .aiff > /dev/audio")))
@end lisp
@item gnus-uu-user-view-rules-end
* Article Buttons:: Click on URLs, Message-IDs, addresses and the like.
* Article Date:: Grumble, UT!
* Article Signature:: What is a signature?
+* Article Miscellania:: Various other stuff.
@end menu
@cindex highlighting
Not only do you want your article buffer to look like fruit salad, but
-you want it to look like technicolor fruit salad.
+you want it to look like technicolor fruit salad.
@table @kbd
(@code{gnus-article-highlight}). This function highlights header, cited
text, the signature, and adds buttons to the body and the head.
-Most users would prefer using @code{gnus-article-maybe-highlight} in
-@code{gnus-article-display-hook} (@pxref{Customizing Articles}) instead.
-This is a bit less agressive---it highlights only the headers, the
-signature and adds buttons.
-
@item W H h
@kindex W H h (Summary)
@findex gnus-article-highlight-headers
@end table
-@xref{Customizing Articles} for how to highlight articles automatically.
+@xref{Customizing Articles}, for how to highlight articles automatically.
@node Article Fontisizing
(copy-face 'red 'gnus-emphasis-italic)
@end lisp
-@xref{Customizing Articles} for how to fontize articles automatically.
+@vindex gnus-group-highlight-words-alist
+
+If you want to highlight arbitrary words, you can use the
+@code{gnus-group-highlight-words-alist} variable, which uses the same
+syntax as @code{gnus-emphasis-alist}. The @code{highlight-words} group
+parameter (@pxref{Group Parameters}) can also be used.
+
+@xref{Customizing Articles}, for how to fontize articles automatically.
@node Article Hiding
@findex gnus-article-hide
Do quite a lot of hiding on the article buffer
(@kbd{gnus-article-hide}). In particular, this function will hide
-headers, PGP, cited text and the signature.
+headers, PGP, cited text and the signature.
@item W W h
@kindex W W h (Summary)
Hide signature (@code{gnus-article-hide-signature}). @xref{Article
Signature}.
+@item W W l
+@kindex W W l (Summary)
+@findex gnus-article-hide-list-identifiers
+@vindex gnus-list-identifiers
+Hide list identifiers specified in @code{gnus-list-identifiers}. Theese
+are strings some list servers add to the beginning of all @code{Subject}
+headers---for example, @samp{[zebra 4711]}.
+
+@table @code
+
+@item gnus-list-identifiers
+@vindex gnus-list-identifiers
+A regular expression that matches list identifiers to be removed from
+subject. This can also be a list of regular expressions.
+
+@end table
+
@item W W p
@kindex W W p (Summary)
@findex gnus-article-hide-pgp
@vindex gnus-article-hide-pgp-hook
Hide @sc{pgp} signatures (@code{gnus-article-hide-pgp}). The
@code{gnus-article-hide-pgp-hook} hook will be run after a @sc{pgp}
-signature has been hidden.
+signature has been hidden. For example, to automatically verify
+articles that have signatures in them do:
+@lisp
+;;; Hide pgp cruft if any.
+
+(setq gnus-treat-strip-pgp t)
+
+;;; After hiding pgp, verify the message;
+;;; only happens if pgp signature is found.
+
+(add-hook 'gnus-article-hide-pgp-hook
+ (lambda ()
+ (save-excursion
+ (set-buffer gnus-original-article-buffer)
+ (mc-verify))))
+@end lisp
@item W W P
@kindex W W P (Summary)
Hide @sc{pem} (privacy enhanced messages) cruft
(@code{gnus-article-hide-pem}).
+@item W W B
+@kindex W W B (Summary)
+@findex gnus-article-strip-banner
+Strip the banner specified by the @code{banner} group parameter
+(@code{gnus-article-strip-banner}). This is mainly used to hide those
+annoying banners and/or signatures that some mailing lists and moderated
+groups adds to all the messages. The way to use this function is to add
+the @code{banner} group parameter (@pxref{Group Parameters}) to the
+group you want banners stripped from. The parameter either be a string,
+which will be interpreted as a regular expression matching text to be
+removed, or the symbol @code{signature}, meaning that the (last)
+signature should be removed.
+
@item W W c
@kindex W W c (Summary)
@findex gnus-article-hide-citation
@table @samp
@item b
-Start point of the hidden text.
+Starting point of the hidden text.
@item e
-End point of the hidden text.
+Ending point of the hidden text.
@item l
-Length of the hidden text.
+Number of characters in the hidden region.
+@item n
+Number of lines of hidden text.
@end table
@item gnus-cited-lines-visible
Hide cited text in articles that aren't roots
(@code{gnus-article-hide-citation-in-followups}). This isn't very
useful as an interactive command, but might be a handy function to stick
-in @code{gnus-article-display-hook} (@pxref{Customizing Articles}).
+have happen automatically (@pxref{Customizing Articles}).
@end table
Also @pxref{Article Highlighting} for further variables for
citation customization.
-@xref{Customizing Articles} for how to hide article elements
+@xref{Customizing Articles}, for how to hide article elements
automatically.
@kindex W l (Summary)
@findex gnus-summary-stop-page-breaking
Remove page breaks from the current article
-(@code{gnus-summary-stop-page-breaking}). @xref{Misc Article} for page
-delimiters.
+(@code{gnus-summary-stop-page-breaking}). @xref{Misc Article}, for page
+delimiters.
@item W r
@kindex W r (Summary)
Toggle whether to display all headers in the article buffer permanently
(@code{gnus-summary-verbose-header}).
-@item W m
-@kindex W m (Summary)
-@findex gnus-summary-toggle-mime
-Toggle whether to run the article through @sc{mime} before displaying
-(@code{gnus-summary-toggle-mime}).
-
@item W o
@kindex W o (Summary)
@findex gnus-article-treat-overstrike
@item W d
@kindex W d (Summary)
@findex gnus-article-treat-dumbquotes
-Treat M******** sm*rtq**t*s (@code{gnus-article-treat-dumbquotes}).
+@vindex gnus-article-dumbquotes-map
+@cindex Smartquotes
+@cindex M******** sm*rtq**t*s
+@cindex Latin 1
+Treat M******** sm*rtq**t*s according to
+@code{gnus-article-dumbquotes-map}
+(@code{gnus-article-treat-dumbquotes}). Note that this function guesses
+whether a character is a sm*rtq**t* or not, so it should only be used
+interactively.
@item W w
@kindex W w (Summary)
@findex gnus-article-fill-cited-article
-Do word wrap (@code{gnus-article-fill-cited-article}). If you use this
-function in @code{gnus-article-display-hook}, it should be run fairly
-late and certainly after any highlighting.
+Do word wrap (@code{gnus-article-fill-cited-article}).
You can give the command a numerical prefix to specify the width to use
when filling.
+@item W q
+@kindex W q (Summary)
+@findex gnus-article-fill-long-lines
+Fill long lines (@code{gnus-article-fill-long-lines}).
+
+@item W C
+@kindex W C (Summary)
+@findex gnus-article-capitalize-sentences
+Capitalize the first word in each sentence
+(@code{gnus-article-capitalize-sentences}).
+
@item W c
@kindex W c (Summary)
@findex gnus-article-remove-cr
-Remove CR (i. e., @samp{^M}s on the end of the lines)
+Translate CRLF pairs (i. e., @samp{^M}s on the end of the lines) into LF
+(this takes care of DOS line endings), and then translate any remaining
+CRs into LF (this takes care of Mac line endings)
(@code{gnus-article-remove-cr}).
@item W q
Quoted-Printable is one common @sc{mime} encoding employed when sending
non-ASCII (i. e., 8-bit) articles. It typically makes strings like
@samp{déjà vu} look like @samp{d=E9j=E0 vu}, which doesn't look very
-readable to me.
+readable to me. Note that the this is usually done automatically by
+Gnus if the message in question has a @code{Content-Transfer-Encoding}
+header that says that this encoding has been done.
@item W f
@kindex W f (Summary)
@kindex W b (Summary)
@findex gnus-article-add-buttons
Add clickable buttons to the article (@code{gnus-article-add-buttons}).
-@xref{Article Buttons}
+@xref{Article Buttons}.
@item W B
@kindex W B (Summary)
Add clickable buttons to the article headers
(@code{gnus-article-add-buttons-to-head}).
+@item W W H
+@kindex W W H (Summary)
+@findex gnus-article-strip-headers-from-body
+Strip headers like the @code{X-No-Archive} header from the beginning of
+article bodies (@code{gnus-article-strip-headers-from-body}).
+
@item W E l
@kindex W E l (Summary)
@findex gnus-article-strip-leading-blank-lines
Remove all white space from the beginning of all lines of the article
body (@code{gnus-article-strip-leading-space}).
+@item W E e
+@kindex W E e (Summary)
+@findex gnus-article-strip-trailing-space
+Remove all white space from the end of all lines of the article
+body (@code{gnus-article-strip-trailing-space}).
+
@end table
-@xref{Customizing Articles} for how to wash articles automatically.
+@xref{Customizing Articles}, for how to wash articles automatically.
@node Article Buttons
@end table
-@xref{Customizing Articles} for how to buttonize articles automatically.
+@xref{Customizing Articles}, for how to buttonize articles automatically.
@node Article Date
@findex gnus-start-date-timer
@findex gnus-stop-date-timer
Say how much time has elapsed between the article was posted and now
-(@code{gnus-article-date-lapsed}). If you want to have this line
-updated continually, you can put
+(@code{gnus-article-date-lapsed}). It looks something like:
+
+@example
+X-Sent: 9 years, 6 weeks, 4 days, 9 hours, 3 minutes, 28 seconds ago
+@end example
+
+The value of @code{gnus-article-date-lapsed-new-header} determines
+whether this header will just be added below the old Date one, or will
+replace it.
+
+An advantage of using Gnus to read mail is that it converts simple bugs
+into wonderful absurdities.
+
+If you want to have this line updated continually, you can put
@lisp
(gnus-start-date-timer)
@end table
-@xref{Customizing Articles} for how to display the date in your
+@xref{Customizing Articles}, for how to display the date in your
preferred format automatically.
@vindex gnus-signature-limit
@code{gnus-signature-limit} provides a limit to what is considered a
-signature.
+signature when displaying articles.
@enumerate
@item
signature after all.
+@node Article Miscellania
+@subsection Article Miscellania
+
+@table @kbd
+@item A t
+@kindex A t (Summary)
+@findex gnus-article-babel
+Translate the article from one language to another
+(@code{gnus-article-babel}).
+
+@end table
+
+
+@node MIME Commands
+@section @sc{mime} Commands
+@cindex MIME decoding
+
+@table @kbd
+@item X m
+@kindex X m (Summary)
+@findex gnus-summary-save-parts
+Save all parts matching a @sc{mime} type to a directory
+(@code{gnus-summary-save-parts}). Understands the process/prefix
+convention (@pxref{Process/Prefix}).
+
+@item M-t
+@kindex M-t (Summary)
+@findex gnus-summary-display-buttonized
+Toggle the buttonized display of the article buffer
+(@code{gnus-summary-toggle-display-buttonized}).
+
+@item W M w
+@kindex W M w (Summary)
+Decode RFC2047-encoded words in the article headers
+(@code{gnus-article-decode-mime-words}).
+
+@item W M c
+@kindex W M c (Summary)
+Decode encoded article bodies as well as charsets
+(@code{gnus-article-decode-charset}).
+
+This command looks in the @code{Content-Type} header to determine the
+charset. If there is no such header in the article, you can give it a
+prefix, which will prompt for the charset to decode as. In regional
+groups where people post using some common encoding (but do not include
+MIME headers), you can set the @code{charset} group/topic parameter to
+the required charset (@pxref{Group Parameters}).
+
+@item W M v
+@kindex W M v (Summary)
+View all the @sc{mime} parts in the current article
+(@code{gnus-mime-view-all-parts}).
+
+@end table
+
+Relevant variables:
+
+@table @code
+@item gnus-ignored-mime-types
+@vindex gnus-ignored-mime-types
+This is a list of regexps. @sc{mime} types that match a regexp from
+this list will be completely ignored by Gnus. The default value is
+@code{nil}.
+
+To have all Vcards be ignored, you'd say something like this:
+
+@lisp
+(setq gnus-ignored-mime-types
+ '("text/x-vcard"))
+@end lisp
+
+@item gnus-unbuttonized-mime-types
+@vindex gnus-unbuttonized-mime-types
+This is a list of regexps. @sc{mime} types that match a regexp from
+this list won't have @sc{mime} buttons inserted unless they aren't
+displayed. The default value is @code{(".*/.*")}.
+
+@item gnus-article-mime-part-function
+@vindex gnus-article-mime-part-function
+For each @sc{mime} part, this function will be called with the @sc{mime}
+handle as the parameter. The function is meant to be used to allow
+users to gather information from the article (e. g., add Vcard info to
+the bbdb database) or to do actions based on parts (e. g., automatically
+save all jpegs into some directory).
