-@c \input texinfo @c -*-texinfo-*-
+\input texinfo
@setfilename gnus
-@settitle Pterodactyl Gnus 0.91 Manual
+@settitle Gnus Manual
@synindex fn cp
@synindex vr cp
@synindex pg cp
-@c @direntry
-@c * Gnus: (gnus). The newsreader Gnus.
-@c @end direntry
+@dircategory Emacs
+@direntry
+* Gnus: (gnus). The newsreader Gnus.
+@end direntry
@iftex
@finalout
@end iftex
\usepackage[latin1]{inputenc}
\usepackage{pagestyle}
\usepackage{epsfig}
-\usepackage{bembo}
\usepackage{pixidx}
+\input{gnusconfig.tex}
+
+\ifx\pdfoutput\undefined
+\else
+\usepackage[pdftex,bookmarks,colorlinks=true]{hyperref}
+\usepackage{thumbpdf}
+\pdfcompresslevel=9
+\fi
\makeindex
\begin{document}
+\newcommand{\gnusversionname}{Oort Gnus v0.13}
\newcommand{\gnuschaptername}{}
\newcommand{\gnussectionname}{}
\newcommand{\gnusbackslash}{/}
+\newcommand{\gnusref}[1]{``#1'' on page \pageref{#1}}
+\ifx\pdfoutput\undefined
+\newcommand{\gnusuref}[1]{\gnustt{#1}}
+\else
+\newcommand{\gnusuref}[1]{\href{#1}{\gnustt{#1}}}
+\fi
\newcommand{\gnusxref}[1]{See ``#1'' on page \pageref{#1}}
\newcommand{\gnuspxref}[1]{see ``#1'' on page \pageref{#1}}
\newcommand{\gnuskindex}[1]{\index{#1}}
\newcommand{\gnusindex}[1]{\index{#1}}
-\newcommand{\gnustt}[1]{{\fontfamily{pfu}\fontsize{10pt}{10}\selectfont #1}}
+\newcommand{\gnustt}[1]{{\gnusselectttfont{}#1}}
\newcommand{\gnuscode}[1]{\gnustt{#1}}
-\newcommand{\gnussamp}[1]{``{\fontencoding{OT1}\fontfamily{pfu}\fontsize{10pt}{10}\selectfont #1}''}
+\newcommand{\gnussamp}[1]{``{\fontencoding{OT1}\gnusselectttfont{}#1}''}
\newcommand{\gnuslisp}[1]{\gnustt{#1}}
\newcommand{\gnuskbd}[1]{`\gnustt{#1}'}
+\newcommand{\gnuskey}[1]{`\gnustt{#1}'}
\newcommand{\gnusfile}[1]{`\gnustt{#1}'}
\newcommand{\gnusdfn}[1]{\textit{#1}}
\newcommand{\gnusi}[1]{\textit{#1}}
\newcommand{\gnusvar}[1]{{\fontsize{10pt}{10}\selectfont\textsl{\textsf{#1}}}}
\newcommand{\gnussc}[1]{\textsc{#1}}
\newcommand{\gnustitle}[1]{{\huge\textbf{#1}}}
+\newcommand{\gnusversion}[1]{{\small\textit{#1}}}
\newcommand{\gnusauthor}[1]{{\large\textbf{#1}}}
\newcommand{\gnusresult}[1]{\gnustt{=> #1}}
\newcommand{\gnusbraceleft}{{$>$}}
\newcommand{\gnusbraceright}{{$>$}}
-\newcommand{\gnushead}{\raisebox{-1cm}{\epsfig{figure=ps/gnus-head.eps,height=1cm}}}
+\newcommand{\gnushead}{\raisebox{-1cm}{\epsfig{figure=ps/gnus-head,height=1cm}}}
\newcommand{\gnusinteresting}{
\marginpar[\mbox{}\hfill\gnushead]{\gnushead}
}
}
\newcommand{\gnusicon}[1]{
-\marginpar[\mbox{}\hfill\raisebox{-1.5cm}{\epsfig{figure=tmp/#1-up.ps,height=1.5cm}}]{\raisebox{-1cm}{\epsfig{figure=tmp/#1-up.ps,height=1cm}}}
+\marginpar[\mbox{}\hfill\raisebox{-1.5cm}{\epsfig{figure=ps/#1-up,height=1.5cm}}]{\raisebox{-1cm}{\epsfig{figure=ps/#1-up,height=1cm}}}
}
\newcommand{\gnuspicon}[1]{
{
\ifodd\count0
\mbox{} \hfill
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\else
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\hfill \mbox{}
\fi
}
{
\ifodd\count0
\mbox{} \hfill
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\else
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\hfill \mbox{}
\fi
}
{
\ifodd\count0
\mbox{} \hfill
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\else
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\hfill \mbox{}
\fi
}
\parindent=0cm
\addtolength{\textheight}{2cm}
-\gnustitle{\gnustitlename}\\
+\gnustitle{\gnustitlename}\hfill\gnusversion{\gnusversionname}\\
\rule{15cm}{1mm}\\
\vfill
-\hspace*{0cm}\epsfig{figure=ps/gnus-big-logo.eps,height=15cm}
+\hspace*{0cm}\epsfig{figure=ps/gnus-big-logo,height=15cm}
\vfill
\rule{15cm}{1mm}\\
\gnusauthor{by Lars Magne Ingebrigtsen}
\thispagestyle{empty}
-Copyright \copyright{} 1995,96,97,98,99 Free Software Foundation, Inc.
+Copyright \copyright{} 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003
+Free Software Foundation, Inc.
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
\newpage
\end{titlepage}
@end iflatex
@end iftex
-@ifinfo
+@ifnottex
This file documents Gnus, the GNU Emacs newsreader.
-Copyright (C) 1995,96,97,98,99 Free Software Foundation, Inc.
+Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+ Free Software Foundation, Inc.
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being none, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ifinfo
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
+@end ifnottex
@tex
@titlepage
-@title Pterodactyl Gnus 0.91 Manual
+@title Gnus Manual
@author by Lars Magne Ingebrigtsen
@page
@vskip 0pt plus 1filll
-Copyright @copyright{} 1995,96,97,98,99 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
+Copyright @copyright{} 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003
+ Free Software Foundation, Inc.
+
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
+
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
@end titlepage
@page
spool or your mbox file. All at the same time, if you want to push your
luck.
-This manual corresponds to Pterodactyl Gnus 0.91.
+This manual corresponds to Oort Gnus v0.13.
@end ifinfo
Gnus is a message-reading laboratory. It will let you look at just
about anything as if it were a newsgroup. You can read mail with it,
-you can browse directories with it, you can @code{ftp} with it---you can
-even read news with it!
+you can browse directories with it, you can @code{ftp} with it---you
+can even read news with it!
Gnus tries to empower people who read news the same way Emacs empowers
people who edit text. Gnus sets no limits to what the user should be
@end iftex
-
@menu
-* Starting Up:: Finding news can be a pain.
-* The Group Buffer:: Selecting, subscribing and killing groups.
-* The Summary Buffer:: Reading, saving and posting articles.
-* The Article Buffer:: Displaying and handling articles.
-* Composing Messages:: Information on sending mail and news.
-* Select Methods:: Gnus reads all messages from various select methods.
-* Scoring:: Assigning values to articles.
-* Various:: General purpose settings.
-* The End:: Farewell and goodbye.
-* Appendices:: Terminology, Emacs intro, FAQ, History, Internals.
-* Index:: Variable, function and concept index.
-* Key Index:: Key Index.
+* Starting Up:: Finding news can be a pain.
+* Group Buffer:: Selecting, subscribing and killing groups.
+* Summary Buffer:: Reading, saving and posting articles.
+* Article Buffer:: Displaying and handling articles.
+* Composing Messages:: Information on sending mail and news.
+* Select Methods:: Gnus reads all messages from various select methods.
+* Scoring:: Assigning values to articles.
+* Various:: General purpose settings.
+* The End:: Farewell and goodbye.
+* Appendices:: Terminology, Emacs intro, FAQ, History, Internals.
+* Index:: Variable, function and concept index.
+* Key Index:: Key Index.
+
+Other related manuals
+
+* Message:(message). Composing messages.
+* Emacs-MIME:(emacs-mime). Composing messages; MIME-specific parts.
+* Sieve:(sieve). Managing Sieve scripts in Emacs.
+* PGG:(pgg). PGP/MIME with Gnus.
+
+@detailmenu
+ --- The Detailed Node Listing ---
+
+Starting Gnus
+
+* Finding the News:: Choosing a method for getting news.
+* The First Time:: What does Gnus do the first time you start it?
+* The Server is Down:: How can I read my mail then?
+* Slave Gnusae:: You can have more than one Gnus active at a time.
+* Fetching a Group:: Starting Gnus just to read a group.
+* New Groups:: What is Gnus supposed to do with new groups?
+* Changing Servers:: You may want to move from one server to another.
+* Startup Files:: Those pesky startup files---@file{.newsrc}.
+* Auto Save:: Recovering from a crash.
+* The Active File:: Reading the active file over a slow line Takes Time.
+* Startup Variables:: Other variables you might change.
+
+New Groups
+
+* Checking New Groups:: Determining what groups are new.
+* Subscription Methods:: What Gnus should do with new groups.
+* Filtering New Groups:: Making Gnus ignore certain new groups.
+
+Group Buffer
+
+* Group Buffer Format:: Information listed and how you can change it.
+* Group Maneuvering:: Commands for moving in the group buffer.
+* Selecting a Group:: Actually reading news.
+* Subscription Commands:: Unsubscribing, killing, subscribing.
+* Group Data:: Changing the info for a group.
+* Group Levels:: Levels? What are those, then?
+* Group Score:: A mechanism for finding out what groups you like.
+* Marking Groups:: You can mark groups for later processing.
+* Foreign Groups:: Creating and editing groups.
+* Group Parameters:: Each group may have different parameters set.
+* Listing Groups:: Gnus can list various subsets of the groups.
+* Sorting Groups:: Re-arrange the group order.
+* Group Maintenance:: Maintaining a tidy @file{.newsrc} file.
+* Browse Foreign Server:: You can browse a server. See what it has to offer.
+* Exiting Gnus:: Stop reading news and get some work done.
+* Group Topics:: A folding group mode divided into topics.
+* Misc Group Stuff:: Other stuff that you can to do.
+
+Group Buffer Format
+
+* Group Line Specification:: Deciding how the group buffer is to look.
+* Group Modeline Specification:: The group buffer modeline.
+* Group Highlighting:: Having nice colors in the group buffer.
+
+Group Topics
+
+* Topic Commands:: Interactive E-Z commands.
+* Topic Variables:: How to customize the topics the Lisp Way.
+* Topic Sorting:: Sorting each topic individually.
+* Topic Topology:: A map of the world.
+* Topic Parameters:: Parameters that apply to all groups in a topic.
+
+Misc Group Stuff
+
+* Scanning New Messages:: Asking Gnus to see whether new messages have arrived.
+* Group Information:: Information and help on groups and Gnus.
+* Group Timestamp:: Making Gnus keep track of when you last read a group.
+* File Commands:: Reading and writing the Gnus files.
+* Sieve Commands:: Managing Sieve scripts.
+
+Summary Buffer
+
+* Summary Buffer Format:: Deciding how the summary buffer is to look.
+* Summary Maneuvering:: Moving around the summary buffer.
+* Choosing Articles:: Reading articles.
+* Paging the Article:: Scrolling the current article.
+* Reply Followup and Post:: Posting articles.
+* Delayed Articles:: Send articles at a later time.
+* Marking Articles:: Marking articles as read, expirable, etc.
+* Limiting:: You can limit the summary buffer.
+* Threading:: How threads are made.
+* Sorting the Summary Buffer:: How articles and threads are sorted.
+* Asynchronous Fetching:: Gnus might be able to pre-fetch articles.
+* Article Caching:: You may store articles in a cache.
+* Persistent Articles:: Making articles expiry-resistant.
+* Article Backlog:: Having already read articles hang around.
+* Saving Articles:: Ways of customizing article saving.
+* Decoding Articles:: Gnus can treat series of (uu)encoded articles.
+* Article Treatment:: The article buffer can be mangled at will.
+* MIME Commands:: Doing MIMEy things with the articles.
+* Charsets:: Character set issues.
+* Article Commands:: Doing various things with the article buffer.
+* Summary Sorting:: Sorting the summary buffer in various ways.
+* Finding the Parent:: No child support? Get the parent.
+* Alternative Approaches:: Reading using non-default summaries.
+* Tree Display:: A more visual display of threads.
+* Mail Group Commands:: Some commands can only be used in mail groups.
+* Various Summary Stuff:: What didn't fit anywhere else.
+* Exiting the Summary Buffer:: Returning to the Group buffer,
+ or reselecting the current group.
+* Crosspost Handling:: How crossposted articles are dealt with.
+* Duplicate Suppression:: An alternative when crosspost handling fails.
+* Security:: Decrypt and Verify.
+* Mailing List:: Mailing list minor mode.
+
+Summary Buffer Format
+
+* Summary Buffer Lines:: You can specify how summary lines should look.
+* To From Newsgroups:: How to not display your own name.
+* Summary Buffer Mode Line:: You can say how the mode line should look.
+* Summary Highlighting:: Making the summary buffer all pretty and nice.
+
+Choosing Articles
+
+* Choosing Commands:: Commands for choosing articles.
+* Choosing Variables:: Variables that influence these commands.
+
+Reply, Followup and Post
+
+* Summary Mail Commands:: Sending mail.
+* Summary Post Commands:: Sending news.
+* Summary Message Commands:: Other Message-related commands.
+* Canceling and Superseding::
+
+Marking Articles
+
+* Unread Articles:: Marks for unread articles.
+* Read Articles:: Marks for read articles.
+* Other Marks:: Marks that do not affect readedness.
+* Setting Marks::
+* Generic Marking Commands::
+* Setting Process Marks::
+
+Marking Articles
+
+* Setting Marks:: How to set and remove marks.
+* Generic Marking Commands:: How to customize the marking.
+* Setting Process Marks:: How to mark articles for later processing.
+
+Threading
+
+* Customizing Threading:: Variables you can change to affect the threading.
+* Thread Commands:: Thread based commands in the summary buffer.
+
+Customizing Threading
+
+* Loose Threads:: How Gnus gathers loose threads into bigger threads.
+* Filling In Threads:: Making the threads displayed look fuller.
+* More Threading:: Even more variables for fiddling with threads.
+* Low-Level Threading:: You thought it was over... but you were wrong!
+
+Decoding Articles
+
+* Uuencoded Articles:: Uudecode articles.
+* Shell Archives:: Unshar articles.
+* PostScript Files:: Split PostScript.
+* Other Files:: Plain save and binhex.
+* Decoding Variables:: Variables for a happy decoding.
+* Viewing Files:: You want to look at the result of the decoding?
+
+Decoding Variables
+
+* Rule Variables:: Variables that say how a file is to be viewed.
+* Other Decode Variables:: Other decode variables.
+* Uuencoding and Posting:: Variables for customizing uuencoding.
+
+Article Treatment
+
+* Article Highlighting:: You want to make the article look like fruit salad.
+* Article Fontisizing:: Making emphasized text look nice.
+* Article Hiding:: You also want to make certain info go away.
+* Article Washing:: Lots of way-neat functions to make life better.
+* Article Header:: Doing various header transformations.
+* Article Buttons:: Click on URLs, Message-IDs, addresses and the like.
+* Article Date:: Grumble, UT!
+* Article Display:: Display various stuff---X-Face, Picons, Smileys
+* Article Signature:: What is a signature?
+* Article Miscellania:: Various other stuff.
+
+Alternative Approaches
+
+* Pick and Read:: First mark articles and then read them.
+* Binary Groups:: Auto-decode all articles.
+
+Various Summary Stuff
+
+* Summary Group Information:: Information oriented commands.
+* Searching for Articles:: Multiple article commands.
+* Summary Generation Commands::
+* Really Various Summary Commands:: Those pesky non-conformant commands.
+
+Article Buffer
+
+* Hiding Headers:: Deciding what headers should be displayed.
+* Using MIME:: Pushing articles through @sc{mime} before reading them.
+* Customizing Articles:: Tailoring the look of the articles.
+* Article Keymap:: Keystrokes available in the article buffer.
+* Misc Article:: Other stuff.
+
+Composing Messages
+
+* Mail:: Mailing and replying.
+* Posting Server:: What server should you post and mail via?
+* Mail and Post:: Mailing and posting at the same time.
+* Archived Messages:: Where Gnus stores the messages you've sent.
+* Posting Styles:: An easier way to specify who you are.
+* Drafts:: Postponing messages and rejected messages.
+* Rejected Articles:: What happens if the server doesn't like your article?
+* Signing and encrypting:: How to compose secure messages.
+
+Select Methods
+
+* Server Buffer:: Making and editing virtual servers.
+* Getting News:: Reading USENET news with Gnus.
+* Getting Mail:: Reading your personal mail with Gnus.
+* Browsing the Web:: Getting messages from a plethora of Web sources.
+* IMAP:: Using Gnus as a @sc{imap} client.
+* Other Sources:: Reading directories, files, SOUP packets.
+* Combined Groups:: Combining groups into one group.
+* Gnus Unplugged:: Reading news and mail offline.
+
+Server Buffer
+
+* Server Buffer Format:: You can customize the look of this buffer.
+* Server Commands:: Commands to manipulate servers.
+* Example Methods:: Examples server specifications.
+* Creating a Virtual Server:: An example session.
+* Server Variables:: Which variables to set.
+* Servers and Methods:: You can use server names as select methods.
+* Unavailable Servers:: Some servers you try to contact may be down.
+
+Getting News
+
+* NNTP:: Reading news from an @sc{nntp} server.
+* News Spool:: Reading news from the local spool.
+
+@sc{nntp}
+
+* Direct Functions:: Connecting directly to the server.
+* Indirect Functions:: Connecting indirectly to the server.
+* Common Variables:: Understood by several connection functions.
+
+Getting Mail
+
+* Mail in a Newsreader:: Important introductory notes.
+* Getting Started Reading Mail:: A simple cookbook example.
+* Splitting Mail:: How to create mail groups.
+* Mail Sources:: How to tell Gnus where to get mail from.
+* Mail Back End Variables:: Variables for customizing mail handling.
+* Fancy Mail Splitting:: Gnus can do hairy splitting of incoming mail.
+* Group Mail Splitting:: Use group customize to drive mail splitting.
+* Incorporating Old Mail:: What about the old mail you have?
+* Expiring Mail:: Getting rid of unwanted mail.
+* Washing Mail:: Removing gruft from the mail you get.
+* Duplicates:: Dealing with duplicated mail.
+* Not Reading Mail:: Using mail back ends for reading other files.
+* Choosing a Mail Back End:: Gnus can read a variety of mail formats.
+
+Mail Sources
+
+* Mail Source Specifiers:: How to specify what a mail source is.
+* Mail Source Customization:: Some variables that influence things.
+* Fetching Mail:: Using the mail source specifiers.
+
+Choosing a Mail Back End
+
+* Unix Mail Box:: Using the (quite) standard Un*x mbox.
+* Rmail Babyl:: Emacs programs use the rmail babyl format.
+* Mail Spool:: Store your mail in a private spool?
+* MH Spool:: An mhspool-like back end.
+* Mail Folders:: Having one file for each group.
+* Comparing Mail Back Ends:: An in-depth looks at pros and cons.
+
+Browsing the Web
+
+* Archiving Mail::
+* Web Searches:: Creating groups from articles that match a string.
+* Slashdot:: Reading the Slashdot comments.
+* Ultimate:: The Ultimate Bulletin Board systems.
+* Web Archive:: Reading mailing list archived on web.
+* RSS:: Reading RDF site summary.
+* Customizing w3:: Doing stuff to Emacs/w3 from Gnus.
+
+@sc{imap}
+
+* Splitting in IMAP:: Splitting mail with nnimap.
+* Expiring in IMAP:: Expiring mail with nnimap.
+* Editing IMAP ACLs:: Limiting/enabling other users access to a mailbox.
+* Expunging mailboxes:: Equivalent of a "compress mailbox" button.
+* A note on namespaces:: How to (not) use IMAP namespace in Gnus.
+
+Other Sources
+
+* Directory Groups:: You can read a directory as if it was a newsgroup.
+* Anything Groups:: Dired? Who needs dired?
+* Document Groups:: Single files can be the basis of a group.
+* SOUP:: Reading @sc{soup} packets ``offline''.
+* Mail-To-News Gateways:: Posting articles via mail-to-news gateways.
+
+Document Groups
+
+* Document Server Internals:: How to add your own document types.
+
+SOUP
+
+* SOUP Commands:: Commands for creating and sending @sc{soup} packets
+* SOUP Groups:: A back end for reading @sc{soup} packets.
+* SOUP Replies:: How to enable @code{nnsoup} to take over mail and news.
+
+Combined Groups
+
+* Virtual Groups:: Combining articles from many groups.
+* Kibozed Groups:: Looking through parts of the newsfeed for articles.
+
+Gnus Unplugged
+
+* Agent Basics:: How it all is supposed to work.
+* Agent Categories:: How to tell the Gnus Agent what to download.
+* Agent Commands:: New commands for all the buffers.
+* Agent as Cache:: The Agent is a big cache too.
+* Agent Expiry:: How to make old articles go away.
+* Agent and IMAP:: How to use the Agent with IMAP.
+* Outgoing Messages:: What happens when you post/mail something?
+* Agent Variables:: Customizing is fun.
+* Example Setup:: An example @file{.gnus.el} file for offline people.
+* Batching Agents:: How to fetch news from a @code{cron} job.
+* Agent Caveats:: What you think it'll do and what it does.
+
+Agent Categories
+
+* Category Syntax:: What a category looks like.
+* Category Buffer:: A buffer for maintaining categories.
+* Category Variables:: Customize'r'Us.
+
+Agent Commands
+
+* Group Agent Commands::
+* Summary Agent Commands::
+* Server Agent Commands::
+
+Scoring
+
+* Summary Score Commands:: Adding score entries for the current group.
+* Group Score Commands:: General score commands.
+* Score Variables:: Customize your scoring. (My, what terminology).
+* Score File Format:: What a score file may contain.
+* Score File Editing:: You can edit score files by hand as well.
+* Adaptive Scoring:: Big Sister Gnus knows what you read.
+* Home Score File:: How to say where new score entries are to go.
+* Followups To Yourself:: Having Gnus notice when people answer you.
+* Scoring On Other Headers:: Scoring on non-standard headers.
+* Scoring Tips:: How to score effectively.
+* Reverse Scoring:: That problem child of old is not problem.
+* Global Score Files:: Earth-spanning, ear-splitting score files.
+* Kill Files:: They are still here, but they can be ignored.
+* Converting Kill Files:: Translating kill files to score files.
+* GroupLens:: Getting predictions on what you like to read.
+* Advanced Scoring:: Using logical expressions to build score rules.
+* Score Decays:: It can be useful to let scores wither away.
+
+GroupLens
+
+* Using GroupLens:: How to make Gnus use GroupLens.
+* Rating Articles:: Letting GroupLens know how you rate articles.
+* Displaying Predictions:: Displaying predictions given by GroupLens.
+* GroupLens Variables:: Customizing GroupLens.
+
+Advanced Scoring
+
+* Advanced Scoring Syntax:: A definition.
+* Advanced Scoring Examples:: What they look like.
+* Advanced Scoring Tips:: Getting the most out of it.
+
+Various
+
+* Process/Prefix:: A convention used by many treatment commands.
+* Interactive:: Making Gnus ask you many questions.
+* Symbolic Prefixes:: How to supply some Gnus functions with options.
+* Formatting Variables:: You can specify what buffers should look like.
+* Window Layout:: Configuring the Gnus buffer windows.
+* Faces and Fonts:: How to change how faces look.
+* Compilation:: How to speed Gnus up.
+* Mode Lines:: Displaying information in the mode lines.
+* Highlighting and Menus:: Making buffers look all nice and cozy.
+* Buttons:: Get tendinitis in ten easy steps!
+* Daemons:: Gnus can do things behind your back.
+* NoCeM:: How to avoid spam and other fatty foods.
+* Undo:: Some actions can be undone.
+* Predicate Specifiers:: Specifying predicates.
+* Moderation:: What to do if you're a moderator.
+* Image Enhancements:: Modern versions of Emacs/XEmacs can display images.
+* Fuzzy Matching:: What's the big fuzz?
+* Thwarting Email Spam:: A how-to on avoiding unsolicited commercial email.
+* Various Various:: Things that are really various.
+
+Formatting Variables
+
+* Formatting Basics:: A formatting variable is basically a format string.
+* Mode Line Formatting:: Some rules about mode line formatting variables.
+* Advanced Formatting:: Modifying output in various ways.
+* User-Defined Specs:: Having Gnus call your own functions.
+* Formatting Fonts:: Making the formatting look colorful and nice.
+* Positioning Point:: Moving point to a position after an operation.
+* Tabulation:: Tabulating your output.
+* Wide Characters:: Dealing with wide characters.
+
+Image Enhancements
+
+* Picons:: How to display pictures of what you're reading.
+* Smileys:: Show all those happy faces the way they were meant to be shown.
+* X-Face:: Display a funky, teensy black-and-white image.
+* Toolbar:: Click'n'drool.
+* XVarious:: Other XEmacsy Gnusey variables.
+
+Picons
+
+* Picon Basics:: What are picons and How do I get them.
+* Picon Requirements:: Don't go further if you aren't using XEmacs.
+* Easy Picons:: Displaying Picons---the easy way.
+* Hard Picons:: The way you should do it. You'll learn something.
+* Picon Useless Configuration:: Other variables you can trash/tweak/munge/play with.
+
+Thwarting Email Spam
+
+* The problem of spam:: Some background, and some solutions
+* Anti-Spam Basics:: Simple steps to reduce the amount of spam.
+* SpamAssassin:: How to use external anti-spam tools.
+* Hashcash:: Reduce spam by burning CPU time.
+* Filtering Spam Using The Spam ELisp Package::
+* Filtering Spam Using Statistics with spam-stat::
+
+Appendices
+
+* XEmacs:: Requirements for installing under XEmacs.
+* History:: How Gnus got where it is today.
+* On Writing Manuals:: Why this is not a beginner's guide.
+* Terminology:: We use really difficult, like, words here.
+* Customization:: Tailoring Gnus to your needs.
+* Troubleshooting:: What you might try if things do not work.
+* Gnus Reference Guide:: Rilly, rilly technical stuff.
+* Emacs for Heathens:: A short introduction to Emacsian terms.
+* Frequently Asked Questions::
+
+History
+
+* Gnus Versions:: What Gnus versions have been released.
+* Other Gnus Versions:: Other Gnus versions that also have been released.
+* Why?:: What's the point of Gnus?
+* Compatibility:: Just how compatible is Gnus with @sc{gnus}?
+* Conformity:: Gnus tries to conform to all standards.
+* Emacsen:: Gnus can be run on a few modern Emacsen.
+* Gnus Development:: How Gnus is developed.
+* Contributors:: Oodles of people.
+* New Features:: Pointers to some of the new stuff in Gnus.
+
+New Features
+
+* ding Gnus:: New things in Gnus 5.0/5.1, the first new Gnus.
+* September Gnus:: The Thing Formally Known As Gnus 5.2/5.3.
+* Red Gnus:: Third time best---Gnus 5.4/5.5.
+* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
+* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
+
+Customization
+
+* Slow/Expensive Connection:: You run a local Emacs and get the news elsewhere.
+* Slow Terminal Connection:: You run a remote Emacs.
+* Little Disk Space:: You feel that having large setup files is icky.
+* Slow Machine:: You feel like buying a faster machine.
+
+Gnus Reference Guide
+
+* Gnus Utility Functions:: Common functions and variable to use.
+* Back End Interface:: How Gnus communicates with the servers.
+* Score File Syntax:: A BNF definition of the score file standard.
+* Headers:: How Gnus stores headers internally.
+* Ranges:: A handy format for storing mucho numbers.
+* Group Info:: The group info format.
+* Extended Interactive:: Symbolic prefixes and stuff.
+* Emacs/XEmacs Code:: Gnus can be run under all modern Emacsen.
+* Various File Formats:: Formats of files that Gnus use.
+
+Back End Interface
+
+* Required Back End Functions:: Functions that must be implemented.
+* Optional Back End Functions:: Functions that need not be implemented.
+* Error Messaging:: How to get messages and report errors.
+* Writing New Back Ends:: Extending old back ends.
+* Hooking New Back Ends Into Gnus:: What has to be done on the Gnus end.
+* Mail-like Back Ends:: Some tips on mail back ends.
+
+Various File Formats
+
+* Active File Format:: Information on articles and groups available.
+* Newsgroups File Format:: Group descriptions.
+
+Emacs for Heathens
+
+* Keystrokes:: Entering text and executing commands.
+* Emacs Lisp:: The built-in Emacs programming language.
+
+@end detailmenu
@end menu
@node Starting Up
terminology section (@pxref{Terminology}).
@menu
-* Finding the News:: Choosing a method for getting news.
-* The First Time:: What does Gnus do the first time you start it?
-* The Server is Down:: How can I read my mail then?
-* Slave Gnusae:: You can have more than one Gnus active at a time.
-* Fetching a Group:: Starting Gnus just to read a group.
-* New Groups:: What is Gnus supposed to do with new groups?
-* Startup Files:: Those pesky startup files---@file{.newsrc}.
-* Auto Save:: Recovering from a crash.
-* The Active File:: Reading the active file over a slow line Takes Time.
-* Changing Servers:: You may want to move from one server to another.
-* Startup Variables:: Other variables you might change.
+* Finding the News:: Choosing a method for getting news.
+* The First Time:: What does Gnus do the first time you start it?
+* The Server is Down:: How can I read my mail then?
+* Slave Gnusae:: You can have more than one Gnus active at a time.
+* Fetching a Group:: Starting Gnus just to read a group.
+* New Groups:: What is Gnus supposed to do with new groups?
+* Changing Servers:: You may want to move from one server to another.
+* Startup Files:: Those pesky startup files---@file{.newsrc}.
+* Auto Save:: Recovering from a crash.
+* The Active File:: Reading the active file over a slow line Takes Time.
+* Startup Variables:: Other variables you might change.
@end menu
@end lisp
If you can use a local spool, you probably should, as it will almost
-certainly be much faster.
+certainly be much faster. But do not use the local spool if your
+server is running Leafnode; in this case, use @code{(nntp "localhost")}.
@vindex gnus-nntpserver-file
@cindex NNTPSERVER
appear on these servers will be subscribed (or not) just as native
groups are.
-For instance, if you use the @code{nnmbox} backend to read your mail, you
-would typically set this variable to
+For instance, if you use the @code{nnmbox} back end to read your mail,
+you would typically set this variable to
@lisp
(setq gnus-secondary-select-methods '((nnmbox "")))
if you're in a hurry as well. This command will not attempt to contact
your primary server---instead, it will just activate all groups on level
1 and 2. (You should preferably keep no native groups on those two
-levels.)
+levels.) Also @pxref{Group Levels}.
@node Slave Gnusae
me. Usage of the patent (@dfn{Master/Slave Relationships In Computer
Applications}) will be much more expensive, of course.)
-Anyways, you start one Gnus up the normal way with @kbd{M-x gnus} (or
+Anyway, you start one Gnus up the normal way with @kbd{M-x gnus} (or
however you do it). Each subsequent slave Gnusae should be started with
@kbd{M-x gnus-slave}. These slaves won't save normal @file{.newsrc}
files, but instead save @dfn{slave files} that contain information only
Information from the slave files has, of course, precedence over the
information in the normal (i.e., master) @code{.newsrc} file.