+
+Here's an example function the does the latter:
+
+@lisp
+(defun my-save-all-jpeg-parts (handle)
+ (when (equal (car (mm-handle-type handle)) "image/jpeg")
+ (with-temp-buffer
+ (insert (mm-get-part handle))
+ (write-region (point-min) (point-max)
+ (read-file-name "Save jpeg to: ")))))
+(setq gnus-article-mime-part-function
+ 'my-save-all-jpeg-parts)
+@end lisp
+
+@vindex gnus-mime-multipart-functions
+@item gnus-mime-multipart-functions
+Alist of @sc{mime} multipart types and functions to handle them.
+
+@end table
+
+
+@node Charsets
+@section Charsets
+@cindex charsets
+
+People use different charsets, and we have @sc{mime} to let us know what
+charsets they use. Or rather, we wish we had. Many people use
+newsreaders and mailers that do not understand or use @sc{mime}, and
+just send out messages without saying what character sets they use. To
+help a bit with this, some local news hierarchies have policies that say
+what character set is the default. For instance, the @samp{fj}
+hierarchy uses @code{iso-2022-jp-2}.
+
+@vindex gnus-group-charset-alist
+This knowledge is encoded in the @code{gnus-group-charset-alist}
+variable, which is an alist of regexps (to match group names) and
+default charsets to be used when reading these groups.
+
+In addition, some people do use soi-disant @sc{mime}-aware agents that
+aren't. These blitely mark messages as being in @code{iso-8859-1} even
+if they really are in @code{koi-8}. To help here, the
+@code{gnus-newsgroup-ignored-charsets} variable can be used. The
+charsets that are listed here will be ignored. The variable can be set
+on a group-by-group basis using the group parameters (@pxref{Group
+Parameters}). The default value is @code{(unknown-8bit)}, which is
+something some agents insist on having in there.
+
+
@node Article Commands
@section Article Commands
@findex gnus-summary-sort-by-lines
Sort by lines (@code{gnus-summary-sort-by-lines}).
+@item C-c C-s C-c
+@kindex C-c C-s C-c (Summary)
+@findex gnus-summary-sort-by-chars
+Sort by article length (@code{gnus-summary-sort-by-chars}).
+
@item C-c C-s C-i
@kindex C-c C-s C-i (Summary)
@findex gnus-summary-sort-by-score
Unpick the thread or article
(@code{gnus-pick-unmark-article-or-thread}). If the variable
@code{gnus-thread-hide-subtree} is true, then this key unpicks the
-thread if used at the first article of the thread. Otherwise it unpicks
+thread if used at the first article of the thread. Otherwise it unpicks
just the article. You can give this key a numerical prefix to unpick
the thread or article at that line.
@item B r
@kindex B r (Summary)
@findex gnus-summary-respool-article
-Respool the mail article (@code{gnus-summary-move-article}).
+Respool the mail article (@code{gnus-summary-respool-article}).
@code{gnus-summary-respool-default-method} will be used as the default
select method when respooling. This variable is @code{nil} by default,
which means that the current group select method will be used instead.
it to, for instance, highlight lines or modify the look of the buffer in
some other ungodly manner. I don't care.
+@vindex gnus-summary-prepared-hook
+@item gnus-summary-prepared-hook
+A hook called as the very last thing after the summary buffer has been
+generated.
+
@vindex gnus-summary-ignore-duplicates
@item gnus-summary-ignore-duplicates
When Gnus discovers two articles that have the same @code{Message-ID},
@table @kbd
-@item C-d
+@item A D
+@itemx C-d
@kindex C-d (Summary)
+@kindex A D (Summary)
@findex gnus-summary-enter-digest-group
If the current article is a collection of other articles (for instance,
a digest), you might use this command to enter a group based on the that
Edit the group parameters (@pxref{Group Parameters}) of the current
group (@code{gnus-summary-edit-parameters}).
+@item M-C-g
+@kindex M-C-g (Summary)
+@findex gnus-summary-customize-parameters
+Customize the group parameters (@pxref{Group Parameters}) of the current
+group (@code{gnus-summary-customize-parameters}).
+
@end table
variable, will be displayed in random order after all the headers listed in this variable.
@findex gnus-article-hide-boring-headers
-@vindex gnus-article-display-hook
@vindex gnus-boring-article-headers
-You can hide further boring headers by entering
-@code{gnus-article-hide-boring-headers} into
-@code{gnus-article-display-hook}. What this function does depends on
-the @code{gnus-boring-article-headers} variable. It's a list, but this
-list doesn't actually contain header names. Instead is lists various
-@dfn{boring conditions} that Gnus can check and remove from sight.
+You can hide further boring headers by setting
+@code{gnus-treat-hide-boring-header} to @code{head}. What this function
+does depends on the @code{gnus-boring-article-headers} variable. It's a
+list, but this list doesn't actually contain header names. Instead is
+lists various @dfn{boring conditions} that Gnus can check and remove
+from sight.
These conditions are:
@table @code
of the characters, and it also makes it possible to embed pictures and
other naughty stuff in innocent-looking articles.
-@vindex gnus-show-mime
-@vindex gnus-show-mime-method
-@vindex gnus-strict-mime
-@findex metamail-buffer
-Gnus handles @sc{mime} by pushing the articles through
-@code{gnus-show-mime-method}, which is @code{metamail-buffer} by
-default. This function calls the external @code{metamail} program to
-actually do the work. One common problem with this program is that is
-thinks that it can't display 8-bit things in the Emacs buffer. To tell
-it the truth, put something like the following in your
-@file{.bash_profile} file. (You do use @code{bash}, don't you?)
+@vindex gnus-display-mime-function
+@findex gnus-display-mime
+Gnus pushes @sc{mime} articles through @code{gnus-display-mime-function}
+to display the @sc{mime} parts. This is @code{gnus-display-mime} by
+default, which creates a bundle of clickable buttons that can be used to
+display, save and manipulate the @sc{mime} objects.
-@example
-export MM_CHARSET="iso-8859-1"
-@end example
+The following commands are available when you have placed point over a
+@sc{mime} button:
-For more information on @code{metamail}, see its manual page.
+@table @kbd
+@findex gnus-article-press-button
+@item RET (Article)
+@itemx BUTTON-2 (Article)
+Toggle displaying of the @sc{mime} object
+(@code{gnus-article-press-button}).
+
+@findex gnus-mime-view-part
+@item M-RET (Article)
+@itemx v (Article)
+Prompt for a method, and then view the @sc{mime} object using this
+method (@code{gnus-mime-view-part}).
+
+@findex gnus-mime-save-part
+@item o (Article)
+Prompt for a file name, and then save the @sc{mime} object
+(@code{gnus-mime-save-part}).
+
+@findex gnus-mime-copy-part
+@item c (Article)
+Copy the @sc{mime} object to a fresh buffer and display this buffer
+(@code{gnus-mime-copy-part}).
+
+@findex gnus-mime-view-part-as-type
+@item t (Article)
+View the @sc{mime} object as if it were a different @sc{mime} media type
+(@code{gnus-mime-view-part-as-type}.
+
+@findex gnus-mime-pipe-part
+@item | (Article)
+Output the @sc{mime} object to a process (@code{gnus-mime-pipe-part}).
+@end table
-Set @code{gnus-show-mime} to @code{t} if you want to use
-@sc{mime} all the time. However, if @code{gnus-strict-mime} is
-non-@code{nil}, the @sc{mime} method will only be used if there are
-@sc{mime} headers in the article. If you have @code{gnus-show-mime}
-set, then you'll see some unfortunate display glitches in the article
-buffer. These can't be avoided.
+Gnus will display some @sc{mime} objects automatically. The way Gnus
+determines which parts to do this with is described in the Emacs MIME
+manual.
-It might be best to just use the toggling functions from the summary
-buffer to avoid getting nasty surprises. (For instance, you enter the
+It might be best to just use the toggling functions from the article
+buffer to avoid getting nasty surprises. (For instance, you enter the
group @samp{alt.sing-a-long} and, before you know it, @sc{mime} has
decoded the sound file in the article and some horrible sing-a-long song
-comes screaming out your speakers, and you can't find the volume
-button, because there isn't one, and people are starting to look at you,
-and you try to stop the program, but you can't, and you can't find the
-program to control the volume, and everybody else in the room suddenly
-decides to look at you disdainfully, and you'll feel rather stupid.)
+comes screaming out your speakers, and you can't find the volume button,
+because there isn't one, and people are starting to look at you, and you
+try to stop the program, but you can't, and you can't find the program
+to control the volume, and everybody else in the room suddenly decides
+to look at you disdainfully, and you'll feel rather stupid.)
Any similarity to real events and people is purely coincidental. Ahem.
+Also see @pxref{MIME Commands}.
+
@node Customizing Articles
@section Customizing Articles
@cindex article customization
-@vindex gnus-article-display-hook
-The @code{gnus-article-display-hook} is called after the article has
-been inserted into the article buffer. It is meant to handle all
-treatment of the article before it is displayed.
+A slew of functions for customizing how the articles are to look like
+exist. You can call these functions interactively, or you can have them
+called automatically when you select the articles.
-@findex gnus-article-maybe-highlight
-@findex gnus-article-maybe-hide-headers
-By default this hook just contains
-@code{gnus-article-maybe-hide-headers},
-@code{gnus-hide-boring-headers}, @code{gnus-article-treat-overstrike},
-and @code{gnus-article-maybe-highlight} (and under XEmacs,
-@code{gnus-article-display-x-face}), but there are thousands, nay
-millions, of functions you can put in this hook. For an overview of
-functions @pxref{Article Highlighting}, @pxref{Article Hiding},
-@pxref{Article Washing}, @pxref{Article Buttons} and @pxref{Article
-Date}. Note that the order of functions in this hook might affect
-things, so you may have to fiddle a bit to get the desired results.
-
-You can, of course, write your own functions. The functions are called
-from the article buffer, and you can do anything you like, pretty much.
-There is no information that you have to keep in the buffer---you can
-change everything. However, you shouldn't delete any headers. Instead
-make them invisible if you want to make them go away.
+To have them called automatically, you should set the corresponding
+``treatment'' variable. For instance, to have headers hidden, you'd set
+@code{gnus-treat-hide-headers}. Below is a list of variables that can
+be set, but first we discuss the values these variables can have.
+
+Note: Some values, while valid, make little sense. Check the list below
+for sensible values.
+
+@enumerate
+@item
+@code{nil}: Don't do this treatment.
+
+@item
+@code{t}: Do this treatment on all body parts.
+
+@item
+@code{head}: Do the treatment on the headers.
+
+@item
+@code{last}: Do this treatment on the last part.
+
+@item
+An integer: Do this treatment on all body parts that have a length less
+than this number.
+
+@item
+A list of strings: Do this treatment on all body parts that are in
+articles that are read in groups that have names that match one of the
+regexps in the list.
+
+@item
+A list where the first element is not a string:
+
+The list is evaluated recursively. The first element of the list is a
+predicate. The following predicates are recognized: @code{or},
+@code{and}, @code{not} and @code{typep}. Here's an example:
+
+@lisp
+(or last
+ (typep "text/x-vcard"))
+@end lisp
+
+@end enumerate
+
+You may have noticed that the word @dfn{part} is used here. This refers
+to the fact that some messages are @sc{mime} multipart articles that may
+be divided into several parts. Articles that are not multiparts are
+considered to contain just a single part.
+
+@vindex gnus-article-treat-types
+Are the treatments applied to all sorts of multipart parts? Yes, if you
+want to, but by default, only @samp{text/plain} parts are given the
+treatment. This is controlled by the @code{gnus-article-treat-types}
+variable, which is a list of regular expressions that are matched to the
+type of the part. This variable is ignored if the value of the
+controlling variable is a predicate list, as described above.
+
+The following treatment options are available. The easiest way to
+customize this is to examine the @code{gnus-article-treat} customization
+group. Values in brackets are suggested sensible values. Others are possible
+but those listed are probably sufficient for most people.
+
+@table @code
+@item gnus-treat-highlight-signature (t, last)
+@item gnus-treat-buttonize (t, integer)
+@item gnus-treat-buttonize-head (head)
+@item gnus-treat-emphasize (t, head, integer)
+@item gnus-treat-fill-article (t, integer)
+@item gnus-treat-strip-cr (t, integer)
+@item gnus-treat-hide-headers (head)
+@item gnus-treat-hide-boring-headers (head)
+@item gnus-treat-hide-signature (t, last)
+@item gnus-treat-hide-citation (t, integer)
+@item gnus-treat-strip-pgp (t, last, integer)
+@item gnus-treat-strip-pem (t, last, integer)
+@item gnus-treat-highlight-headers (head)
+@item gnus-treat-highlight-citation (t, integer)
+@item gnus-treat-highlight-signature (t, last, integer)
+@item gnus-treat-date-ut (head)
+@item gnus-treat-date-local (head)
+@item gnus-treat-date-lapsed (head)
+@item gnus-treat-date-original (head)
+@item gnus-treat-strip-headers-in-body (t, integer)
+@item gnus-treat-strip-trailing-blank-lines (t, last, integer)
+@item gnus-treat-strip-leading-blank-lines (t, integer)
+@item gnus-treat-strip-multiple-blank-lines (t, integer)
+@item gnus-treat-overstrike (t, integer)
+@item gnus-treat-display-xface (head)
+@item gnus-treat-display-smileys (t, integer)
+@item gnus-treat-display-picons (head)
+@item gnus-treat-capitalize-sentences (t, integer)
+@item gnus-treat-fill-long-lines (t, integer)
+@item gnus-treat-play-sounds
+@item gnus-treat-translate
+@end table
+
+@vindex gnus-part-display-hook
+You can, of course, write your own functions to be called from
+@code{gnus-part-display-hook}. The functions are called narrowed to the
+part, and you can do anything you like, pretty much. There is no
+information that you have to keep in the buffer---you can change
+everything. However, you shouldn't delete any headers. Instead make
+them invisible if you want to make them go away.
@node Article Keymap
(This is the default.) If @code{nil}, each group will have its own
article buffer.
+@vindex gnus-article-decode-hook
+@item gnus-article-decode-hook
+@cindex MIME
+Hook used to decode @sc{mime} articles. The default value is
+@code{(article-decode-charset article-decode-encoded-words)}
+
@vindex gnus-article-prepare-hook
@item gnus-article-prepare-hook
This hook is called right after the article has been inserted into the
depending on the contents; it should probably not be used for changing
the contents of the article buffer.
-@vindex gnus-article-display-hook
-@item gnus-article-display-hook
-This hook is called as the last thing when displaying an article, and is
-intended for modifying the contents of the buffer, doing highlights,
-hiding headers, and the like.
-
@item gnus-article-mode-hook
@vindex gnus-article-mode-hook
Hook called in article mode buffers.
The @dfn{wash status} of the article. This is a short string with one
character for each possible article wash operation that may have been
performed.
+@item m
+The number of @sc{mime} parts in the article.
@end table
@vindex gnus-break-pages
Finally, if you want to always post using the same select method as
you're reading from (which might be convenient if you're reading lots of
groups from different private servers), you can set this variable to
-@code{current}.
+@code{current}.
@node Mail and Post
to @dfn{match}.
Each style may contain a arbitrary amount of @dfn{attributes}. Each
-attribute consists of a @var{(name . value)} pair. The attribute name
+attribute consists of a @var{(name value)} pair. The attribute name
can be one of @code{signature}, @code{signature-file},
-@code{organization}, @code{address} or @code{name}. The attribute name
-can also be a string. In that case, this will be used as a header name,
-and the value will be inserted in the headers of the article.
+@code{organization}, @code{address}, @code{name} or @code{body}. The
+attribute name can also be a string. In that case, this will be used as
+a header name, and the value will be inserted in the headers of the
+article.
-The attribute value can be a string (used verbatim), a function (the
-return value will be used), a variable (its value will be used) or a
-list (it will be @code{eval}ed and the return value will be used).
+The attribute value can be a string (used verbatim), a function with
+zero arguments (the return value will be used), a variable (its value
+will be used) or a list (it will be @code{eval}ed and the return value
+will be used). The functions and sexps are called/@code{eval}ed in the
+message buffer that is being set up. The headers of the current article
+are available through the @code{message-reply-headers} variable.
+
+If you wish to check whether the message you are about to compose is
+meant to be a news article or a mail message, you can check the values
+of the @code{message-news-p} and @code{message-mail-p} functions.
+
+@findex message-mail-p
+@findex message-news-p
So here's a new example:
(signature my-funny-signature-randomizer))
((equal (system-name) "gnarly")
(signature my-quote-randomizer))
- (posting-from-work-p
+ ((message-news-p)
+ (signature my-news-signature))
+ ((posting-from-work-p)
(signature-file "~/.work-signature")
(address "user@@bar.foo")
+ (body "You are fired.\n\nSincerely, your boss.")
(organization "Important Work, Inc"))
("^nn.+:"
(signature-file "~/.mail-signature"))))
by the @code{nntp-maximum-request} variable, and is 400 by default. If
your network is buggy, you should set this to 1.
-@c @item nntp-connection-timeout
-@c @vindex nntp-connection-timeout
-@c If you have lots of foreign @code{nntp} groups that you connect to
-@c regularly, you're sure to have problems with @sc{nntp} servers not
-@c responding properly, or being too loaded to reply within reasonable
-@c time. This is can lead to awkward problems, which can be helped
-@c somewhat by setting @code{nntp-connection-timeout}. This is an integer
-@c that says how many seconds the @code{nntp} backend should wait for a
-@c connection before giving up. If it is @code{nil}, which is the default,
-@c no timeouts are done.
-@c
+@item nntp-connection-timeout
+@vindex nntp-connection-timeout
+If you have lots of foreign @code{nntp} groups that you connect to
+regularly, you're sure to have problems with @sc{nntp} servers not
+responding properly, or being too loaded to reply within reasonable
+time. This is can lead to awkward problems, which can be helped
+somewhat by setting @code{nntp-connection-timeout}. This is an integer
+that says how many seconds the @code{nntp} backend should wait for a
+connection before giving up. If it is @code{nil}, which is the default,
+no timeouts are done.
+
@c @item nntp-command-timeout
@c @vindex nntp-command-timeout
@c @cindex PPP connections
course.
@menu
+* Mail in a Newsreader:: Important introductory notes.
* Getting Started Reading Mail:: A simple cookbook example.
* Splitting Mail:: How to create mail groups.
+* Mail Sources:: How to tell Gnus where to get mail from.
* Mail Backend Variables:: Variables for customizing mail handling.
* Fancy Mail Splitting:: Gnus can do hairy splitting of incoming mail.
-* Mail and Procmail:: Reading mail groups that procmail create.
+* Group Mail Splitting:: Use group customize to drive mail splitting.
* Incorporating Old Mail:: What about the old mail you have?
* Expiring Mail:: Getting rid of unwanted mail.
* Washing Mail:: Removing gruft from the mail you get.
@end menu
+@node Mail in a Newsreader
+@subsection Mail in a Newsreader
+
+If you are used to traditional mail readers, but have decided to switch
+to reading mail with Gnus, you may find yourself experiencing something
+of a culture shock.
+
+Gnus does not behave like traditional mail readers. If you want to make
+it behave that way, you can, but it's an uphill battle.
+
+Gnus, by default, handles all its groups using the same approach. This
+approach is very newsreaderly---you enter a group, see the new/unread
+messages, and when you read the messages, they get marked as read, and
+you don't see them any more. (Unless you explicitly ask for them.)
+
+In particular, you do not do anything explicitly to delete messages.
+
+Does this mean that all the messages that have been marked as read are
+deleted? How awful!
+
+But, no, it means that old messages are @dfn{expired} according to some
+scheme or other. For news messages, the expire process is controlled by
+the news administrator; for mail, the expire process is controlled by
+you. The expire process for mail is covered in depth in @pxref{Expiring
+Mail}.
+
+What many Gnus users find, after using it a while for both news and
+mail, is that the transport mechanism has very little to do with how
+they want to treat a message.
+
+Many people subscribe to several mailing lists. These are transported
+via SMTP, and are therefore mail. But we might go for weeks without
+answering, or even reading these messages very carefully. We may not
+need to save them because if we should need to read one again, they are
+archived somewhere else.
+
+Some people have local news groups which have only a handful of readers.
+These are transported via NNTP, and are therefore news. But we may need
+to read and answer a large fraction of the messages very carefully in
+order to do our work. And there may not be an archive, so we may need
+to save the interesting messages the same way we would personal mail.
+
+The important distinction turns out to be not the transport mechanism,
+but other factors such as how interested we are in the subject matter,
+or how easy it is to retrieve the message if we need to read it again.
+
+Gnus provides many options for sorting mail into ``groups'' which behave
+like newsgroups, and for treating each group (whether mail or news)
+differently.
+
+Some users never get comfortable using the Gnus (ahem) paradigm and wish
+that Gnus should grow up and be a male, er, mail reader. It is possible
+to whip Gnus into a more mailreaderly being, but, as said before, it's
+not easy. People who prefer proper mail readers should try @sc{vm}
+instead, which is an excellent, and proper, mail reader.
+
+I don't mean to scare anybody off, but I want to make it clear that you
+may be required to learn a new way of thinking about messages. After
+you've been subjected to The Gnus Way, you will come to love it. I can
+guarantee it. (At least the guy who sold me the Emacs Subliminal
+Brain-Washing Functions that I've put into Gnus did guarantee it. You
+Will Be Assimilated. You Love Gnus. You Love The Gnus Mail Way.
+You Do.)
+
+
@node Getting Started Reading Mail
@subsection Getting Started Reading Mail
insert sub-expressions from the matched text. For instance:
@lisp
-("list.\\1" "From:.*\\(.*\\)-list@@majordomo.com")
+("list.\\1" "From:.* \\(.*\\)-list@@majordomo.com")
@end lisp
The second element can also be a function. In that case, it will be
month's rent money.
-@node Mail Backend Variables
-@subsection Mail Backend Variables
+@node Mail Sources
+@subsection Mail Sources
-These variables are (for the most part) pertinent to all the various
-mail backends.
+Mail can be gotten from many different sources---the mail spool, from a
+POP mail server, or from a procmail directory, for instance.
+
+@menu
+* Mail Source Specifiers:: How to specify what a mail source is.
+* Mail Source Customization:: Some variables that influence things.
+* Fetching Mail:: Using the mail source specifiers.
+@end menu
+
+
+@node Mail Source Specifiers
+@subsubsection Mail Source Specifiers
+@cindex POP
+@cindex mail server
+@cindex procmail
+@cindex mail spool
+@cindex mail source
+
+You tell Gnus how to fetch mail by setting @code{mail-sources}
+(@pxref{Fetching Mail}) to a @dfn{mail source specifier}.
+
+Here's an example:
+
+@lisp
+(pop :server "pop3.mailserver.com" :user "myname")
+@end lisp
+
+As can be observed, a mail source specifier is a list where the first
+element is a @dfn{mail source type}, followed by an arbitrary number of
+@dfn{keywords}. Keywords that are not explicitly specified are given
+default values.
+
+The following mail source types are available:
@table @code
-@vindex nnmail-read-incoming-hook
-@item nnmail-read-incoming-hook
-The mail backends all call this hook after reading new mail. You can
-use this hook to notify any mail watch programs, if you want to.
+@item file
+Get mail from a single file; typically from the mail spool.
+
+Keywords:
+
+@table @code
+@item :path
+The path of the file. Defaults to the value of the @code{MAIL}
+environment variable or @file{/usr/mail/spool/user-name}.
+@end table
+
+An example file mail source:
+
+@lisp
+(file :path "/usr/spool/mail/user-name")
+@end lisp
+
+Or using the default path:
+
+@lisp
+(file)
+@end lisp
+
+@item directory
+Get mail from several files in a directory. This is typically used when
+you have procmail split the incoming mail into several files.
+
+Keywords:
+
+@table @code
+@item :path
+The path of the directory where the files are. There is no default
+value.
+
+@item :suffix
+Only files ending with this suffix are used. The default is
+@samp{.spool}.
+
+@item :predicate
+Only files that have this predicate return non-@code{nil} are returned.
+The default is @code{identity}. This is used as an additional
+filter---only files that have the right suffix @emph{and} satisfy this
+predicate are considered.
+
+@item :prescript
+@itemx :postscript
+Script run before/after fetching mail.
+
+@end table
+
+An example directory mail source:
+
+@lisp
+(directory :path "/home/user-name/procmail-dir/"
+ :suffix ".prcml")
+@end lisp
+
+@item pop
+Get mail from a POP server.
+
+Keywords:
+
+@table @code
+@item :server
+The name of the POP server. The default is taken from the
+@code{MAILHOST} environment variable.
+
+@item :port
+The port number of the POP server. The default is @samp{pop3}.
+
+@item :user
+The user name to give to the POP server. The default is the login
+name.
+
+@item :password
+The password to give to the POP server. If not specified, the user is
+prompted.
+
+@item :program
+The program to use to fetch mail from the POP server. This is should be
+a @code{format}-like string. Here's an example:
+
+@example
+fetchmail %u@@%s -P %p %t
+@end example
+
+The valid format specifier characters are:
+
+@table @samp
+@item t
+The name of the file the mail is to be moved to. This must always be
+included in this string.
+
+@item s
+The name of the server.
+@item P
+The port number of the server.
+
+@item u
+The user name to use.
+
+@item p
+The password to use.
+@end table
+
+The values used for these specs are taken from the values you give the
+corresponding keywords.
+
+@item :prescript
+A script to be run before fetching the mail. The syntax is the same as
+the @code{:program} keyword. This can also be a function to be run.
+
+@item :postscript
+A script to be run after fetching the mail. The syntax is the same as
+the @code{:program} keyword. This can also be a function to be run.
+
+@item :function
+The function to use to fetch mail from the POP server. The function is
+called with one parameter---the name of the file where the mail should
+be moved to.
+
+@item :authentication
+This can be either the symbol @code{password} or the symbol @code{apop}
+and says what authentication scheme to use. The default is
+@code{password}.
+
+@end table
+
+If the @code{:program} and @code{:function} keywords aren't specified,
+@code{pop3-movemail} will be used.
+
+Here are some examples. Fetch from the default POP server, using the
+default user name, and default fetcher:
+
+@lisp
+(pop)
+@end lisp
+
+Fetch from a named server with a named user and password:
+
+@lisp
+(pop :server "my.pop.server"
+ :user "user-name" :password "secret")
+@end lisp
+
+Use @samp{movemail} to move the mail:
+
+@lisp
+(pop :program "movemail po:%u %t %p")
+@end lisp
+
+@item maildir
+Get mail from a maildir. This is a type of mailbox currently only
+supported by qmail, where each file in a special directory contains
+exactly one mail.