+If the @code{.newsrc*} files have not been saved in the master when the
+slave starts, you may be prompted as to whether to read an auto-save
+file. If you answer "yes", the unsaved changes to the master will be
+incorporated into the slave. If you answer "no", the slave may see some
+messages as unread that have been read in the master.
@node Fetching a Group
@section Fetching a Group
@code{nil}, you can always subscribe to the new groups just by pressing
@kbd{U} in the group buffer (@pxref{Group Maintenance}). This variable
is @code{ask-server} by default. If you set this variable to
-@code{always}, then Gnus will query the backends for new groups even
+@code{always}, then Gnus will query the back ends for new groups even
when you do the @kbd{g} command (@pxref{Scanning New Messages}).
@menu
-* Checking New Groups:: Determining what groups are new.
-* Subscription Methods:: What Gnus should do with new groups.
-* Filtering New Groups:: Making Gnus ignore certain new groups.
+* Checking New Groups:: Determining what groups are new.
+* Subscription Methods:: What Gnus should do with new groups.
+* Filtering New Groups:: Making Gnus ignore certain new groups.
@end menu
@vindex gnus-subscribe-killed
Kill all new groups.
+@item gnus-subscribe-topics
+@vindex gnus-subscribe-topics
+Put the groups into the topic that has a matching @code{subscribe} topic
+parameter (@pxref{Topic Parameters}). For instance, a @code{subscribe}
+topic parameter that looks like
+
+@example
+"nnslashdot"
+@end example
+
+will mean that all groups that match that regex will be subscribed under
+that topic.
+
+If no topics match the groups, the groups will be subscribed in the
+top-level topic.
+
@end table
@vindex gnus-subscribe-hierarchical-interactive
thought it would be nice to have two of these. This variable is more
meant for setting some ground rules, while the other variable is used
more for user fiddling. By default this variable makes all new groups
-that come from mail backends (@code{nnml}, @code{nnbabyl},
-@code{nnfolder}, @code{nnmbox}, and @code{nnmh}) subscribed. If you
-don't like that, just set this variable to @code{nil}.
+that come from mail back ends (@code{nnml}, @code{nnbabyl},
+@code{nnfolder}, @code{nnmbox}, @code{nnmh}, and @code{nnmaildir})
+subscribed. If you don't like that, just set this variable to
+@code{nil}.
New groups that match this regexp are subscribed using
@code{gnus-subscribe-options-newsgroup-method}.
gnus-group-clear-data-on-native-groups} command to clear out all data
that you have on your native groups. Use with caution.
+@kindex M-x gnus-group-clear-data
+@findex gnus-group-clear-data
+Clear the data from the current group only---nix out marks and the
+list of read articles (@code{gnus-group-clear-data}).
+
After changing servers, you @strong{must} move the cache hierarchy away,
since the cached articles will have wrong article numbers, which will
affect which articles Gnus thinks are read.
+@code{gnus-group-clear-data-on-native-groups} will ask you if you want
+to have it done automatically; for @code{gnus-group-clear-data}, you
+can use @kbd{M-x gnus-cache-move-cache} (but beware, it will move the
+cache for all groups).
@node Startup Files
@end lisp
@vindex gnus-init-file
+@vindex gnus-site-init-file
When Gnus starts, it will read the @code{gnus-site-init-file}
(@file{.../site-lisp/gnus} by default) and @code{gnus-init-file}
(@file{~/.gnus} by default) files. These are normal Emacs Lisp files
at all. In any case, @code{some} should be faster than @code{nil}, and
is certainly faster than @code{t} over slow lines.
-Some news servers (Leafnode and old versions of INN, for instance) do
-not support the @code{LIST ACTIVE group}. For these servers, @code{nil}
-is probably the most effficient value for this variable.
+Some news servers (old versions of Leafnode and old versions of INN, for
+instance) do not support the @code{LIST ACTIVE group}. For these
+servers, @code{nil} is probably the most efficient value for this
+variable.
If this variable is @code{nil}, Gnus will ask for group info in total
lock-step, which isn't very fast. If it is @code{some} and you use an
@code{LIST ACTIVE group} command, this isn't very nice to the server.
If you think that starting up Gnus takes too long, try all the three
-different values for this variable and see what works best for you.
+different values for this variable and see what works best for you.
In any case, if you use @code{some} or @code{nil}, you should definitely
kill all groups that you aren't interested in to speed things up.
If non-@code{nil}, the startup message won't be displayed. That way,
your boss might not notice as easily that you are reading news instead
of doing your job. Note that this variable is used before
-@file{.gnus.el} is loaded, so it should be set in @code{.emacs} instead.
+@file{.gnus.el} is loaded, so it should be set in @file{.emacs} instead.
@item gnus-no-groups-message
@vindex gnus-no-groups-message
@end table
-@node The Group Buffer
-@chapter The Group Buffer
+@node Group Buffer
+@chapter Group Buffer
@cindex group buffer
+@c Alex Schroeder suggests to rearrange this as follows:
+@c
+@c <kensanata> ok, just save it for reference. I'll go to bed in a minute.
+@c 1. Selecting a Group, 2. (new) Finding a Group, 3. Group Levels,
+@c 4. Subscription Commands, 5. Group Maneuvering, 6. Group Data,
+@c 7. Group Score, 8. Group Buffer Format
+@c <kensanata> Group Levels should have more information on levels 5 to 9. I
+@c suggest to split the 4th paragraph ("Gnus considers groups...") as follows:
+@c <kensanata> First, "Gnus considers groups... (default 9)."
+@c <kensanata> New, a table summarizing what levels 1 to 9 mean.
+@c <kensanata> Third, "Gnus treats subscribed ... reasons of efficiency"
+@c <kensanata> Then expand the next paragraph or add some more to it.
+@c This short one sentence explains levels 1 and 2, therefore I understand
+@c that I should keep important news at 3 and boring news at 4.
+@c Say so! Then go on to explain why I should bother with levels 6 to 9.
+@c Maybe keep those that you don't want to read temporarily at 6,
+@c those that you never want to read at 8, those that offend your
+@c human rights at 9...
+
+
The @dfn{group buffer} lists all (or parts) of the available groups. It
is the first buffer shown when Gnus starts, and will never be killed as
long as Gnus is active.
@iftex
@iflatex
\gnusfigure{The Group Buffer}{320}{
-\put(75,50){\epsfig{figure=tmp/group.ps,height=9cm}}
+\put(75,50){\epsfig{figure=ps/group,height=9cm}}
\put(120,37){\makebox(0,0)[t]{Buffer name}}
\put(120,38){\vector(1,2){10}}
\put(40,60){\makebox(0,0)[r]{Mode line}}
@end iftex
@menu
-* Group Buffer Format:: Information listed and how you can change it.
-* Group Maneuvering:: Commands for moving in the group buffer.
-* Selecting a Group:: Actually reading news.
-* Group Data:: Changing the info for a group.
-* Subscription Commands:: Unsubscribing, killing, subscribing.
-* Group Levels:: Levels? What are those, then?
-* Group Score:: A mechanism for finding out what groups you like.
-* Marking Groups:: You can mark groups for later processing.
-* Foreign Groups:: Creating and editing groups.
-* Group Parameters:: Each group may have different parameters set.
-* Listing Groups:: Gnus can list various subsets of the groups.
-* Sorting Groups:: Re-arrange the group order.
-* Group Maintenance:: Maintaining a tidy @file{.newsrc} file.
-* Browse Foreign Server:: You can browse a server. See what it has to offer.
-* Exiting Gnus:: Stop reading news and get some work done.
-* Group Topics:: A folding group mode divided into topics.
-* Misc Group Stuff:: Other stuff that you can to do.
+* Group Buffer Format:: Information listed and how you can change it.
+* Group Maneuvering:: Commands for moving in the group buffer.
+* Selecting a Group:: Actually reading news.
+* Subscription Commands:: Unsubscribing, killing, subscribing.
+* Group Data:: Changing the info for a group.
+* Group Levels:: Levels? What are those, then?
+* Group Score:: A mechanism for finding out what groups you like.
+* Marking Groups:: You can mark groups for later processing.
+* Foreign Groups:: Creating and editing groups.
+* Group Parameters:: Each group may have different parameters set.
+* Listing Groups:: Gnus can list various subsets of the groups.
+* Sorting Groups:: Re-arrange the group order.
+* Group Maintenance:: Maintaining a tidy @file{.newsrc} file.
+* Browse Foreign Server:: You can browse a server. See what it has to offer.
+* Exiting Gnus:: Stop reading news and get some work done.
+* Group Topics:: A folding group mode divided into topics.
+* Misc Group Stuff:: Other stuff that you can to do.
@end menu
@section Group Buffer Format
@menu
-* Group Line Specification:: Deciding how the group buffer is to look.
-* Group Modeline Specification:: The group buffer modeline.
-* Group Highlighting:: Having nice colors in the group buffer.
+* Group Line Specification:: Deciding how the group buffer is to look.
+* Group Modeline Specification:: The group buffer modeline.
+* Group Highlighting:: Having nice colors in the group buffer.
@end menu
a @code{printf} specifications, for those of you who use (feh!) C.
@xref{Formatting Variables}.
-@samp{%M%S%5y: %(%g%)\n} is the value that produced those lines above.
+@samp{%M%S%5y:%B%(%g%)\n} is the value that produced those lines above.
There should always be a colon on the line; the cursor always moves to
-the colon after performing an operation. Nothing else is required---not
-even the group name. All displayed text is just window dressing, and is
-never examined by Gnus. Gnus stores all real information it needs using
-text properties.
+the colon after performing an operation. @xref{Positioning
+Point}. Nothing else is required---not even the group name. All
+displayed text is just window dressing, and is never examined by Gnus.
+Gnus stores all real information it needs using text properties.
(Note that if you make a really strange, wonderful, spreadsheet-like
layout, everybody will believe you are hard at work with the accounting
@item R
Number of read articles.
+@item U
+Number of unseen articles.
+
@item t
Estimated total number of articles. (This is really @var{max-number}
minus @var{min-number} plus 1.)
+Gnus uses this estimation because the @sc{nntp} protocol provides
+efficient access to @var{max-number} and @var{min-number} but getting
+the true unread message count is not possible efficiently. For
+hysterical raisins, even the mail back ends, where the true number of
+unread messages might be available efficiently, use the same limited
+interface. To remove this restriction from Gnus means that the back
+end interface has to be changed, which is not an easy job. If you
+want to work on this, please contact the Gnus mailing list.
+
@item y
Number of unread, unticked, non-dormant articles.
@item G
Group name.
+@item C
+Group comment (@pxref{Group Parameters}) or group name if there is no
+comment element in the group parameters.
+
@item D
Newsgroup description.
@item s
Select method.
+@item B
+If the summary buffer for the group is open or not.
+
@item n
Select from where.
Short (collapsed) group name. The @code{gnus-group-uncollapsed-levels}
variable says how many levels to leave at the end of the group name.
The default is 1---this will mean that group names like
-@samp{gnu.emacs.gnus} will be shortened to @samp{g.emacs.gnus}.
+@samp{gnu.emacs.gnus} will be shortened to @samp{g.e.gnus}.
@item m
@vindex gnus-new-mail-mark
@samp{%} (@code{gnus-new-mail-mark}) if there has arrived new mail to
the group lately.
+@item p
+@samp{#} (@code{gnus-process-mark}) if the group is process marked.
+
@item d
A string that says when you last read the group (@pxref{Group
Timestamp}).
@vindex gnus-group-highlight
Highlighting in the group buffer is controlled by the
@code{gnus-group-highlight} variable. This is an alist with elements
-that look like @var{(form . face)}. If @var{form} evaluates to
+that look like @code{(@var{form} . @var{face})}. If @var{form} evaluates to
something non-@code{nil}, the @var{face} will be used on the line.
Here's an example value for this variable that might look nice if the
background is dark:
@lisp
-(face-spec-set 'my-group-face-1
- '((t (:foreground "Red" :bold t))))
-(face-spec-set 'my-group-face-2
- '((t (:foreground "SeaGreen" :bold t))))
-(face-spec-set 'my-group-face-3
- '((t (:foreground "SpringGreen" :bold t))))
-(face-spec-set 'my-group-face-4
- '((t (:foreground "SteelBlue" :bold t))))
-(face-spec-set 'my-group-face-5
- '((t (:foreground "SkyBlue" :bold t))))
+(cond (window-system
+ (setq custom-background-mode 'light)
+ (defface my-group-face-1
+ '((t (:foreground "Red" :bold t))) "First group face")
+ (defface my-group-face-2
+ '((t (:foreground "DarkSeaGreen4" :bold t))) "Second group face")
+ (defface my-group-face-3
+ '((t (:foreground "Green4" :bold t))) "Third group face")
+ (defface my-group-face-4
+ '((t (:foreground "SteelBlue" :bold t))) "Fourth group face")
+ (defface my-group-face-5
+ '((t (:foreground "Blue" :bold t))) "Fifth group face")))
(setq gnus-group-highlight
'(((> unread 200) . my-group-face-1)
group from the server. If you give a numerical prefix @var{N}, @var{N}
determines the number of articles Gnus will fetch. If @var{N} is
positive, Gnus fetches the @var{N} newest articles, if @var{N} is
-negative, Gnus fetches the @var{abs(N)} oldest articles.
+negative, Gnus fetches the @code{abs(@var{N})} oldest articles.
+
+Thus, @kbd{SPC} enters the group normally, @kbd{C-u SPC} offers old
+articles, @kbd{C-u 4 2 SPC} fetches the 42 newest articles, and @kbd{C-u
+- 4 2 SPC} fetches the 42 oldest ones.
+
+When you are in the group (in the Summary buffer), you can type
+@kbd{M-g} to fetch new articles, or @kbd{C-u M-g} to also show the old
+ones.
@item RET
@kindex RET (Group)
command, but this one does it without expunging and hiding dormants
(@code{gnus-group-visible-select-group}).
-@item M-C-RET
-@kindex M-C-RET (Group)
+@item C-M-RET
+@kindex C-M-RET (Group)
@findex gnus-group-select-group-ephemerally
Finally, this command selects the current group ephemerally without
doing any processing of its contents
@vindex gnus-select-group-hook
@vindex gnus-auto-select-first
-@code{gnus-auto-select-first} control whether any articles are selected
+@vindex gnus-auto-select-subject
+If @code{gnus-auto-select-first} is non-@code{nil}, select an article
automatically when entering a group with the @kbd{SPACE} command.
+Which article this is is controlled by the
+@code{gnus-auto-select-subject} variable. Valid values for this
+variable is:
@table @code
-@item nil
-Don't select any articles when entering the group. Just display the
-full summary buffer.
-
-@item t
-Select the first unread article when entering the group.
-
-@item best
-Select the highest scored article in the group when entering the
-group.
+@item unread
+Place point on the subject line of the first unread article.
-@end table
+@item first
+Place point on the subject line of the first article.
-This variable can also be a function. In that case, that function will
-be called to place point on a subject line, and/or select some article.
-Useful functions include:
+@item unseen
+Place point on the subject line of the first unseen article.
-@table @code
-@item gnus-summary-first-unread-subject
-Place point on the subject line of the first unread article, but
-don't select the article.
+@item unseen-or-unread
+Place point on the subject line of the first unseen article, and if
+there is no such article, place point on the subject line of the first
+unread article.
-@item gnus-summary-first-unread-article
-Select the first unread article.
+@item best
+Place point on the subject line of the highest-scored unread article.
-@item gnus-summary-best-unread-article
-Select the highest-scored unread article.
@end table
+This variable can also be a function. In that case, that function
+will be called to place point on a subject line.
If you want to prevent automatic selection in some group (say, in a
-binary group with Huge articles) you can set this variable to @code{nil}
-in @code{gnus-select-group-hook}, which is called when a group is
+binary group with Huge articles) you can set the
+@code{gnus-auto-select-first} variable to @code{nil} in
+@code{gnus-select-group-hook}, which is called when a group is
selected.
It is recommended that you keep all your mail groups (if any) on quite
low levels (e.g. 1 or 2).
+Maybe the following description of the default behavior of Gnus helps to
+understand what these levels are all about. By default, Gnus shows you
+subscribed nonempty groups, but by hitting @kbd{L} you can have it show
+empty subscribed groups and unsubscribed groups, too. Type @kbd{l} to
+go back to showing nonempty subscribed groups again. Thus, unsubscribed
+groups are hidden, in a way.
+
+Zombie and killed groups are similar to unsubscribed groups in that they
+are hidden by default. But they are different from subscribed and
+unsubscribed groups in that Gnus doesn't ask the news server for
+information (number of messages, number of unread messages) on zombie
+and killed groups. Normally, you use @kbd{C-k} to kill the groups you
+aren't interested in. If most groups are killed, Gnus is faster.
+
+Why does Gnus distinguish between zombie and killed groups? Well, when
+a new group arrives on the server, Gnus by default makes it a zombie
+group. This means that you are normally not bothered with new groups,
+but you can type @kbd{A z} to get a list of all new groups. Subscribe
+the ones you like and kill the ones you don't want. (@kbd{A k} shows a
+list of killed groups.)
+
If you want to play with the level variables, you should show some care.
Set them once, and don't touch them ever again. Better yet, don't touch
them at all unless you know exactly what you're doing.
handy if you want to read the most important groups before you read the
rest.
+If this variable is @code{best}, Gnus will make the next newsgroup the
+one with the best level.
+
@vindex gnus-group-default-list-level
All groups with a level less than or equal to
@code{gnus-group-default-list-level} will be listed in the group buffer
Rename the current group to something else
(@code{gnus-group-rename-group}). This is valid only on some
groups---mail groups mostly. This command might very well be quite slow
-on some backends.
+on some back ends.
@item G c
@kindex G c (Group)
@findex gnus-group-enter-directory
@cindex nneething
Read an arbitrary directory as if it were a newsgroup with the
-@code{nneething} backend (@code{gnus-group-enter-directory}).
+@code{nneething} back end (@code{gnus-group-enter-directory}).
@xref{Anything Groups}.
@item G f
Make a group based on some file or other
(@code{gnus-group-make-doc-group}). If you give a prefix to this
command, you will be prompted for a file name and a file type.
-Currently supported types are @code{babyl}, @code{mbox}, @code{digest},
-@code{mmdf}, @code{news}, @code{rnews}, @code{clari-briefs},
-@code{rfc934}, @code{rfc822-forward}, @code{nsmail} and @code{forward}.
-If you run this command without a prefix, Gnus will guess at the file
+Currently supported types are @code{mbox}, @code{babyl},
+@code{digest}, @code{news}, @code{rnews}, @code{mmdf}, @code{forward},
+@code{rfc934}, @code{rfc822-forward}, @code{mime-parts},
+@code{standard-digest}, @code{slack-digest}, @code{clari-briefs},
+@code{nsmail}, @code{outlook}, @code{oe-dbx}, and @code{mailman}. If
+you run this command without a prefix, Gnus will guess at the file
type. @xref{Document Groups}.
@item G u
@item G w
@kindex G w (Group)
@findex gnus-group-make-web-group
-@cindex DejaNews
-@cindex Alta Vista
-@cindex InReference
+@cindex Google
@cindex nnweb
+@cindex gmane
Make an ephemeral group based on a web search
(@code{gnus-group-make-web-group}). If you give a prefix to this
command, make a solid group instead. You will be prompted for the
search engine type and the search string. Valid search engine types
-include @code{dejanews}, @code{altavista} and @code{reference}.
+include @code{google}, @code{dejanews}, and @code{gmane}.
@xref{Web Searches}.
-If you use the @code{dejanews} search engine, you can limit the search
+If you use the @code{google} search engine, you can limit the search
to a particular group by using a match string like
-@samp{~g alt.sysadmin.recovery shaving}.
+@samp{shaving group:alt.sysadmin.recovery}.
@item G DEL
@kindex G DEL (Group)
parameters have this form @emph{except} local variable specs, which are
not dotted pairs, but proper lists.
+Some parameters have correspondant customizable variables, each of which
+is an alist of regexps and values.
+
The following group parameters can be used:
@table @code
Address used by when doing followups and new posts.
@example
-(to-address . "some@@where.com")
+(to-address . "some@@where.com")
@end example
This is primarily useful in mail groups that represent closed mailing
group is therefore impossible---you have to send mail to the mailing
list address instead.
+See also @code{gnus-parameter-to-address-alist}.
+
@item to-list
@cindex to-list
-Address used when doing a @kbd{a} in that group.
+Address used when doing @kbd{a} in that group.
@example
(to-list . "some@@where.com")
@code{to-list} group parameter, one will be added automatically upon
sending the message.
+@findex gnus-mailing-list-mode
+@cindex Mail List Groups
+If this variable is set, @code{gnus-mailing-list-mode} is turned on when
+entering summary buffer.
+
+See also @code{gnus-parameter-to-list-alist}.
+
+@anchor{subscribed}
+@item subscribed
+@cindex subscribed
+If this parameter is set to @code{t}, Gnus will consider the
+to-address and to-list parameters for this group as addresses of
+mailing lists you are subscribed to. Giving Gnus this information is
+(only) a first step in getting it to generate correct Mail-Followup-To
+headers for your posts to these lists. Look here @pxref{(message)Mailing
+Lists} for a complete treatment of available MFT support.
+
+See also @code{gnus-find-subscribed-addresses}, the function that
+directly uses this group parameter.
+
@item visible
@cindex visible
If the group parameter list has the element @code{(visible . t)},
@item gcc-self
@cindex gcc-self
If @code{(gcc-self . t)} is present in the group parameter list, newly
-composed messages will be @code{Gcc}'d to the current group. If
+composed messages will be @code{Gcc}'d to the current group. If
@code{(gcc-self . none)} is present, no @code{Gcc:} header will be
generated, if @code{(gcc-self . "string")} is present, this string will
be inserted literally as a @code{gcc} header. This parameter takes
precedence over any default @code{Gcc} rules as described later
-(@pxref{Archived Messages}).
+(@pxref{Archived Messages}). CAVEAT:: It yields an error putting
+@code{(gcc-self . t)} in groups of a @code{nntp} server or so, because
+a @code{nntp} server doesn't accept articles.
@item auto-expire
@cindex auto-expire
. t)}, all articles read will be marked as expirable. For an
alternative approach, @pxref{Expiring Mail}.
+See also @code{gnus-auto-expirable-newsgroups}.
+
@item total-expire
@cindex total-expire
If the group parameter has an element that looks like
caution. Unread, ticked and dormant articles are not eligible for
expiry.
+See also @code{gnus-total-expirable-newsgroups}.
+
@item expiry-wait
@cindex expiry-wait
@vindex nnmail-expiry-wait-function
-If the group parameter has an element that looks like @code{(expiry-wait
-. 10)}, this value will override any @code{nnmail-expiry-wait} and
-@code{nnmail-expiry-wait-function} when expiring expirable messages.
-The value can either be a number of days (not necessarily an integer) or
-the symbols @code{never} or @code{immediate}.
+If the group parameter has an element that looks like
+@code{(expiry-wait . 10)}, this value will override any
+@code{nnmail-expiry-wait} and @code{nnmail-expiry-wait-function}
+(@pxref{Expiring Mail}) when expiring expirable messages. The value
+can either be a number of days (not necessarily an integer) or the
+symbols @code{never} or @code{immediate}.
@item score-file
@cindex score file group parameter
All adaptive score entries will be put into this file.
@item admin-address
+@cindex admin-address
When unsubscribing from a mailing list you should never send the
unsubscription notice to the mailing list itself. Instead, you'd send
messages to the administrative address. This parameter allows you to
put the admin address somewhere convenient.
@item display
+@cindex display
Elements that look like @code{(display . MODE)} say which articles to
display on entering the group. Valid values are:
@item all
Display all articles, both read and unread.
+@item an integer
+Display the last INTEGER articles in the group. This is the same as
+entering the group with C-u INTEGER.
+
@item default
Display the default visible articles, which normally includes unread and
ticked articles.
+
+@item an array
+Display articles that satisfy a predicate.
+
+Here are some examples:
+
+@table @code
+@item [unread]
+Display only unread articles.
+
+@item [not expire]
+Display everything except expirable articles.
+
+@item [and (not reply) (not expire)]
+Display everything except expirable and articles you've already
+responded to.
@end table
+The available operators are @code{not}, @code{and} and @code{or}.
+Predicates include @code{tick}, @code{unsend}, @code{undownload},
+@code{unread}, @code{dormant}, @code{expire}, @code{reply},
+@code{killed}, @code{bookmark}, @code{score}, @code{save},
+@code{cache}, @code{forward}, @code{unseen} and @code{recent}.
+
+@end table
+
+The @code{display} parameter works by limiting the summary buffer to
+the subset specified. You can pop the limit by using the @kbd{/ w}
+command (@pxref{Limiting}).
+
@item comment
-Elements that look like @code{(comment . "This is a comment")}
-are arbitrary comments on the group. They are currently ignored by
-Gnus, but provide a place for you to store information on particular
-groups.
+@cindex comment
+Elements that look like @code{(comment . "This is a comment")} are
+arbitrary comments on the group. You can display comments in the
+group line (@pxref{Group Line Specification}).
@item charset
+@cindex charset
Elements that look like @code{(charset . iso-8859-1)} will make
@code{iso-8859-1} the default charset; that is, the charset that will be
used for all articles that do not specify a charset.
-@item @var{(variable form)}
-You can use the group parameters to set variables local to the group you
-are entering. If you want to turn threading off in @samp{news.answers},
-you could put @code{(gnus-show-threads nil)} in the group parameters of
-that group. @code{gnus-show-threads} will be made into a local variable
-in the summary buffer you enter, and the form @code{nil} will be
-@code{eval}ed there.
+See also @code{gnus-group-charset-alist}.
-This can also be used as a group-specific hook function, if you'd like.
-If you want to hear a beep when you enter a group, you could put
-something like @code{(dummy-variable (ding))} in the parameters of that
-group. @code{dummy-variable} will be set to the result of the
-@code{(ding)} form, but who cares?
+@item ignored-charsets
+@cindex ignored-charset
+Elements that look like @code{(ignored-charsets x-unknown iso-8859-1)}
+will make @code{iso-8859-1} and @code{x-unknown} ignored; that is, the
+default charset will be used for decoding articles.
+
+See also @code{gnus-group-ignored-charsets-alist}.
@item posting-style
-You can store additional posting style information for this group only
-here (@pxref{Posting Styles}). The format is that of an entry in the
+@cindex posting-style
+You can store additional posting style information for this group
+here (@pxref{Posting Styles}). The format is that of an entry in the
@code{gnus-posting-styles} alist, except that there's no regexp matching
-the group name (of course). Style elements in this group parameter will
+the group name (of course). Style elements in this group parameter will
take precedence over the ones found in @code{gnus-posting-styles}.
For instance, if you want a funky name and signature in this group only,
@example
(posting-style
(name "Funky Name")
+ ("X-My-Header" "Funky Value")
(signature "Funky Signature"))
@end example
+@item post-method
+@cindex post-method
+If it is set, the value is used as the method for posting message
+instead of @code{gnus-post-method}.
+
+@item banner
+@cindex banner
+An item like @code{(banner . "regex")} causes any part of an article
+that matches the regular expression "regex" to be stripped. Instead of
+"regex", you can also use the symbol @code{signature} which strips the
+last signature or any of the elements of the alist
+@code{gnus-article-banner-alist}.
+
+@item sieve
+@cindex sieve
+This parameter contains a Sieve test that should match incoming mail
+that should be placed in this group. From this group parameter, a
+Sieve @samp{IF} control structure is generated, having the test as the
+condition and @samp{fileinto "group.name";} as the body.
+
+For example, if the INBOX.list.sieve group has the @code{(sieve
+address "sender" "sieve-admin@@extundo.com")} group parameter, when
+translating the group parameter into a Sieve script (@pxref{Sieve
+Commands}) the following Sieve code is generated:
+
+@example
+if address \"sender\" \"sieve-admin@@extundo.com\" @{
+ fileinto \"INBOX.list.sieve\";
+@}
+@end example
+
+The Sieve language is described in RFC 3028. @xref{Top, , Top, sieve,
+Emacs Sieve}.
+
+@item (@var{variable} @var{form})
+You can use the group parameters to set variables local to the group you
+are entering. If you want to turn threading off in @samp{news.answers},
+you could put @code{(gnus-show-threads nil)} in the group parameters of
+that group. @code{gnus-show-threads} will be made into a local variable
+in the summary buffer you enter, and the form @code{nil} will be
+@code{eval}ed there.
+
+@vindex gnus-list-identifiers
+A use for this feature, is to remove a mailing list identifier tag in
+the subject fields of articles. E.g. if the news group
+@samp{nntp+news.gnus.org:gmane.text.docbook.apps} has the tag
+@samp{DOC-BOOK-APPS:} in the subject of all articles, this tag can be
+removed from the article subjects in the summary buffer for the group by
+putting @code{(gnus-list-identifiers "DOCBOOK-APPS:")} into the group
+parameters for the group.
+
+
+This can also be used as a group-specific hook function, if you'd like.
+If you want to hear a beep when you enter a group, you could put
+something like @code{(dummy-variable (ding))} in the parameters of that
+group. @code{dummy-variable} will be set to the result of the
+@code{(ding)} form, but who cares?
+
@end table
-Use the @kbd{G p} command to edit group parameters of a group. You
-might also be interested in reading about topic parameters (@pxref{Topic
-Parameters}).
+Use the @kbd{G p} or the @kbd{G c} command to edit group parameters of a
+group. (@kbd{G p} presents you with a Lisp-based interface, @kbd{G c}
+presents you with a Customize-like interface. The latter helps avoid
+silly Lisp errors.) You might also be interested in reading about topic
+parameters (@pxref{Topic Parameters}).
+
+@vindex gnus-parameters
+Group parameters can be set via the @code{gnus-parameters} variable too.
+But some variables, such as @code{visible}, have no effect. For
+example:
+
+@example
+(setq gnus-parameters
+ '(("mail\\..*"
+ (gnus-show-threads nil)
+ (gnus-use-scoring nil)
+ (gnus-summary-line-format
+ "%U%R%z%I%(%[%d:%ub%-23,23f%]%) %s\n")
+ (gcc-self . t)
+ (display . all))
+
+ ("^nnimap:\\(foo.bar\\)$"
+ (to-group . "\\1"))
+
+ ("mail\\.me"
+ (gnus-use-scoring t))
+
+ ("list\\..*"
+ (total-expire . t)
+ (broken-reply-to . t))))
+@end example
+
+String value of parameters will be subjected to regexp substitution, as
+the @code{to-group} example shows.
@node Listing Groups
List all groups that have names or descriptions that match a regexp
(@code{gnus-group-description-apropos}).
+@item A c
+@kindex A c (Group)
+@findex gnus-group-list-cached
+List all groups with cached articles (@code{gnus-group-list-cached}).
+
+@item A ?
+@kindex A ? (Group)
+@findex gnus-group-list-dormant
+List all groups with dormant articles (@code{gnus-group-list-dormant}).
+
+@item A /
+@kindex A / (Group)
+@findex gnus-group-list-limit
+List groups limited within the current selection
+(@code{gnus-group-list-limit}).
+
+@item A f
+@kindex A f (Group)
+@findex gnus-group-list-flush
+Flush groups from the current selection (@code{gnus-group-list-flush}).