+
+Keywords:
+
+@table @code
+@item :path
+The path of the directory where the mails are stored. The default is
+@samp{~/Maildir/new}.
+
+If you sometimes look at your mail through a pop3 daemon before fetching
+them with Gnus, you may also have to fetch your mails from the
+@code{cur} directory inside the maildir, like in the following example.
+
+@end table
+
+An example maildir mail source:
+
+@lisp
+(maildir :path "/home/user-name/Maildir/cur")
+@end lisp
+
+@end table
+
+
+@node Mail Source Customization
+@subsubsection Mail Source Customization
+
+The following is a list of variables that influence how the mail is
+fetched. You would normally not need to set or change any of these
+variables.
+
+@table @code
+@item mail-source-crash-box
+@vindex mail-source-crash-box
+File where mail will be stored while processing it. The default is
+@file{~/.emacs-mail-crash-box}.
+
+@item mail-source-delete-incoming
+@vindex mail-source-delete-incoming
+If non-@code{nil}, delete incoming files after handling them.
+
+@item mail-source-directory
+@vindex mail-source-directory
+Directory where files (if any) will be stored. The default is
+@file{~/Mail/}. At present, the only thing this is used for is to say
+where the incoming files will be stored if the previous variable is
+@code{nil}.
+
+@item mail-source-default-file-modes
+@vindex mail-source-default-file-modes
+All new mail files will get this file mode. The default is 384.
+
+@end table
+
+
+@node Fetching Mail
+@subsubsection Fetching Mail
+
+@vindex mail-sources
@vindex nnmail-spool-file
-@item nnmail-spool-file
-@cindex POP mail
-@cindex MAILHOST
-@cindex movemail
-@vindex nnmail-pop-password
-@vindex nnmail-pop-password-required
-The backends will look for new mail in this file. If this variable is
+The way to actually tell Gnus where to get new mail from is to set
+@code{mail-sources} to a list of mail source specifiers
+(@pxref{Mail Source Specifiers}).
+
+If this variable (and the obsolescent @code{nnmail-spool-file}) is
@code{nil}, the mail backends will never attempt to fetch mail by
-themselves. If you are using a POP mail server and your name is
-@samp{larsi}, you should set this variable to @samp{po:larsi}. If
-your name is not @samp{larsi}, you should probably modify that
-slightly, but you may have guessed that already, you smart & handsome
-devil! You can also set this variable to @code{pop}, and Gnus will try
-to figure out the POP mail string by itself. In any case, Gnus will
-call @code{movemail} which will contact the POP server named in the
-@code{MAILHOST} environment variable. If the POP server needs a
-password, you can either set @code{nnmail-pop-password-required} to
-@code{t} and be prompted for the password, or set
-@code{nnmail-pop-password} to the password itself.
-
-@code{nnmail-spool-file} can also be a list of mailboxes.
-
-Your Emacs has to have been configured with @samp{--with-pop} before
-compilation. This is the default, but some installations have it
-switched off.
+themselves.
+
+If you want to fetch mail both from your local spool as well as a POP
+mail server, you'd say something like:
+
+@lisp
+(setq mail-sources
+ '((file)
+ (pop :server "pop3.mail.server"
+ :password "secret")))
+@end lisp
+
+Or, if you don't want to use any of the keyword defaults:
+
+@lisp
+(setq mail-sources
+ '((file :path "/var/spool/mail/user-name")
+ (pop :server "pop3.mail.server"
+ :user "user-name"
+ :port "pop3"
+ :password "secret")))
+@end lisp
+
When you use a mail backend, Gnus will slurp all your mail from your
inbox and plonk it down in your home directory. Gnus doesn't move any
pentagram, lightened the candles, and sacrificed the goat, you really
shouldn't be too surprised when Gnus moves your mail.
-@vindex nnmail-use-procmail
-@vindex nnmail-procmail-suffix
-@item nnmail-use-procmail
-If non-@code{nil}, the mail backends will look in
-@code{nnmail-procmail-directory} for incoming mail. All the files in
-that directory that have names ending in @code{nnmail-procmail-suffix}
-will be considered incoming mailboxes, and will be searched for new
-mail.
-@vindex nnmail-crash-box
-@item nnmail-crash-box
-When a mail backend reads a spool file, mail is first moved to this
-file, which is @file{~/.gnus-crash-box} by default. If this file
-already exists, it will always be read (and incorporated) before any
-other spool files.
-@vindex nnmail-prepare-incoming-hook
-@item nnmail-prepare-incoming-hook
-This is run in a buffer that holds all the new incoming mail, and can be
-used for, well, anything, really.
+@node Mail Backend Variables
+@subsection Mail Backend Variables
+
+These variables are (for the most part) pertinent to all the various
+mail backends.
+
+@table @code
+@vindex nnmail-read-incoming-hook
+@item nnmail-read-incoming-hook
+The mail backends all call this hook after reading new mail. You can
+use this hook to notify any mail watch programs, if you want to.
@vindex nnmail-split-hook
@item nnmail-split-hook
-@findex article-decode-rfc1522
+@findex article-decode-encoded-words
@findex RFC1522 decoding
+@findex RFC2047 decoding
Hook run in the buffer where the mail headers of each message is kept
just before the splitting based on these headers is done. The hook is
free to modify the buffer contents in any way it sees fit---the buffer
is discarded after the splitting has been done, and no changes performed
-in the buffer will show up in any files. @code{gnus-article-decode-rfc1522}
-is one likely function to add to this hook.
+in the buffer will show up in any files.
+@code{gnus-article-decode-encoded-words} is one likely function to add
+to this hook.
@vindex nnmail-pre-get-new-mail-hook
@vindex nnmail-post-get-new-mail-hook
(lambda () (set-default-file-modes 551)))
@end lisp
-@item nnmail-tmp-directory
-@vindex nnmail-tmp-directory
-This variable says where to move incoming mail to -- while processing
-it. This is usually done in the same directory that the mail backend
-inhabits (e.g., @file{~/Mail/}), but if this variable is non-@code{nil},
-it will be used instead.
-
-@item nnmail-movemail-program
-@vindex nnmail-movemail-program
-This program is executed to move mail from the user's inbox to her home
-directory. The default is @samp{movemail}.
-
-This can also be a function. In that case, the function will be called
-with two parameters -- the name of the inbox, and the file to be moved
-to.
-
-@item nnmail-delete-incoming
-@vindex nnmail-delete-incoming
-@cindex incoming mail files
-@cindex deleting incoming files
-If non-@code{nil}, the mail backends will delete the temporary incoming
-file after splitting mail into the proper groups. This is @code{t} by
-default.
-
-@c This is @code{nil} by
-@c default for reasons of security.
-
-@c Since Red Gnus is an alpha release, it is to be expected to lose mail.
-(No Gnus release since (ding) Gnus 0.10 (or something like that) have
-lost mail, I think, but that's not the point. (Except certain versions
-of Red Gnus.)) By not deleting the Incoming* files, one can be sure not
-to lose mail -- if Gnus totally whacks out, one can always recover what
-was lost.
-
-You may delete the @file{Incoming*} files at will.
-
@item nnmail-use-long-file-names
@vindex nnmail-use-long-file-names
If non-@code{nil}, the mail backends will use long file and directory
;; Other mailing lists...
(any "procmail@@informatik\\.rwth-aachen\\.de" "procmail.list")
(any "SmartList@@informatik\\.rwth-aachen\\.de" "SmartList.list")
+ ;; Both lists below have the same suffix, so prevent
+ ;; cross-posting to mkpkg.list of messages posted only to
+ ;; the bugs- list, but allow cross-posting when the
+ ;; message was really cross-posted.
+ (any "bugs-mypackage@@somewhere" "mypkg.bugs")
+ (any "mypackage@@somewhere\" - "bugs-mypackage" "mypkg.list")
;; People...
(any "larsi@@ifi\\.uio\\.no" "people.Lars_Magne_Ingebrigtsen"))
;; Unmatched mail goes to the catch all group.
@item
@samp{group}: If the split is a string, that will be taken as a group
name. Normal regexp match expansion will be done. See below for
-examples.
+examples.
@item
-@var{(FIELD VALUE SPLIT)}: If the split is a list, the first element of
-which is a string, then store the message as specified by SPLIT, if
-header FIELD (a regexp) contains VALUE (also a regexp).
+@var{(FIELD VALUE [- RESTRICT [- RESTRICT [...]]] SPLIT)}: If the split
+is a list, the first element of which is a string, then store the
+message as specified by SPLIT, if header FIELD (a regexp) contains VALUE
+(also a regexp). If RESTRICT (yet another regexp) matches some string
+after FIELD and before the end of the matched VALUE, the SPLIT is
+ignored. If none of the RESTRICT clauses match, SPLIT is processed.
@item
@var{(| SPLIT...)}: If the split is a list, and the first element is
a SPLIT.
@item
+@var{(! FUNC SPLIT)}: If the split is a list, and the first element
+is @code{!}, then SPLIT will be processed, and FUNC will be called as a
+function with the result of SPLIT as argument. FUNC should return a split.
+
+@item
@code{nil}: If the split is @code{nil}, it is ignored.
@end enumerate
(any "debian-\\b\\(\\w+\\)@@lists.debian.org" "mail.debian.\\1")
@end example
+In this example, messages sent to @samp{debian-foo@@lists.debian.org}
+will be filed in @samp{mail.debian.foo}.
+
If the string contains the element @samp{\&}, then the previously
matched string will be substituted. Similarly, the elements @samp{\\1}
-up to @samp{\\9} will be substituted with the text matched by the
-groupings 1 through 9.
-
-
-@node Mail and Procmail
-@subsection Mail and Procmail
-@cindex procmail
-
-@cindex slocal
-@cindex elm
-Many people use @code{procmail} (or some other mail filter program or
-external delivery agent---@code{slocal}, @code{elm}, etc) to split
-incoming mail into groups. If you do that, you should set
-@code{nnmail-spool-file} to @code{procmail} to ensure that the mail
-backends never ever try to fetch mail by themselves.
-
-If you have a combined @code{procmail}/POP/mailbox setup, you can do
-something like the following:
-
-@vindex nnmail-use-procmail
-@lisp
-(setq nnmail-use-procmail t)
-(setq nnmail-spool-file
- '("/usr/spool/mail/my-name" "po:my-name"))
-@end lisp
-
-This also means that you probably don't want to set
-@code{nnmail-split-methods} either, which has some, perhaps, unexpected
-side effects.
-
-When a mail backend is queried for what groups it carries, it replies
-with the contents of that variable, along with any groups it has figured
-out that it carries by other means. None of the backends, except
-@code{nnmh}, actually go out to the disk and check what groups actually
-exist. (It's not trivial to distinguish between what the user thinks is
-a basis for a newsgroup and what is just a plain old file or directory.)
+up to @samp{\\9} will be substituted with the text matched by the
+groupings 1 through 9.
-This means that you have to tell Gnus (and the backends) by hand what
-groups exist.
-Let's take the @code{nnmh} backend as an example:
+@node Group Mail Splitting
+@subsection Group Mail Splitting
+@cindex mail splitting
+@cindex group mail splitting
+
+@findex gnus-group-split
+If you subscribe to dozens of mailing lists but you don't want to
+maintain mail splitting rules manually, group mail splitting is for you.
+You just have to set @var{to-list} and/or @var{to-address} in group
+parameters or group customization and set @code{nnmail-split-methods} to
+@code{gnus-group-split}. This splitting function will scan all groups
+for those parameters and split mail accordingly, i.e., messages posted
+from or to the addresses specified in the parameters @var{to-list} or
+@var{to-address} of a mail group will be stored in that group.
+
+Sometimes, mailing lists have multiple addresses, and you may want mail
+splitting to recognize them all: just set the @var{extra-aliases} group
+parameter to the list of additional addresses and it's done. If you'd
+rather use a regular expression, set @var{split-regexp}.
+
+All these parameters in a group will be used to create an
+@code{nnmail-split-fancy} split, in which the @var{FIELD} is @samp{any},
+the @var{VALUE} is a single regular expression that matches
+@var{to-list}, @var{to-address}, all of @var{extra-aliases} and all
+matches of @var{split-regexp}, and the @var{SPLIT} is the name of the
+group. @var{RESTRICT}s are also supported: just set the
+@var{split-exclude} parameter to a list of regular expressions.
+
+If you can't get the right split to be generated using all these
+parameters, or you just need something fancier, you can set the
+parameter @var{split-spec} to an @code{nnmail-split-fancy} split. In
+this case, all other aforementioned parameters will be ignored by
+@code{gnus-group-split}. In particular, @var{split-spec} may be set to
+@code{nil}, in which case the group will be ignored by
+@code{gnus-group-split}.
+
+@vindex gnus-group-split-default-catch-all-group
+@code{gnus-group-split} will do cross-posting on all groups that match,
+by defining a single @code{&} fancy split containing one split for each
+group. If a message doesn't match any split, it will be stored in the
+group named in @code{gnus-group-split-default-catch-all-group}, unless
+some group has @var{split-spec} set to @code{catch-all}, in which case
+that group is used as the catch-all group. Note that, in this case,
+there's no cross-posting, as a @code{|} fancy split encloses the
+@code{&} split and the catch-all group.