+
+@item A p
+@kindex A p (Group)
+@findex gnus-group-list-plus
+List groups plus the current selection (@code{gnus-group-list-plus}).
+
@end table
@vindex gnus-permanently-visible-groups
@findex gnus-group-sort-by-method
Sort alphabetically on the select method.
+@item gnus-group-sort-by-server
+@findex gnus-group-sort-by-server
+Sort alphabetically on the Gnus server name.
+
@end table
@item G S m
@kindex G S m (Group)
@findex gnus-group-sort-groups-by-method
-Sort the group buffer alphabetically by backend name
+Sort the group buffer alphabetically by back end name
(@code{gnus-group-sort-groups-by-method}).
+@item G S n
+@kindex G S n (Group)
+@findex gnus-group-sort-groups-by-real-name
+Sort the group buffer alphabetically by real (unprefixed) group name
+(@code{gnus-group-sort-groups-by-real-name}).
+
@end table
-All the commands below obeys the process/prefix convention
+All the commands below obey the process/prefix convention
(@pxref{Process/Prefix}).
When given a symbolic prefix (@pxref{Symbolic Prefixes}), all these
@item G P m
@kindex G P m (Group)
@findex gnus-group-sort-selected-groups-by-method
-Sort the groups alphabetically by backend name
+Sort the groups alphabetically by back end name
(@code{gnus-group-sort-selected-groups-by-method}).
+@item G P n
+@kindex G P n (Group)
+@findex gnus-group-sort-selected-groups-by-real-name
+Sort the groups alphabetically by real (unprefixed) group name
+(@code{gnus-group-sort-selected-groups-by-real-name}).
+
+@item G P s
+@kindex G P s (Group)
+@findex gnus-group-sort-selected-groups
+Sort the groups according to @code{gnus-group-sort-function}.
+
@end table
+And finally, note that you can use @kbd{C-k} and @kbd{C-y} to manually
+move groups around.
@node Group Maintenance
@kindex C-c C-x (Group)
@findex gnus-group-expire-articles
Run all expirable articles in the current group through the expiry
-process (if any) (@code{gnus-group-expire-articles}).
+process (if any) (@code{gnus-group-expire-articles}). That is, delete
+all expirable articles in the group that have been around for a while.
+(@pxref{Expiring Mail}).
-@item C-c M-C-x
-@kindex C-c M-C-x (Group)
+@item C-c C-M-x
+@kindex C-c C-M-x (Group)
@findex gnus-group-expire-all-groups
-Run all articles in all groups through the expiry process
+Run all expirable articles in all groups through the expiry process
(@code{gnus-group-expire-all-groups}).
@end table
@findex gnus-browse-exit
Exit browse mode (@code{gnus-browse-exit}).
+@item d
+@kindex d (Browse)
+@findex gnus-browse-describe-group
+Describe the current group (@code{gnus-browse-describe-group}).
+
@item ?
@kindex ? (Browse)
@findex gnus-browse-describe-briefly
@iftex
@iflatex
\gnusfigure{Group Topics}{400}{
-\put(75,50){\epsfig{figure=tmp/group-topic.ps,height=9cm}}
+\put(75,50){\epsfig{figure=ps/group-topic,height=9cm}}
}
@end iflatex
@end iftex
is a toggling command.)
Go ahead, just try it. I'll still be here when you get back. La de
-dum... Nice tune, that... la la la... What, you're back? Yes, and now
-press @kbd{l}. There. All your groups are now listed under
+dum... Nice tune, that... la la la... What, you're back? Yes, and
+now press @kbd{l}. There. All your groups are now listed under
@samp{misc}. Doesn't that make you feel all warm and fuzzy? Hot and
bothered?
If you want this permanently enabled, you should add that minor mode to
-the hook for the group mode:
+the hook for the group mode. Put the following line in your
+@file{~/.gnus} file:
@lisp
(add-hook 'gnus-group-mode-hook 'gnus-topic-mode)
@end lisp
@menu
-* Topic Variables:: How to customize the topics the Lisp Way.
-* Topic Commands:: Interactive E-Z commands.
-* Topic Sorting:: Sorting each topic individually.
-* Topic Topology:: A map of the world.
-* Topic Parameters:: Parameters that apply to all groups in a topic.
+* Topic Commands:: Interactive E-Z commands.
+* Topic Variables:: How to customize the topics the Lisp Way.
+* Topic Sorting:: Sorting each topic individually.
+* Topic Topology:: A map of the world.
+* Topic Parameters:: Parameters that apply to all groups in a topic.
@end menu
-@node Topic Variables
-@subsection Topic Variables
-@cindex topic variables
+@node Topic Commands
+@subsection Topic Commands
+@cindex topic commands
-Now, if you select a topic, it will fold/unfold that topic, which is
-really neat, I think.
+When the topic minor mode is turned on, a new @kbd{T} submap will be
+available. In addition, a few of the standard keys change their
+definitions slightly.
-@vindex gnus-topic-line-format
-The topic lines themselves are created according to the
-@code{gnus-topic-line-format} variable (@pxref{Formatting Variables}).
-Valid elements are:
+In general, the following kinds of operations are possible on topics.
+First of all, you want to create topics. Secondly, you want to put
+groups in topics and to move them around until you have an order you
+like. The third kind of operation is to show/hide parts of the whole
+shebang. You might want to hide a topic including its subtopics and
+groups, to get a better overview of the other groups.
+
+Here is a list of the basic keys that you might need to set up topics
+the way you like.
+
+@table @kbd
+
+@item T n
+@kindex T n (Topic)
+@findex gnus-topic-create-topic
+Prompt for a new topic name and create it
+(@code{gnus-topic-create-topic}).
+
+@item T TAB
+@itemx TAB
+@kindex T TAB (Topic)
+@kindex TAB (Topic)
+@findex gnus-topic-indent
+``Indent'' the current topic so that it becomes a sub-topic of the
+previous topic (@code{gnus-topic-indent}). If given a prefix,
+``un-indent'' the topic instead.
+
+@item M-TAB
+@kindex M-TAB (Topic)
+@findex gnus-topic-unindent
+``Un-indent'' the current topic so that it becomes a sub-topic of the
+parent of its current parent (@code{gnus-topic-unindent}).
-@table @samp
-@item i
-Indentation.
-@item n
-Topic name.
-@item v
-Visibility.
-@item l
-Level.
-@item g
-Number of groups in the topic.
-@item a
-Number of unread articles in the topic.
-@item A
-Number of unread articles in the topic and all its subtopics.
@end table
-@vindex gnus-topic-indent-level
-Each sub-topic (and the groups in the sub-topics) will be indented with
-@code{gnus-topic-indent-level} times the topic level number of spaces.
-The default is 2.
+The following two keys can be used to move groups and topics around.
+They work like the well-known cut and paste. @kbd{C-k} is like cut and
+@kbd{C-y} is like paste. Of course, this being Emacs, we use the terms
+kill and yank rather than cut and paste.
-@vindex gnus-topic-mode-hook
-@code{gnus-topic-mode-hook} is called in topic minor mode buffers.
+@table @kbd
-@vindex gnus-topic-display-empty-topics
-The @code{gnus-topic-display-empty-topics} says whether to display even
-topics that have no unread articles in them. The default is @code{t}.
+@item C-k
+@kindex C-k (Topic)
+@findex gnus-topic-kill-group
+Kill a group or topic (@code{gnus-topic-kill-group}). All groups in the
+topic will be removed along with the topic.
+@item C-y
+@kindex C-y (Topic)
+@findex gnus-topic-yank-group
+Yank the previously killed group or topic
+(@code{gnus-topic-yank-group}). Note that all topics will be yanked
+before all groups.
-@node Topic Commands
-@subsection Topic Commands
-@cindex topic commands
+So, to move a topic to the beginning of the list of topics, just hit
+@kbd{C-k} on it. This is like the `cut' part of cut and paste. Then,
+move the cursor to the beginning of the buffer (just below the `Gnus'
+topic) and hit @kbd{C-y}. This is like the `paste' part of cut and
+paste. Like I said -- E-Z.
-When the topic minor mode is turned on, a new @kbd{T} submap will be
-available. In addition, a few of the standard keys change their
-definitions slightly.
+You can use @kbd{C-k} and @kbd{C-y} on groups as well as on topics. So
+you can move topics around as well as groups.
+
+@end table
+
+After setting up the topics the way you like them, you might wish to
+hide a topic, or to show it again. That's why we have the following
+key.
@table @kbd
-@item T n
-@kindex T n (Topic)
-@findex gnus-topic-create-topic
-Prompt for a new topic name and create it
-(@code{gnus-topic-create-topic}).
+@item RET
+@kindex RET (Topic)
+@findex gnus-topic-select-group
+@itemx SPACE
+Either select a group or fold a topic (@code{gnus-topic-select-group}).
+When you perform this command on a group, you'll enter the group, as
+usual. When done on a topic line, the topic will be folded (if it was
+visible) or unfolded (if it was folded already). So it's basically a
+toggling command on topics. In addition, if you give a numerical
+prefix, group on that level (and lower) will be displayed.
+
+@end table
+
+Now for a list of other commands, in no particular order.
+
+@table @kbd
@item T m
@kindex T m (Topic)
(@code{gnus-topic-move-group}). This command uses the process/prefix
convention (@pxref{Process/Prefix}).
+@item T j
+@kindex T j (Topic)
+@findex gnus-topic-jump-to-topic
+Go to a topic (@code{gnus-topic-jump-to-topic}).
+
@item T c
@kindex T c (Topic)
@findex gnus-topic-copy-group
(@code{gnus-topic-copy-group}). This command uses the process/prefix
convention (@pxref{Process/Prefix}).
+@item T h
+@kindex T h (Topic)
+@findex gnus-topic-hide-topic
+Hide the current topic (@code{gnus-topic-hide-topic}). If given
+a prefix, hide the topic permanently.
+
+@item T s
+@kindex T s (Topic)
+@findex gnus-topic-show-topic
+Show the current topic (@code{gnus-topic-show-topic}). If given
+a prefix, show the topic permanently.
+
@item T D
@kindex T D (Topic)
@findex gnus-topic-remove-group
Remove the process mark from all groups in the current topic
(@code{gnus-topic-unmark-topic}).
-@item T TAB
-@itemx TAB
-@kindex T TAB (Topic)
-@kindex TAB (Topic)
-@findex gnus-topic-indent
-``Indent'' the current topic so that it becomes a sub-topic of the
-previous topic (@code{gnus-topic-indent}). If given a prefix,
-``un-indent'' the topic instead.
-
-@item M-TAB
-@kindex M-TAB (Topic)
-@findex gnus-topic-unindent
-``Un-indent'' the current topic so that it becomes a sub-topic of the
-parent of its current parent (@code{gnus-topic-unindent}).
-
-@item RET
-@kindex RET (Topic)
-@findex gnus-topic-select-group
-@itemx SPACE
-Either select a group or fold a topic (@code{gnus-topic-select-group}).
-When you perform this command on a group, you'll enter the group, as
-usual. When done on a topic line, the topic will be folded (if it was
-visible) or unfolded (if it was folded already). So it's basically a
-toggling command on topics. In addition, if you give a numerical
-prefix, group on that level (and lower) will be displayed.
-
@item C-c C-x
@kindex C-c C-x (Topic)
@findex gnus-topic-expire-articles
-Run all expirable articles in the current group or topic through the expiry
-process (if any) (@code{gnus-topic-expire-articles}).
-
-@item C-k
-@kindex C-k (Topic)
-@findex gnus-topic-kill-group
-Kill a group or topic (@code{gnus-topic-kill-group}). All groups in the
-topic will be removed along with the topic.
-
-@item C-y
-@kindex C-y (Topic)
-@findex gnus-topic-yank-group
-Yank the previously killed group or topic
-(@code{gnus-topic-yank-group}). Note that all topics will be yanked
-before all groups.
+Run all expirable articles in the current group or topic through the
+expiry process (if any)
+(@code{gnus-topic-expire-articles}). (@pxref{Expiring Mail}).
@item T r
@kindex T r (Topic)
List all groups that Gnus knows about in a topics-ified way
(@code{gnus-topic-list-active}).
+@item T M-n
+@kindex T M-n (Topic)
+@findex gnus-topic-goto-next-topic
+Go to the next topic (@code{gnus-topic-goto-next-topic}).
+
+@item T M-p
+@kindex T M-p (Topic)
+@findex gnus-topic-goto-previous-topic
+Go to the next topic (@code{gnus-topic-goto-previous-topic}).
+
@item G p
@kindex G p (Topic)
@findex gnus-topic-edit-parameters
@end table
+@node Topic Variables
+@subsection Topic Variables
+@cindex topic variables
+
+The previous section told you how to tell Gnus which topics to display.
+This section explains how to tell Gnus what to display about each topic.
+
+@vindex gnus-topic-line-format
+The topic lines themselves are created according to the
+@code{gnus-topic-line-format} variable (@pxref{Formatting Variables}).
+Valid elements are:
+
+@table @samp
+@item i
+Indentation.
+@item n
+Topic name.
+@item v
+Visibility.
+@item l
+Level.
+@item g
+Number of groups in the topic.
+@item a
+Number of unread articles in the topic.
+@item A
+Number of unread articles in the topic and all its subtopics.
+@end table
+
+@vindex gnus-topic-indent-level
+Each sub-topic (and the groups in the sub-topics) will be indented with
+@code{gnus-topic-indent-level} times the topic level number of spaces.
+The default is 2.
+
+@vindex gnus-topic-mode-hook
+@code{gnus-topic-mode-hook} is called in topic minor mode buffers.
+
+@vindex gnus-topic-display-empty-topics
+The @code{gnus-topic-display-empty-topics} says whether to display even
+topics that have no unread articles in them. The default is @code{t}.
+
+
@node Topic Sorting
@subsection Topic Sorting
@cindex topic sorting
@item T S m
@kindex T S m (Topic)
@findex gnus-topic-sort-groups-by-method
-Sort the current topic alphabetically by backend name
+Sort the current topic alphabetically by back end name
(@code{gnus-topic-sort-groups-by-method}).
+@item T S e
+@kindex T S e (Topic)
+@findex gnus-topic-sort-groups-by-server
+Sort the current topic alphabetically by server name
+(@code{gnus-topic-sort-groups-by-server}).
+
+@item T S s
+@kindex T S s
+@findex gnus-topic-sort-groups
+Sort the current topic according to the function(s) given by the
+@code{gnus-group-sort-function} variable
+(@code{gnus-topic-sort-groups}).
+
@end table
-@xref{Sorting Groups}, for more information about group sorting.
+When given a prefix argument, all these commands will sort in reverse
+order. @xref{Sorting Groups}, for more information about group
+sorting.
@node Topic Topology
ancestor) topic parameters. All valid group parameters are valid topic
parameters (@pxref{Group Parameters}).
+In addition, the following parameters are only valid as topic
+parameters:
+
+@table @code
+@item subscribe
+When subscribing new groups by topic (@pxref{Subscription Methods}), the
+@code{subscribe} topic parameter says what groups go in what topic. Its
+value should be a regexp to match the groups that should go in that
+topic.
+
+@item subscribe-level
+When subscribing new groups by topic (see the @code{subscribe} parameter),
+the group will be subscribed with the level specified in the
+@code{subscribe-level} instead of @code{gnus-level-default-subscribed}.
+
+@end table
+
Group parameters (of course) override topic parameters, and topic
parameters in sub-topics override topic parameters in super-topics. You
know. Normal inheritance rules. (@dfn{Rules} is here a noun, not a
@section Misc Group Stuff
@menu
-* Scanning New Messages:: Asking Gnus to see whether new messages have arrived.
-* Group Information:: Information and help on groups and Gnus.
-* Group Timestamp:: Making Gnus keep track of when you last read a group.
-* File Commands:: Reading and writing the Gnus files.
+* Scanning New Messages:: Asking Gnus to see whether new messages have arrived.
+* Group Information:: Information and help on groups and Gnus.
+* Group Timestamp:: Making Gnus keep track of when you last read a group.
+* File Commands:: Reading and writing the Gnus files.
+* Sieve Commands:: Managing Sieve scripts.
@end menu
@table @kbd
@kindex ^ (Group)
@findex gnus-group-enter-server-mode
Enter the server buffer (@code{gnus-group-enter-server-mode}).
-@xref{The Server Buffer}.
+@xref{Server Buffer}.
@item a
@kindex a (Group)
@findex gnus-group-post-news
-Post an article to a group (@code{gnus-group-post-news}). If given a
-prefix, the current group name will be used as the default.
+Start composing a message (a news by default)
+(@code{gnus-group-post-news}). If given a prefix, post to the group
+under the point. If the prefix is 1, prompt for a group to post to.
+Contrary to what the name of this function suggests, the prepared
+article might be a mail instead of a news, if a mail group is specified
+with the prefix argument. @xref{Composing Messages}.
@item m
@kindex m (Group)
@findex gnus-group-mail
-Mail a message somewhere (@code{gnus-group-mail}).
+Mail a message somewhere (@code{gnus-group-mail}). If given a prefix,
+use the posting style of the group under the point. If the prefix is 1,
+prompt for a group name to find the posting style.
+@xref{Composing Messages}.
+
+@item i
+@kindex i (Group)
+@findex gnus-group-news
+Start composing a news (@code{gnus-group-news}). If given a prefix,
+post to the group under the point. If the prefix is 1, prompt
+for group to post to. @xref{Composing Messages}.
+
+This function actually prepares a news even when using mail groups.
+This is useful for "posting" messages to mail groups without actually
+sending them over the network: they're just saved directly to the group
+in question. The corresponding back end must have a request-post method
+for this to work though.
@end table
Groups matching this regexp will always be listed in the group buffer,
whether they are empty or not.
-@end table
+@item gnus-group-name-charset-method-alist
+@vindex gnus-group-name-charset-method-alist
+An alist of method and the charset for group names. It is used to show
+non-ASCII group names.
+
+For example:
+@lisp
+(setq gnus-group-name-charset-method-alist
+ '(((nntp "news.com.cn") . cn-gb-2312)))
+@end lisp
+
+@item gnus-group-name-charset-group-alist
+@cindex UTF-8 group names
+@vindex gnus-group-name-charset-group-alist
+An alist of regexp of group name and the charset for group names. It
+is used to show non-ASCII group names. @code{((".*" utf-8))} is the
+default value if UTF-8 is supported, otherwise the default is
+@code{nil}.
+
+For example:
+@lisp
+(setq gnus-group-name-charset-group-alist
+ '(("\\.com\\.cn:" . cn-gb-2312)))
+@end lisp
+@end table
@node Scanning New Messages
@subsection Scanning New Messages
this command will check only groups of level @var{arg} and lower
(@code{gnus-group-get-new-news}). If given a non-numerical prefix, this
command will force a total re-reading of the active file(s) from the
-backend(s).
+back end(s).
@item M-g
@kindex M-g (Group)
If fetching from the first site is unsuccessful, Gnus will attempt to go
through @code{gnus-group-faq-directory} and try to open them one by one.
+@item H c
+@kindex H c (Group)
+@findex gnus-group-fetch-charter
+@vindex gnus-group-charter-alist
+@cindex charter
+Try to open the charter for the current group in a web browser
+(@code{gnus-group-fetch-charter}). Query for a group if given a
+prefix argument.
+
+Gnus will use @code{gnus-group-charter-alist} to find the location of
+the charter. If no location is known, Gnus will fetch the control
+messages for the group, which in some cases includes the charter.
+
+@item H C
+@kindex H C (Group)
+@findex gnus-group-fetch-control
+@vindex gnus-group-fetch-control-use-browse-url
+@cindex control message
+Fetch the control messages for the group from the archive at
+@code{ftp.isc.org} (@code{gnus-group-fetch-control}). Query for a
+group if given a prefix argument.
+
+If @code{gnus-group-fetch-control-use-browse-url} is non-@code{nil},
+Gnus will open the control messages in a browser using
+@code{browse-url}. Otherwise they are fetched using @code{ange-ftp}
+and displayed in an ephemeral group.
+
+Note that the control messages are compressed. To use this command
+you need to turn on @code{auto-compression-mode}
+(@pxref{(emacs)Compressed Files}).
+
@item H d
@itemx C-c C-d
@c @icon{gnus-group-describe-group}
"%M\%S\%p\%P\%5y: %(%-40,40g%) %6,6~(cut 2)d\n")
@end lisp
+If you would like greater control of the time format, you can use a
+user-defined format spec. Something like the following should do the
+trick:
+
+@lisp
+(setq gnus-group-line-format
+ "%M\%S\%p\%P\%5y: %(%-40,40g%) %ud\n")
+(defun gnus-user-format-function-d (headers)
+ (let ((time (gnus-group-timestamp gnus-tmp-group)))
+ (if time
+ (format-time-string "%b %d %H:%M" time)
+ "")))
+@end lisp
+
@node File Commands
@subsection File Commands
@end table
-@node The Summary Buffer
-@chapter The Summary Buffer
+@node Sieve Commands
+@subsection Sieve Commands
+@cindex group sieve commands
+
+Sieve is a server-side mail filtering language. In Gnus you can use
+the @code{sieve} group parameter (@pxref{Group Parameters}) to specify
+sieve rules that should apply to each group. Gnus provides two
+commands to translate all these group parameters into a proper Sieve
+script that can be transfered to the server somehow.
+
+@vindex gnus-sieve-file
+@vindex gnus-sieve-region-start
+@vindex gnus-sieve-region-end
+The generated Sieve script is placed in @code{gnus-sieve-file} (by
+default @file{~/.sieve}). The Sieve code that Gnus generate is placed
+between two delimiters, @code{gnus-sieve-region-start} and
+@code{gnus-sieve-region-end}, so you may write additional Sieve code
+outside these delimiters that will not be removed the next time you
+regenerate the Sieve script.
+
+@vindex gnus-sieve-crosspost
+The variable @code{gnus-sieve-crosspost} controls how the Sieve script
+is generated. If it is non-@code{nil} (the default) articles is
+placed in all groups that have matching rules, otherwise the article
+is only placed in the group with the first matching rule. For
+example, the group parameter @samp{(sieve address "sender"
+"owner-ding@@hpc.uh.edu")} will generate the following piece of Sieve
+code if @code{gnus-sieve-crosspost} is @code{nil}. (When
+@code{gnus-sieve-crosspost} is non-@code{nil}, it looks the same
+except that the line containing the call to @code{stop} is removed.)
+
+@example
+if address "sender" "owner-ding@@hpc.uh.edu" @{
+ fileinto "INBOX.ding";
+ stop;
+@}
+@end example
+
+@xref{Top, ,Top, sieve, Emacs Sieve}.
+
+@table @kbd
+
+@item D g
+@kindex D g (Group)
+@findex gnus-sieve-generate
+@vindex gnus-sieve-file
+@cindex generating sieve script
+Regenerate a Sieve script from the @code{sieve} group parameters and
+put you into the @code{gnus-sieve-file} without saving it.
+
+@item D u
+@kindex D u (Group)
+@findex gnus-sieve-update
+@vindex gnus-sieve-file
+@cindex updating sieve script
+Regenerates the Gnus managed part of @code{gnus-sieve-file} using the
+@code{sieve} group parameters, save the file and upload it to the
+server using the @code{sieveshell} program.
+
+@end table
+
+
+@node Summary Buffer
+@chapter Summary Buffer
@cindex summary buffer
A line for each article is displayed in the summary buffer. You can
* Choosing Articles:: Reading articles.
* Paging the Article:: Scrolling the current article.
* Reply Followup and Post:: Posting articles.
-* Canceling and Superseding:: ``Whoops, I shouldn't have called him that.''
+* Delayed Articles:: Send articles at a later time.
* Marking Articles:: Marking articles as read, expirable, etc.
* Limiting:: You can limit the summary buffer.
* Threading:: How threads are made.
-* Sorting:: How articles and threads are sorted.
+* Sorting the Summary Buffer:: How articles and threads are sorted.
* Asynchronous Fetching:: Gnus might be able to pre-fetch articles.
* Article Caching:: You may store articles in a cache.
* Persistent Articles:: Making articles expiry-resistant.
* Tree Display:: A more visual display of threads.
* Mail Group Commands:: Some commands can only be used in mail groups.
* Various Summary Stuff:: What didn't fit anywhere else.
-* Exiting the Summary Buffer:: Returning to the Group buffer.
+* Exiting the Summary Buffer:: Returning to the Group buffer,
+ or reselecting the current group.
* Crosspost Handling:: How crossposted articles are dealt with.
* Duplicate Suppression:: An alternative when crosspost handling fails.
+* Security:: Decrypt and Verify.
+* Mailing List:: Mailing list minor mode.
@end menu
@iftex
@iflatex
\gnusfigure{The Summary Buffer}{180}{
-\put(0,0){\epsfig{figure=tmp/summary.ps,width=7.5cm}}
-\put(445,0){\makebox(0,0)[br]{\epsfig{figure=tmp/summary-article.ps,width=7.5cm}}}
+\put(0,0){\epsfig{figure=ps/summary,width=7.5cm}}
+\put(445,0){\makebox(0,0)[br]{\epsfig{figure=ps/summary-article,width=7.5cm}}}
}
@end iflatex
@end iftex
@menu
-* Summary Buffer Lines:: You can specify how summary lines should look.
-* To From Newsgroups:: How to not display your own name.
-* Summary Buffer Mode Line:: You can say how the mode line should look.
-* Summary Highlighting:: Making the summary buffer all pretty and nice.
+* Summary Buffer Lines:: You can specify how summary lines should look.
+* To From Newsgroups:: How to not display your own name.
+* Summary Buffer Mode Line:: You can say how the mode line should look.
+* Summary Highlighting:: Making the summary buffer all pretty and nice.
@end menu
@findex mail-extract-address-components
lines as a normal @code{format} string, with some extensions
(@pxref{Formatting Variables}).
-The default string is @samp{%U%R%z%I%(%[%4L: %-20,20n%]%) %s\n}.
+There should always be a colon or a point position marker on the line;
+the cursor always moves to the point position marker or the colon after
+performing an operation. (Of course, Gnus wouldn't be Gnus if it wasn't
+possible to change this. Just write a new function
+@code{gnus-goto-colon} which does whatever you like with the cursor.)
+@xref{Positioning Point}.
+
+The default string is @samp{%U%R%z%I%(%[%4L: %-23,23f%]%) %s\n}.
-The following format specification characters are understood:
+The following format specification characters and extended format
+specification(s) are understood:
@table @samp
@item N
Article number.
@item S
-Subject string.
+Subject string. List identifiers stripped,
+@code{gnus-list-identifies}. @xref{Article Hiding}.
@item s
Subject if the article is the root of the thread or the previous article
had a different subject, @code{gnus-summary-same-subject} otherwise.
@item n
The name (from the @code{From} header).
@item f
-The name, code @code{To} header or the @code{Newsgroups} header
-(@pxref{To From Newsgroups}).
+The name, @code{To} header or the @code{Newsgroups} header (@pxref{To
+From Newsgroups}).
@item a
The name (from the @code{From} header). This differs from the @code{n}
spec in that it uses the function designated by the
@item L
Number of lines in the article.
@item c
-Number of characters in the article.
+Number of characters in the article. This specifier is not supported
+in some methods (like nnfolder).
+@item k
+Pretty-printed version of the number of characters in the article;
+for example, @samp{1.2k} or @samp{0.4M}.
@item I
Indentation based on thread level (@pxref{Customizing Threading}).
+@item B
+A complex trn-style thread tree, showing response-connecting trace
+lines. A thread could be drawn like this:
+
+@example
+>
++->
+| +->
+| | \->
+| | \->
+| \->
++->
+\->
+@end example
+
+You can customize the appearance with the following options. Note
+that it is possible to make the thread display look really neat by
+replacing the default ASCII characters with graphic line-drawing
+glyphs.
+@table @code
+@item gnus-sum-thread-tree-root
+@vindex gnus-sum-thread-tree-root
+Used for the root of a thread. If @code{nil}, use subject
+instead. The default is @samp{> }.
+
+@item gnus-sum-thread-tree-single-indent
+@vindex gnus-sum-thread-tree-single-indent
+Used for a thread with just one message. If @code{nil}, use subject
+instead. The default is @samp{}.
+
+@item gnus-sum-thread-tree-vertical
+@vindex gnus-sum-thread-tree-vertical
+Used for drawing a vertical line. The default is @samp{| }.
+
+@item gnus-sum-thread-tree-indent
+@vindex gnus-sum-thread-tree-indent
+Used for indenting. The default is @samp{ }.
+
+@item gnus-sum-thread-tree-leaf-with-other
+@vindex gnus-sum-thread-tree-leaf-with-other
+Used for a leaf with brothers. The default is @samp{+-> }.
+
+@item gnus-sum-thread-tree-single-leaf
+@vindex gnus-sum-thread-tree-single-leaf
+Used for a leaf without brothers. The default is @samp{\-> }
+
+@end table
+
@item T
Nothing if the article is a root and lots of spaces if it isn't (it
pushes everything after it off the screen).
@item <
Twenty minus thread level spaces.
@item U
-Unread.
+Unread. @xref{Read Articles}.
@item R
This misleadingly named specifier is the @dfn{secondary mark}. This
mark will say whether the article has been replied to, has been cached,
-or has been saved.
+or has been saved. @xref{Other Marks}.
@item i
Score as a number (@pxref{Scoring}).
The line number.
@item O
Download mark.
+@item &user-date;
+Age sensitive date format. Various date format is defined in
+@code{gnus-user-date-format-alist}.
@item u
User defined specifier. The next character in the format string should
be a letter. Gnus will call the function
into the summary just like information from any other summary specifier.
@end table
+Text between @samp{%(} and @samp{%)} will be highlighted with
+@code{gnus-mouse-face} when the mouse point is placed inside the area.
+There can only be one such area.
+
The @samp{%U} (status), @samp{%R} (replied) and @samp{%z} (zcore) specs
have to be handled with care. For reasons of efficiency, Gnus will
compute what column these characters will end up in, and ``hard-code''
A related variable is @code{nnmail-extra-headers}, which controls when
to include extra headers when generating overview (@sc{nov}) files. If
you have old overview files, you should regenerate them after changing
-this variable.
+this variable, by entering the server buffer using `^', and then `g' on
+the appropriate mail server (e.g. nnml) to cause regeneration.
@vindex gnus-summary-line-format
You also have to instruct Gnus to display the data by changing the
@code{%n} spec to the @code{%f} spec in the
@code{gnus-summary-line-format} variable.
-In summary, you'd typically do something like the following:
+In summary, you'd typically put something like the following in
+@file{~/.gnus}:
@lisp
(setq gnus-extra-headers
'(To Newsgroups))
(setq nnmail-extra-headers gnus-extra-headers)
(setq gnus-summary-line-format
- "%U%R%z%I%(%[%4L: %-20,20f%]%) %s\n")
+ "%U%R%z%I%(%[%4L: %-23,23f%]%) %s\n")
(setq gnus-ignored-from-addresses
"Your Name Here")
@end lisp
-Now, this is mostly useful for mail groups, where you have control over
+(The values listed above are the default values in Gnus. Alter them
+to fit your needs.)