+
+It's time for an example. Assume the following group parameters have
+been defined:
-The folders are located in @code{nnmh-directory}, say, @file{~/Mail/}.
-There are three folders, @file{foo}, @file{bar} and @file{mail.baz}.
+@example
+nnml:mail.bar:
+((to-address . "bar@@femail.com")
+ (split-regexp . ".*@@femail\\.com"))
+nnml:mail.foo:
+((to-list . "foo@@nowhere.gov")
+ (extra-aliases "foo@@localhost" "foo-redist@@home")
+ (split-exclude "bugs-foo" "rambling-foo")
+ (admin-address . "foo-request@@nowhere.gov"))
+nnml:mail.others:
+((split-spec . catch-all))
+@end example
-Go to the group buffer and type @kbd{G m}. When prompted, answer
-@samp{foo} for the name and @samp{nnmh} for the method. Repeat
-twice for the two other groups, @samp{bar} and @samp{mail.baz}. Be sure
-to include all your mail groups.
+Setting @code{nnmail-split-methods} to @code{gnus-group-split} will
+behave as if @code{nnmail-split-fancy} had been selected and variable
+@code{nnmail-split-fancy} had been set as follows:
-That's it. You are now set to read your mail. An active file for this
-method will be created automatically.
+@lisp
+(| (& (any "\\(bar@@femail\\.com\\|.*@@femail\\.com\\)" "mail.bar")
+ (any "\\(foo@@nowhere\\.gov\\|foo@@localhost\\|foo-redist@@home\\)"
+ - "bugs-foo" - "rambling-foo" "mail.foo"))
+ "mail.others")
+@end lisp
-@vindex nnmail-procmail-suffix
-@vindex nnmail-procmail-directory
-If you use @code{nnfolder} or any other backend that store more than a
-single article in each file, you should never have procmail add mails to
-the file that Gnus sees. Instead, procmail should put all incoming mail
-in @code{nnmail-procmail-directory}. To arrive at the file name to put
-the incoming mail in, append @code{nnmail-procmail-suffix} to the group
-name. The mail backends will read the mail from these files.
+@findex gnus-group-split-fancy
+If you'd rather not use group splitting for all your mail groups, you
+may use it for only some of them, by using @code{nnmail-split-fancy}
+splits like this:
-@vindex nnmail-resplit-incoming
-When Gnus reads a file called @file{mail.misc.spool}, this mail will be
-put in the @code{mail.misc}, as one would expect. However, if you want
-Gnus to split the mail the normal way, you could set
-@code{nnmail-resplit-incoming} to @code{t}.
+@lisp
+(: gnus-mlsplt-fancy GROUPS NO-CROSSPOST CATCH-ALL)
+@end lisp
-@vindex nnmail-keep-last-article
-If you use @code{procmail} to split things directly into an @code{nnmh}
-directory (which you shouldn't do), you should set
-@code{nnmail-keep-last-article} to non-@code{nil} to prevent Gnus from
-ever expiring the final article (i.e., the article with the highest
-article number) in a mail newsgroup. This is quite, quite important.
-
-Here's an example setup: The incoming spools are located in
-@file{~/incoming/} and have @samp{""} as suffixes (i.e., the incoming
-spool files have the same names as the equivalent groups). The
-@code{nnfolder} backend is to be used as the mail interface, and the
-@code{nnfolder} directory is @file{~/fMail/}.
+@var{GROUPS} may be a regular expression or a list of group names whose
+parameters will be scanned to generate the output split.
+@var{NO-CROSSPOST} can be used to disable cross-posting; in this case, a
+single @code{|} split will be output. @var{CATCH-ALL} may be the name
+of a group to be used as the default catch-all group. If
+@var{CATCH-ALL} is @code{nil}, or if @var{SPLIT-REGEXP} matches the
+empty string in any selected group, no catch-all split will be issued.
+Otherwise, if some group has @var{SPLIT-SPEC} set to @code{catch-all},
+this group will override the value of the @var{CATCH-ALL} argument.
+
+@findex gnus-group-split-setup
+Unfortunately, scanning all groups and their parameters can be quite
+slow, especially considering that it has to be done for every message.
+But don't despair! The function @code{gnus-group-split-setup} can be
+used to select @code{gnus-group-split} in a much more efficient way. It
+sets @code{nnmail-split-methods} to @code{nnmail-split-fancy} and sets
+@code{nnmail-split-fancy} to the split produced by
+@code{gnus-group-split-fancy}. Thus, the group parameters are only
+scanned once, no matter how many messages are split.
+
+@findex gnus-group-split-update
+However, if you change group parameters, you have to update
+@code{nnmail-split-fancy} manually. You can do it by running
+@code{gnus-group-split-update}. If you'd rather have it updated
+automatically, just tell @code{gnus-group-split-setup} to do it for
+you. For example, add to your @file{.gnus}:
@lisp
-(setq nnfolder-directory "~/fMail/")
-(setq nnmail-spool-file 'procmail)
-(setq nnmail-procmail-directory "~/incoming/")
-(setq gnus-secondary-select-methods '((nnfolder "")))
-(setq nnmail-procmail-suffix "")
+(gnus-group-split-setup AUTO-UPDATE CATCH-ALL)
@end lisp
+If @var{AUTO-UPDATE} is non-@code{nil}, @code{gnus-group-split-update}
+will be added to @code{nnmail-pre-get-new-mail-hook}, so you won't ever
+have to worry about updating @code{nnmail-split-fancy} again. If you
+don't omit @var{CATCH-ALL} (it's optional),
+@code{gnus-group-split-default-catch-all-group} will be set to its
+value.
+
+@vindex gnus-group-split-updated-hook
+Because you may want to change @code{nnmail-split-fancy} after it is set
+by @code{gnus-group-split-update}, this function will run
+@code{gnus-group-split-updated-hook} just before finishing.
@node Incorporating Old Mail
@subsection Incorporating Old Mail
Most people make most of their mail groups total-expirable, though.
+@vindex gnus-inhibit-user-auto-expire
+If @code{gnus-inhibit-user-auto-expire} is non-@code{nil}, user marking
+commands will not mark an article as expirable, even if the group has
+auto-expire turned on.
+
@node Washing Mail
@subsection Washing Mail
@item nnmail-prepare-incoming-hook
@vindex nnmail-prepare-incoming-hook
This hook is called before doing anything with the mail and is meant for
-grand, sweeping gestures. Functions to be used include:
+grand, sweeping gestures. It is called in a buffer that contains all
+the new, incoming mail. Functions to be used include:
@table @code
@item nnheader-ms-strip-cr
'("(idm)" "nagnagnag"))
@end lisp
+This can also be done non-destructively with
+@code{gnus-list-identifiers}, @xref{Article Hiding}.
+
@item nnmail-remove-tabs
@findex nnmail-remove-tabs
Translate all @samp{TAB} characters into @samp{SPACE} characters.
+@item nnmail-fix-eudora-headers
+@findex nnmail-fix-eudora-headers
+@cindex Eudora
+Eudora produces broken @code{References} headers, but OK
+@code{In-Reply-To} headers. This function will get rid of the
+@code{References} headers.
+
@end table
@item nnmail-prepare-incoming-message-hook
habit of assuming that you want to read mail with them. This might not
be unreasonable, but it might not be what you want.
-If you set @code{nnmail-spool-file} to @code{nil}, none of the backends
-will ever attempt to read incoming mail, which should help.
+If you set @code{mail-sources} and @code{nnmail-spool-file} to
+@code{nil}, none of the backends will ever attempt to read incoming
+mail, which should help.
@vindex nnbabyl-get-new-mail
@vindex nnmbox-get-new-mail
file is first copied to your home directory. What happens after that
depends on what format you want to store your mail in.
+There are five different mail backends in the standard Gnus, and more
+backends are available separately. The mail backend most people use
+(because it is the fastest and most flexible) is @code{nnml}
+(@pxref{Mail Spool}).
+
@menu
* Unix Mail Box:: Using the (quite) standard Un*x mbox.
* Rmail Babyl:: Emacs programs use the rmail babyl format.
* Mail Spool:: Store your mail in a private spool?
* MH Spool:: An mhspool-like backend.
* Mail Folders:: Having one file for each group.
+* Comparing Mail Backends:: An in-depth looks at pros and cons.
@end menu
@item nnfolder-get-new-mail
@vindex nnfolder-get-new-mail
If non-@code{nil}, @code{nnfolder} will read incoming mail.
+
+@item nnfolder-save-buffer-hook
+@vindex nnfolder-save-buffer-hook
+@cindex backup files
+Hook run before saving the folders. Note that Emacs does the normal
+backup renaming of files even with the @code{nnfolder} buffers. If you
+wish to switch this off, you could say something like the following in
+your @file{.emacs} file:
+
+@lisp
+(defun turn-off-backup ()
+ (set (make-local-variable 'backup-inhibited) t))
+
+(add-hook 'nnfolder-save-buffer-hook 'turn-off-backup)
+@end lisp
+
+@item nnfolder-delete-mail-hook
+@vindex nnfolder-delete-mail-hook
+Hook run in a buffer narrowed to the message that is to be deleted.
+This function can be used to copy the message to somewhere else, or to
+extract some information from it before removing it.
+
@end table
+
@findex nnfolder-generate-active-file
@kindex M-x nnfolder-generate-active-file
If you have lots of @code{nnfolder}-like files you'd like to read with
@code{nnfolder}, you can use the @kbd{M-x nnfolder-generate-active-file}
command to make @code{nnfolder} aware of all likely files in
-@code{nnfolder-directory}.
+@code{nnfolder-directory}. This only works if you use long file names,
+though.
+
+@node Comparing Mail Backends
+@subsubsection Comparing Mail Backends
+
+First, just for terminology, the @dfn{backend} is the common word for a
+low-level access method---a transport, if you will, by which something
+is acquired. The sense is that one's mail has to come from somewhere,
+and so selection of a suitable backend is required in order to get that
+mail within spitting distance of Gnus.
+
+The same concept exists for Usenet itself: Though access to articles is
+typically done by NNTP these days, once upon a midnight dreary, everyone
+in the world got at Usenet by running a reader on the machine where the
+articles lay (the machine which today we call an NNTP server), and
+access was by the reader stepping into the articles' directory spool
+area directly. One can still select between either the @code{nntp} or
+@code{nnspool} backends, to select between these methods, if one happens
+actually to live on the server (or can see its spool directly, anyway,
+via NFS).
+
+The goal in selecting a mail backend is to pick one which
+simultaneously represents a suitable way of dealing with the original
+format plus leaving mail in a form that is convenient to use in the
+future. Here are some high and low points on each:
+
+@table @code
+@item nnmbox
+
+UNIX systems have historically had a single, very common, and well-
+defined format. All messages arrive in a single @dfn{spool file}, and
+they are delineated by a line whose regular expression matches
+@samp{^From_}. (My notational use of @samp{_} is to indicate a space,
+to make it clear in this instance that this is not the RFC-specified
+@samp{From:} header.) Because Emacs and therefore Gnus emanate
+historically from the Unix environment, it is simplest if one does not
+mess a great deal with the original mailbox format, so if one chooses
+this backend, Gnus' primary activity in getting mail from the real spool
+area to Gnus' preferred directory is simply to copy it, with no
+(appreciable) format change in the process. It is the ``dumbest'' way
+to move mail into availability in the Gnus environment. This makes it
+fast to move into place, but slow to parse, when Gnus has to look at
+what's where.
+
+@item nnbabyl
+
+Once upon a time, there was the DEC-10 and DEC-20, running operating
+systems called TOPS and related things, and the usual (only?) mail
+reading environment was a thing called Babyl. I don't know what format
+was used for mail landing on the system, but Babyl had its own internal
+format to which mail was converted, primarily involving creating a
+spool-file-like entity with a scheme for inserting Babyl-specific
+headers and status bits above the top of each message in the file.
+RMAIL was Emacs' first mail reader, it was written by Richard Stallman,
+and Stallman came out of that TOPS/Babyl environment, so he wrote RMAIL
+to understand the mail files folks already had in existence. Gnus (and
+VM, for that matter) continue to support this format because it's
+perceived as having some good qualities in those mailer-specific
+headers/status bits stuff. RMAIL itself still exists as well, of
+course, and is still maintained by Stallman.
+
+Both of the above forms leave your mail in a single file on your
+filesystem, and they must parse that entire file each time you take a
+look at your mail.
+
+@item nnml
+
+@code{nnml} is the backend which smells the most as though you were
+actually operating with an @code{nnspool}-accessed Usenet system. (In
+fact, I believe @code{nnml} actually derived from @code{nnspool} code,
+lo these years ago.) One's mail is taken from the original spool file,
+and is then cut up into individual message files, 1:1. It maintains a
+Usenet-style active file (analogous to what one finds in an INN- or
+CNews-based news system in (for instance) @file{/var/lib/news/active},
+or what is returned via the @samp{NNTP LIST} verb) and also creates
+@dfn{overview} files for efficient group entry, as has been defined for
+@sc{nntp} servers for some years now. It is slower in mail-splitting,
+due to the creation of lots of files, updates to the @code{nnml} active
+file, and additions to overview files on a per-message basis, but it is
+extremely fast on access because of what amounts to the indexing support
+provided by the active file and overviews.
+
+@code{nnml} costs @dfn{inodes} in a big way; that is, it soaks up the
+resource which defines available places in the filesystem to put new
+files. Sysadmins take a dim view of heavy inode occupation within
+tight, shared filesystems. But if you live on a personal machine where
+the filesystem is your own and space is not at a premium, @code{nnml}
+wins big.
+
+It is also problematic using this backend if you are living in a
+FAT16-based Windows world, since much space will be wasted on all these
+tiny files.
+
+@item nnmh
+
+The Rand MH mail-reading system has been around UNIX systems for a very
+long time; it operates by splitting one's spool file of messages into
+individual files, but with little or no indexing support -- @code{nnmh}
+is considered to be semantically equivalent to ``@code{nnml} without
+active file or overviews''. This is arguably the worst choice, because
+one gets the slowness of individual file creation married to the
+slowness of access parsing when learning what's new in one's groups.
+
+@item nnfolder
+
+Basically the effect of @code{nnfolder} is @code{nnmbox} (the first
+method described above) on a per-group basis. That is, @code{nnmbox}
+itself puts *all* one's mail in one file; @code{nnfolder} provides a
+little bit of optimization to this so that each of one's mail groups has
+a Unix mail box file. It's faster than @code{nnmbox} because each group
+can be parsed separately, and still provides the simple Unix mail box
+format requiring minimal effort in moving the mail around. In addition,
+it maintains an ``active'' file making it much faster for Gnus to figure
+out how many messages there are in each separate group.
+
+If you have groups that are expected to have a massive amount of
+messages, @code{nnfolder} is not the best choice, but if you receive
+only a moderate amount of mail, @code{nnfolder} is probably the most
+friendly mail backend all over.
+
+@end table
+
@node Other Sources
All files that match this regexp will be ignored. Nice to use to exclude
auto-save files and the like, which is what it does by default.
+@item nneething-include-files
+@vindex nneething-include-files
+Regexp saying what files to include in the group. If this variable is
+non-@code{nil}, only files matching this regexp will be included.
+
@item nneething-map-file
@vindex nneething-map-file
Name of the map files.
@item forward
Forwarded articles.
-@item mime-parts
-MIME multipart messages, besides digests.
+@item nsmail
+Netscape mail boxes.
-@item mime-digest
-@cindex digest
-@cindex MIME digest
-@cindex 1153 digest
-@cindex RFC 1153 digest
-@cindex RFC 341 digest
-MIME (RFC 1341) digest format.
+@item mime-parts
+MIME multipart messages.
@item standard-digest
The standard (RFC 1153) digest format.
@vindex nndoc-article-type
This should be one of @code{mbox}, @code{babyl}, @code{digest},
@code{news}, @code{rnews}, @code{mmdf}, @code{forward}, @code{rfc934},
-@code{rfc822-forward}, @code{mime-parts}, @code{mime-digest},
-@code{standard-digest}, @code{slack-digest}, @code{clari-briefs} or
-@code{guess}.
+@code{rfc822-forward}, @code{mime-parts}, @code{standard-digest},
+@code{slack-digest}, @code{clari-briefs}, @code{nsmail} or @code{guess}.
@item nndoc-post-type
@vindex nndoc-post-type
Or you can just tap @code{M-g} on the virtual group every time before
you enter it---it'll have much the same effect.
+@code{nnvirtual} can have both mail and news groups as component groups.
+When responding to articles in @code{nnvirtual} groups, @code{nnvirtual}
+has to ask the backend of the component group the article comes from
+whether it is a news or mail backend. However, when you do a @kbd{^},
+there is typically no sure way for the component backend to know this,
+and in that case @code{nnvirtual} tells Gnus that the article came from a
+not-news backend. (Just to be on the safe side.)
+
+@kbd{C-c C-t} in the message buffer will insert the @code{Newsgroups}
+line from the article you respond to in these cases.
+
+
@node Kibozed Groups
@subsection Kibozed Groups
* Agent Variables:: Customizing is fun.
* Example Setup:: An example @file{.gnus.el} file for offline people.
* Batching Agents:: How to fetch news from a @code{cron} job.
+* Agent Caveats:: What you think it'll do and what it does.
@end menu
primary select method, which is listed on the bottom in the buffer.
@item
-Decide on download policy. @xref{Agent Categories}
+Decide on download policy. @xref{Agent Categories}.
@item
Uhm... that's it.
The main way to control what is to be downloaded is to create a
@dfn{category} and then assign some (or all) groups to this category.
-Gnus has its own buffer for creating and managing categories.
+Groups that do not belong in any other category belong to the
+@code{default} category. Gnus has its own buffer for creating and
+managing categories.
@menu
* Category Syntax:: What a category looks like.
@item
a score rule which (generally) gives you a finer granularity when
deciding what articles to download. (Note that this @dfn{download
-score} is wholly unrelated to normal scores.)
+score} is not necessarily related to normal scores.)
@end enumerate
-A predicate consists of predicates with logical operators sprinkled in
-between.
+A predicate in its simplest form can be a single predicate such as
+@code{true} or @code{false}. These two will download every available
+article or nothing respectively. In the case of these two special
+predicates an additional score rule is superfluous.
+
+Predicates of @code{high} or @code{low} download articles in respect of
+their scores in relationship to @code{gnus-agent-high-score} and
+@code{gnus-agent-low-score} as descibed below.
+
+To gain even finer control of what is to be regarded eligible for
+download a predicate can consist of a number of predicates with logical
+operators sprinkled in between.
Perhaps some examples are in order.
@code{gnus-headers} and @code{gnus-score} dynamic variables are bound to
useful values.
+For example, you could decide that you don't want to download articles
+that were posted more than a certain number of days ago (e.g. posted
+more than @code{gnus-agent-expire-days} ago) you might write a function
+something along the lines of the following:
+
+@lisp
+(defun my-article-old-p ()
+ "Say whether an article is old."
+ (< (time-to-days (date-to-time (mail-header-date gnus-headers)))
+ (- (time-to-days (current-time)) gnus-agent-expire-days)))
+@end lisp
+
+with the predicate then defined as:
+
+@lisp
+(not my-article-old-p)
+@end lisp
+
+or you could append your predicate to the predefined
+@code{gnus-category-predicate-alist} in your @file{~/.gnus.el} or
+wherever. (Note: this would have to be at a point *after*
+@code{gnus-agent} has been loaded via @code{(gnus-agentize)})
+
+@lisp
+(defvar gnus-category-predicate-alist
+ (append gnus-category-predicate-alist
+ '((old . my-article-old-p))))
+@end lisp
+
+and simply specify your predicate as:
+
+@lisp
+(not old)
+@end lisp
+
+If/when using something like the above, be aware that there are many
+misconfigured systems/mailers out there and so an article's date is not
+always a reliable indication of when it was posted. Hell, some people
+just don't give a damm.
+
+
+The above predicates apply to *all* the groups which belong to the
+category. However, if you wish to have a specific predicate for an
+individual group within a category, or you're just too lazy to set up a
+new category, you can enter a group's individual predicate in it's group
+parameters like so:
+
+@lisp
+(agent-predicate . short)
+@end lisp
+
+This is the group parameter equivalent of the agent category
+default. Note that when specifying a single word predicate like this,
+the @code{agent-predicate} specification must be in dotted pair
+notation.
+
+The equivalent of the longer example from above would be:
+
+@lisp
+(agent-predicate or high (and (not low) (not long)))
+@end lisp
+
+The outer parenthesis required in the category specification are not
+entered here as, not being in dotted pair notation, the value of the
+predicate is assumed to be a list.
+
+
Now, the syntax of the download score is the same as the syntax of
normal score files, except that all elements that require actually
seeing the article itself are verboten. This means that only the
-following headers can be scored on: @code{From}, @code{Subject},
-@code{Date}, @code{Xref}, @code{Lines}, @code{Chars}, @code{Message-ID},
-and @code{References}.
+following headers can be scored on: @code{Subject}, @code{From},
+@code{Date}, @code{Message-ID}, @code{References}, @code{Chars},
+@code{Lines}, and @code{Xref}.
+
+As with predicates, the specification of the @code{download score rule}
+to use in respect of a group can be in either the category definition if
+it's to be applicable to all groups in therein, or a group's parameters
+if it's to be specific to that group.
+
+In both of these places the @code{download score rule} can take one of
+three forms:
+
+@enumerate
+@item
+Score rule
+
+This has the same syntax as a normal gnus score file except only a
+subset of scoring keywords are available as mentioned above.
+
+example:
+
+@itemize @bullet
+@item
+Category specification
+
+@lisp
+(("from"
+ ("Lars Ingebrigtsen" 1000000 nil s))
+("lines"
+ (500 -100 nil <)))
+@end lisp
+
+@item
+Group Parameter specification
+
+@lisp
+(agent-score ("from"
+ ("Lars Ingebrigtsen" 1000000 nil s))
+ ("lines"
+ (500 -100 nil <)))
+@end lisp
+
+Again, note the omission of the outermost parenthesis here.
+@end itemize
+
+@item
+Agent score file
+
+These score files must *only* contain the permitted scoring keywords
+stated above.
+
+example:
+
+@itemize @bullet
+@item
+Category specification
+
+@lisp
+("~/News/agent.SCORE")
+@end lisp
+
+or perhaps
+
+@lisp
+("~/News/agent.SCORE" "~/News/agent.group.SCORE")
+@end lisp
+
+@item
+Group Parameter specification
+
+@lisp
+(agent-score "~/News/agent.SCORE")
+@end lisp
+
+Additional score files can be specified as above. Need I say anything
+about parenthesis.
+@end itemize
+
+@item
+Use @code{normal} score files
+
+If you dont want to maintain two sets of scoring rules for a group, and
+your desired @code{downloading} criteria for a group are the same as your
+@code{reading} criteria then you can tell the agent to refer to your
+@code{normal} score files when deciding what to download.
+
+These directives in either the category definition or a group's
+parameters will cause the agent to read in all the applicable score
+files for a group, *filtering out* those those sections that do not
+relate to one of the permitted subset of scoring keywords.
+
+@itemize @bullet
+@item
+Category Specification
+
+@lisp
+file
+@end lisp
+
+@item
+Group Parameter specification
+@lisp
+(agent-score . file)
+@end lisp
+@end itemize
+@end enumerate
@node The Category Buffer
@subsubsection The Category Buffer
@kindex J S (Agent Group)
@findex gnus-group-send-drafts
Send all sendable messages in the draft group
-(@code{gnus-agent-fetch-session}). @xref{Drafts}
+(@code{gnus-group-send-drafts}). @xref{Drafts}.
@item J a
@kindex J a (Agent Group)
@findex gnus-agent-add-group
Add the current group to an Agent category
-(@code{gnus-agent-add-group}).
+(@code{gnus-agent-add-group}). This command understands the
+process/prefix convention (@pxref{Process/Prefix}).
+
+@item J r
+@kindex J r (Agent Group)
+@findex gnus-agent-remove-group
+Remove the current group from its category, if any
+(@code{gnus-agent-remove-group}). This command understands the
+process/prefix convention (@pxref{Process/Prefix}).
@end table
Remove the downloading mark from the article
(@code{gnus-agent-unmark-article}).
-@item @@
+@item @@
@kindex @@ (Agent Summary)
@findex gnus-agent-toggle-mark
Toggle whether to download the article (@code{gnus-agent-toggle-mark}).
@node Agent Expiry
@subsection Agent Expiry
-@vindex gnus-agent-expiry-days
-@findex gnus-agent-expiry
-@kindex M-x gnus-agent-expiry
+@vindex gnus-agent-expire-days
+@findex gnus-agent-expire
+@kindex M-x gnus-agent-expire
@cindex Agent expiry
@cindex Gnus Agent expiry
@cindex expiry
@code{nnagent} doesn't handle expiry. Instead, there's a special
-@code{gnus-agent-expiry} command that will expire all read articles that
-are older than @code{gnus-agent-expiry-days} days. It can be run
+@code{gnus-agent-expire} command that will expire all read articles that
+are older than @code{gnus-agent-expire-days} days. It can be run
whenever you feel that you're running out of space. It's not
particularly fast or efficient, and it's not a particularly good idea to
interrupt it (with @kbd{C-g} or anything else) once you've started it.
@lisp
;;; Define how Gnus is to fetch news. We do this over NNTP
;;; from your ISP's server.
-(setq gnus-select-method '(nntp "nntp.your-isp.com"))
+(setq gnus-select-method '(nntp "news.your-isp.com"))
;;; Define how Gnus is to read your mail. We read mail from
;;; your ISP's POP server.
-(setenv "MAILHOST" "pop.your-isp.com")
-(setq nnmail-spool-file "po:username")
+(setq mail-sources '((pop :server "pop.your-isp.com")))
;;; Say how Gnus is to store the mail. We use nnml groups.