+
+A note for news server administrators, or for users who wish to try to
+convince their news server administrator to provide some additional
+support:
+
+The above is mostly useful for mail groups, where you have control over
the @sc{nov} files that are created. However, if you can persuade your
-nntp admin to add:
+nntp admin to add (in the usual implementation, notably INN):
@example
Newsgroups:full
@item gnus-summary-highlight
@vindex gnus-summary-highlight
Summary lines are highlighted according to this variable, which is a
-list where the elements are of the format @var{(FORM . FACE)}. If you
-would, for instance, like ticked articles to be italic and high-scored
-articles to be bold, you could set this variable to something like
+list where the elements are of the format @code{(@var{form}
+. @var{face})}. If you would, for instance, like ticked articles to be
+italic and high-scored articles to be bold, you could set this variable
+to something like
@lisp
(((eq mark gnus-ticked-mark) . italic)
((> score default) . bold))
@end lisp
-As you may have guessed, if @var{FORM} returns a non-@code{nil} value,
-@var{FACE} will be applied to the line.
+As you may have guessed, if @var{form} returns a non-@code{nil} value,
+@var{face} will be applied to the line.
@end table
Go to the previous summary line of an unread article
(@code{gnus-summary-prev-unread-subject}).
-@item G j
-@itemx j
-@kindex j (Summary)
-@kindex G j (Summary)
-@findex gnus-summary-goto-article
-Ask for an article number or @code{Message-ID}, and then go to that
-article (@code{gnus-summary-goto-article}).
-
@item G g
@kindex G g (Summary)
@findex gnus-summary-goto-subject
the next group. If this variable is @code{t} and the next group is
empty, Gnus will exit summary mode and return to the group buffer. If
this variable is neither @code{t} nor @code{nil}, Gnus will select the
-next group, no matter whether it has any unread articles or not. As a
-special case, if this variable is @code{quietly}, Gnus will select the
-next group without asking for confirmation. If this variable is
-@code{almost-quietly}, the same will happen only if you are located on
-the last article in the group. Finally, if this variable is
-@code{slightly-quietly}, the @kbd{Z n} command will go to the next group
-without confirmation. Also @pxref{Group Levels}.
+next group with unread articles. As a special case, if this variable
+is @code{quietly}, Gnus will select the next group without asking for
+confirmation. If this variable is @code{almost-quietly}, the same
+will happen only if you are located on the last article in the group.
+Finally, if this variable is @code{slightly-quietly}, the @kbd{Z n}
+command will go to the next group without confirmation. Also
+@pxref{Group Levels}.
@item gnus-auto-select-same
@vindex gnus-auto-select-same
@cindex selecting articles
@menu
-* Choosing Commands:: Commands for choosing articles.
-* Choosing Variables:: Variables that influence these commands.
+* Choosing Commands:: Commands for choosing articles.
+* Choosing Variables:: Variables that influence these commands.
@end menu
None of the following movement commands understand the numeric prefix,
and they all select and display an article.
+If you want to fetch new articles or redisplay the group, see
+@ref{Exiting the Summary Buffer}.
+
@table @kbd
@item SPACE
@kindex SPACE (Summary)
@kindex G b (Summary)
@kindex , (Summary)
@findex gnus-summary-best-unread-article
-Go to the article with the highest score
-(@code{gnus-summary-best-unread-article}).
+Go to the unread article with the highest score
+(@code{gnus-summary-best-unread-article}). If given a prefix argument,
+go to the first unread article that has a score over the default score.
@item G l
@itemx l
history as you like, while @kbd{l} toggles the two last read articles.
For a somewhat related issue (if you use these commands a lot),
@pxref{Article Backlog}.
+
+@item G j
+@itemx j
+@kindex j (Summary)
+@kindex G j (Summary)
+@findex gnus-summary-goto-article
+Ask for an article number or @code{Message-ID}, and then go to that
+article (@code{gnus-summary-goto-article}).
+
@end table
@item gnus-select-article-hook
@vindex gnus-select-article-hook
This hook is called whenever an article is selected. By default it
-exposes any threads hidden under the selected article.
+exposes any threads hidden under the selected article. If you wish
+that the Agent saves all articles you read, putting
+@code{gnus-agent-fetch-selected-article} on this hook should do it.
@item gnus-mark-article-hook
@vindex gnus-mark-article-hook
@kindex A g (Summary)
@kindex g (Summary)
@findex gnus-summary-show-article
+@vindex gnus-summary-show-article-charset-alist
(Re)fetch the current article (@code{gnus-summary-show-article}). If
given a prefix, fetch the current article, but don't run any of the
article treatment functions. This will give you a ``raw'' article, just
the way it came from the server.
+If given a numerical prefix, you can do semi-manual charset stuff.
+@kbd{C-u 0 g cn-gb-2312 RET} will decode the message as if it were
+encoded in the @code{cn-gb-2312} charset. If you have
+
+@lisp
+(setq gnus-summary-show-article-charset-alist
+ '((1 . cn-gb-2312)
+ (2 . big5)))
+@end lisp
+
+then you can say @kbd{C-u 1 g} to get the same effect.
+
@item A <
@itemx <
@kindex < (Summary)
@section Reply, Followup and Post
@menu
-* Summary Mail Commands:: Sending mail.
-* Summary Post Commands:: Sending news.
+* Summary Mail Commands:: Sending mail.
+* Summary Post Commands:: Sending news.
+* Summary Message Commands:: Other Message-related commands.
+* Canceling and Superseding::
@end menu
message (@code{gnus-summary-wide-reply-with-original}). This command uses
the process/prefix convention.
+@item S v
+@kindex S v (Summary)
+@findex gnus-summary-very-wide-reply
+Mail a very wide reply to the author of the current article
+(@code{gnus-summary-wide-reply}). A @dfn{very wide reply} is a reply
+that goes out to all people listed in the @code{To}, @code{From} (or
+@code{Reply-to}) and @code{Cc} headers in all the process/prefixed
+articles. This command uses the process/prefix convention.
+
+@item S V
+@kindex S V (Summary)
+@findex gnus-summary-very-wide-reply-with-original
+Mail a very wide reply to the author of the current article and include the
+original message (@code{gnus-summary-very-wide-reply-with-original}). This
+command uses the process/prefix convention.
+
+@item S B r
+@kindex S B r (Summary)
+@findex gnus-summary-reply-broken-reply-to
+Mail a reply to the author of the current article but ignore the
+@code{Reply-To} field (@code{gnus-summary-reply-broken-reply-to}).
+
+@item S B R
+@kindex S B R (Summary)
+@findex gnus-summary-reply-broken-reply-to-with-original
+Mail a reply to the author of the current article and include the
+original message but ignore the @code{Reply-To} field
+(@code{gnus-summary-reply-broken-reply-to-with-original}).
+
@item S o m
+@itemx C-c C-f
@kindex S o m (Summary)
+@kindex C-c C-f (Summary)
@findex gnus-summary-mail-forward
@c @icon{gnus-summary-mail-forward}
Forward the current article to some other person
-(@code{gnus-summary-mail-forward}). If given a prefix, include the full
-headers of the forwarded article.
+(@code{gnus-summary-mail-forward}). If no prefix is given, the message
+is forwarded according to the value of (@code{message-forward-as-mime})
+and (@code{message-forward-show-mml}); if the prefix is 1, decode the
+message and forward directly inline; if the prefix is 2, forward message
+as an rfc822 @sc{mime} section; if the prefix is 3, decode message and
+forward as an rfc822 @sc{mime} section; if the prefix is 4, forward message
+directly inline; otherwise, the message is forwarded as no prefix given
+but use the flipped value of (@code{message-forward-as-mime}). By
+default, the message is decoded and forwarded as an rfc822 @sc{mime}
+section.
@item S m
@itemx m
@kindex S m (Summary)
@findex gnus-summary-mail-other-window
@c @icon{gnus-summary-mail-originate}
-Send a mail to some other person
-(@code{gnus-summary-mail-other-window}).
+Prepare a mail (@code{gnus-summary-mail-other-window}). By default, use
+the posting style of the current group. If given a prefix, disable that.
+If the prefix is 1, prompt for a group name to find the posting style.
+
+@item S i
+@itemx i
+@kindex i (Summary)
+@kindex S i (Summary)
+@findex gnus-summary-news-other-window
+Prepare a news (@code{gnus-summary-news-other-window}). By default,
+post to the current group. If given a prefix, disable that. If the
+prefix is 1, prompt for a group to post to.
+
+This function actually prepares a news even when using mail groups.
+This is useful for "posting" messages to mail groups without actually
+sending them over the network: they're just saved directly to the group
+in question. The corresponding back end must have a request-post method
+for this to work though.
@item S D b
@kindex S D b (Summary)
ship a mail to a different account of yours. (If you're both
@code{root} and @code{postmaster} and get a mail for @code{postmaster}
to the @code{root} account, you may want to resend it to
-@code{postmaster}. Ordnung muß sein!
+@code{postmaster}. Ordnung muss sein!
This command understands the process/prefix convention
(@pxref{Process/Prefix}).
@end table
-Also @pxref{(message)Header Commands} for more information.
+Also @xref{Header Commands, ,Header Commands, message, The Message
+Manual}, for more information.
@node Summary Post Commands
@kindex S p (Summary)
@findex gnus-summary-post-news
@c @icon{gnus-summary-post-news}
-Post an article to the current group
-(@code{gnus-summary-post-news}).
+Prepare for posting an article (@code{gnus-summary-post-news}). By
+default, post to the current group. If given a prefix, disable that.
+If the prefix is 1, prompt for another group instead.
@item S f
@itemx f
@kindex S o p (Summary)
@findex gnus-summary-post-forward
Forward the current article to a newsgroup
-(@code{gnus-summary-post-forward}). If given a prefix, include the full
-headers of the forwarded article.
+(@code{gnus-summary-post-forward}).
+ If no prefix is given, the message is forwarded according to the value
+of (@code{message-forward-as-mime}) and
+(@code{message-forward-show-mml}); if the prefix is 1, decode the
+message and forward directly inline; if the prefix is 2, forward message
+as an rfc822 @sc{mime} section; if the prefix is 3, decode message and
+forward as an rfc822 @sc{mime} section; if the prefix is 4, forward message
+directly inline; otherwise, the message is forwarded as no prefix given
+but use the flipped value of (@code{message-forward-as-mime}). By
+default, the message is decoded and forwarded as an rfc822 @sc{mime} section.
@item S O p
@kindex S O p (Summary)
@findex gnus-uu-post-news
@c @icon{gnus-uu-post-news}
Uuencode a file, split it into parts, and post it as a series
-(@code{gnus-uu-post-news}). (@pxref{Uuencoding and Posting}).
+(@code{gnus-uu-post-news}). (@pxref{Uuencoding and Posting}).
@end table
-Also @pxref{(message)Header Commands} for more information.
+Also @xref{Header Commands, ,Header Commands, message, The Message
+Manual}, for more information.
+
+
+@node Summary Message Commands
+@subsection Summary Message Commands
+
+@table @kbd
+@item S y
+@kindex S y (Summary)
+@findex gnus-summary-yank-message
+Yank the current article into an already existing Message composition
+buffer (@code{gnus-summary-yank-message}). This command prompts for
+what message buffer you want to yank into, and understands the
+process/prefix convention (@pxref{Process/Prefix}).
+
+@end table
@node Canceling and Superseding
-@section Canceling Articles
+@subsection Canceling Articles
@cindex canceling articles
@cindex superseding articles
Just remember, kids: There is no 'c' in 'supersede'.
+@node Delayed Articles
+@section Delayed Articles
+@cindex delayed sending
+@cindex send delayed
+
+Sometimes, you might wish to delay the sending of a message. For
+example, you might wish to arrange for a message to turn up just in time
+to remind your about the birthday of your Significant Other. For this,
+there is the @code{gnus-delay} package. Setup is simple:
+
+@lisp
+(gnus-delay-initialize)
+@end lisp
+
+@findex gnus-delay-article
+Normally, to send a message you use the @kbd{C-c C-c} command from
+Message mode. To delay a message, use @kbd{C-c C-j}
+(@code{gnus-delay-article}) instead. This will ask you for how long the
+message should be delayed. Possible answers are:
+
+@itemize @bullet
+@item
+A time span. Consists of an integer and a letter. For example,
+@code{42d} means to delay for 42 days. Available letters are @code{m}
+(minutes), @code{h} (hours), @code{d} (days), @code{w} (weeks), @code{M}
+(months) and @code{Y} (years).
+
+@item
+A specific date. Looks like @code{YYYYY-MM-DD}. The message will be
+delayed until that day, at a specific time (eight o'clock by default).
+See also @code{gnus-delay-default-hour}.
+
+@item
+A specific time of day. Given in @code{hh:mm} format, 24h, no am/pm
+stuff. The deadline will be at that time today, except if that time has
+already passed, then it's at the given time tomorrow. So if it's ten
+o'clock in the morning and you specify @code{11:15}, then the deadline
+is one hour and fifteen minutes hence. But if you specify @code{9:20},
+that means a time tomorrow.
+@end itemize
+
+The action of the @code{gnus-delay-article} command is influenced by a
+couple of variables:
+
+@table @code
+@item gnus-delay-default-hour
+@vindex gnus-delay-default-hour
+When you specify a specific date, the message will be due on that hour
+on the given date. Possible values are integers 0 through 23.
+
+@item gnus-delay-default-delay
+@vindex gnus-delay-default-delay
+This is a string and gives the default delay. It can be of any of the
+formats described above.
+
+@item gnus-delay-group
+@vindex gnus-delay-group
+Delayed articles will be kept in this group on the drafts server until
+they are due. You probably don't need to change this. The default
+value is @code{"delayed"}.
+
+@item gnus-delay-header
+@vindex gnus-delay-header
+The deadline for each article will be stored in a header. This variable
+is a string and gives the header name. You probably don't need to
+change this. The default value is @code{"X-Gnus-Delayed"}.
+@end table
+
+The way delaying works is like this: when you use the
+@code{gnus-delay-article} command, you give a certain delay. Gnus
+calculates the deadline of the message and stores it in the
+@code{X-Gnus-Delayed} header and puts the message in the
+@code{nndraft:delayed} group.
+
+And whenever you get new news, Gnus looks through the group for articles
+which are due and sends them. It uses the @code{gnus-delay-send-queue}
+function for this. By default, this function is added to the hook
+@code{gnus-get-new-news-hook}. But of course, you can change this.
+Maybe you want to use the demon to send drafts? Just tell the demon to
+execute the @code{gnus-delay-send-queue} function.
+
+@table @code
+@item gnus-delay-initialize
+@findex gnus-delay-initialize
+By default, this function installs @code{gnus-delay-send-queue} in
+@code{gnus-get-new-news-hook}. But it accepts the optional second
+argument @code{no-check}. If it is non-@code{nil},
+@code{gnus-get-new-news-hook} is not changed. The optional first
+argument is ignored.
+
+For example, @code{(gnus-delay-initialize nil t)} means to do nothing.
+Presumably, you want to use the demon for sending due delayed articles.
+Just don't forget to set that up :-)
+@end table
+
@node Marking Articles
@section Marking Articles
In addition, you also have marks that do not affect readedness.
@menu
-* Unread Articles:: Marks for unread articles.
-* Read Articles:: Marks for read articles.
-* Other Marks:: Marks that do not affect readedness.
+* Unread Articles:: Marks for unread articles.
+* Read Articles:: Marks for read articles.
+* Other Marks:: Marks that do not affect readedness.
@end menu
@ifinfo
@dfn{Ticked articles} are articles that will remain visible always. If
you see an article that you find interesting, or you want to put off
reading it, or replying to it, until sometime later, you'd typically
-tick it. However, articles can be expired, so if you want to keep an
-article forever, you'll have to make it persistent (@pxref{Persistent
-Articles}).
+tick it. However, articles can be expired (from news servers by the
+news server software, Gnus itself never expires ticked messages), so if
+you want to keep an article forever, you'll have to make it persistent
+(@pxref{Persistent Articles}).
@item ?
@vindex gnus-dormant-mark
@dfn{Dormant articles} will only appear in the summary buffer if there
are followups to it. If you want to see them even if they don't have
followups, you can use the @kbd{/ D} command (@pxref{Limiting}).
+Otherwise (except for the visibility issue), they are just like ticked
+messages.
@item SPACE
@vindex gnus-unread-mark
@item F
@vindex gnus-souped-mark
-@sc{SOUP}ed article (@code{gnus-souped-mark}). @xref{SOUP}.
+@sc{soup}ed article (@code{gnus-souped-mark}). @xref{SOUP}.
@item Q
@vindex gnus-sparse-mark
@item M
@vindex gnus-duplicate-mark
Article marked as read by duplicate suppression
-(@code{gnus-duplicated-mark}). @xref{Duplicate Suppression}.
+(@code{gnus-duplicate-mark}). @xref{Duplicate Suppression}.
@end table
(@code{gnus-replied-mark}).
@item
+@vindex gnus-forwarded-mark
+All articles that you have forwarded will be marked with an @samp{F} in
+the second column (@code{gnus-forwarded-mark}).
+
+@item
@vindex gnus-cached-mark
Articles stored in the article cache will be marked with an @samp{*} in
the second column (@code{gnus-cached-mark}). @xref{Article Caching}.
(@code{gnus-saved-mark}).
@item
+@vindex gnus-recent-mark
+Articles that according to the server haven't been shown to the user
+before are marked with a @samp{N} in the second column
+(@code{gnus-recent-mark}). Note that not all servers support this
+mark, in which case it simply never appears. Compare with
+@code{gnus-unseen-mark}.
+
+@item
+@vindex gnus-unseen-mark
+Articles that haven't been seen before in Gnus by the user are marked
+with a @samp{.} in the second column (@code{gnus-unseen-mark}).
+Compare with @code{gnus-recent-mark}.
+
+@item
+@vindex gnus-undownloaded-mark
+When using the Gnus agent @pxref{Agent Basics}, some articles might not
+have been downloaded. Such articles cannot be viewed while you are
+offline (unplugged). These articles get the @samp{@@} mark in the
+first column. (The variable @code{gnus-undownloaded-mark} controls
+which character to use.)
+
+@item
+@vindex gnus-downloadable-mark
+The Gnus agent @pxref{Agent Basics} downloads some articles
+automatically, but it is also possible to explicitly mark articles for
+download, even if they would not be downloaded automatically. Such
+explicitly-marked articles get the @samp{%} mark in the first column.
+(The variable @code{gnus-downloadable-mark} controls which character to
+use.)
+
+@item
@vindex gnus-not-empty-thread-mark
@vindex gnus-empty-thread-mark
If the @samp{%e} spec is used, the presence of threads or not will be
@item M H
@kindex M H (Summary)
@findex gnus-summary-catchup-to-here
-Catchup the current group to point
+Catchup the current group to point (before the point)
(@code{gnus-summary-catchup-to-here}).
+@item M h
+@kindex M h (Summary)
+@findex gnus-summary-catchup-from-here
+Catchup the current group from point (after the point)
+(@code{gnus-summary-catchup-from-here}).
+
@item C-w
@kindex C-w (Summary)
@findex gnus-summary-mark-region-as-read
Some people would like the command that ticks an article (@kbd{!}) go to
the next article. Others would like it to go to the next unread
article. Yet others would like it to stay on the current article. And
-even though I haven't heard of anybody wanting it to go the the
+even though I haven't heard of anybody wanting it to go to the
previous (unread) article, I'm sure there are people that want that as
well.
-Multiply these five behaviours with five different marking commands, and
+Multiply these five behaviors with five different marking commands, and
you get a potentially complex set of variable to control what each
command should do.
While you can use these commands directly, most users would prefer
altering the summary mode keymap. For instance, if you would like the
-@kbd{!} command to go the the next article instead of the next unread
+@kbd{!} command to go to the next article instead of the next unread
article, you could say something like:
@lisp
@subsection Setting Process Marks
@cindex setting process marks
+Process marks are displayed as @code{#} in the summary buffer, and are
+used for marking articles in such a way that other commands will
+process these articles. For instance, if you process mark four
+articles and then use the @kbd{*} command, Gnus will enter these four
+commands into the cache. For more information,
+@pxref{Process/Prefix}.
+
@table @kbd
@item M P p
Mark articles that have a @code{Subject} header that matches a regular
expression (@code{gnus-uu-mark-by-regexp}).
+@item M P G
+@kindex M P G (Summary)
+@findex gnus-uu-unmark-by-regexp
+Unmark articles that have a @code{Subject} header that matches a regular
+expression (@code{gnus-uu-unmark-by-regexp}).
+
@item M P r
@kindex M P r (Summary)
@findex gnus-uu-mark-region
Mark articles in region (@code{gnus-uu-mark-region}).
+@item M P g
+@kindex M P g
+@findex gnus-uu-unmark-region
+Unmark articles in region (@code{gnus-uu-unmark-region}).
+
@item M P t
@kindex M P t (Summary)
@findex gnus-uu-mark-thread
@end table
+Also see the @kbd{&} command in @pxref{Searching for Articles} for how to
+set process marks based on article body contents.
+
@node Limiting
@section Limiting
@kindex / / (Summary)
@findex gnus-summary-limit-to-subject
Limit the summary buffer to articles that match some subject
-(@code{gnus-summary-limit-to-subject}).
+(@code{gnus-summary-limit-to-subject}). If given a prefix, exclude
+matching articles.
@item / a
@kindex / a (Summary)
@findex gnus-summary-limit-to-author
Limit the summary buffer to articles that match some author
-(@code{gnus-summary-limit-to-author}).
+(@code{gnus-summary-limit-to-author}). If given a prefix, exclude
+matching articles.
@item / x
@kindex / x (Summary)
@findex gnus-summary-limit-to-extra
Limit the summary buffer to articles that match one of the ``extra''
headers (@pxref{To From Newsgroups})
-(@code{gnus-summary-limit-to-author}).
+(@code{gnus-summary-limit-to-extra}). If given a prefix, exclude
+matching articles.
@item / u
@itemx x
@kindex / t (Summary)
@findex gnus-summary-limit-to-age
Ask for a number and then limit the summary buffer to articles older than (or equal to) that number of days
-(@code{gnus-summary-limit-to-marks}). If given a prefix, limit to
+(@code{gnus-summary-limit-to-age}). If given a prefix, limit to
articles younger than that number of days.
@item / n
(@code{gnus-summary-pop-limit}). If given a prefix, pop all limits off
the stack.
+@item / .
+@kindex / . (Summary)
+@findex gnus-summary-limit-to-unseen
+Limit the summary buffer to the unseen articles
+(@code{gnus-summary-limit-to-unseen}).
+
@item / v
@kindex / v (Summary)
@findex gnus-summary-limit-to-score
Limit the summary buffer to articles that have a score at or above some
score (@code{gnus-summary-limit-to-score}).
+@item / p
+@kindex / p (Summary)
+@findex gnus-summary-limit-to-display-predicate
+Limit the summary buffer to articles that satisfy the @code{display}
+group parameter predicate
+(@code{gnus-summary-limit-to-display-predicate}). See @pxref{Group
+Parameters} for more on this predicate.
+
@item / E
@itemx M S
@kindex M S (Summary)
(@code{gnus-summary-limit-mark-excluded-as-read}). If given a prefix,
also mark excluded ticked and dormant articles as read.
+@item / N
+@kindex / N (Summary)
+@findex gnus-summary-insert-new-articles
+Insert all new articles in the summary buffer. It scans for new emails
+if @var{back-end}@code{-get-new-mail} is non-@code{nil}.
+
+@item / o
+@kindex / o (Summary)
+@findex gnus-summary-insert-old-articles
+Insert all old articles in the summary buffer. If given a numbered
+prefix, fetch this number of articles.
+
@end table
Threading is done by looking at the @code{References} headers of the
articles. In a perfect world, this would be enough to build pretty
trees, but unfortunately, the @code{References} header is often broken
-or simply missing. Weird news propagation excarcerbates the problem,
+or simply missing. Weird news propagation exacerbates the problem,
so one has to employ other heuristics to get pleasing results. A
plethora of approaches exists, as detailed in horrible detail in
@pxref{Customizing Threading}.
@menu
-* Customizing Threading:: Variables you can change to affect the threading.
-* Thread Commands:: Thread based commands in the summary buffer.
+* Customizing Threading:: Variables you can change to affect the threading.
+* Thread Commands:: Thread based commands in the summary buffer.
@end menu
@cindex customizing threading
@menu
-* Loose Threads:: How Gnus gathers loose threads into bigger threads.
-* Filling In Threads:: Making the threads displayed look fuller.
-* More Threading:: Even more variables for fiddling with threads.
-* Low-Level Threading:: You thought it was over... but you were wrong!
+* Loose Threads:: How Gnus gathers loose threads into bigger threads.
+* Filling In Threads:: Making the threads displayed look fuller.
+* More Threading:: Even more variables for fiddling with threads.
+* Low-Level Threading:: You thought it was over... but you were wrong!
@end menu
@iftex
@iflatex
\gnusfigure{The Summary Buffer}{390}{
-\put(0,0){\epsfig{figure=tmp/summary-adopt.ps,width=7.5cm}}
-\put(445,0){\makebox(0,0)[br]{\epsfig{figure=tmp/summary-empty.ps,width=7.5cm}}}
-\put(0,400){\makebox(0,0)[tl]{\epsfig{figure=tmp/summary-none.ps,width=7.5cm}}}
-\put(445,400){\makebox(0,0)[tr]{\epsfig{figure=tmp/summary-dummy.ps,width=7.5cm}}}
+\put(0,0){\epsfig{figure=ps/summary-adopt,width=7.5cm}}
+\put(445,0){\makebox(0,0)[br]{\epsfig{figure=ps/summary-empty,width=7.5cm}}}
+\put(0,400){\makebox(0,0)[tl]{\epsfig{figure=ps/summary-none,width=7.5cm}}}
+\put(445,400){\makebox(0,0)[tr]{\epsfig{figure=ps/summary-dummy,width=7.5cm}}}
}
@end iflatex
@end iftex
@item dummy
@vindex gnus-summary-dummy-line-format
+@vindex gnus-summary-make-false-root-always
Gnus will create a dummy summary line that will pretend to be the
parent. This dummy line does not correspond to any real article, so
selecting it will just select the first real article after the dummy
article. @code{gnus-summary-dummy-line-format} is used to specify the
format of the dummy roots. It accepts only one format spec: @samp{S},
which is the subject of the article. @xref{Formatting Variables}.
+If you want all threads to have a dummy root, even the non-gathered
+ones, set @code{gnus-summary-make-false-root-always} to @code{t}.
@item empty
Gnus won't actually make any article the parent, but simply leave the
@item gnus-simplify-whitespace
@findex gnus-simplify-whitespace
Remove excessive whitespace.
+
+@item gnus-simplify-all-whitespace
+@findex gnus-simplify-all-whitespace
+Remove all whitespace.
@end table
You may also write your own functions, of course.
connect as many loose threads as possible, you should set this variable
to @code{some} or a number. If you set it to a number, no more than
that number of extra old headers will be fetched. In either case,
-fetching old headers only works if the backend you are using carries
-overview files---this would normally be @code{nntp}, @code{nnspool} and
-@code{nnml}. Also remember that if the root of the thread has been
-expired by the server, there's not much Gnus can do about that.
+fetching old headers only works if the back end you are using carries
+overview files---this would normally be @code{nntp}, @code{nnspool},
+@code{nnml}, and @code{nnmaildir}. Also remember that if the root of
+the thread has been expired by the server, there's not much Gnus can do
+about that.
This variable can also be set to @code{invisible}. This won't have any
visible effects, but is useful if you use the @kbd{A T} command a lot
off sparse leaf nodes that don't lead anywhere. This variable is
@code{nil} by default.
+@item gnus-read-all-available-headers
+@vindex gnus-read-all-available-headers
+This is a rather obscure variable that few will find useful. It's
+intended for those non-news newsgroups where the back end has to fetch
+quite a lot to present the summary buffer, and where it's impossible to
+go back to parents of articles. This is mostly the case in the
+web-based groups, like the @code{nnultimate} groups.
+
+If you don't use those, then it's safe to leave this as the default
+@code{nil}. If you want to use this variable, it should be a regexp
+that matches the group name, or @code{t} for all groups.
+
@end table
If non-@code{nil}, all threads will be hidden when the summary buffer is
generated.
+This can also be a predicate specifier (@pxref{Predicate Specifiers}).
+Available predicates are @code{gnus-article-unread-p} and
+@code{gnus-article-unseen-p}).
+
+Here's an example:
+
+@lisp
+(setq gnus-thread-hide-subtree
+ '(or gnus-article-unread-p
+ gnus-article-unseen-p))
+@end lisp
+
+(It's a pretty nonsensical example, since all unseen articles are also
+unread, but you get my drift.)
+
+
@item gnus-thread-expunge-below
@vindex gnus-thread-expunge-below
All threads that have a total score (as defined by
@item gnus-thread-ignore-subject
@vindex gnus-thread-ignore-subject
Sometimes somebody changes the subject in the middle of a thread. If
-this variable is non-@code{nil}, the subject change is ignored. If it
-is @code{nil}, which is the default, a change in the subject will result
-in a new thread.
+this variable is non-@code{nil}, which is the default, the subject
+change is ignored. If it is @code{nil}, a change in the subject will
+result in a new thread.
@item gnus-thread-indent-level
@vindex gnus-thread-indent-level
This is a number that says how much each sub-thread should be indented.
The default is 4.
+@item gnus-sort-gathered-threads-function
+@vindex gnus-sort-gathered-threads-function
+Sometimes, particularly with mailing lists, the order in which mails
+arrive locally is not necessarily the same as the order in which they
+arrived on the mailing list. Consequently, when sorting sub-threads
+using the default @code{gnus-thread-sort-by-number}, responses can end
+up appearing before the article to which they are responding to.
+Setting this variable to an alternate value
+(e.g. @code{gnus-thread-sort-by-date}), in a group's parameters or in an
+appropriate hook (e.g. @code{gnus-summary-generate-hook}) can produce a
+more logical sub-thread ordering in such instances.
+
@end table
@table @kbd
@item T k
-@itemx M-C-k
+@itemx C-M-k
@kindex T k (Summary)
-@kindex M-C-k (Summary)
+@kindex C-M-k (Summary)
@findex gnus-summary-kill-thread
Mark all articles in the current (sub-)thread as read
(@code{gnus-summary-kill-thread}). If the prefix argument is positive,
articles instead.
@item T l
-@itemx M-C-l
+@itemx C-M-l
@kindex T l (Summary)
-@kindex M-C-l (Summary)
+@kindex C-M-l (Summary)
@findex gnus-summary-lower-thread
Lower the score of the current (sub-)thread
(@code{gnus-summary-lower-thread}).
@item T n
@kindex T n (Summary)
+@itemx C-M-f
+@kindex C-M-n (Summary)
+@itemx M-down
+@kindex M-down (Summary)
@findex gnus-summary-next-thread
Go to the next thread (@code{gnus-summary-next-thread}).
@item T p
@kindex T p (Summary)
+@itemx C-M-b
+@kindex C-M-p (Summary)
+@itemx M-up
+@kindex M-up (Summary)
@findex gnus-summary-prev-thread
Go to the previous thread (@code{gnus-summary-prev-thread}).
Matching}).
-@node Sorting
-@section Sorting
+@node Sorting the Summary Buffer
+@section Sorting the Summary Buffer
@findex gnus-thread-sort-by-total-score
@findex gnus-thread-sort-by-date
@findex gnus-thread-sort-by-subject
@findex gnus-thread-sort-by-author
@findex gnus-thread-sort-by-number
+@findex gnus-thread-sort-by-random
@vindex gnus-thread-sort-functions
+@findex gnus-thread-sort-by-most-recent-thread
If you are using a threaded summary display, you can sort the threads by
setting @code{gnus-thread-sort-functions}, which can be either a single
function, a list of functions, or a list containing functions and
By default, sorting is done on article numbers. Ready-made sorting
predicate functions include @code{gnus-thread-sort-by-number},
@code{gnus-thread-sort-by-author}, @code{gnus-thread-sort-by-subject},
-@code{gnus-thread-sort-by-date}, @code{gnus-thread-sort-by-score}, and
+@code{gnus-thread-sort-by-date}, @code{gnus-thread-sort-by-score},
+@code{gnus-thread-sort-by-most-recent-number},
+@code{gnus-thread-sort-by-most-recent-date},
+@code{gnus-thread-sort-by-random} and
@code{gnus-thread-sort-by-total-score}.