(setq gnus-secondary-select-methods '((nnml "")))
@end example
+@node Agent Caveats
+@subsection Agent Caveats
+
+The Gnus Agent doesn't seem to work like most other offline
+newsreaders. Here are some common questions that some imaginary people
+may ask:
+
+@table @dfn
+@item If I read an article while plugged, do they get entered into the
+Agent?
+
+@strong{No.}
+
+@item If I read an article while plugged, and the article already exists
+in the Agent, will it get downloaded once more?
+
+@strong{Yes.}
+
+@end table
+
+In short, when Gnus is unplugged, it only looks into the locally stored
+articles; when it's plugged, it only talks to your ISP.
+
@node Scoring
@chapter Scoring
Score on the subject line.
@item x
-Score on the Xref line---i.e., the cross-posting line.
+Score on the @code{Xref} line---i.e., the cross-posting line.
-@item t
-Score on thread---the References line.
+@item r
+Score on the @code{References} line.
@item d
Score on the date.
Score on the number of lines.
@item i
-Score on the Message-ID.
+Score on the @code{Message-ID} header.
@item f
-Score on followups.
+Score on followups---this matches the author name, and adds scores to
+the followups to this author.
@item b
Score on the body.
@item h
Score on the head.
+
+@item t
+Score on thread.
+
@end table
@item
@findex gnus-batch-score
@cindex batch scoring
@example
-$ emacs -batch -l ~/.emacs -l gnus -f gnus-batch-score
+$ emacs -batch -l ~/.emacs -l ~/.gnus.el -f gnus-batch-score
@end example
scoring, then you might set this variable to @code{t}. This will make
Gnus save the scores into the @file{.newsrc.eld} file.
+If you do not set this to @code{t}, then manual scores (like those set
+with @kbd{V s} (@code{gnus-summary-set-score})) will not be preserved
+across group visits.
+
@item gnus-score-interactive-default-score
@vindex gnus-score-interactive-default-score
Score used by all the interactive raise/lower commands to raise/lower
word scoring process will never bring down the score of an article to
below this number. The default is @code{nil}.
+@vindex gnus-adaptive-word-no-group-words
+If @code{gnus-adaptive-word-no-group-words} is set to @code{t}, gnus
+won't adaptively word score any of the words in the group name. Useful
+for groups like @samp{comp.editors.emacs}, where most of the subject
+lines contain the word @samp{emacs}.
+
After using this scheme for a while, it might be nice to write a
@code{gnus-psychoanalyze-user} command to go through the rules and see
what words you like and what words you don't like. Or perhaps not.
the matches.
@item Marking as read
-You will probably want to mark articles that has a score below a certain
+You will probably want to mark articles that have scores below a certain
number as read. This is most easily achieved by putting the following
in your @file{all.SCORE} file:
@lisp
@code{mouse-face} specs---you can say @samp{%3(hello%)} to have
@samp{hello} mouse-highlighted with @code{gnus-mouse-face-3}.
+Text inside the @samp{%<} and @samp{%>} specifiers will get the special
+@code{balloon-help} property set to @code{gnus-balloon-face-0}. If you say
+@samp{%1<}, you'll get @code{gnus-balloon-face-1} and so on. The
+@code{gnus-balloon-face-*} variables should be either strings or
+symbols naming functions that return a string. Under @code{balloon-help-mode},
+when the mouse passes over text with this property set, a balloon window
+will appear and display the string. Please refer to the doc string of
+@code{balloon-help-mode} for more information on this.
+
Here's an alternative recipe for the group buffer:
@lisp
other windows and occupy the entire Emacs screen by itself. It is
@code{t} by default.
+Setting this variable to @code{nil} kinda works, but there are
+glitches. Use at your own peril.
+
@vindex gnus-buffer-configuration
@code{gnus-buffer-configuration} describes how much space each Gnus
buffer should be given. Here's an excerpt of this variable:
Reference Manual}. Under XEmacs, a frame property list will be
accepted, too---for instance, @code{(height 5 width 15 left -1 top 1)}
is such a plist.
-
-Here's a list of all possible keys for
-@code{gnus-buffer-configuration}:
-
-@code{group}, @code{summary}, @code{article}, @code{server},
-@code{browse}, @code{message}, @code{pick}, @code{info},
-@code{summary-faq}, @code{edit-group}, @code{edit-server},
-@code{edit-score}, @code{post}, @code{reply}, @code{forward},
-@code{reply-yank}, @code{mail-bounce}, @code{draft}, @code{pipe},
-@code{bug}, @code{compose-bounce}, and @code{score-trace}.
+The list of all possible keys for @code{gnus-buffer-configuration} can
+be found in its default value.
Note that the @code{message} key is used for both
@code{gnus-group-mail} and @code{gnus-summary-mail-other-window}. If
(group 1.0)))))
@end lisp
+One common desire for a multiple frame split is to have a separate frame
+for composing mail and news while leaving the original frame intact. To
+accomplish that, something like the following can be done:
+
+@lisp
+(message (frame 1.0
+ (if (not (buffer-live-p gnus-summary-buffer))
+ (car (cdr (assoc 'group gnus-buffer-configuration)))
+ (car (cdr (assoc 'summary gnus-buffer-configuration))))
+ (vertical ((user-position . t) (top . 1) (left . 1)
+ (name . "Message"))
+ (message 1.0 point))))
+@end lisp
+
@findex gnus-add-configuration
Since the @code{gnus-buffer-configuration} variable is so long and
complicated, there's a function you can use to ease changing the config
``right'' window configuration, you can set
@code{gnus-always-force-window-configuration} to non-@code{nil}.
+If you're using tree displays (@pxref{Tree Display}), and the tree
+window is displayed vertically next to another window, you may also want
+to fiddle with @code{gnus-tree-minimize-window} to avoid having the
+windows resized.
+
@node Faces and Fonts
@section Faces and Fonts
seconds. This is 60 by default. If you change that variable,
all the timings in the handlers will be affected.)
-@vindex gnus-use-demon
-To set the whole thing in motion, though, you have to set
-@code{gnus-use-demon} to @code{t}.
-
So, if you want to add a handler, you could put something like this in
your @file{.gnus} file:
@lisp
(setq gnus-use-picons t)
-(add-hook 'gnus-article-display-hook
- 'gnus-article-display-picons t)
-(add-hook 'gnus-article-display-hook
- 'gnus-picons-article-display-x-face)
+(setq gnus-treat-display-picons t)
@end lisp
and make sure @code{gnus-picons-database} points to the directory
functions to the appropriate hooks so these pictures will get displayed
at the right time.
-@vindex gnus-article-display-hook
@vindex gnus-picons-display-where
@table @code
@item gnus-article-display-picons
@findex gnus-article-display-picons
Looks up and displays the picons for the author and the author's domain
-in the @code{gnus-picons-display-where} buffer. Should be added to the
-@code{gnus-article-display-hook}.
+in the @code{gnus-picons-display-where} buffer.
@item gnus-picons-article-display-x-face
@findex gnus-article-display-picons
-Decodes and displays the X-Face header if present. This function
-should be added to @code{gnus-article-display-hook}.
+Decodes and displays the X-Face header if present.
@end table
-Note: You must append them to the hook, so make sure to specify 't'
-for the append flag of @code{add-hook}:
-
-@lisp
-(add-hook 'gnus-article-display-hook 'gnus-article-display-picons t)
-@end lisp
@node Picon Useless Configuration
Ordered list of suffixes on picon file names to try. Defaults to
@code{("xpm" "gif" "xbm")} minus those not builtin your XEmacs.
+@item gnus-picons-setup-hook
+@vindex gnus-picons-setup-hook
+Hook run in the picon buffer, if that is displayed.
+
@item gnus-picons-display-article-move-p
@vindex gnus-picons-display-article-move-p
Whether to move point to first empty line when displaying picons. This
has only an effect if `gnus-picons-display-where' has value `article'.
+If @code{nil}, display the picons in the @code{From} and
+@code{Newsgroups} lines. This is the defailt.
+
@item gnus-picons-clear-cache-on-shutdown
@vindex gnus-picons-clear-cache-on-shutdown
Whether to clear the picons cache when exiting gnus. Gnus caches every
@file{.gnus.el} file:
@lisp
-(add-hook 'gnus-article-display-hook 'gnus-smiley-display t)
+(setq gnus-treat-display-smiley t)
@end lisp
Smiley maps text smiley faces---@samp{:-)}, @samp{:-=}, @samp{:-(} and
* Terminology:: We use really difficult, like, words here.
* Customization:: Tailoring Gnus to your needs.
* Troubleshooting:: What you might try if things do not work.
-* A Programmers Guide to Gnus:: Rilly, rilly technical stuff.
+* Gnus Reference Guide:: Rilly, rilly technical stuff.
* Emacs for Heathens:: A short introduction to Emacsian terms.
* Frequently Asked Questions:: A question-and-answer session.
@end menu
* Compatibility:: Just how compatible is Gnus with @sc{gnus}?
* Conformity:: Gnus tries to conform to all standards.
* Emacsen:: Gnus can be run on a few modern Emacsen.
+* Gnus Development:: How Gnus is developed.
* Contributors:: Oodles of people.
* New Features:: Pointers to some of the new stuff in Gnus.
* Newest Features:: Features so new that they haven't been written yet.
@table @emph
-@item MIME
-Gnus does no MIME handling, and this standard-to-be seems to think that
-MIME is the bees' knees, so we have major breakage here.
-
@item X-Newsreader
-This is considered to be a ``vanity header'', while I consider it to be
-consumer information. After seeing so many badly formatted articles
-coming from @code{tin} and @code{Netscape} I know not to use either of
-those for posting articles. I would not have known that if it wasn't
-for the @code{X-Newsreader} header.
+@itemx User-Agent
+These are considered to be ``vanity headers'', while I consider them
+to be consumer information. After seeing so many badly formatted
+articles coming from @code{tin} and @code{Netscape} I know not to use
+either of those for posting articles. I would not have known that if
+it wasn't for the @code{X-Newsreader} header.
@end table
+@item USEFOR
+@cindex USEFOR
+USEFOR is an IETF working group writing a successor to RFC 1036, based
+on Son-of-RFC 1036. They have produced a number of drafts proposing
+various changes to the format of news articles. The Gnus towers will
+look into implementing the changes when the draft is accepted as an RFC.
+
@end table
If you ever notice Gnus acting non-compliant with regards to the texts
@itemize @bullet
@item
-Emacs 19.32 and up.
-
-@item
-XEmacs 19.14 and up.
+Emacs 20.3 and up.
@item
-Mule versions based on Emacs 19.32 and up.
+XEmacs 20.4 and up.
@end itemize
-Gnus will absolutely not work on any Emacsen older than that. Not
-reliably, at least.
+This Gnus version will absolutely not work on any Emacsen older than
+that. Not reliably, at least. Older versions of Gnus may work on older
+Emacs versions.
There are some vague differences between Gnus on the various
platforms---XEmacs features more graphics (a logo and a toolbar)---but
Emacsen.
+@node Gnus Development
+@subsection Gnus Development
+
+Gnus is developed in a two-phased cycle. The first phase involves much
+discussion on the @samp{ding@@gnus.org} mailing list, where people
+propose changes and new features, post patches and new backends. This
+phase is called the @dfn{alpha} phase, since the Gnusae released in this
+phase are @dfn{alpha releases}, or (perhaps more commonly in other
+circles) @dfn{snapshots}. During this phase, Gnus is assumed to be
+unstable and should not be used by casual users. Gnus alpha releases
+have names like ``Red Gnus'' and ``Quassia Gnus''.
+
+After futzing around for 50-100 alpha releases, Gnus is declared
+@dfn{frozen}, and only bug fixes are applied. Gnus loses the prefix,
+and is called things like ``Gnus 5.6.32'' instead. Normal people are
+supposed to be able to use these, and these are mostly discussed on the
+@samp{gnu.emacs.gnus} newsgroup.
+
+@cindex Incoming*
+@vindex nnmail-delete-incoming
+Some variable defaults differ between alpha Gnusae and released Gnusae.
+In particular, @code{nnmail-delete-incoming} defaults to @code{nil} in
+alpha Gnusae and @code{t} in released Gnusae. This is to prevent
+lossage of mail if an alpha release hiccups while handling the mail.
+
+The division of discussion between the ding mailing list and the Gnus
+newsgroup is not purely based on publicity concerns. It's true that
+having people write about the horrible things that an alpha Gnus release
+can do (sometimes) in a public forum may scare people off, but more
+importantly, talking about new experimental features that have been
+introduced may confuse casual users. New features are frequently
+introduced, fiddled with, and judged to be found wanting, and then
+either discarded or totally rewritten. People reading the mailing list
+usually keep up with these rapid changes, whille people on the newsgroup
+can't be assumed to do so.
+
+
+
@node Contributors
@subsection Contributors
@cindex contributors
Erik Naggum---help, ideas, support, code and stuff.
@item
+Shenghuo Zhu---uudecode.el, mm-uu.el, rfc1843.el and many other things
+connected with @sc{mime} and other types of en/decoding.
+
+@item
Wes Hardaker---@file{gnus-picon.el} and the manual section on
@dfn{picons} (@pxref{Picons}).