Each function takes two threads and returns non-@code{nil} if the first
@findex gnus-article-sort-by-score
@findex gnus-article-sort-by-subject
@findex gnus-article-sort-by-author
+@findex gnus-article-sort-by-random
@findex gnus-article-sort-by-number
-If you are using an unthreaded display for some strange reason or other,
-you have to fiddle with the @code{gnus-article-sort-functions} variable.
-It is very similar to the @code{gnus-thread-sort-functions}, except that
-it uses slightly different functions for article comparison. Available
-sorting predicate functions are @code{gnus-article-sort-by-number},
-@code{gnus-article-sort-by-author}, @code{gnus-article-sort-by-subject},
-@code{gnus-article-sort-by-date}, and @code{gnus-article-sort-by-score}.
+If you are using an unthreaded display for some strange reason or
+other, you have to fiddle with the @code{gnus-article-sort-functions}
+variable. It is very similar to the
+@code{gnus-thread-sort-functions}, except that it uses slightly
+different functions for article comparison. Available sorting
+predicate functions are @code{gnus-article-sort-by-number},
+@code{gnus-article-sort-by-author},
+@code{gnus-article-sort-by-subject}, @code{gnus-article-sort-by-date},
+@code{gnus-article-sort-by-random}, and
+@code{gnus-article-sort-by-score}.
If you want to sort an unthreaded summary display by subject, you could
say something like:
@vindex gnus-use-article-prefetch
You can control how many articles are to be pre-fetched by setting
@code{gnus-use-article-prefetch}. This is 30 by default, which means
-that when you read an article in the group, the backend will pre-fetch
-the next 30 articles. If this variable is @code{t}, the backend will
+that when you read an article in the group, the back end will pre-fetch
+the next 30 articles. If this variable is @code{t}, the back end will
pre-fetch all the articles it can without bound. If it is
@code{nil}, no pre-fetching will be done.
To turn caching on, set @code{gnus-use-cache} to @code{t}. By default,
all articles ticked or marked as dormant will then be copied
over to your local cache (@code{gnus-cache-directory}). Whether this
-cache is flat or hierarchal is controlled by the
+cache is flat or hierarchical is controlled by the
@code{gnus-use-long-file-name} variable, as usual.
When re-selecting a ticked or dormant article, it will be fetched from the
To limit the caching, you could set @code{gnus-cacheable-groups} to a
regexp of groups to cache, @samp{^nntp} for instance, or set the
@code{gnus-uncacheable-groups} regexp to @samp{^nnml}, for instance.
-Both variables are @code{nil} by default. If a group matches both
+Both variables are @code{nil} by default. If a group matches both
variables, the group is not cached.
@findex gnus-cache-generate-nov-databases
files, and @kbd{gnus-cache-generate-active} will (re)generate the active
file.
+@findex gnus-cache-move-cache
+@code{gnus-cache-move-cache} will move your whole
+@code{gnus-cache-directory} to some other location. You get asked to
+where, isn't that cool?
@node Persistent Articles
@section Persistent Articles
approach (uudecoding, unsharing) you should use @code{gnus-uu}
(@pxref{Decoding Articles}).
+For the commands listed here, the target is a file. If you want to
+save to a group, see the @kbd{B c} (@code{gnus-summary-copy-article})
+command (@pxref{Mail Group Commands}).
+
@vindex gnus-save-all-headers
If @code{gnus-save-all-headers} is non-@code{nil}, Gnus will not delete
unwanted headers before saving the article.
(@code{gnus-summary-save-article-vm}).
@item O p
+@itemx |
@kindex O p (Summary)
+@kindex | (Summary)
@findex gnus-summary-pipe-output
Save the current article in a pipe. Uhm, like, what I mean is---Pipe
the current article to a process (@code{gnus-summary-pipe-output}).
+If given a symbolic prefix (@pxref{Symbolic Prefixes}), include the
+complete headers in the piped output.
+
+@item O P
+@kindex O P (Summary)
+@findex gnus-summary-muttprint
+@vindex gnus-summary-muttprint-program
+Save the current article into muttprint. That is, print it using the
+external program Muttprint (see
+@uref{http://muttprint.sourceforge.net/}). The program name and
+options to use is controlled by the variable
+@code{gnus-summary-muttprint-program}. (@code{gnus-summary-muttprint}).
+
@end table
@vindex gnus-prompt-before-saving
the @code{gnus-file-save-name} variable to get a file name to save the
article in. The default is @code{gnus-numeric-save-name}.
+@item gnus-summary-write-to-file
+@findex gnus-summary-write-to-file
+Write the article straight to an ordinary file. The file is
+overwritten if it exists. Uses the function in the
+@code{gnus-file-save-name} variable to get a file name to save the
+article in. The default is @code{gnus-numeric-save-name}.
+
@item gnus-summary-save-body-in-file
@findex gnus-summary-save-body-in-file
Append the article body to an ordinary file. Uses the function in the
@item gnus-plain-save-name
@findex gnus-plain-save-name
File names like @file{~/News/alt.andrea-dworkin}.
+
+@item gnus-sender-save-name
+@findex gnus-sender-save-name
+File names like @file{~/News/larsi}.
@end table
@vindex gnus-split-methods
@lisp
(setq gnus-use-long-file-name '(not-save)) ; to get a hierarchy
-(setq gnus-default-article-saver 'gnus-summary-save-in-file) ; no encoding
+(setq gnus-default-article-saver
+ 'gnus-summary-save-in-file) ; no encoding
@end lisp
Then just save with @kbd{o}. You'd then read this hierarchy with
encoded in some way or other. Gnus can decode them for you.
@menu
-* Uuencoded Articles:: Uudecode articles.
-* Shell Archives:: Unshar articles.
-* PostScript Files:: Split PostScript.
-* Other Files:: Plain save and binhex.
-* Decoding Variables:: Variables for a happy decoding.
-* Viewing Files:: You want to look at the result of the decoding?
+* Uuencoded Articles:: Uudecode articles.
+* Shell Archives:: Unshar articles.
+* PostScript Files:: Split PostScript.
+* Other Files:: Plain save and binhex.
+* Decoding Variables:: Variables for a happy decoding.
+* Viewing Files:: You want to look at the result of the decoding?
@end menu
@cindex series
Adjective, not verb.
@menu
-* Rule Variables:: Variables that say how a file is to be viewed.
-* Other Decode Variables:: Other decode variables.
-* Uuencoding and Posting:: Variables for customizing uuencoding.
+* Rule Variables:: Variables that say how a file is to be viewed.
+* Other Decode Variables:: Other decode variables.
+* Uuencoding and Posting:: Variables for customizing uuencoding.
@end menu
Non-@code{nil} means that @code{gnus-uu}, when asked to save without
decoding, will save in digests. If this variable is @code{nil},
@code{gnus-uu} will just save everything in a file without any
-embellishments. The digesting almost conforms to RFC1153---no easy way
+embellishments. The digesting almost conforms to RFC 1153---no easy way
to specify any meaningful volume and issue numbers were found, so I
simply dropped them.
these articles easier.
@menu
-* Article Highlighting:: You want to make the article look like fruit salad.
-* Article Fontisizing:: Making emphasized text look nice.
-* Article Hiding:: You also want to make certain info go away.
-* Article Washing:: Lots of way-neat functions to make life better.
-* Article Buttons:: Click on URLs, Message-IDs, addresses and the like.
-* Article Date:: Grumble, UT!
-* Article Signature:: What is a signature?
-* Article Miscellania:: Various other stuff.
+* Article Highlighting:: You want to make the article look like fruit salad.
+* Article Fontisizing:: Making emphasized text look nice.
+* Article Hiding:: You also want to make certain info go away.
+* Article Washing:: Lots of way-neat functions to make life better.
+* Article Header:: Doing various header transformations.
+* Article Buttons:: Click on URLs, Message-IDs, addresses and the like.
+* Article Date:: Grumble, UT!
+* Article Display:: Display various stuff---X-Face, Picons, Smileys
+* Article Signature:: What is a signature?
+* Article Miscellania:: Various other stuff.
@end menu
@vindex gnus-header-face-alist
Highlight the headers (@code{gnus-article-highlight-headers}). The
highlighting will be done according to the @code{gnus-header-face-alist}
-variable, which is a list where each element has the form @var{(regexp
-name content)}. @var{regexp} is a regular expression for matching the
+variable, which is a list where each element has the form
+@code{(@var{regexp} @var{name} @var{content})}.
+@var{regexp} is a regular expression for matching the
header, @var{name} is the face used for highlighting the header name
(@pxref{Faces and Fonts}) and @var{content} is the face for highlighting
the header value. The first match made will be used. Note that
If the article size if bigger than this variable (which is 25000 by
default), no citation highlighting will be performed.
-@item gnus-cite-prefix-regexp
-@vindex gnus-cite-prefix-regexp
-Regexp matching the longest possible citation prefix on a line.
-
@item gnus-cite-max-prefix
@vindex gnus-cite-max-prefix
Maximum possible length for a citation prefix (default 20).
@findex gnus-article-emphasize
@kindex W e (Summary)
People commonly add emphasis to words in news articles by writing things
-like @samp{_this_} or @samp{*this*}. Gnus can make this look nicer by
-running the article through the @kbd{W e}
+like @samp{_this_} or @samp{*this*} or @samp{/this/}. Gnus can make
+this look nicer by running the article through the @kbd{W e}
(@code{gnus-article-emphasize}) command.
@vindex gnus-emphasis-alist
highlighting.
@lisp
-(setq gnus-article-emphasis
+(setq gnus-emphasis-alist
'(("_\\(\\w+\\)_" 0 1 gnus-emphasis-underline)
("\\*\\(\\w+\\)\\*" 0 1 gnus-emphasis-bold)))
@end lisp
+@cindex slash
+@cindex asterisk
+@cindex underline
+@cindex /
+@cindex *
+
@vindex gnus-emphasis-underline
@vindex gnus-emphasis-bold
@vindex gnus-emphasis-italic
Hide signature (@code{gnus-article-hide-signature}). @xref{Article
Signature}.
+@item W W l
+@kindex W W l (Summary)
+@findex gnus-article-hide-list-identifiers
+@vindex gnus-list-identifiers
+Strip list identifiers specified in @code{gnus-list-identifiers}. These
+are strings some mailing list servers add to the beginning of all
+@code{Subject} headers---for example, @samp{[zebra 4711]}. Any leading
+@samp{Re: } is skipped before stripping. @code{gnus-list-identifiers}
+may not contain @code{\\(..\\)}.
+
+@table @code
+
+@item gnus-list-identifiers
+@vindex gnus-list-identifiers
+A regular expression that matches list identifiers to be removed from
+subject. This can also be a list of regular expressions.
+
+@end table
+
@item W W p
@kindex W W p (Summary)
@findex gnus-article-hide-pgp
@item W W B
@kindex W W B (Summary)
@findex gnus-article-strip-banner
+@vindex gnus-article-banner-alist
+@vindex gnus-article-address-banner-alist
+@cindex banner
+@cindex OneList
+@cindex stripping advertisements
+@cindex advertisements
Strip the banner specified by the @code{banner} group parameter
(@code{gnus-article-strip-banner}). This is mainly used to hide those
annoying banners and/or signatures that some mailing lists and moderated
group you want banners stripped from. The parameter either be a string,
which will be interpreted as a regular expression matching text to be
removed, or the symbol @code{signature}, meaning that the (last)
-signature should be removed.
+signature should be removed, or other symbol, meaning that the
+corresponding regular expression in @code{gnus-article-banner-alist} is
+used.
+
+Regardless of a group, you can hide things like advertisements only when
+the sender of an article has a certain mail address specified in
+@code{gnus-article-address-banner-alist}.
+
+@table @code
+
+@item gnus-article-address-banner-alist
+@vindex gnus-article-address-banner-alist
+Alist of mail addresses and banners. Each element has the form
+@code{(ADDRESS . BANNER)}, where ADDRESS is a regexp matching a mail
+address in the From header, BANNER is one of a symbol @code{signature},
+an item in @code{gnus-article-banner-alist}, a regexp and @code{nil}.
+If ADDRESS matches author's mail address, it will remove things like
+advertisements. For example, if a sender has the mail address
+@samp{hail@@yoo-hoo.co.jp} and there is a banner something like
+@samp{Do You Yoo-hoo!?} in all articles he sends, you can use the
+following element to remove them:
+
+@lisp
+("@@yoo-hoo\\.co\\.jp\\'" . "\n_+\nDo You Yoo-hoo!\\?\n.*\n.*\n")
+@end lisp
+
+@end table
@item W W c
@kindex W W c (Summary)
@item gnus-cited-lines-visible
@vindex gnus-cited-lines-visible
-The number of lines at the beginning of the cited text to leave shown.
+The number of lines at the beginning of the cited text to leave
+shown. This can also be a cons cell with the number of lines at the top
+and bottom of the text, respectively, to remain visible.
@end table
something else'', but normally results in something looking better.
Cleaner, perhaps.
+@xref{Customizing Articles}, if you want to change how Gnus displays
+articles by default.
+
@table @kbd
+@item C-u g
+This is not really washing, it's sort of the opposite of washing. If
+you type this, you see the article exactly as it exists on disk or on
+the server.
+
@item W l
@kindex W l (Summary)
@findex gnus-summary-stop-page-breaking
#15). It is sometimes referred to as ``Caesar rotate'' because Caesar
is rumored to have employed this form of, uh, somewhat weak encryption.
+@item W m
+@kindex W m (Summary)
+@findex gnus-summary-morse-message
+@c @icon{gnus-summary-morse-message}
+Morse decode the article buffer (@code{gnus-summary-morse-message}).
+
@item W t
+@item t
@kindex W t (Summary)
+@kindex t (Summary)
@findex gnus-summary-toggle-header
Toggle whether to display all headers in the article buffer
(@code{gnus-summary-toggle-header}).
@item W v
@kindex W v (Summary)
-@findex gnus-summary-verbose-header
+@findex gnus-summary-verbose-headers
Toggle whether to display all headers in the article buffer permanently
-(@code{gnus-summary-verbose-header}).
+(@code{gnus-summary-verbose-headers}).
@item W o
@kindex W o (Summary)
@findex gnus-article-treat-dumbquotes
@vindex gnus-article-dumbquotes-map
@cindex Smartquotes
-@cindex M******** sm*rtq**t*s
+@cindex M****s*** sm*rtq**t*s
@cindex Latin 1
-Treat M******** sm*rtq**t*s according to
+Treat M****s*** sm*rtq**t*s according to
@code{gnus-article-dumbquotes-map}
(@code{gnus-article-treat-dumbquotes}). Note that this function guesses
whether a character is a sm*rtq**t* or not, so it should only be used
interactively.
+Sm*rtq**t*s are M****s***'s unilateral extension to the character map in
+an attempt to provide more quoting characters. If you see something
+like @code{\222} or @code{\264} where you're expecting some kind of
+apostrophe or quotation mark, then try this wash.
+
+@item W Y f
+@kindex W Y f (Summary)
+@findex gnus-article-outlook-deuglify-article
+@cindex Outlook Express
+Full deuglify of broken Outlook (Express) articles: Treat dumbquotes,
+unwrap lines, repair attribution and rearrange citation.
+(@code{gnus-article-outlook-deuglify-article}).
+
+@item W Y u
+@kindex W Y u (Summary)
+@findex gnus-article-outlook-unwrap-lines
+Unwrap lines that appear to be wrapped citation lines. You can control
+what lines will be unwrapped by frobbing
+@code{gnus-outlook-deuglify-unwrap-min} and
+@code{gnus-outlook-deuglify-unwrap-max}, indicating the miminum and
+maximum length of an unwrapped citation line.
+(@code{gnus-outlook-deuglify-article}).
+
+@item W Y a
+@kindex W Y a (Summary)
+@findex gnus-article-outlook-repair-attribution
+Repair a broken attribution line.
+(@code{gnus-article-outlook-repair-attribution}).
+
+@item W Y c
+@kindex W Y c (Summary)
+@findex gnus-article-outlook-rearrange-citation
+Repair broken citations by rearranging the text.
+(@code{gnus-article-outlook-rearrange-citation}).
+
@item W w
@kindex W w (Summary)
@findex gnus-article-fill-cited-article
You can give the command a numerical prefix to specify the width to use
when filling.
-@item W q
-@kindex W q (Summary)
+@item W Q
+@kindex W Q (Summary)
@findex gnus-article-fill-long-lines
Fill long lines (@code{gnus-article-fill-long-lines}).
@item W C
@kindex W C (Summary)
-@findex gnus-article-capitalize-sentencse
+@findex gnus-article-capitalize-sentences
Capitalize the first word in each sentence
(@code{gnus-article-capitalize-sentences}).
Quoted-Printable is one common @sc{mime} encoding employed when sending
non-ASCII (i. e., 8-bit) articles. It typically makes strings like
@samp{déjà vu} look like @samp{d=E9j=E0 vu}, which doesn't look very
-readable to me. Note that the this is usually done automatically by
+readable to me. Note that this is usually done automatically by
Gnus if the message in question has a @code{Content-Transfer-Encoding}
header that says that this encoding has been done.
+If a prefix is given, a charset will be asked for.
+
+@item W 6
+@kindex W 6 (Summary)
+@findex gnus-article-de-base64-unreadable
+Treat base64 (@code{gnus-article-de-base64-unreadable}).
+Base64 is one common @sc{mime} encoding employed when sending non-ASCII
+(i. e., 8-bit) articles. Note that this is usually done
+automatically by Gnus if the message in question has a
+@code{Content-Transfer-Encoding} header that says that this encoding has
+been done.
+If a prefix is given, a charset will be asked for.
+
+@item W Z
+@kindex W Z (Summary)
+@findex gnus-article-decode-HZ
+Treat HZ or HZP (@code{gnus-article-decode-HZ}). HZ (or HZP) is one
+common encoding employed when sending Chinese articles. It typically
+makes strings look like @samp{~@{<:Ky2;S@{#,NpJ)l6HK!#~@}}.
+
+@item W u
+@kindex W u (Summary)
+@findex gnus-article-unsplit-urls
+Remove newlines from within URLs. Some mailers insert newlines into
+outgoing email messages to keep lines short. This reformatting can
+split long URLs onto multiple lines. Repair those URLs by removing
+the newlines (@code{gnus-article-unsplit-urls}).
+
+@item W h
+@kindex W h (Summary)
+@findex gnus-article-wash-html
+Treat @sc{html} (@code{gnus-article-wash-html}). Note that this is
+usually done automatically by Gnus if the message in question has a
+@code{Content-Type} header that says that the message is @sc{html}.
+
+If a prefix is given, a charset will be asked for.
+
+@vindex gnus-article-wash-function
+The default is to use the function specified by
+@code{mm-text-html-renderer} (@pxref{(emacs-mime)Display
+Customization}) to convert the @sc{html}, but this is controlled by
+the @code{gnus-article-wash-function} variable. Pre-defined functions
+you can use include:
-@item W f
-@kindex W f (Summary)
-@cindex x-face
-@findex gnus-article-display-x-face
-@findex gnus-article-x-face-command
-@vindex gnus-article-x-face-command
-@vindex gnus-article-x-face-too-ugly
-@iftex
-@iflatex
-\include{xface}
-@end iflatex
-@end iftex
-Look for and display any X-Face headers
-(@code{gnus-article-display-x-face}). The command executed by this
-function is given by the @code{gnus-article-x-face-command} variable.
-If this variable is a string, this string will be executed in a
-sub-shell. If it is a function, this function will be called with the
-face as the argument. If the @code{gnus-article-x-face-too-ugly} (which
-is a regexp) matches the @code{From} header, the face will not be shown.
-The default action under Emacs is to fork off an @code{xv} to view the
-face; under XEmacs the default action is to display the face before the
-@code{From} header. (It's nicer if XEmacs has been compiled with X-Face
-support---that will make display somewhat faster. If there's no native
-X-Face support, Gnus will try to convert the @code{X-Face} header using
-external programs from the @code{pbmplus} package and friends.) If you
-want to have this function in the display hook, it should probably come
-last.
+@table @code
+@item w3
+Use Emacs/w3.
+
+@item w3m
+Use emacs-w3m (see @uref{http://emacs-w3m.namazu.org/} for more
+information).
+
+@item links
+Use Links (see @uref{http://artax.karlin.mff.cuni.cz/~mikulas/links/}).
+
+@item lynx
+Use Lynx (see @uref{http://lynx.browser.org/}).
+
+@item html2text
+Use html2text -- a simple @sc{html} converter included with Gnus.
+
+@end table
@item W b
@kindex W b (Summary)
Add clickable buttons to the article headers
(@code{gnus-article-add-buttons-to-head}).
-@item W W H
-@kindex W W H (Summary)
-@findex gnus-article-strip-headers-from-body
+@item W p
+@kindex W p (Summary)
+@findex gnus-article-verify-x-pgp-sig
+Verify a signed control message (@code{gnus-article-verify-x-pgp-sig}).
+Control messages such as @code{newgroup} and @code{checkgroups} are
+usually signed by the hierarchy maintainer. You need to add the PGP
+public key of the maintainer to your keyring to verify the
+message.@footnote{PGP keys for many hierarchies are available at
+@uref{ftp://ftp.isc.org/pub/pgpcontrol/README.html}}
+
+@item W s
+@kindex W s (Summary)
+@findex gnus-summary-force-verify-and-decrypt
+Verify a signed (PGP, @sc{pgp/mime} or @sc{s/mime}) message
+(@code{gnus-summary-force-verify-and-decrypt}). @xref{Security}.
+
+@item W a
+@kindex W a (Summary)
+@findex gnus-article-strip-headers-in-body
Strip headers like the @code{X-No-Archive} header from the beginning of
-article bodies (@code{gnus-article-strip-headers-from-body}).
+article bodies (@code{gnus-article-strip-headers-in-body}).
@item W E l
@kindex W E l (Summary)
@xref{Customizing Articles}, for how to wash articles automatically.
+@node Article Header
+@subsection Article Header
+
+These commands perform various transformations of article header.
+
+@table @kbd
+
+@item W G u
+@kindex W G u (Summary)
+@findex gnus-article-treat-unfold-headers
+Unfold folded header lines (@code{gnus-article-treat-unfold-headers}).
+
+@item W G n
+@kindex W G n (Summary)
+@findex gnus-article-treat-fold-newsgroups
+Fold the @code{Newsgroups} and @code{Followup-To} headers
+(@code{gnus-article-treat-fold-newsgroups}).
+
+@item W G f
+@kindex W G f (Summary)
+@findex gnus-article-treat-fold-headers
+Fold all the message headers
+(@code{gnus-article-treat-fold-headers}).
+
+@item W E w
+@kindex W E w
+@findex gnus-article-remove-leading-whitespace
+Remove excessive whitespace from all headers
+(@code{gnus-article-remove-leading-whitespace}).
+
+@end table
+
+
@node Article Buttons
@subsection Article Buttons
@cindex buttons
with the minimum of fuzz when you hit @kbd{RET} or use the middle mouse
button on these references.
+@vindex gnus-button-man-handler
Gnus adds @dfn{buttons} to certain standard references by default:
-Well-formed URLs, mail addresses and Message-IDs. This is controlled by
-two variables, one that handles article bodies and one that handles
-article heads:
+Well-formed URLs, mail addresses, Message-IDs, Info links and man pages.
+This is controlled by two variables, one that handles article bodies and
+one that handles article heads:
@table @code
@table @var
@item regexp
-All text that match this regular expression will be considered an
-external reference. Here's a typical regexp that matches embedded URLs:
-@samp{<URL:\\([^\n\r>]*\\)>}.
+All text that match this regular expression (case insensitive) will be
+considered an external reference. Here's a typical regexp that matches
+embedded URLs: @samp{<URL:\\([^\n\r>]*\\)>}. This can also be a
+variable containing a regexp, useful variables to use include
+@code{gnus-button-url-regexp}.
@item button-par
Gnus has to know which parts of the matches is to be highlighted. This
(HEADER REGEXP BUTTON-PAR USE-P FUNCTION DATA-PAR)
@end lisp
-@var{HEADER} is a regular expression.
+@var{header} is a regular expression.
@item gnus-button-url-regexp
@vindex gnus-button-url-regexp
@findex gnus-article-date-local
Display the date in the local timezone (@code{gnus-article-date-local}).
+@item W T p
+@kindex W T p (Summary)
+@findex gnus-article-date-english
+Display the date in a format that's easily pronounceable in English
+(@code{gnus-article-date-english}).
+
@item W T s
@kindex W T s (Summary)
@vindex gnus-article-time-format
(@code{gnus-article-date-lapsed}). It looks something like:
@example
-X-Sent: 9 years, 6 weeks, 4 days, 9 hours, 3 minutes, 28 seconds ago
+X-Sent: 6 weeks, 4 days, 1 hour, 3 minutes, 8 seconds ago
@end example
The value of @code{gnus-article-date-lapsed-new-header} determines
preferred format automatically.
+@node Article Display
+@subsection Article Display
+@cindex picons
+@cindex x-face
+@cindex smileys
+
+These commands add various frivolous display gimmicks to the article
+buffer in Emacs versions that support them.
+
+@code{X-Face} headers are small black-and-white images supplied by the
+message headers (@pxref{X-Face}).
+
+Picons, on the other hand, reside on your own system, and Gnus will
+try to match the headers to what you have (@pxref{Picons}).
+
+Smileys are those little @samp{:-)} symbols that people like to litter
+their messages with (@pxref{Smileys}).
+
+All these functions are toggles--if the elements already exist,
+they'll be removed.
+
+@table @kbd
+@item W D x
+@kindex W D x (Summary)
+@findex gnus-article-display-x-face
+Display an @code{X-Face} in the @code{From} header.
+(@code{gnus-article-display-x-face}).
+
+@item W D d
+@kindex W D d (Summary)
+@findex gnus-article-display-face
+Display a @code{Face} in the @code{From} header.
+(@code{gnus-article-display-face}).
+
+@item W D s
+@kindex W D s (Summary)
+@findex gnus-treat-smiley
+Display smileys (@code{gnus-treat-smiley}).
+
+@item W D f
+@kindex W D f (Summary)
+@findex gnus-treat-from-picon
+Piconify the @code{From} header (@code{gnus-treat-from-picon}).
+
+@item W D m
+@kindex W D m (Summary)
+@findex gnus-treat-mail-picon
+Piconify all mail headers (i. e., @code{Cc}, @code{To})
+(@code{gnus-treat-mail-picon}).
+
+@item W D n
+@kindex W D n (Summary)
+@findex gnus-treat-newsgroups-picon
+Piconify all news headers (i. e., @code{Newsgroups} and
+@code{Followup-To}) (@code{gnus-treat-newsgroups-picon}).
+
+@item W D D
+@kindex W D D (Summary)
+@findex gnus-article-remove-images
+Remove all images from the article buffer
+(@code{gnus-article-remove-images}).
+
+@end table
+
+
+
@node Article Signature
@subsection Article Signature
@cindex signatures
@vindex gnus-signature-limit
@code{gnus-signature-limit} provides a limit to what is considered a
-signature.
+signature when displaying articles.
@enumerate
@item
@kindex A t (Summary)
@findex gnus-article-babel
Translate the article from one language to another
-(@code{gnus-article-babel}).
+(@code{gnus-article-babel}).
@end table
@node MIME Commands
-@section @sc{mime} Commands
+@section MIME Commands
@cindex MIME decoding
+@cindex attachments
+@cindex viewing attachments
+
+The following commands all understand the numerical prefix. For
+instance, @kbd{3 b} means ``view the third @sc{mime} part''.
+
+@table @kbd
+@item b
+@itemx K v
+@kindex b (Summary)
+@kindex K v (Summary)
+View the @sc{mime} part.
+
+@item K o
+@kindex K o (Summary)
+Save the @sc{mime} part.
+
+@item K c
+@kindex K c (Summary)
+Copy the @sc{mime} part.
+
+@item K e
+@kindex K e (Summary)
+View the @sc{mime} part externally.
+
+@item K i
+@kindex K i (Summary)
+View the @sc{mime} part internally.
+
+@item K |
+@kindex K | (Summary)
+Pipe the @sc{mime} part to an external command.
+@end table
+
+The rest of these @sc{mime} commands do not use the numerical prefix in
+the same manner:
@table @kbd
+@item K b
+@kindex K b (Summary)
+Make all the @sc{mime} parts have buttons in front of them. This is
+mostly useful if you wish to save (or perform other actions) on inlined
+parts.
+
+@item K m
+@kindex K m (Summary)
+@findex gnus-summary-repair-multipart
+Some multipart messages are transmitted with missing or faulty headers.
+This command will attempt to ``repair'' these messages so that they can
+be viewed in a more pleasant manner
+(@code{gnus-summary-repair-multipart}).
+
@item X m
@kindex X m (Summary)
@findex gnus-summary-save-parts
@item M-t
@kindex M-t (Summary)
-@findex gnus-summary-display-buttonized
+@findex gnus-summary-toggle-display-buttonized
Toggle the buttonized display of the article buffer
(@code{gnus-summary-toggle-display-buttonized}).
@item W M w
@kindex W M w (Summary)
-Decode RFC2047-encoded words in the article headers
+@findex gnus-article-decode-mime-words
+Decode RFC 2047-encoded words in the article headers
(@code{gnus-article-decode-mime-words}).
@item W M c
@kindex W M c (Summary)
+@findex gnus-article-decode-charset
Decode encoded article bodies as well as charsets
(@code{gnus-article-decode-charset}).
This command looks in the @code{Content-Type} header to determine the
charset. If there is no such header in the article, you can give it a
prefix, which will prompt for the charset to decode as. In regional
-groups where people post using some common encoding (but do not include
-MIME headers), you can set the @code{charset} group/topic parameter to
-the required charset (@pxref{Group Parameters}).
+groups where people post using some common encoding (but do not
+include @sc{mime} headers), you can set the @code{charset} group/topic
+parameter to the required charset (@pxref{Group Parameters}).
@item W M v
@kindex W M v (Summary)
+@findex gnus-mime-view-all-parts
View all the @sc{mime} parts in the current article
(@code{gnus-mime-view-all-parts}).
'("text/x-vcard"))
@end lisp
+@item gnus-article-loose-mime
+@vindex gnus-article-loose-mime
+If non-@code{nil}, Gnus won't required the @samp{MIME-Version} header
+before interpreting the message as a @sc{mime} message. This helps
+when reading messages from certain broken mail user agents. The
+default is @code{nil}.
+
+@item gnus-article-emulate-mime
+@vindex gnus-article-emulate-mime
+There are other, non-@sc{mime} encoding methods used. The most common
+is @samp{uuencode}, but yEncode is also getting to be popular. If
+This variable is non-@code{nil}, Gnus will look in message bodies to
+see if it finds these encodings, and if so, it'll run them through the
+Gnus @sc{mime} machinery. The default is @code{t}.
+
@item gnus-unbuttonized-mime-types
@vindex gnus-unbuttonized-mime-types
This is a list of regexps. @sc{mime} types that match a regexp from
this list won't have @sc{mime} buttons inserted unless they aren't
-displayed. The default value is @code{(".*/.*")}.
+displayed or this variable is overridden by
+@code{gnus-buttonized-mime-types}. The default value is
+@code{(".*/.*")}. This variable is only used when
+@code{gnus-inhibit-mime-unbuttonizing} is nil.
+
+@item gnus-buttonized-mime-types
+@vindex gnus-buttonized-mime-types
+This is a list of regexps. @sc{mime} types that match a regexp from
+this list will have @sc{mime} buttons inserted unless they aren't
+displayed. This variable overrides
+@code{gnus-unbuttonized-mime-types}. The default value is @code{nil}.
+This variable is only used when @code{gnus-inhibit-mime-unbuttonizing}
+is nil.
+
+To see e.g. security buttons but no other buttons, you could set this
+variable to @code{("multipart/signed")} and leave
+@code{gnus-unbuttonized-mime-types} at the default value.
+
+@item gnus-inhibit-mime-unbuttonizing
+@vindex gnus-inhibit-mime-unbuttonizing
+If this is non-nil, then all @sc{mime} parts get buttons. The default
+value is @code{nil}.
@item gnus-article-mime-part-function
@vindex gnus-article-mime-part-function
@item gnus-mime-multipart-functions
Alist of @sc{mime} multipart types and functions to handle them.
+@vindex mm-file-name-rewrite-functions
+@item mm-file-name-rewrite-functions
+List of functions used for rewriting file names of @sc{mime} parts.
+Each function takes a file name as input and returns a file name.
+
+Ready-made functions include@*
+@code{mm-file-name-delete-whitespace},
+@code{mm-file-name-trim-whitespace},
+@code{mm-file-name-collapse-whitespace}, and
+@code{mm-file-name-replace-whitespace}. The later uses the value of
+the variable @code{mm-file-name-replace-whitespace} to replace each
+whitespace character in a file name with that string; default value
+is @code{"_"} (a single underscore).
+@findex mm-file-name-delete-whitespace
+@findex mm-file-name-trim-whitespace
+@findex mm-file-name-collapse-whitespace
+@findex mm-file-name-replace-whitespace
+@vindex mm-file-name-replace-whitespace
+
+The standard functions @code{capitalize}, @code{downcase},
+@code{upcase}, and @code{upcase-initials} may be useful, too.
+
+Everybody knows that whitespace characters in file names are evil,
+except those who don't know. If you receive lots of attachments from
+such unenlightened users, you can make live easier by adding
+
+@lisp
+(setq mm-file-name-rewrite-functions
+ '(mm-file-name-trim-whitespace
+ mm-file-name-collapse-whitespace
+ mm-file-name-replace-whitespace))
+@end lisp
+
+@noindent
+to your @file{.gnus.el} file.
+
@end table
@vindex gnus-group-charset-alist
This knowledge is encoded in the @code{gnus-group-charset-alist}
-variable, which is an alist of regexps (to match group names) and
-default charsets to be used when reading these groups.
+variable, which is an alist of regexps (use the first item to match full
+group names) and default charsets to be used when reading these groups.
In addition, some people do use soi-disant @sc{mime}-aware agents that
-aren't. These blitely mark messages as being in @code{iso-8859-1} even
-if they really are in @code{koi-8}. To help here, the
+aren't. These blithely mark messages as being in @code{iso-8859-1}
+even if they really are in @code{koi-8}. To help here, the
@code{gnus-newsgroup-ignored-charsets} variable can be used. The
-charsets that are listed here will be ignored. The variable can be set
-on a group-by-group basis using the group parameters (@pxref{Group
-Parameters}). The default value is @code{(unknown-8bit)}, which is
-something some agents insist on having in there.
+charsets that are listed here will be ignored. The variable can be
+set on a group-by-group basis using the group parameters (@pxref{Group
+Parameters}). The default value is @code{(unknown-8bit x-unknown)},
+which includes values some agents insist on having in there.
+
+@vindex gnus-group-posting-charset-alist
+When posting, @code{gnus-group-posting-charset-alist} is used to
+determine which charsets should not be encoded using the @sc{mime}
+encodings. For instance, some hierarchies discourage using
+quoted-printable header encoding.
+
+This variable is an alist of regexps and permitted unencoded charsets
+for posting. Each element of the alist has the form @code{(}@var{test
+header body-list}@code{)}, where:
+
+@table @var
+@item test
+is either a regular expression matching the newsgroup header or a
+variable to query,
+@item header
+is the charset which may be left unencoded in the header (@code{nil}
+means encode all charsets),
+@item body-list
+is a list of charsets which may be encoded using 8bit content-transfer
+encoding in the body, or one of the special values @code{nil} (always
+encode using quoted-printable) or @code{t} (always use 8bit).
+@end table
+
+@cindex Russian
+@cindex koi8-r
+@cindex koi8-u
+@cindex iso-8859-5
+@cindex coding system aliases
+@cindex preferred charset
+
+Other charset tricks that may be useful, although not Gnus-specific:
+
+If there are several @sc{mime} charsets that encode the same Emacs
+charset, you can choose what charset to use by saying the following:
+
+@lisp
+(put-charset-property 'cyrillic-iso8859-5
+ 'preferred-coding-system 'koi8-r)
+@end lisp
+
+This means that Russian will be encoded using @code{koi8-r} instead of
+the default @code{iso-8859-5} @sc{mime} charset.
+
+If you want to read messages in @code{koi8-u}, you can cheat and say
+
+@lisp
+(define-coding-system-alias 'koi8-u 'koi8-r)
+@end lisp
+
+This will almost do the right thing.
+
+And finally, to read charsets like @code{windows-1251}, you can say
+something like
+
+@lisp
+(codepage-setup 1251)
+(define-coding-system-alias 'windows-1251 'cp1251)
+@end lisp
@node Article Commands
@vindex gnus-ps-print-hook
@findex gnus-summary-print-article
Generate and print a PostScript image of the article buffer
-(@code{gnus-summary-print-article}). @code{gnus-ps-print-hook} will be
-run just before printing the buffer.
+(@code{gnus-summary-print-article}). @code{gnus-ps-print-hook} will
+be run just before printing the buffer. An alternative way to print
+article is to use Muttprint (@pxref{Saving Articles}).
@end table
@kindex C-c C-s C-i (Summary)
@findex gnus-summary-sort-by-score
Sort by score (@code{gnus-summary-sort-by-score}).
+
+@item C-c C-s C-r
+@kindex C-c C-s C-r (Summary)
+@findex gnus-summary-sort-by-random
+Randomize (@code{gnus-summary-sort-by-random}).
+
+@item C-c C-s C-o
+@kindex C-c C-s C-o (Summary)
+@findex gnus-summary-sort-by-original
+Sort using the default sorting method
+(@code{gnus-summary-sort-by-original}).
@end table
These functions will work both when you use threading and when you don't
by giving this command a prefix.
@vindex gnus-refer-article-method
-If the group you are reading is located on a backend that does not
+If the group you are reading is located on a back end that does not
support fetching by @code{Message-ID} very well (like @code{nnspool}),
you can set @code{gnus-refer-article-method} to an @sc{nntp} method. It
would, perhaps, be best if the @sc{nntp} server you consult is the one
updating the spool you are reading from, but that's not really
necessary.
-Most of the mail backends support fetching by @code{Message-ID}, but do
-not do a particularly excellent job at it. That is, @code{nnmbox} and
-@code{nnbabyl} are able to locate articles from any groups, while
-@code{nnml} and @code{nnfolder} are only able to locate articles that
-have been posted to the current group. (Anything else would be too time
-consuming.) @code{nnmh} does not support this at all.
+It can also be a list of select methods, as well as the special symbol
+@code{current}, which means to use the current select method. If it
+is a list, Gnus will try all the methods in the list until it finds a
+match.
+
+Here's an example setting that will first try the current method, and
+then ask Google if that fails:
+
+@lisp
+(setq gnus-refer-article-method
+ '(current
+ (nnweb "google" (nnweb-type google))))
+@end lisp
+
+Most of the mail back ends support fetching by @code{Message-ID}, but
+do not do a particularly excellent job at it. That is, @code{nnmbox},
+@code{nnbabyl}, and @code{nnmaildir} are able to locate articles from
+any groups, while @code{nnml}, @code{nnfolder}, and @code{nnimap} are
+only able to locate articles that have been posted to the current group.
+(Anything else would be too time consuming.) @code{nnmh} does not
+support this at all.
@node Alternative Approaches
(@code{gnus-pick-article-or-thread}). If the variable
@code{gnus-thread-hide-subtree} is true, then this key selects the
entire thread when used at the first article of the thread. Otherwise,
-it selects just the article. If given a numerical prefix, go to that
+it selects just the article. If given a numerical prefix, go to that
thread or article and pick it. (The line number is normally displayed
at the beginning of the summary pick lines.)
@item gnus-tree-brackets
@vindex gnus-tree-brackets
This is used for differentiating between ``real'' articles and
-``sparse'' articles. The format is @var{((real-open . real-close)
-(sparse-open . sparse-close) (dummy-open . dummy-close))}, and the
+``sparse'' articles. The format is @code{((@var{real-open} . @var{real-close})
+(@var{sparse-open} . @var{sparse-close}) (@var{dummy-open} . @var{dummy-close}))}, and the
default is @code{((?[ . ?]) (?( . ?)) (?@{ . ?@}) (?< . ?>))}.
@item gnus-tree-parent-child-edges
buffer is one of these, minimizing the tree window will also resize all
other windows displayed next to it.
+You may also wish to add the following hook to keep the window minimized
+at all times:
+
+@lisp
+(add-hook 'gnus-configure-windows-hook
+ 'gnus-tree-perhaps-minimize)
+@end lisp
+
@item gnus-generate-tree-function
@vindex gnus-generate-tree-function
@findex gnus-generate-horizontal-tree
(article 1.0))))
@end lisp
-@xref{Windows Configuration}.
+@xref{Window Layout}.
@node Mail Group Commands
@item B e
@kindex B e (Summary)
@findex gnus-summary-expire-articles
-Expire all expirable articles in the group
-(@code{gnus-summary-expire-articles}).
+Run all expirable articles in the current group through the expiry
+process (@code{gnus-summary-expire-articles}). That is, delete all
+expirable articles in the group that have been around for a while.
+(@pxref{Expiring Mail}).
-@item B M-C-e
-@kindex B M-C-e (Summary)
+@item B C-M-e
+@kindex B C-M-e (Summary)
@findex gnus-summary-expire-articles-now
Delete all the expirable articles in the group
(@code{gnus-summary-expire-articles-now}). This means that @strong{all}
@kindex B m (Summary)
@cindex move mail
@findex gnus-summary-move-article
+@vindex gnus-preserve-marks
Move the article from one mail group to another
-(@code{gnus-summary-move-article}).
+(@code{gnus-summary-move-article}). Marks will be preserved if
+@code{gnus-preserve-marks} is non-@code{nil} (which is the default).
@item B c
@kindex B c (Summary)
@findex gnus-summary-copy-article
@c @icon{gnus-summary-mail-copy}
Copy the article from one group (mail group or not) to a mail group
-(@code{gnus-summary-copy-article}).
+(@code{gnus-summary-copy-article}). Marks will be preserved if
+@code{gnus-preserve-marks} is non-@code{nil} (which is the default).
@item B B
@kindex B B (Summary)
(@code{gnus-summary-import-article}). You will be prompted for a file
name, a @code{From} header and a @code{Subject} header.
+@item B I
+@kindex B I (Summary)
+@findex gnus-summary-create-article
+Create an empty article in the current mail newsgroups
+(@code{gnus-summary-create-article}). You will be prompted for a
+@code{From} header and a @code{Subject} header.
+
@item B r
@kindex B r (Summary)
@findex gnus-summary-respool-article
@code{gnus-summary-respool-default-method} will be used as the default
select method when respooling. This variable is @code{nil} by default,
which means that the current group select method will be used instead.
+Marks will be preserved if @code{gnus-preserve-marks} is non-@code{nil}
+(which is the default).
@item B w
@itemx e
@kindex e (Summary)
@findex gnus-summary-edit-article
@kindex C-c C-c (Article)
+@findex gnus-summary-edit-article-done
Edit the current article (@code{gnus-summary-edit-article}). To finish
editing and make the changes permanent, type @kbd{C-c C-c}
-(@kbd{gnus-summary-edit-article-done}). If you give a prefix to the
+(@code{gnus-summary-edit-article-done}). If you give a prefix to the
@kbd{C-c C-c} command, Gnus won't re-highlight the article.
@item B q
@kindex B t (Summary)
@findex gnus-summary-respool-trace
Similarly, this command will display all fancy splitting patterns used
-when repooling, if any (@code{gnus-summary-respool-trace}).
+when respooling, if any (@code{gnus-summary-respool-trace}).
@item B p
@kindex B p (Summary)
propagation is much faster than news propagation, and the news copy may
just not have arrived yet.
+@item K E
+@kindex K E (Summary)
+@findex gnus-article-encrypt-body
+@vindex gnus-article-encrypt-protocol
+Encrypt the body of an article (@code{gnus-article-encrypt-body}).
+The body is encrypted with the encryption protocol specified by the
+variable @code{gnus-article-encrypt-protocol}.
+
@end table
@vindex gnus-move-split-methods
suggest where to put the articles. @code{gnus-move-split-methods} is a
variable that uses the same syntax as @code{gnus-split-methods}
(@pxref{Saving Articles}). You may customize that variable to create
-suggestions you find reasonable.
+suggestions you find reasonable. (Note that
+@code{gnus-move-split-methods} uses group names where
+@code{gnus-split-methods} uses file names.)
@lisp
(setq gnus-move-split-methods
@section Various Summary Stuff
@menu
-* Summary Group Information:: Information oriented commands.
-* Searching for Articles:: Multiple article commands.
-* Summary Generation Commands:: (Re)generating the summary buffer.
-* Really Various Summary Commands:: Those pesky non-conformant commands.
+* Summary Group Information:: Information oriented commands.
+* Searching for Articles:: Multiple article commands.
+* Summary Generation Commands::
+* Really Various Summary Commands:: Those pesky non-conformant commands.
@end menu
@table @code
+@vindex gnus-summary-display-while-building
+@item gnus-summary-display-while-building
+If non-@code{nil}, show and update the summary buffer as it's being
+built. If @code{t}, update the buffer after every line is inserted.
+If the value is an integer, @var{n}, update the display every @var{n}
+lines. The default is @code{nil}.
+
@vindex gnus-summary-mode-hook
@item gnus-summary-mode-hook
This hook is called when creating a summary mode buffer.
any other article. If this variable is @code{t}, it won't display the
article---it'll be as if it never existed.
+@vindex gnus-alter-articles-to-read-function
+@item gnus-alter-articles-to-read-function
+This function, which takes two parameters (the group name and the list
+of articles to be selected), is called to allow the user to alter the
+list of articles to be selected.
+
+For instance, the following function adds the list of cached articles to
+the list in one particular group:
+
+@lisp
+(defun my-add-cached-articles (group articles)
+ (if (string= group "some.group")
+ (append gnus-newsgroup-cached articles)
+ articles))
+@end lisp
+
+@vindex gnus-newsgroup-variables
+@item gnus-newsgroup-variables
+A list of newsgroup (summary buffer) local variables, or cons of
+variables and their default values (when the default values are not
+nil), that should be made global while the summary buffer is active.
+These variables can be used to set variables in the group parameters
+while still allowing them to affect operations done in other
+buffers. For example:
+
+@lisp
+(setq gnus-newsgroup-variables
+ '(message-use-followup-to
+ (gnus-visible-headers .
+ "^From:\\|^Newsgroups:\\|^Subject:\\|^Date:\\|^To:")))
+@end lisp
+
@end table
@item M-s
@kindex M-s (Summary)
@findex gnus-summary-search-article-forward
-Search through all subsequent articles for a regexp
+Search through all subsequent (raw) articles for a regexp
(@code{gnus-summary-search-article-forward}).
@item M-r
@kindex M-r (Summary)
@findex gnus-summary-search-article-backward
-Search through all previous articles for a regexp
+Search through all previous (raw) articles for a regexp
(@code{gnus-summary-search-article-backward}).
@item &
@kindex & (Summary)
@findex gnus-summary-execute-command
-This command will prompt you for a header field, a regular expression to
-match on this field, and a command to be executed if the match is made
-(@code{gnus-summary-execute-command}). If given a prefix, search
-backward instead.
+This command will prompt you for a header, a regular expression to match
+on this field, and a command to be executed if the match is made
+(@code{gnus-summary-execute-command}). If the header is an empty
+string, the match is done on the entire article. If given a prefix,
+search backward instead.
+
+For instance, @kbd{& RET some.*string #} will put the process mark on
+all articles that have heads or bodies that match @samp{some.*string}.
@item M-&
@kindex M-& (Summary)
Pull all cached articles (for the current group) into the summary buffer
(@code{gnus-summary-insert-cached-articles}).
+@item Y d
+@kindex Y d (Summary)
+@findex gnus-summary-insert-dormant-articles
+Pull all dormant articles (for the current group) into the summary buffer
+(@code{gnus-summary-insert-dormant-articles}).
+
@end table
some format, you @kbd{C-d} and read these messages in a more convenient
fashion.
-@item M-C-d
-@kindex M-C-d (Summary)
+@item C-M-d
+@kindex C-M-d (Summary)
@findex gnus-summary-read-document
This command is very similar to the one above, but lets you gather
several documents into one biiig group
Expand the summary buffer window (@code{gnus-summary-expand-window}).
If given a prefix, force an @code{article} window configuration.
-@item M-C-e
-@kindex M-C-e (Summary)
+@item C-M-e
+@kindex C-M-e (Summary)
@findex gnus-summary-edit-parameters
Edit the group parameters (@pxref{Group Parameters}) of the current
group (@code{gnus-summary-edit-parameters}).
-@item M-C-g
-@kindex M-C-g (Summary)
+@item C-M-a
+@kindex C-M-a (Summary)
@findex gnus-summary-customize-parameters
Customize the group parameters (@pxref{Group Parameters}) of the current
group (@code{gnus-summary-customize-parameters}).
@vindex gnus-summary-prepare-exit-hook
@c @icon{gnus-summary-exit}
Exit the current group and update all information on the group
-(@code{gnus-summary-exit}). @code{gnus-summary-prepare-exit-hook} is
+(@code{gnus-summary-exit}). @code{gnus-summary-prepare-exit-hook} is
called before doing much of the exiting, which calls
@code{gnus-summary-expire-articles} by default.
@code{gnus-summary-exit-hook} is called after finishing the exit
@end table
@vindex gnus-exit-group-hook
-@code{gnus-exit-group-hook} is called when you exit the current
-group.
+@code{gnus-exit-group-hook} is called when you exit the current group
+with an ``updating'' exit. For instance @kbd{Q}
+(@code{gnus-summary-exit-no-update}) does not call this hook.
@findex gnus-summary-wake-up-the-dead
@findex gnus-dead-summary-mode
@code{gnus-save-duplicate-list} to @code{nil}. Uhm. I'll leave this up
to you to figure out, I think.
+@node Security
+@section Security
+
+Gnus is able to verify signed messages or decrypt encrypted messages.
+The formats that are supported are PGP, @sc{pgp/mime} and @sc{s/mime},
+however you need some external programs to get things to work:
+
+@enumerate
+@item
+To handle PGP and PGP/MIME messages, you have to install an OpenPGP
+implementation such as GnuPG. The lisp interface to GnuPG included
+with Gnus is called PGG (@pxref{Top, ,PGG, pgg, PGG Manual}), but
+Mailcrypt and gpg.el are also supported.
+
+@item
+To handle @sc{s/mime} message, you need to install OpenSSL. OpenSSL 0.9.6
+or newer is recommended.
+
+@end enumerate
+
+More information on how to set things up can be found in the message
+manual (@pxref{Security, ,Security, message, Message Manual}).
-@node The Article Buffer
-@chapter The Article Buffer
+@table @code
+@item mm-verify-option
+@vindex mm-verify-option
+Option of verifying signed parts. @code{never}, not verify;
+@code{always}, always verify; @code{known}, only verify known
+protocols. Otherwise, ask user.
+
+@item mm-decrypt-option
+@vindex mm-decrypt-option
+Option of decrypting encrypted parts. @code{never}, no decryption;
+@code{always}, always decrypt; @code{known}, only decrypt known
+protocols. Otherwise, ask user.
+
+@item mml1991-use
+@vindex mml1991-use
+Symbol indicating elisp interface to OpenPGP implementation for PGP
+messages. The default is @code{pgg}, but @code{mailcrypt} and
+@code{gpg} are also supported although deprecated.
+
+@item mml2015-use
+@vindex mml2015-use
+Symbol indicating elisp interface to OpenPGP implementation for
+PGP/MIME messages. The default is @code{pgg}, but @code{mailcrypt}
+and @code{gpg} are also supported although deprecated.
+
+@end table
+
+@node Mailing List
+@section Mailing List
+
+@kindex A M (summary)
+@findex gnus-mailing-list-insinuate
+Gnus understands some mailing list fields of RFC 2369. To enable it,
+either add a `to-list' group parameter (@pxref{Group Parameters}),
+possibly using @kbd{A M} (@code{gnus-mailing-list-insinuate}) in the
+summary buffer, or say:
+
+@lisp
+(add-hook 'gnus-summary-mode-hook 'turn-on-gnus-mailing-list-mode)
+@end lisp
+
+That enables the following commands to the summary buffer:
+
+@table @kbd
+
+@item C-c C-n h
+@kindex C-c C-n h (Summary)
+@findex gnus-mailing-list-help
+Send a message to fetch mailing list help, if List-Help field exists.
+
+@item C-c C-n s
+@kindex C-c C-n s (Summary)
+@findex gnus-mailing-list-subscribe
+Send a message to subscribe the mailing list, if List-Subscribe field exists.
+
+@item C-c C-n u
+@kindex C-c C-n u (Summary)
+@findex gnus-mailing-list-unsubscribe
+Send a message to unsubscribe the mailing list, if List-Unsubscribe
+field exists.
+
+@item C-c C-n p
+@kindex C-c C-n p (Summary)
+@findex gnus-mailing-list-post
+Post to the mailing list, if List-Post field exists.
+
+@item C-c C-n o
+@kindex C-c C-n o (Summary)
+@findex gnus-mailing-list-owner
+Send a message to the mailing list owner, if List-Owner field exists.
+
+@item C-c C-n a
+@kindex C-c C-n a (Summary)
+@findex gnus-mailing-list-owner
+Browse the mailing list archive, if List-Archive field exists.
+
+@end table
+
+@node Article Buffer
+@chapter Article Buffer
@cindex article buffer
The articles are displayed in the article buffer, of which there is only
tell Gnus otherwise.
@menu
-* Hiding Headers:: Deciding what headers should be displayed.
-* Using MIME:: Pushing articles through @sc{mime} before reading them.
-* Customizing Articles:: Tailoring the look of the articles.
-* Article Keymap:: Keystrokes available in the article buffer.
-* Misc Article:: Other stuff.
+* Hiding Headers:: Deciding what headers should be displayed.
+* Using MIME:: Pushing articles through @sc{mime} before reading them.
+* Customizing Articles:: Tailoring the look of the articles.
+* Article Keymap:: Keystrokes available in the article buffer.
+* Misc Article:: Other stuff.
@end menu
@findex gnus-article-hide-boring-headers
@vindex gnus-boring-article-headers
You can hide further boring headers by setting
-@code{gnus-treat-hide-boring-header} to @code{head}. What this function
+@code{gnus-treat-hide-boring-headers} to @code{head}. What this function
does depends on the @code{gnus-boring-article-headers} variable. It's a
list, but this list doesn't actually contain header names. Instead is
lists various @dfn{boring conditions} that Gnus can check and remove
@item newsgroups
Remove the @code{Newsgroups} header if it only contains the current group
name.
+@item to-address
+Remove the @code{To} header if it only contains the address identical to
+the current groups's @code{to-address} parameter.
@item date
Remove the @code{Date} header if the article is less than three days
old.
Remove all @code{To} headers if there are more than one.
@end table
-To include the four three elements, you could say something like;
+To include these three elements, you could say something like:
@lisp
(setq gnus-boring-article-headers
@node Using MIME
-@section Using @sc{mime}
+@section Using MIME
@cindex @sc{mime}
Mime is a standard for waving your hands through the air, aimlessly,
@table @kbd
@findex gnus-article-press-button
@item RET (Article)
+@kindex RET (Article)
@itemx BUTTON-2 (Article)
Toggle displaying of the @sc{mime} object
-(@code{gnus-article-press-button}).
+(@code{gnus-article-press-button}). If builtin viewers can not display
+the object, Gnus resorts to external viewers in the @file{mailcap}
+files. If a viewer has the @samp{copiousoutput} specification, the
+object is displayed inline.
@findex gnus-mime-view-part
@item M-RET (Article)
+@kindex M-RET (Article)
@itemx v (Article)
Prompt for a method, and then view the @sc{mime} object using this
method (@code{gnus-mime-view-part}).
+@findex gnus-mime-view-part-as-type
+@item t (Article)
+@kindex t (Article)
+View the @sc{mime} object as if it were a different @sc{mime} media type
+(@code{gnus-mime-view-part-as-type}).
+
+@findex gnus-mime-view-part-as-charset
+@item C (Article)
+@kindex C (Article)
+Prompt for a charset, and then view the @sc{mime} object using this
+charset (@code{gnus-mime-view-part-as-charset}).
+
@findex gnus-mime-save-part
@item o (Article)
+@kindex o (Article)
Prompt for a file name, and then save the @sc{mime} object
(@code{gnus-mime-save-part}).
+@findex gnus-mime-save-part-and-strip
+@item C-o (Article)
+@kindex C-o (Article)
+Prompt for a file name, then save the @sc{mime} object and strip it from
+the article. Then proceed to article editing, where a reasonable
+suggestion is being made on how the altered article should look
+like. The stripped @sc{mime} object will be referred via the
+message/external-body @sc{mime} type.
+(@code{gnus-mime-save-part-and-strip}).
+
@findex gnus-mime-copy-part
@item c (Article)
+@kindex c (Article)
Copy the @sc{mime} object to a fresh buffer and display this buffer
-(@code{gnus-mime-copy-part}).
+(@code{gnus-mime-copy-part}). Compressed files like @file{.gz} and
+@file{.bz2} are automatically decompressed if
+@code{auto-compression-mode} is enabled (@pxref{Compressed Files,,
+Accessing Compressed Files, emacs, The Emacs Editor}).
+
+@findex gnus-mime-print-part
+@item p (Article)
+@kindex p (Article)
+Print the @sc{mime} object (@code{gnus-mime-print-part}). This
+command respects the @samp{print=} specifications in the
+@file{.mailcap} file.
+
+@findex gnus-mime-inline-part
+@item i (Article)
+@kindex i (Article)
+Insert the contents of the @sc{mime} object into the buffer
+(@code{gnus-mime-inline-part}) as text/plain. If given a prefix, insert
+the raw contents without decoding. If given a numerical prefix, you can
+do semi-manual charset stuff (see
+@code{gnus-summary-show-article-charset-alist} in @pxref{Paging the
+Article}).
+
+@findex gnus-mime-view-part-internally
+@item E (Article)
+@kindex E (Article)
+View the @sc{mime} object with an internal viewer. If no internal
+viewer is available, use an external viewer
+(@code{gnus-mime-view-part-internally}).
+
+@findex gnus-mime-view-part-externally
+@item e (Article)
+@kindex e (Article)
+View the @sc{mime} object with an external viewer.
+(@code{gnus-mime-view-part-externally}).
@findex gnus-mime-pipe-part
@item | (Article)
+@kindex | (Article)
Output the @sc{mime} object to a process (@code{gnus-mime-pipe-part}).
+
+@findex gnus-mime-action-on-part
+@item . (Article)
+@kindex . (Article)
+Interactively run an action on the @sc{mime} object
+(@code{gnus-mime-action-on-part}).
+
@end table
Gnus will display some @sc{mime} objects automatically. The way Gnus
-determines which parts to do this with is described in the Emacs MIME
-manual.
+determines which parts to do this with is described in the Emacs
+@sc{mime} manual.
It might be best to just use the toggling functions from the article
buffer to avoid getting nasty surprises. (For instance, you enter the
@code{gnus-treat-hide-headers}. Below is a list of variables that can
be set, but first we discuss the values these variables can have.
+Note: Some values, while valid, make little sense. Check the list below
+for sensible values.
+
@enumerate
@item
@code{nil}: Don't do this treatment.
The following treatment options are available. The easiest way to
customize this is to examine the @code{gnus-article-treat} customization
-group.
+group. Values in parenthesis are suggested sensible values. Others are
+possible but those listed are probably sufficient for most people.
@table @code
-@item gnus-treat-highlight-signature
-@item gnus-treat-buttonize
-@item gnus-treat-buttonize-head
-@item gnus-treat-emphasize
-@item gnus-treat-fill-article
-@item gnus-treat-strip-cr
-@item gnus-treat-hide-headers
-@item gnus-treat-hide-boring-headers
-@item gnus-treat-hide-signature
-@item gnus-treat-hide-citation
-@item gnus-treat-strip-pgp
-@item gnus-treat-strip-pem
-@item gnus-treat-highlight-headers
-@item gnus-treat-highlight-citation
-@item gnus-treat-highlight-signature
-@item gnus-treat-date-ut
-@item gnus-treat-date-local
-@item gnus-treat-date-lapsed
-@item gnus-treat-date-original
-@item gnus-treat-strip-headers-in-body
-@item gnus-treat-strip-trailing-blank-lines
-@item gnus-treat-strip-leading-blank-lines
-@item gnus-treat-strip-multiple-blank-lines
-@item gnus-treat-strip-blank-lines
-@item gnus-treat-overstrike
-@item gnus-treat-display-xface
-@item gnus-treat-display-smileys
-@item gnus-treat-display-picons
-@item gnus-treat-capitalize-sentences
-@item gnus-treat-fill-long-lines
+@item gnus-treat-buttonize (t, integer)
+@item gnus-treat-buttonize-head (head)
+
+@xref{Article Buttons}.
+
+@item gnus-treat-capitalize-sentences (t, integer)
+@item gnus-treat-overstrike (t, integer)
+@item gnus-treat-strip-cr (t, integer)
+@item gnus-treat-strip-headers-in-body (t, integer)
+@item gnus-treat-strip-leading-blank-lines (t, integer)
+@item gnus-treat-strip-multiple-blank-lines (t, integer)
+@item gnus-treat-strip-pem (t, last, integer)
+@item gnus-treat-strip-pgp (t, last, integer)
+@item gnus-treat-strip-trailing-blank-lines (t, last, integer)
+@item gnus-treat-unsplit-urls (t, integer)
+@item gnus-treat-wash-html (t, integer)
+
+@xref{Article Washing}.
+
+@item gnus-treat-date-english (head)
+@item gnus-treat-date-iso8601 (head)
+@item gnus-treat-date-lapsed (head)
+@item gnus-treat-date-local (head)
+@item gnus-treat-date-original (head)
+@item gnus-treat-date-user-defined (head)
+@item gnus-treat-date-ut (head)
+
+@xref{Article Date}.
+
+@item gnus-treat-from-picon (head)
+@item gnus-treat-mail-picon (head)
+@item gnus-treat-newsgroups-picon (head)
+
+@xref{Picons}.