Peter Arius,
Matt Armstrong,
Marc Auslander,
+Miles Bader,
+Alexei V. Barantsev,
Frank Bennett,
Robert Bihlmeyer,
Chris Bone,
Mark Borges,
Mark Boyns,
Lance A. Brown,
+Rob Browning,
Kees de Bruin,
Martin Buchholz,
Joe Buehler,
David Charlap,
Dan Christensen,
Kevin Christian,
+Jae-you Chung, @c ?
+James H. Cloos, Jr.,
+Laura Conrad,
Michael R. Cook,
Glenn Coombs,
+Andrew J. Cosgriff,
+Neil Crellin,
Frank D. Cringle,
Geoffrey T. Dairiki,
Andre Deparade,
Michael Welsh Duggan,
Dave Edmondson,
Paul Eggert,
+Mark W. Eichin,
+Karl Eichwalder,
Enami Tsugutomo, @c Enami
Michael Ernst,
Luc Van Eycken,
Sam Falkner,
Nelson Jose dos Santos Ferreira,
Sigbjorn Finne,
+Sven Fischer,
+Paul Fisher,
Decklin Foster,
Gary D. Foster,
Paul Franklin,
Arne Georg Gleditsch,
David S. Goldberg,
Michelangelo Grigni,
+Dale Hagglund,
D. Hall,
Magnus Hammerin,
Kenichi Handa, @c Handa
Yoshiki Hayashi, @c ?
P. E. Jareth Hein,
Hisashige Kenji, @c Hisashige
+Scott Hofmann,
Marc Horowitz,
Gunnar Horrigmo,
Richard Hoskins,
Brad Howes,
+Miguel de Icaza,
François Felix Ingrand,
+Tatsuya Ichikawa, @c ?
Ishikawa Ichiro, @c Ishikawa
Lee Iverson,
Iwamuro Motonori, @c Iwamuro
Rajappa Iyer,
Andreas Jaeger,
+Adam P. Jenkins,
Randell Jesup,
Fred Johansen,
+Gareth Jones,
Simon Josefsson,
Greg Klanderman,
Karl Kleinpaste,
+Michael Klingbeil,
Peter Skov Knudsen,
Shuhei Kobayashi, @c Kobayashi
+Petr Konecny,
+Koseki Yoshinori, @c Koseki
Thor Kristoffersen,
Jens Lautenbacher,
+Martin Larose,
Seokchan Lee, @c Lee
+Joerg Lenneis,
Carsten Leonhardt,
James LewisMoss,
Christian Limpach,
Ken Olstad,
Masaharu Onishi, @c Onishi
Hideki Ono, @c Ono
+Ettore Perazzoli,
William Perry,
Stephen Peters,
Jens-Ulrik Holger Petersen,
Ulrich Pfeifer,
+Matt Pharr,
+Andy Piper,
John McClary Prevost,
+Bill Pringlemeir,
Mike Pullen,
Jim Radford,
Colin Rafferty,
Roland B. Roberts,
Bart Robinson,
Christian von Roques,
+Markus Rost,
Jason Rumney,
Wolfgang Rupprecht,
Jay Sachs,
Dewey M. Sasser,
+Conrad Sauerwald,
Loren Schall,
Dan Schmidt,
Ralph Schleicher,
Richard Stallman,
Greg Stark,
Sam Steingold,
+Paul Stevenson,
+Jonas Steverud,
Paul Stodghill,
+Kiyokazu Suto, @c Suto
Kurt Swanson,
Samuel Tardieu,
Teddy,
Chuck Thompson,
+Tozawa Akihiko, @c Tozawa
Philippe Troin,
James Troup,
+Trung Tran-Duc,
+Jack Twilley,
Aaron M. Ucko,
Aki Vehtari,
Didier Verna,
+Vladimir Volovich,
Jan Vroonhof,
Stefan Waldherr,
Pete Ware,
Barry A. Warsaw,
Christoph Wedler,
Joe Wells,
-Katsumi Yamaoka, @c Yamaoka
+Lee Willis,
+Katsumi Yamaoka @c Yamaoka
and
-Shenghuo Zhu. @c Zhu
+Lloyd Zusman.
+
For a full overview of what each person has done, the ChangeLogs
included in the Gnus alpha distributions should give ample reading
* ding Gnus:: New things in Gnus 5.0/5.1, the first new Gnus.
* September Gnus:: The Thing Formally Known As Gnus 5.3/5.3.
* Red Gnus:: Third time best---Gnus 5.4/5.5.
-* Quassia Gnus:: Two times two is four, or Gnus 5.6.
+* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
@end menu
These lists are, of course, just @emph{short} overviews of the
@item
Article headers can be buttonized (@pxref{Article Washing}).
-@lisp
-(add-hook 'gnus-article-display-hook
- 'gnus-article-add-buttons-to-head)
-@end lisp
-
@item
All mail backends support fetching articles by @code{Message-ID}.
@item
Boring headers can be hidden (@pxref{Article Hiding}).
-@lisp
-(add-hook 'gnus-article-display-hook
- 'gnus-article-hide-boring-headers t)
-@end lisp
-
@item
Default scoring values can now be set from the menu bar.
@item
Emphasized text can be properly fontisized:
-@lisp
-(add-hook 'gnus-article-display-hook
- 'gnus-article-emphasize)
-@end lisp
-
@end itemize
@itemize @bullet
@item
-Native @sc{mime} support is something that should be done.
-
-@item
-Really do unbinhexing.
-
-@item
I would like the zombie-page to contain an URL to the source of the
latest version of gnus or some explanation on where to find it.
@item
warn user about `=' redirection of a group in the active file?
@item
- really unbinhex binhex files.
-@item
take over the XEmacs menubar and offer a toggle between the XEmacs
bar and the Gnus bar.
@item
@item
AUTHINFO GENERIC
@item
- support qmail maildir spools
-@item
`run-with-idle-timer' in gnus-demon.
@item
stop using invisible text properties and start using overlays instead
new group parameter -- `post-to-server' that says to post
using the current server. Also a variable to do the same.
@item
- the slave dribble files should autosave to the slave file names.
+ the slave dribble files should auto-save to the slave file names.
@item
a group parameter that says what articles to display on group entry, based
on article marks.
numbers and match on the age of the article.
@item
- gnus-cacheable-groups
-
-@item
@example
> > > If so, I've got one gripe: It seems that when I fire up gnus 5.2.25
> > > under xemacs-19.14, it's creating a new frame, but is erasing the
add a way to select which NoCeM type to apply -- spam, troll, etc.
@item
- nndraft-request-group should tally autosave files.
+ nndraft-request-group should tally auto-save files.
@item
implement nntp-retry-on-break and nntp-command-timeout.
Implement gnus-batch-brew-soup.
@item
+Group parameters and summary commands for un/subscribing to mailing
+lists.
+
+@item
+Introduce nnmail-home-directory.
+
+@item
+gnus-fetch-group and friends should exit Gnus when the user
+exits the group.
+
+@item
+The jingle is only played on the second invocation of Gnus.
+
+@item
+Bouncing articles should do MIME.
+
+@item
+Crossposted articles should "inherit" the % or @ mark from the other
+groups it has been crossposted to, or something. (Agent.)
+
+@item
+`S D r' should allow expansion of aliases.
+
+@item
+If point is on a group that appears multiple times in topics, and
+you press `l', point will move to the first instance of the group.
+
+@item
+Fetch by Message-ID from dejanews.
+
+<URL:http://search.dejanews.com/msgid.xp?MID=%3C62h9l9$hm4@@basement.replay.com%3E&fmt=raw>
+
+@item
+A spec for the group line format to display the number of
+agent-downloaded articles in the group.
+
+@item
+Some nntp servers never respond when posting, so there should be a
+timeout for all commands.
+
+@item
+When stading on a topic line and `t'-ing, point goes to the last line.
+It should go somewhere else.
+
+@item
+I'm having trouble accessing a newsgroup with a "+" in its name with
+Gnus. There is a new newsgroup on msnews.microsoft.com named
+"microsoft.public.multimedia.directx.html+time" that I'm trying to
+access as
+"nntp+msnews.microsoft.com:microsoft.public.multimedia.directx.html+time"
+but it gives an error that it cant access the group.
+
+Is the "+" character illegal in newsgroup names? Is there any way in
+Gnus to work around this? (gnus 5.6.45 - XEmacs 20.4)
+
+@item
+
+When `#F', do:
+
+@example
+Subject: Answer to your mails 01.01.1999-01.05.1999
+ --text follows this line--
+Sorry I killfiled you...
+
+Under the subject "foo", you wrote on 01.01.1999:
+> bar
+Under the subject "foo1", you wrote on 01.01.1999:
+> bar 1
+@end example
+
+@item
+Allow "orphan" scores in the Agent scoring.
+
+@item
+@example
+ - Edit article's summary line.
+ - End edit
+ - Sort lines in buffer by subject
+
+ --> the old subject line appears in Summary buffer, not the one that was
+ just changed to.
+@end example
+
+@item
Solve the halting problem.
@c TODO
useful data is in the summary buffer, anyway. Set this variable to
@samp{^NEVVVVER} or @samp{From:}, or whatever you feel you need.
-@item gnus-article-display-hook
Set this hook to all the available hiding commands:
@lisp
-(setq gnus-article-display-hook
- '(gnus-article-hide-headers
- gnus-article-hide-signature
- gnus-article-hide-citation))
+(setq gnus-treat-hide-headers 'head
+ gnus-treat-hide-signature t
+ gnus-treat-hide-citation t)
@end lisp
@item gnus-use-full-window
use any other newsreaders than Gnus. This variable is @code{t} by
default.
+@item gnus-read-newsrc-file
+If this is @code{nil}, Gnus will never read @file{.newsrc}---it will
+only read @file{.newsrc.eld}. This means that you will not be able to
+use any other newsreaders than Gnus. This variable is @code{t} by
+default.
+
@item gnus-save-killed-list
If this is @code{nil}, Gnus will not save the list of dead groups. You
should also set @code{gnus-check-new-newsgroups} to @code{ask-server}
@code{gnus-nov-is-evil} to @code{nil} to make entering and exiting the
summary buffer faster.
-Set @code{gnus-article-display-hook} to @code{nil} to make article
-processing a bit faster.
-
@page
@node Troubleshooting
@page
-@node A Programmers Guide to Gnus
-@section A Programmer@'s Guide to Gnus
+@node Gnus Reference Guide
+@section Gnus Reference Guide
It is my hope that other people will figure out smart stuff that Gnus
can do, and that other people will write those smart things as well. To
@lisp
(gnus-check-backend-function "request-scan" "nnml:misc")
-=> t
+@result{} t
@end lisp
@item gnus-read-method
There should be no result data from this function.
+@item (nnchoke-request-set-mark GROUP ACTION &optional SERVER)
+
+Set/remove/add marks on articles. Normally Gnus handles the article
+marks (such as read, ticked, expired etc) internally, and store them in
+@code{~/.newsrc.eld}. Some backends (such as IMAP) however carry all
+information about the articles on the server, so Gnus need to propagate
+the mark information to the server.
+
+ACTION is a list of mark setting requests, having this format:
+
+@example
+(RANGE ACTION MARK)
+@end example
+
+Range is a range of articles you wish to update marks on. Action is
+@code{set}, @code{add} or @code{del}, respectively used for removing all
+existing marks and setting them as specified, adding (preserving the
+marks not mentioned) mark and removing (preserving the marks not
+mentioned) marks. Mark is a list of marks; where each mark is a
+symbol. Currently used marks are @code{read}, @code{tick}, @code{reply},
+@code{expire}, @code{killed}, @code{dormant}, @code{save},
+@code{download} and @code{unsend}, but your backend should, if possible,
+not limit itself to theese.
+
+Given contradictory actions, the last action in the list should be the
+effective one. That is, if your action contains a request to add the
+@code{tick} mark on article 1 and, later in the list, a request to
+remove the mark on the same article, the mark should in fact be removed.
+
+An example action list:
+
+@example
+(((5 12 30) 'del '(tick))
+ ((10 . 90) 'add '(read expire))
+ ((92 94) 'del '(read)))
+@end example
+
+The function should return a range of articles it wasn't able to set the
+mark on (currently not used for anything).
+
+There should be no result data from this function.
+
@item (nnchoke-request-update-mark GROUP ARTICLE MARK)
If the user tries to set a mark that the backend doesn't like, this
These slots are, in order: @code{number}, @code{subject}, @code{from},
@code{date}, @code{id}, @code{references}, @code{chars}, @code{lines},
-@code{xref}. There are macros for accessing and setting these
-slots---they all have predictable names beginning with
+@code{xref}, and @code{extra}. There are macros for accessing and
+setting these slots---they all have predictable names beginning with
@code{mail-header-} and @code{mail-header-set-}, respectively.
-The @code{xref} slot is really a @code{misc} slot. Any extra info will
-be put in there.
+All these slots contain strings, except the @code{extra} slot, which
+contains an alist of header/value pairs (@pxref{To From Newsgroups}).
@node Ranges
second is a more complex one:
@example
-("no.group" 5 (1 . 54324))
+("no.group" 5 ((1 . 54324)))
("nnml:my.mail" 3 ((1 . 5) 9 (20 . 55))
((tick (15 . 19)) (replied 3 6 (19 . 3)))
@end iftex
@c End:
-
projects / elisp / gnus.git- / blobdiff