+
+@item gnus-treat-display-smileys (t, integer)
+
+@item gnus-treat-body-boundary (head)
+
+@vindex gnus-body-boundary-delimiter
+Adds a delimiter between header and body, the string used as delimiter
+is controlled by @code{gnus-body-boundary-delimiter}.
+
+@xref{Smileys}.
+
+@item gnus-treat-display-xface (head)
+
+@xref{X-Face}.
+
+@item gnus-treat-emphasize (t, head, integer)
+@item gnus-treat-fill-article (t, integer)
+@item gnus-treat-fill-long-lines (t, integer)
+@item gnus-treat-hide-boring-headers (head)
+@item gnus-treat-hide-citation (t, integer)
+@item gnus-treat-hide-citation-maybe (t, integer)
+@item gnus-treat-hide-headers (head)
+@item gnus-treat-hide-signature (t, last)
+
+@xref{Article Hiding}.
+
+@item gnus-treat-highlight-citation (t, integer)
+@item gnus-treat-highlight-headers (head)
+@item gnus-treat-highlight-signature (t, last, integer)
+
+@xref{Article Highlighting}.
+
@item gnus-treat-play-sounds
@item gnus-treat-translate
+@item gnus-treat-x-pgp-sig (head)
+
+@item gnus-treat-unfold-headers (head)
+@item gnus-treat-fold-headers (head)
+@item gnus-treat-fold-newsgroups (head)
+@item gnus-treat-leading-whitespace (head)
+
+@xref{Article Header}.
+
+
@end table
@vindex gnus-part-display-hook
@code{gnus-part-display-hook}. The functions are called narrowed to the
part, and you can do anything you like, pretty much. There is no
information that you have to keep in the buffer---you can change
-everything. However, you shouldn't delete any headers. Instead make
-them invisible if you want to make them go away.
+everything.
@node Article Keymap
@findex gnus-article-prev-button
Go to the previous button, if any (@code{gnus-article-prev-button}).
-@end table
+@item R
+@kindex R (Article)
+@findex gnus-article-reply-with-original
+Send a reply to the current article and yank the current article
+(@code{gnus-article-reply-with-original}). If given a prefix, make a
+wide reply. If the region is active, only yank the text in the
+region.
+
+@item F
+@kindex F (Article)
+@findex gnus-article-followup-with-original
+Send a followup to the current article and yank the current article
+(@code{gnus-article-followup-with-original}). If given a prefix, make
+a wide reply. If the region is active, only yank the text in the
+region.
+
+
+@end table
@node Misc Article
@item gnus-article-mode-line-format
This variable is a format string along the same lines as
@code{gnus-summary-mode-line-format} (@pxref{Mode Line Formatting}). It
-accepts the same format specifications as that variable, with one
-extension:
+accepts the same format specifications as that variable, with two
+extensions:
@table @samp
+
@item w
The @dfn{wash status} of the article. This is a short string with one
character for each possible article wash operation that may have been
-performed.
+performed. The characters and their meaning:
+
+@table @samp
+
+@item c
+Displayed when cited text may be hidden in the article buffer.
+
+@item h
+Displayed when headers are hidden in the article buffer.
+
+@item p
+Displayed when article is digitally signed or encrypted, and Gnus has
+hidden the security headers. (N.B. does not tell anything about
+security status, i.e. good or bad signature.)
+
+@item s
+Displayed when the signature has been hidden in the Article buffer.
+
+@item o
+Displayed when Gnus has treated overstrike characters in the article buffer.
+
+@item e
+Displayed when Gnus has treated emphasised strings in the article buffer.
+
+@end table
+
@item m
The number of @sc{mime} parts in the article.
+
@end table
@vindex gnus-break-pages
@cindex reply
@cindex followup
@cindex post
+@cindex using gpg
+@cindex using s/mime
+@cindex using smime
@kindex C-c C-c (Post)
All commands for posting and mailing will put you in a message buffer
-where you can edit the article all you like, before you send the article
-by pressing @kbd{C-c C-c}. @xref{Top, , Top, message, The Message
-Manual}. If you are in a foreign news group, and you wish to post the
-article using the foreign server, you can give a prefix to @kbd{C-c C-c}
-to make Gnus try to post using the foreign server.
+where you can edit the article all you like, before you send the
+article by pressing @kbd{C-c C-c}. @xref{Top, , Overview, message,
+Message Manual}. Where the message will be posted/mailed to depends
+on your setup (@pxref{Posting Server}).
@menu
-* Mail:: Mailing and replying.
-* Post:: Posting and following up.
-* Posting Server:: What server should you post via?
-* Mail and Post:: Mailing and posting at the same time.
-* Archived Messages:: Where Gnus stores the messages you've sent.
-* Posting Styles:: An easier way to specify who you are.
-* Drafts:: Postponing messages and rejected messages.
-* Rejected Articles:: What happens if the server doesn't like your article?
+* Mail:: Mailing and replying.
+* Posting Server:: What server should you post and mail via?
+* Mail and Post:: Mailing and posting at the same time.
+* Archived Messages:: Where Gnus stores the messages you've sent.
+* Posting Styles:: An easier way to specify who you are.
+* Drafts:: Postponing messages and rejected messages.
+* Rejected Articles:: What happens if the server doesn't like your article?
+* Signing and encrypting:: How to compose secure messages.
@end menu
Also see @pxref{Canceling and Superseding} for information on how to
@item gnus-uu-digest-headers
@vindex gnus-uu-digest-headers
List of regexps to match headers included in digested messages. The
-headers will be included in the sequence they are matched.
+headers will be included in the sequence they are matched. If
+@code{nil} include all headers.
@item gnus-add-to-list
@vindex gnus-add-to-list
If non-@code{nil}, add a @code{to-list} group parameter to mail groups
that have none when you do a @kbd{a}.
-@end table
-
-
-@node Post
-@section Post
-
-Variables for composing news articles:
-
-@table @code
-@item gnus-sent-message-ids-file
-@vindex gnus-sent-message-ids-file
-Gnus will keep a @code{Message-ID} history file of all the mails it has
-sent. If it discovers that it has already sent a mail, it will ask the
-user whether to re-send the mail. (This is primarily useful when
-dealing with @sc{soup} packets and the like where one is apt to send the
-same packet multiple times.) This variable says what the name of this
-history file is. It is @file{~/News/Sent-Message-IDs} by default. Set
-this variable to @code{nil} if you don't want Gnus to keep a history
-file.
-
-@item gnus-sent-message-ids-length
-@vindex gnus-sent-message-ids-length
-This variable says how many @code{Message-ID}s to keep in the history
-file. It is 1000 by default.
-
+@item gnus-confirm-mail-reply-to-news
+@vindex gnus-confirm-mail-reply-to-news
+This can also be a function receiving the group name as the only
+parameter which should return non-@code{nil} if a confirmation is
+needed, or a regular expression matching group names, where
+confirmation is should be asked for.
+
+If you find yourself never wanting to reply to mail, but occasionally
+press R anyway, this variable might be for you.
+
+@item gnus-confirm-treat-mail-like-news
+@vindex gnus-confirm-treat-mail-like-news
+If non-@code{nil}, Gnus also requests confirmation according to
+@code{gnus-confirm-mail-reply-to-news} when replying to mail. This is
+useful for treating mailing lists like newsgroups.
+
@end table
Thank you for asking. I hate you.
-@vindex gnus-post-method
+It can be quite complicated.
-It can be quite complicated. Normally, Gnus will use the same native
-server. However. If your native server doesn't allow posting, just
-reading, you probably want to use some other server to post your
-(extremely intelligent and fabulously interesting) articles. You can
-then set the @code{gnus-post-method} to some other method:
+@vindex gnus-post-method
+When posting news, Message usually invokes @code{message-send-news}
+(@pxref{News Variables, , News Variables, message, Message Manual}).
+Normally, Gnus will post using the same select method as you're
+reading from (which might be convenient if you're reading lots of
+groups from different private servers). However. If the server
+you're reading from doesn't allow posting, just reading, you probably
+want to use some other server to post your (extremely intelligent and
+fabulously interesting) articles. You can then set the
+@code{gnus-post-method} to some other method:
@lisp
(setq gnus-post-method '(nnspool ""))
Now, if you've done this, and then this server rejects your article, or
this server is down, what do you do then? To override this variable you
can use a non-zero prefix to the @kbd{C-c C-c} command to force using
-the ``current'' server for posting.
+the ``current'' server, to get back the default behavior, for posting.
If you give a zero prefix (i.e., @kbd{C-u 0 C-c C-c}) to that command,
Gnus will prompt you for what method to use for posting.
If that's the case, Gnus will always prompt you for what method to use
for posting.
-Finally, if you want to always post using the same select method as
-you're reading from (which might be convenient if you're reading lots of
-groups from different private servers), you can set this variable to
-@code{current}.
+Finally, if you want to always post using the native select method,
+you can set this variable to @code{native}.
+
+When sending mail, Message invokes @code{message-send-mail-function}.
+The default function, @code{message-send-mail-with-sendmail}, pipes
+your article to the @code{sendmail} binary for further queuing and
+sending. When your local system is not configured for sending mail
+using @code{sendmail}, and you have access to a remote @sc{smtp}
+server, you can set @code{message-send-mail-function} to
+@code{smtpmail-send-it} and make sure to setup the @code{smtpmail}
+package correctly. An example:
+
+@lisp
+(setq message-send-mail-function 'smtpmail-send-it
+ smtpmail-default-smtp-server "YOUR SMTP HOST")
+@end lisp
+
+To the thing similar to this, there is @code{message-smtpmail-send-it}.
+It is useful if your ISP requires the POP-before-SMTP authentication.
+See the documentation for the function @code{mail-source-touch-pop}.
+Other possible choices for @code{message-send-mail-function} includes
+@code{message-send-mail-with-mh}, @code{message-send-mail-with-qmail},
+and @code{feedmail-send-it}.
@node Mail and Post
@section Mail and Post
(add-hook 'message-send-hook 'ispell-message)
@end lisp
+If you want to change the @code{ispell} dictionary based on what group
+you're in, you could say something like the following:
+
+@lisp
+(add-hook 'gnus-select-group-hook
+ (lambda ()
+ (cond
+ ((string-match
+ "^de\\." (gnus-group-real-name gnus-newsgroup-name))
+ (ispell-change-dictionary "deutsch"))
+ (t
+ (ispell-change-dictionary "english")))))
+@end lisp
+
+Modify to suit your needs.
+
@node Archived Messages
@section Archived Messages
@code{gnus-message-archive-group} variable should be @code{nil}, which
is the default.
+For archiving interesting messages in a group you read, see the
+@kbd{B c} (@code{gnus-summary-copy-article}) command (@pxref{Mail
+Group Commands}).
+
@vindex gnus-message-archive-method
@code{gnus-message-archive-method} says what virtual server Gnus is to
use to store sent messages. The default is:
@end lisp
You can, however, use any mail select method (@code{nnml},
-@code{nnmbox}, etc.). @code{nnfolder} is a quite likeable select method
+@code{nnmbox}, etc.). @code{nnfolder} is a quite likable select method
for doing this sort of thing, though. If you don't like the default
directory chosen, you could say something like:
This variable can be used to do the following:
@itemize @bullet
-@item a string
+@item
+a string
Messages will be saved in that group.
-@item a list of strings
+
+Note that you can include a select method in the group name, then the
+message will not be stored in the select method given by
+@code{gnus-message-archive-method}, but in the select method specified
+by the group name, instead. Suppose @code{gnus-message-archive-method}
+has the default value shown above. Then setting
+@code{gnus-message-archive-group} to @code{"foo"} means that outgoing
+messages are stored in @samp{nnfolder+archive:foo}, but if you use the
+value @code{"nnml:foo"}, then outgoing messages will be stored in
+@samp{nnml:foo}.
+@item
+a list of strings
Messages will be saved in all those groups.
-@item an alist of regexps, functions and forms
+@item
+an alist of regexps, functions and forms
When a key ``matches'', the result is used.
-@item @code{nil}
+@item
+@code{nil}
No message archiving will take place. This is the default.
@end itemize
(setq gnus-message-archive-group
'((if (message-news-p)
"misc-news"
- (concat "mail." (format-time-string
- "%Y-%m" (current-time))))))
+ (concat "mail." (format-time-string "%Y-%m")))))
@end lisp
-(XEmacs 19.13 doesn't have @code{format-time-string}, so you'll have to
-use a different value for @code{gnus-message-archive-group} there.)
+@c (XEmacs 19.13 doesn't have @code{format-time-string}, so you'll have to
+@c use a different value for @code{gnus-message-archive-group} there.)
Now, when you send a message off, it will be stored in the appropriate
group. (If you want to disable storing for just one particular message,
This variable can be used instead of @code{gnus-message-archive-group},
but the latter is the preferred method.
+
+@item gnus-gcc-mark-as-read
+@vindex gnus-gcc-mark-as-read
+If non-@code{nil}, automatically mark @code{Gcc} articles as read.
+
+@item gnus-gcc-externalize-attachments
+@vindex gnus-gcc-externalize-attachments
+If @code{nil}, attach files as normal parts in Gcc copies; if a regexp
+and matches the Gcc group name, attach files as external parts; if it is
+@code{all}, attach local files as external parts; if it is other
+non-@code{nil}, the behavior is the same as @code{all}, but it may be
+changed in the future.
+
@end table
The first element in each style is called the @code{match}. If it's a
string, then Gnus will try to regexp match it against the group name.
-If it's a function symbol, that function will be called with no
+If it is the form @code{(header MATCH REGEXP)}, then Gnus will look in
+the original article for a header whose name is MATCH and compare that
+REGEXP. MATCH and REGEXP are strings. (There original article is the
+one you are replying or following up to. If you are not composing a
+reply or a followup, then there is nothing to match against.) If the
+@code{match} is a function symbol, that function will be called with no
arguments. If it's a variable symbol, then the variable will be
referenced. If it's a list, then that list will be @code{eval}ed. In
any case, if this returns a non-@code{nil} value, then the style is said
to @dfn{match}.
-Each style may contain a arbitrary amount of @dfn{attributes}. Each
-attribute consists of a @var{(name value)} pair. The attribute name
-can be one of @code{signature}, @code{signature-file},
-@code{organization}, @code{address}, @code{name} or @code{body}. The
-attribute name can also be a string. In that case, this will be used as
-a header name, and the value will be inserted in the headers of the
-article.
-
-The attribute value can be a string (used verbatim), a function (the
-return value will be used), a variable (its value will be used) or a
-list (it will be @code{eval}ed and the return value will be used).
+Each style may contain an arbitrary amount of @dfn{attributes}. Each
+attribute consists of a @code{(@var{name} @var{value})} pair. The
+attribute name can be one of @code{signature}, @code{signature-file},
+@code{x-face-file}, @code{address} (overriding
+@code{user-mail-address}), @code{name} (overriding
+@code{(user-full-name)}) or @code{body}. The attribute name can also
+be a string or a symbol. In that case, this will be used as a header
+name, and the value will be inserted in the headers of the article; if
+the value is @code{nil}, the header name will be removed. If the
+attribute name is @code{eval}, the form is evaluated, and the result
+is thrown away.
+
+The attribute value can be a string (used verbatim), a function with
+zero arguments (the return value will be used), a variable (its value
+will be used) or a list (it will be @code{eval}ed and the return value
+will be used). The functions and sexps are called/@code{eval}ed in the
+message buffer that is being set up. The headers of the current article
+are available through the @code{message-reply-headers} variable, which
+is a vector of the following headers: number subject from date id
+references chars lines xref extra.
+
+@vindex message-reply-headers
If you wish to check whether the message you are about to compose is
meant to be a news article or a mail message, you can check the values
(organization "People's Front Against MWM"))
("^rec.humor"
(signature my-funny-signature-randomizer))
- ((equal (system-name) "gnarly")
+ ((equal (system-name) "gnarly") ;; A form
(signature my-quote-randomizer))
- ((message-news-p)
+ (message-news-p ;; A function symbol
(signature my-news-signature))
- ((posting-from-work-p)
+ (window-system ;; A value symbol
+ ("X-Window-System" (format "%s" window-system)))
+ ;; If I'm replying to Larsi, set the Organization header.
+ ((header "from" "larsi.*org")
+ (Organization "Somewhere, Inc."))
+ ((posting-from-work-p) ;; A user defined function
(signature-file "~/.work-signature")
(address "user@@bar.foo")
(body "You are fired.\n\nSincerely, your boss.")
(organization "Important Work, Inc"))
+ ("nnml:.*"
+ (From (save-excursion
+ (set-buffer gnus-article-buffer)
+ (message-fetch-field "to"))))
("^nn.+:"
(signature-file "~/.mail-signature"))))
@end lisp
+The @samp{nnml:.*} rule means that you use the @code{To} address as the
+@code{From} address in all your outgoing replies, which might be handy
+if you fill many roles.
+
@node Drafts
@section Drafts
(@pxref{Drafts}). When the server comes back up again, you'd then
typically enter that group and send all the articles off.
+@node Signing and encrypting
+@section Signing and encrypting
+@cindex using gpg
+@cindex using s/mime
+@cindex using smime
+
+Gnus can digitally sign and encrypt your messages, using vanilla PGP
+format or @sc{pgp/mime} or @sc{s/mime}. For decoding such messages,
+see the @code{mm-verify-option} and @code{mm-decrypt-option} options
+(@pxref{Security}).
+
+Often, you would like to sign replies to people who send you signed
+messages. Even more often, you might want to encrypt messages which
+are in reply to encrypted messages. Gnus offers
+@code{gnus-message-replysign} to enable the former, and
+@code{gnus-message-replyencrypt} for the latter. In addition, setting
+@code{gnus-message-replysignencrypted} (on by default) will sign
+automatically encrypted messages.
+
+Instructing MML to perform security operations on a @sc{mime} part is
+done using the @kbd{C-c C-m s} key map for signing and the @kbd{C-c
+C-m c} key map for encryption, as follows.
+
+@table @kbd
+
+@item C-c C-m s s
+@kindex C-c C-m s s
+@findex mml-secure-message-sign-smime
+
+Digitally sign current message using @sc{s/mime}.
+
+@item C-c C-m s o
+@kindex C-c C-m s o
+@findex mml-secure-message-sign-pgp
+
+Digitally sign current message using PGP.
+
+@item C-c C-m s p
+@kindex C-c C-m s p
+@findex mml-secure-message-sign-pgp
+
+Digitally sign current message using @sc{pgp/mime}.
+
+@item C-c C-m c s
+@kindex C-c C-m c s
+@findex mml-secure-message-encrypt-smime
+
+Digitally encrypt current message using @sc{s/mime}.
+
+@item C-c C-m c o
+@kindex C-c C-m c o
+@findex mml-secure-message-encrypt-pgp
+
+Digitally encrypt current message using PGP.
+
+@item C-c C-m c p
+@kindex C-c C-m c p
+@findex mml-secure-message-encrypt-pgpmime
+
+Digitally encrypt current message using @sc{pgp/mime}.
+
+@item C-c C-m C-n
+@kindex C-c C-m C-n
+@findex mml-unsecure-message
+Remove security related MML tags from message.
+
+@end table
+
+@xref{Security, ,Security, message, Message Manual}, for more information.
@node Select Methods
@chapter Select Methods
A foreign group (or any group, really) is specified by a @dfn{name} and
a @dfn{select method}. To take the latter first, a select method is a
-list where the first element says what backend to use (e.g. @code{nntp},
+list where the first element says what back end to use (e.g. @code{nntp},
@code{nnspool}, @code{nnml}) and the second element is the @dfn{server
name}. There may be additional elements in the select method, where the
-value may have special meaning for the backend in question.
+value may have special meaning for the back end in question.
One could say that a select method defines a @dfn{virtual server}---so
-we do just that (@pxref{The Server Buffer}).
+we do just that (@pxref{Server Buffer}).
-The @dfn{name} of the group is the name the backend will recognize the
+The @dfn{name} of the group is the name the back end will recognize the
group as.
For instance, the group @samp{soc.motss} on the @sc{nntp} server
@samp{some.where.edu} will have the name @samp{soc.motss} and select
method @code{(nntp "some.where.edu")}. Gnus will call this group
@samp{nntp+some.where.edu:soc.motss}, even though the @code{nntp}
-backend just knows this group as @samp{soc.motss}.
+back end just knows this group as @samp{soc.motss}.
The different methods all have their peculiarities, of course.
@menu
-* The Server Buffer:: Making and editing virtual servers.
-* Getting News:: Reading USENET news with Gnus.
-* Getting Mail:: Reading your personal mail with Gnus.
-* Other Sources:: Reading directories, files, SOUP packets.
-* Combined Groups:: Combining groups into one group.
-* Gnus Unplugged:: Reading news and mail offline.
+* Server Buffer:: Making and editing virtual servers.
+* Getting News:: Reading USENET news with Gnus.
+* Getting Mail:: Reading your personal mail with Gnus.
+* Browsing the Web:: Getting messages from a plethora of Web sources.
+* IMAP:: Using Gnus as a @sc{imap} client.
+* Other Sources:: Reading directories, files, SOUP packets.
+* Combined Groups:: Combining groups into one group.
+* Gnus Unplugged:: Reading news and mail offline.
@end menu
-@node The Server Buffer
-@section The Server Buffer
+@node Server Buffer
+@section Server Buffer
Traditionally, a @dfn{server} is a machine or a piece of software that
one connects to, and then requests information from. Gnus does not
connect directly to any real servers, but does all transactions through
-one backend or other. But that's just putting one layer more between
+one back end or other. But that's just putting one layer more between
the actual media and Gnus, so we might just as well say that each
-backend represents a virtual server.
+back end represents a virtual server.
-For instance, the @code{nntp} backend may be used to connect to several
+For instance, the @code{nntp} back end may be used to connect to several
different actual @sc{nntp} servers, or, perhaps, to many different ports
-on the same actual @sc{nntp} server. You tell Gnus which backend to
+on the same actual @sc{nntp} server. You tell Gnus which back end to
use, and what parameters to set by specifying a @dfn{select method}.
These select method specifications can sometimes become quite
complicated---say, for instance, that you want to read from the
@sc{nntp} server @samp{news.funet.fi} on port number 13, which
hangs if queried for @sc{nov} headers and has a buggy select. Ahem.
-Anyways, if you had to specify that for each group that used this
+Anyway, if you had to specify that for each group that used this
server, that would be too much work, so Gnus offers a way of naming
select methods, which is what you do in the server buffer.
(@code{gnus-group-enter-server-mode}) command in the group buffer.
@menu
-* Server Buffer Format:: You can customize the look of this buffer.
-* Server Commands:: Commands to manipulate servers.
-* Example Methods:: Examples server specifications.
-* Creating a Virtual Server:: An example session.
-* Server Variables:: Which variables to set.
-* Servers and Methods:: You can use server names as select methods.
-* Unavailable Servers:: Some servers you try to contact may be down.
+* Server Buffer Format:: You can customize the look of this buffer.
+* Server Commands:: Commands to manipulate servers.
+* Example Methods:: Examples server specifications.
+* Creating a Virtual Server:: An example session.
+* Server Variables:: Which variables to set.
+* Servers and Methods:: You can use server names as select methods.
+* Unavailable Servers:: Some servers you try to contact may be down.
@end menu
@vindex gnus-server-mode-hook
@table @samp
@item h
-How the news is fetched---the backend name.
+How the news is fetched---the back end name.
@item n
The name of this server.
@findex gnus-server-regenerate-server
Request that the server regenerate all its data structures
(@code{gnus-server-regenerate-server}). This can be useful if you have
-a mail backend that has gotten out of synch.
+a mail back end that has gotten out of sync.
@end table
@end lisp
As you can see, the first element in a select method is the name of the
-backend, and the second is the @dfn{address}, or @dfn{name}, if you
+back end, and the second is the @dfn{address}, or @dfn{name}, if you
will.
After these two elements, there may be an arbitrary number of
-@var{(variable form)} pairs.
+@code{(@var{variable} @var{form})} pairs.
To go back to the first example---imagine that you want to read from
port 15 on that machine. This is what the select method should
(nntp "news.funet.fi" (nntp-port-number 15))
@end lisp
-You should read the documentation to each backend to find out what
+You should read the documentation to each back end to find out what
variables are relevant, but here's an @code{nnmh} example:
-@code{nnmh} is a mail backend that reads a spool-like structure. Say
+@code{nnmh} is a mail back end that reads a spool-like structure. Say
you have two structures that you wish to access: One is your private
mail spool, and the other is a public one. Here's the possible spec for
your private mail:
(nnmh-get-new-mail nil))
@end lisp
+@cindex proxy
+@cindex firewall
+
If you are behind a firewall and only have access to the @sc{nntp}
server from the firewall machine, you can instruct Gnus to @code{rlogin}
on the firewall machine and telnet from there to the @sc{nntp} server.
@lisp
(nntp "firewall"
- (nntp-address "the.firewall.machine")
- (nntp-open-connection-function nntp-open-rlogin)
- (nntp-end-of-line "\n")
- (nntp-rlogin-parameters
- ("telnet" "the.real.nntp.host" "nntp")))
+ (nntp-open-connection-function nntp-open-via-rlogin-and-telnet)
+ (nntp-via-address "the.firewall.machine")
+ (nntp-address "the.real.nntp.host")
+ (nntp-end-of-line "\n"))
@end lisp
If you want to use the wonderful @code{ssh} program to provide a
-compressed connection over the modem line, you could create a virtual
-server that would look something like this:
+compressed connection over the modem line, you could add the following
+configuration to the example above:
+
+@lisp
+ (nntp-via-rlogin-command "ssh")
+@end lisp
+
+See also @code{nntp-via-rlogin-command-switches}.
+
+If you're behind a firewall, but have direct access to the outside world
+through a wrapper command like "runsocks", you could open a socksified
+telnet connection to the news server as follows:
@lisp
-(nntp "news"
- (nntp-address "copper.uio.no")
- (nntp-rlogin-program "ssh")
- (nntp-open-connection-function nntp-open-rlogin)
- (nntp-end-of-line "\n")
- (nntp-rlogin-parameters
- ("telnet" "news.uio.no" "nntp")))
+(nntp "outside"
+ (nntp-pre-command "runsocks")
+ (nntp-open-connection-function nntp-open-via-telnet)
+ (nntp-address "the.news.server")
+ (nntp-end-of-line "\n"))
@end lisp
This means that you have to have set up @code{ssh-agent} correctly to
@node Server Variables
@subsection Server Variables
-One sticky point when defining variables (both on backends and in Emacs
+One sticky point when defining variables (both on back ends and in Emacs
in general) is that some variables are typically initialized from other
variables when the definition of the variables is being loaded. If you
change the "base" variable after the variables have been loaded, you
new virtual @code{nnml} server, it will @emph{not} suffice to set just
@code{nnml-directory}---you have to explicitly set all the file
variables to be what you want them to be. For a complete list of
-variables for each backend, see each backend's section later in this
+variables for each back end, see each back end's section later in this
manual, but here's an example @code{nnml} definition:
@lisp
So, what happens if the machine was only feeling unwell temporarily?
How do you test to see whether the machine has come up again?
-You jump to the server buffer (@pxref{The Server Buffer}) and poke it
+You jump to the server buffer (@pxref{Server Buffer}) and poke it
with the following commands:
@table @kbd
Remove all marks to whether Gnus was denied connection from any servers
(@code{gnus-server-remove-denials}).
+@item L
+@kindex L (Server)
+@findex gnus-server-offline-server
+Set server status to offline (@code{gnus-server-offline-server}).
+
@end table
@node Getting News
@section Getting News
@cindex reading news
-@cindex news backends
+@cindex news back ends
A newsreader is normally used for reading news. Gnus currently provides
only two methods of getting news---it can read from an @sc{nntp} server,
or it can read from a local spool.
@menu
-* NNTP:: Reading news from an @sc{nntp} server.
-* News Spool:: Reading news from the local spool.
+* NNTP:: Reading news from an @sc{nntp} server.
+* News Spool:: Reading news from the local spool.
@end menu
@node NNTP
-@subsection @sc{nntp}
+@subsection NNTP
@cindex nntp
Subscribing to a foreign group from an @sc{nntp} server is rather easy.
The file contains one or more line, each of which define one server.
@item
-Each line may contain an arbitrary number of token/value pairs. The
-valid tokens include @samp{machine}, @samp{login}, @samp{password},
-@samp{default} and @samp{force}. (The latter is not a valid
-@file{.netrc}/@code{ftp} token, which is the only way the
-@file{.authinfo} file format deviates from the @file{.netrc} file
-format.)
+Each line may contain an arbitrary number of token/value pairs.
+
+The valid tokens include @samp{machine}, @samp{login}, @samp{password},
+@samp{default}. In addition Gnus introduces two new tokens, not present
+in the original @file{.netrc}/@code{ftp} syntax, namely @samp{port} and
+@samp{force}. (This is the only way the @file{.authinfo} file format
+deviates from the @file{.netrc} file format.) @samp{port} is used to
+indicate what port on the server the credentials apply to and
+@samp{force} is explained below.
@end enumerate
@lisp
'(("nntpd 1\\.5\\.11t"
- (remove-hook 'nntp-server-opened-hook 'nntp-send-mode-reader)))
+ (remove-hook 'nntp-server-opened-hook
+ 'nntp-send-mode-reader)))
@end lisp
This ensures that Gnus doesn't send the @code{MODE READER} command to
@item nntp-maximum-request
@vindex nntp-maximum-request
-If the @sc{nntp} server doesn't support @sc{nov} headers, this backend
+If the @sc{nntp} server doesn't support @sc{nov} headers, this back end
will collect headers by sending a series of @code{head} commands. To
-speed things up, the backend sends lots of these commands without
+speed things up, the back end sends lots of these commands without
waiting for reply, and then reads all the replies. This is controlled
by the @code{nntp-maximum-request} variable, and is 400 by default. If
your network is buggy, you should set this to 1.
responding properly, or being too loaded to reply within reasonable
time. This is can lead to awkward problems, which can be helped
somewhat by setting @code{nntp-connection-timeout}. This is an integer
-that says how many seconds the @code{nntp} backend should wait for a
+that says how many seconds the @code{nntp} back end should wait for a
connection before giving up. If it is @code{nil}, which is the default,
no timeouts are done.
This hook is run as the last step when connecting to an @sc{nntp}
server.
-@findex nntp-open-rlogin
-@findex nntp-open-telnet
-@findex nntp-open-network-stream
-@item nntp-open-connection-function
-@vindex nntp-open-connection-function
-This function is used to connect to the remote system. Four pre-made
-functions are supplied:
-
-@table @code
-@item nntp-open-network-stream
-This is the default, and simply connects to some port or other on the
-remote system.
-
-@item nntp-open-rlogin
-Does an @samp{rlogin} on the
-remote system, and then does a @samp{telnet} to the @sc{nntp} server
-available there.
-
-@code{nntp-open-rlogin}-related variables:
-
-@table @code
-
-@item nntp-rlogin-program
-@vindex nntp-rlogin-program
-Program used to log in on remote machines. The default is @samp{rsh},
-but @samp{ssh} is a popular alternative.
-
-@item nntp-rlogin-parameters
-@vindex nntp-rlogin-parameters
-This list will be used as the parameter list given to @code{rsh}.
-
-@item nntp-rlogin-user-name
-@vindex nntp-rlogin-user-name
-User name on the remote system.
-
-@end table
-
-@item nntp-open-telnet
-Does a @samp{telnet} to the remote system and then another @samp{telnet}
-to get to the @sc{nntp} server.
-
-@code{nntp-open-telnet}-related variables:
-
-@table @code
-@item nntp-telnet-command
-@vindex nntp-telnet-command
-Command used to start @code{telnet}.
-
-@item nntp-telnet-switches
-@vindex nntp-telnet-switches
-List of strings to be used as the switches to the @code{telnet} command.
-
-@item nntp-telnet-user-name
-@vindex nntp-telnet-user-name
-User name for log in on the remote system.
-
-@item nntp-telnet-passwd
-@vindex nntp-telnet-passwd
-Password to use when logging in.
-
-@item nntp-telnet-parameters
-@vindex nntp-telnet-parameters
-A list of strings executed as a command after logging in
-via @code{telnet}.
-
-@item nntp-telnet-shell-prompt
-@vindex nntp-telnet-shell-prompt
-Regexp matching the shell prompt on the remote machine. The default is
-@samp{bash\\|\$ *\r?$\\|> *\r?}.
-
-@item nntp-open-telnet-envuser
-@vindex nntp-open-telnet-envuser
-If non-@code{nil}, the @code{telnet} session (client and server both)
-will support the @code{ENVIRON} option and not prompt for login name.
-This works for Solaris @code{telnet}, for instance.
-
-@end table
-
-@findex nntp-open-ssl-stream
-@item nntp-open-ssl-stream
-Opens a connection to a server over a @dfn{secure} channel. To use this
-you must have SSLay installed
-(@file{ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL}, and you also need
-@file{ssl.el} (from the W3 distributeion, for instance). You then
-define a server as follows:
-
-@lisp
-;; Type `C-c C-c' after you've finished editing.
-;;
-;; "snews" is port 563 and is predefined in our /etc/services
-;;
-(nntp "snews.bar.com"
- (nntp-open-connection-function nntp-open-ssl-stream)
- (nntp-port-number "snews")
- (nntp-address "snews.bar.com"))
-@end lisp
-
-@end table
-
-@item nntp-end-of-line
-@vindex nntp-end-of-line
-String to use as end-of-line marker when talking to the @sc{nntp}
-server. This is @samp{\r\n} by default, but should be @samp{\n} when
-using @code{rlogin} to talk to the server.
-
-@item nntp-rlogin-user-name
-@vindex nntp-rlogin-user-name
-User name on the remote system when using the @code{rlogin} connect
-function.
-
-@item nntp-address
-@vindex nntp-address
-The address of the remote system running the @sc{nntp} server.
-
-@item nntp-port-number
-@vindex nntp-port-number
-Port number to connect to when using the @code{nntp-open-network-stream}
-connect function.
-
@item nntp-buggy-select
@vindex nntp-buggy-select
Set this to non-@code{nil} if your select routine is buggy.
@item nntp-record-commands
@vindex nntp-record-commands
If non-@code{nil}, @code{nntp} will log all commands it sends to the
-@sc{nntp} server (along with a timestep) in the @samp{*nntp-log*}
+@sc{nntp} server (along with a timestamp) in the @samp{*nntp-log*}
buffer. This is useful if you are debugging a Gnus/@sc{nntp} connection
that doesn't seem to work.
+@item nntp-open-connection-function
+@vindex nntp-open-connection-function
+It is possible to customize how the connection to the nntp server will
+be opened. If you specify an @code{nntp-open-connection-function}
+parameter, Gnus will use that function to establish the connection.
+Five pre-made functions are supplied. These functions can be grouped in
+two categories: direct connection functions (three pre-made), and
+indirect ones (two pre-made).
+
+@item nntp-prepare-post-hook
+@vindex nntp-prepare-post-hook
+A hook run just before posting an article. If there is no
+@code{Message-ID} header in the article and the news server provides the
+recommended ID, it will be added to the article before running this
+hook. It is useful to make @code{Cancel-Lock} headers even if you
+inhibit Gnus to add a @code{Message-ID} header, you could say:
+
+@lisp
+(add-hook 'nntp-prepare-post-hook 'canlock-insert-header)
+@end lisp
+
+Note that not all servers support the recommended ID. This works for
+INN versions 2.3.0 and later, for instance.
+@end table
+
+@menu
+* Direct Functions:: Connecting directly to the server.
+* Indirect Functions:: Connecting indirectly to the server.
+* Common Variables:: Understood by several connection functions.
+@end menu
+
+
+@node Direct Functions
+@subsubsection Direct Functions
+@cindex direct connection functions
+
+These functions are called direct because they open a direct connection
+between your machine and the @sc{nntp} server. The behavior of these
+functions is also affected by commonly understood variables
+(@pxref{Common Variables}).
+
+@table @code
+@findex nntp-open-network-stream
+@item nntp-open-network-stream
+This is the default, and simply connects to some port or other on the
+remote system.
+
+@findex nntp-open-ssl-stream
+@item nntp-open-ssl-stream
+Opens a connection to a server over a @dfn{secure} channel. To use
+this you must have OpenSSL (@uref{http://www.openssl.org}) or SSLeay
+installed (@uref{ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL}, and you also
+need @file{ssl.el} (from the W3 distribution, for instance). You then
+define a server as follows:
+
+@lisp
+;; Type `C-c C-c' after you've finished editing.
+;;
+;; "snews" is port 563 and is predefined in our /etc/services
+;; however, openssl s_client -port doesn't like named ports
+;;
+(nntp "snews.bar.com"
+ (nntp-open-connection-function nntp-open-ssl-stream)
+ (nntp-port-number 563)
+ (nntp-address "snews.bar.com"))
+@end lisp
+
+@findex nntp-open-telnet-stream
+@item nntp-open-telnet-stream
+Opens a connection to an @sc{nntp} server by simply @samp{telnet}'ing
+it. You might wonder why this function exists, since we have the
+default @code{nntp-open-network-stream} which would do the job. (One
+of) the reason(s) is that if you are behind a firewall but have direct
+connections to the outside world thanks to a command wrapper like
+@code{runsocks}, you can use it like this:
+
+@lisp
+(nntp "socksified"
+ (nntp-pre-command "runsocks")
+ (nntp-open-connection-function nntp-open-telnet-stream)
+ (nntp-address "the.news.server"))
+@end lisp
+
+With the default method, you would need to wrap your whole Emacs
+session, which is not a good idea.
+@end table
+
+
+@node Indirect Functions
+@subsubsection Indirect Functions
+@cindex indirect connection functions
+
+These functions are called indirect because they connect to an
+intermediate host before actually connecting to the @sc{nntp} server.
+All of these functions and related variables are also said to belong to
+the "via" family of connection: they're all prefixed with "via" to make
+things cleaner. The behavior of these functions is also affected by
+commonly understood variables (@pxref{Common Variables}).
+
+@table @code
+@item nntp-open-via-rlogin-and-telnet
+@findex nntp-open-via-rlogin-and-telnet
+Does an @samp{rlogin} on a remote system, and then does a @samp{telnet}
+to the real @sc{nntp} server from there. This is useful for instance if
+you need to connect to a firewall machine first.
+
+@code{nntp-open-via-rlogin-and-telnet}-specific variables:
+
+@table @code
+@item nntp-via-rlogin-command
+@vindex nntp-via-rlogin-command
+Command used to log in on the intermediate host. The default is
+@samp{rsh}, but @samp{ssh} is a popular alternative.
+
+@item nntp-via-rlogin-command-switches
+@vindex nntp-via-rlogin-command-switches
+List of strings to be used as the switches to
+@code{nntp-via-rlogin-command}. The default is @code{nil}. If you use
+@samp{ssh} for `nntp-via-rlogin-command', you may set this to
+@samp{("-C")} in order to compress all data connections, otherwise set
+this to @samp{("-t")} or @samp{("-C" "-t")} if the telnet command
+requires a pseudo-tty allocation on an intermediate host.
+@end table
+
+@item nntp-open-via-telnet-and-telnet
+@findex nntp-open-via-telnet-and-telnet
+Does essentially the same, but uses @samp{telnet} instead of
+@samp{rlogin} to connect to the intermediate host.
+
+@code{nntp-open-via-telnet-and-telnet}-specific variables:
+
+@table @code
+@item nntp-via-telnet-command
+@vindex nntp-via-telnet-command
+Command used to @code{telnet} the intermediate host. The default is
+@samp{telnet}.
+
+@item nntp-via-telnet-switches
+@vindex nntp-via-telnet-switches
+List of strings to be used as the switches to the
+@code{nntp-via-telnet-command} command. The default is @samp{("-8")}.
+
+@item nntp-via-user-password
+@vindex nntp-via-user-password
+Password to use when logging in on the intermediate host.
+
+@item nntp-via-envuser
+@vindex nntp-via-envuser
+If non-@code{nil}, the intermediate @code{telnet} session (client and
+server both) will support the @code{ENVIRON} option and not prompt for
+login name. This works for Solaris @code{telnet}, for instance.
+
+@item nntp-via-shell-prompt
+@vindex nntp-via-shell-prompt
+Regexp matching the shell prompt on the intermediate host. The default
+is @samp{bash\\|\$ *\r?$\\|> *\r?}.
+
+@end table
+
+@end table
+
+
+Here are some additional variables that are understood by all the above
+functions:
+
+@table @code
+
+@item nntp-via-user-name
+@vindex nntp-via-user-name
+User name to use when connecting to the intermediate host.
+
+@item nntp-via-address
+@vindex nntp-via-address
+Address of the intermediate host to connect to.
+
+@end table
+
+
+@node Common Variables
+@subsubsection Common Variables
+
+The following variables affect the behavior of all, or several of the
+pre-made connection functions. When not specified, all functions are
+affected.
+
+@table @code
+
+@item nntp-pre-command
+@vindex nntp-pre-command
+A command wrapper to use when connecting through a non native connection
+function (all except @code{nntp-open-network-stream} and
+@code{nntp-open-ssl-stream}. This is where you would put a @samp{SOCKS}
+wrapper for instance.
+
+@item nntp-address
+@vindex nntp-address
+The address of the @sc{nntp} server.
+
+@item nntp-port-number
+@vindex nntp-port-number
+Port number to connect to the @sc{nntp} server. The default is @samp{nntp}.
+If you use @sc{nntp} over @sc{ssl}, you may want to use integer ports rather
+than named ports (i.e, use @samp{563} instead of @samp{snews}), because
+external SSL tools may not work with named ports.
+
+@item nntp-end-of-line
+@vindex nntp-end-of-line
+String to use as end-of-line marker when talking to the @sc{nntp}
+server. This is @samp{\r\n} by default, but should be @samp{\n} when
+using a non native connection function.
+
+@item nntp-telnet-command
+@vindex nntp-telnet-command
+Command to use when connecting to the @sc{nntp} server through
+@samp{telnet}. This is NOT for an intermediate host. This is just for
+the real @sc{nntp} server. The default is @samp{telnet}.
+
+@item nntp-telnet-switches
+@vindex nntp-telnet-switches
+A list of switches to pass to @code{nntp-telnet-command}. The default
+is @samp{("-8")}.
+
@end table
contain very big articles---@samp{alt.binaries.pictures.furniture}, for
instance.
-Anyways, you just specify @code{nnspool} as the method and @code{""} (or
+Anyway, you just specify @code{nnspool} as the method and @code{""} (or
anything else) as the address.
If you have access to a local spool, you should probably use that as the
@item nnspool-active-file
@vindex nnspool-active-file
-The path to the active file.
+The name of the active file.
@item nnspool-newsgroups-file
@vindex nnspool-newsgroups-file
-The path to the group descriptions file.
+The name of the group descriptions file.
@item nnspool-history-file
@vindex nnspool-history-file
-The path to the news history file.
+The name of the news history file.
@item nnspool-active-times-file
@vindex nnspool-active-times-file
-The path to the active date file.
+The name of the active date file.
@item nnspool-nov-is-evil
@vindex nnspool-nov-is-evil
course.
@menu
-* Mail in a Newsreader:: Important introductory notes.
-* Getting Started Reading Mail:: A simple cookbook example.
-* Splitting Mail:: How to create mail groups.
-* Mail Sources:: How to tell Gnus where to get mail from.
-* Mail Backend Variables:: Variables for customizing mail handling.
-* Fancy Mail Splitting:: Gnus can do hairy splitting of incoming mail.
-* Incorporating Old Mail:: What about the old mail you have?
-* Expiring Mail:: Getting rid of unwanted mail.
-* Washing Mail:: Removing gruft from the mail you get.
-* Duplicates:: Dealing with duplicated mail.
-* Not Reading Mail:: Using mail backends for reading other files.
-* Choosing a Mail Backend:: Gnus can read a variety of mail formats.
+* Mail in a Newsreader:: Important introductory notes.
+* Getting Started Reading Mail:: A simple cookbook example.
+* Splitting Mail:: How to create mail groups.
+* Mail Sources:: How to tell Gnus where to get mail from.
+* Mail Back End Variables:: Variables for customizing mail handling.
+* Fancy Mail Splitting:: Gnus can do hairy splitting of incoming mail.
+* Group Mail Splitting:: Use group customize to drive mail splitting.
+* Incorporating Old Mail:: What about the old mail you have?
+* Expiring Mail:: Getting rid of unwanted mail.
+* Washing Mail:: Removing gruft from the mail you get.
+* Duplicates:: Dealing with duplicated mail.
+* Not Reading Mail:: Using mail back ends for reading other files.
+* Choosing a Mail Back End:: Gnus can read a variety of mail formats.
@end menu
@node Mail in a Newsreader
@subsection Mail in a Newsreader
-If you are used to traditional mail readers, but have decided to switch
+If you are used to traditional mail readers, but have decided to switch
to reading mail with Gnus, you may find yourself experiencing something
of a culture shock.
-Gnus does not behave like traditional mail readers. If you want to make
+Gnus does not behave like traditional mail readers. If you want to make
it behave that way, you can, but it's an uphill battle.
-Gnus, by default, handles all its group using the same approach. This
+Gnus, by default, handles all its groups using the same approach. This
approach is very newsreaderly---you enter a group, see the new/unread
messages, and when you read the messages, they get marked as read, and
you don't see them any more. (Unless you explicitly ask for them.)
deleted? How awful!
But, no, it means that old messages are @dfn{expired} according to some
-scheme or other. For news messages, the expire process is controlled by
+scheme or other. For news messages, the expire process is controlled by
the news administrator; for mail, the expire process is controlled by
you. The expire process for mail is covered in depth in @pxref{Expiring
Mail}.
What many Gnus users find, after using it a while for both news and
-mail, is that the transport becomes more and more irrelevant. What
-becomes important is the size of the receiving audience.
+mail, is that the transport mechanism has very little to do with how
+they want to treat a message.
Many people subscribe to several mailing lists. These are transported
-via SMTP, and are therefore mail. Some people have local news groups
-which have only a handful of readers. These are transported via NNTP,
-and are therefore news.
+via @sc{smtp}, and are therefore mail. But we might go for weeks without
+answering, or even reading these messages very carefully. We may not
+need to save them because if we should need to read one again, they are
+archived somewhere else.
+
+Some people have local news groups which have only a handful of readers.
+These are transported via @sc{nntp}, and are therefore news. But we may need
+to read and answer a large fraction of the messages very carefully in
+order to do our work. And there may not be an archive, so we may need
+to save the interesting messages the same way we would personal mail.
The important distinction turns out to be not the transport mechanism,
-but whether the messages are @dfn{personal} or @dfn{public}. Many users
-then subtly alter the behavior of Gnus according to these two
-categories.
+but other factors such as how interested we are in the subject matter,
+or how easy it is to retrieve the message if we need to read it again.
+
+Gnus provides many options for sorting mail into ``groups'' which behave
+like newsgroups, and for treating each group (whether mail or news)
+differently.
Some users never get comfortable using the Gnus (ahem) paradigm and wish
that Gnus should grow up and be a male, er, mail reader. It is possible
@subsection Getting Started Reading Mail
It's quite easy to use Gnus to read your new mail. You just plonk the
-mail backend of your choice into @code{gnus-secondary-select-methods},
+mail back end of your choice into @code{gnus-secondary-select-methods},
and things will happen automatically.
For instance, if you want to use @code{nnml} (which is a "one file per
-mail" backend), you could put the following in your @file{.gnus} file:
+mail" back end), you could put the following in your @file{.gnus.el} file:
@lisp
-(setq gnus-secondary-select-methods
- '((nnml "private")))
+(setq gnus-secondary-select-methods '((nnml "")))
@end lisp
-Now, the next time you start Gnus, this backend will be queried for new
+Now, the next time you start Gnus, this back end will be queried for new
articles, and it will move all the messages in your spool file to its
directory, which is @code{~/Mail/} by default. The new group that will
be created (@samp{mail.misc}) will be subscribed, and you can read it
This should be sufficient for reading mail with Gnus. You might want to
give the other sections in this part of the manual a perusal, though.
-Especially @pxref{Choosing a Mail Backend} and @pxref{Expiring Mail}.
+Especially @pxref{Choosing a Mail Back End} and @pxref{Expiring Mail}.
@node Splitting Mail
message. The function should return a list of group names that it
thinks should carry this mail message.
-Note that the mail backends are free to maul the poor, innocent,
+Note that the mail back ends are free to maul the poor, innocent,
incoming headers all they want to. They all add @code{Lines} headers;
some add @code{X-Gnus-Group} headers; most rename the Unix mbox
@code{From<SPACE>} line to something else.
@vindex nnmail-crosspost
-The mail backends all support cross-posting. If several regexps match,
+The mail back ends all support cross-posting. If several regexps match,
the mail will be ``cross-posted'' to all those groups.
@code{nnmail-crosspost} says whether to use this mechanism or not. Note
that no articles are crossposted to the general (@samp{}) group.
@kindex M-x nnmail-split-history
@kindex nnmail-split-history
If you wish to see where the previous mail split put the messages, you
-can use the @kbd{M-x nnmail-split-history} command.
+can use the @kbd{M-x nnmail-split-history} command. If you wish to see
+where re-spooling messages would put the messages, you can use
+@code{gnus-summary-respool-trace} and related commands (@pxref{Mail
+Group Commands}).
+
+@vindex nnmail-split-header-length-limit
+Header lines longer than the value of
+@code{nnmail-split-header-length-limit} are excluded from the split
+function.
+
+@vindex nnmail-mail-splitting-charset
+@vindex nnmail-mail-splitting-decodes
+By default the splitting codes MIME decodes headers so you can match
+on non-ASCII strings. The @code{nnmail-mail-splitting-charset}
+variable specifies the default charset for decoding. The behaviour
+can be turned off completely by binding
+@code{nnmail-mail-splitting-decodes} to nil, which is useful if you
+want to match articles based on the raw header data.
+
+@vindex nnmail-resplit-incoming
+By default, splitting is performed on all incoming messages. If
+you specify a @code{directory} entry for the variable
+@code{mail-sources} @pxref{Mail Source Specifiers}, however, then
+splitting does @emph{not} happen by default. You can set the variable
+@code{nnmail-resplit-incoming} to a non-nil value to make splitting
+happen even in this case. (This variable has no effect on other kinds
+of entries.)
Gnus gives you all the opportunity you could possibly want for shooting
yourself in the foot. Let's say you create a group that will contain
@subsection Mail Sources
Mail can be gotten from many different sources---the mail spool, from a
-POP mail server, or from a procmail directory, for instance.
+POP mail server, from a procmail directory, or from a maildir, for
+instance.
@menu
-* Mail Source Specifiers:: How to specify what a mail source is.
-* Mail Source Customization:: Some variables that influence things.
-* Fetching Mail:: Using the mail source specifiers.
+* Mail Source Specifiers:: How to specify what a mail source is.
+* Mail Source Customization:: Some variables that influence things.
+* Fetching Mail:: Using the mail source specifiers.
@end menu
@cindex mail spool
@cindex mail source
-You tell Gnus how to fetch mail by creating a @dfn{mail source
-specifier}.
+You tell Gnus how to fetch mail by setting @code{mail-sources}
+(@pxref{Fetching Mail}) to a @dfn{mail source specifier}.
Here's an example:
@table @code
@item :path
-The path of the file. Defaults to the value of the @code{MAIL}
-environment variable or @file{/usr/mail/spool/user-name}.
+The file name. Defaults to the value of the @code{MAIL}
+environment variable or the value of @code{rmail-spool-directory}
+(usually something like @file{/usr/mail/spool/user-name}).
@end table
An example file mail source:
(file :path "/usr/spool/mail/user-name")
@end lisp
-Or using the default path:
+Or using the default file name:
@lisp
(file)
@end lisp
-@item directory
-Get mail from several files in a directory. This is typically used when
-you have procmail split the incoming mail into several files.
+If the mail spool file is not located on the local machine, it's best to
+use POP or @sc{imap} or the like to fetch the mail. You can not use ange-ftp
+file names here---it has no way to lock the mail spool while moving the
+mail.
-Keywords:
+If it's impossible to set up a proper server, you can use ssh instead.
-@table @code
-@item :path
-The path of the directory where the files are. There is no default
-value.
+@lisp
+(setq mail-sources
+ '((file :prescript "ssh host bin/getmail >%t")))
+@end lisp
-@item :suffix
+The @samp{getmail} script would look something like the following:
+
+@example
+#!/bin/sh
+# getmail - move mail from spool to stdout
+# flu@@iki.fi
+
+MOVEMAIL=/usr/lib/emacs/20.3/i386-redhat-linux/movemail
+TMP=$HOME/Mail/tmp
+rm -f $TMP; $MOVEMAIL $MAIL $TMP >/dev/null && cat $TMP
+@end example
+
+Alter this script to fit find the @samp{movemail} you want to use.
+
+
+@item directory
+@vindex nnmail-scan-directory-mail-source-once
+Get mail from several files in a directory. This is typically used when
+you have procmail split the incoming mail into several files. That is,
+there is a one-to-one correspondence between files in that directory and
+groups, so that mail from the file @file{foo.bar.spool} will be put in
+the group @code{foo.bar}. (You can change the suffix to be used instead
+of @code{.spool}.) Setting
+@code{nnmail-scan-directory-mail-source-once} to non-nil forces Gnus to
+scan the mail source only once. This is particularly useful if you want
+to scan mail groups at a specified level.
+
+@vindex nnmail-resplit-incoming
+There is also the variable @code{nnmail-resplit-incoming}, if you set
+that to a non-nil value, then the normal splitting process is applied
+to all the files from the directory, @ref{Splitting Mail}.
+
+Keywords:
+
+@table @code
+@item :path
+The name of the directory where the files are. There is no default
+value.
+
+@item :suffix
Only files ending with this suffix are used. The default is
@samp{.spool}.
@code{MAILHOST} environment variable.
@item :port
-The port number of the POP server. The default is @samp{pop3}.
+The port number of the POP server. This can be a number (eg,
+@samp{:port 1234}) or a string (eg, @samp{:port "pop3"}). If it is a
+string, it should be a service name as listed in @file{/etc/services} on
+Unix systems. The default is @samp{"pop3"}. On some systems you might
+need to specify it as @samp{"pop-3"} instead.
@item :user
The user name to give to the POP server. The default is the login
prompted.
@item :program
-The program to use to fetch mail from the POP server. This is should be
+The program to use to fetch mail from the POP server. This should be
a @code{format}-like string. Here's an example:
@example
@end lisp
@item maildir
-Get mail from a maildir. This is a type of mailbox currently only
-supported by qmail, where each file in a special directory contains
-exactly one mail.
+Get mail from a maildir. This is a type of mailbox that is supported by
+at least qmail and postfix, where each file in a special directory
+contains exactly one mail.
Keywords:
@table @code
@item :path
-The path of the directory where the mails are stored. The default is
-@samp{~/Maildir/new}.
+The name of the directory where the mails are stored. The default is
+taken from the @code{MAILDIR} environment variable or
+@samp{~/Maildir/}.
+@item :subdirs
+The subdirectories of the Maildir. The default is
+@samp{("new" "cur")}.
+
+@c If you sometimes look at your mail through a pop3 daemon before fetching
+@c them with Gnus, you may also have to fetch your mails from the
+@c @code{cur} directory inside the maildir, like in the first example
+@c below.
+
+You can also get mails from remote hosts (because maildirs don't suffer
+from locking problems).
+
+@end table
+
+Two example maildir mail sources:
+
+@lisp
+(maildir :path "/home/user-name/Maildir/"
+ :subdirs ("cur" "new"))
+@end lisp
+
+@lisp
+(maildir :path "/user@@remotehost.org:~/Maildir/"
+ :subdirs ("new"))
+@end lisp
+
+@item imap
+Get mail from a @sc{imap} server. If you don't want to use @sc{imap}
+as intended, as a network mail reading protocol (ie with nnimap), for
+some reason or other, Gnus let you treat it similar to a POP server
+and fetches articles from a given @sc{imap} mailbox. @xref{IMAP}, for
+more information.
+
+Note that for the Kerberos, GSSAPI, SSL/TLS and STARTTLS support you
+may need external programs and libraries, @xref{IMAP}.
+
+Keywords:
+
+@table @code
+@item :server
+The name of the @sc{imap} server. The default is taken from the
+@code{MAILHOST} environment variable.
+
+@item :port
+The port number of the @sc{imap} server. The default is @samp{143}, or
+@samp{993} for SSL/TLS connections.
+
+@item :user
+The user name to give to the @sc{imap} server. The default is the login
+name.
+
+@item :password
+The password to give to the @sc{imap} server. If not specified, the user is
+prompted.
+
+@item :stream
+What stream to use for connecting to the server, this is one of the
+symbols in @code{imap-stream-alist}. Right now, this means
+@samp{gssapi}, @samp{kerberos4}, @samp{starttls}, @samp{ssl},
+@samp{shell} or the default @samp{network}.
+
+@item :authentication
+Which authenticator to use for authenticating to the server, this is
+one of the symbols in @code{imap-authenticator-alist}. Right now,
+this means @samp{gssapi}, @samp{kerberos4}, @samp{digest-md5},
+@samp{cram-md5}, @samp{anonymous} or the default @samp{login}.
+
+@item :program
+When using the `shell' :stream, the contents of this variable is
+mapped into the `imap-shell-program' variable. This should be a
+@code{format}-like string (or list of strings). Here's an example:
+
+@example
+ssh %s imapd
+@end example
+
+The valid format specifier characters are:
+
+@table @samp
+@item s
+The name of the server.
+
+@item l
+User name from `imap-default-user'.
+
+@item p
+The port number of the server.
+@end table
+
+The values used for these specs are taken from the values you give the
+corresponding keywords.
+
+@item :mailbox
+The name of the mailbox to get mail from. The default is @samp{INBOX}
+which normally is the mailbox which receive incoming mail.
+
+@item :predicate
+The predicate used to find articles to fetch. The default, @samp{UNSEEN
+UNDELETED}, is probably the best choice for most people, but if you
+sometimes peek in your mailbox with a @sc{imap} client and mark some
+articles as read (or; SEEN) you might want to set this to @samp{1:*}.
+Then all articles in the mailbox is fetched, no matter what. For a
+complete list of predicates, see RFC 2060 section 6.4.4.
+
+@item :fetchflag
+How to flag fetched articles on the server, the default @samp{\Deleted}
+will mark them as deleted, an alternative would be @samp{\Seen} which
+would simply mark them as read. These are the two most likely choices,
+but more flags are defined in RFC 2060 section 2.3.2.
+
+@item :dontexpunge
+If non-nil, don't remove all articles marked as deleted in the mailbox
+after finishing the fetch.
+
+@end table
+
+An example @sc{imap} mail source:
+
+@lisp
+(imap :server "mail.mycorp.com"
+ :stream kerberos4
+ :fetchflag "\\Seen")
+@end lisp
+
+@item webmail
+Get mail from a webmail server, such as @uref{www.hotmail.com},
+@uref{webmail.netscape.com}, @uref{www.netaddress.com},
+@uref{mail.yahoo..com}.
+
+NOTE: Webmail largely depends cookies. A "one-line-cookie" patch is
+required for url "4.0pre.46".
+
+WARNING: Mails may be lost. NO WARRANTY.
-If you sometimes look at your mail through a pop3 daemon before fetching
-them with Gnus, you may also have to fetch your mails from the
-@code{cur} directory inside the maildir, like in the following example.
+Keywords:
+
+@table @code
+@item :subtype
+The type of the webmail server. The default is @code{hotmail}. The
+alternatives are @code{netscape}, @code{netaddress}, @code{my-deja}.
+
+@item :user
+The user name to give to the webmail server. The default is the login
+name.
+
+@item :password
+The password to give to the webmail server. If not specified, the user is
+prompted.
+
+@item :dontexpunge
+If non-nil, only fetch unread articles and don't move them to trash
+folder after finishing the fetch.
+
+@end table
+An example webmail source:
+
+@lisp
+(webmail :subtype 'hotmail
+ :user "user-name"
+ :password "secret")
+@end lisp
@end table
-An example maildir mail source:
+@table @dfn
+@item Common Keywords
+Common keywords can be used in any type of mail source.
+
+Keywords:
+
+@table @code
+@item :plugged
+If non-nil, fetch the mail even when Gnus is unplugged. If you use
+directory source to get mail, you can specify it as in this example:
@lisp
-(maildir :path "/home/user-name/Maildir/cur")
+(setq mail-sources
+ '((directory :path "/home/pavel/.Spool/"
+ :suffix ""
+ :plugged t)))
@end lisp
+Gnus will then fetch your mail even when you are unplugged. This is
+useful when you use local mail and news.
+
@end table
+@end table
+
+@subsubsection Function Interface
+
+Some of the above keywords specify a Lisp function to be executed.
+For each keyword @code{:foo}, the Lisp variable @code{foo} is bound to
+the value of the keyword while the function is executing. For example,
+consider the following mail-source setting:
+
+@lisp
+(setq mail-sources '((pop :user "jrl"
+ :server "pophost" :function fetchfunc)))
+@end lisp
+
+While the function @code{fetchfunc} is executing, the symbol @code{user}
+is bound to @code{"jrl"}, and the symbol @code{server} is bound to
+@code{"pophost"}. The symbols @code{port}, @code{password},
+@code{program}, @code{prescript}, @code{postscript}, @code{function},
+and @code{authentication} are also bound (to their default values).
+
+See above for a list of keywords for each type of mail source.
@node Mail Source Customization
variables.
@table @code
-@item mail-source-movemail-program
-@vindex mail-source-movemail-program
-A command to be executed to move mail from the inbox. The default is
-@samp{movemail}.
-
-This can also be a function. In that case, the function will be
-called with two parameters -- the name of the INBOX file, and the file
-to be moved to.
-
-@item mail-source-movemail-args
-@vindex mail-source-movemail-args
-Extra arguments to give to the command described above.
-
@item mail-source-crash-box
@vindex mail-source-crash-box
File where mail will be stored while processing it. The default is
where the incoming files will be stored if the previous variable is
@code{nil}.
+@item mail-source-incoming-file-prefix
+@vindex mail-source-incoming-file-prefix
+Prefix for file name for storing incoming mail. The default is
+@file{Incoming}, in which case files will end up with names like
+@file{Incoming30630D_} or @file{Incoming298602ZD}. This is really only
+relevant if @code{mail-source-delete-incoming} is @code{nil}.
+
@item mail-source-default-file-modes
@vindex mail-source-default-file-modes
All new mail files will get this file mode. The default is 384.
+@item mail-source-movemail-program
+@vindex mail-source-movemail-program
+If non-nil, name of program for fetching new mail. If nil,
+@code{movemail} in @var{exec-directory}.
+
@end table
(@pxref{Mail Source Specifiers}).
If this variable (and the obsolescent @code{nnmail-spool-file}) is
-@code{nil}, the mail backends will never attempt to fetch mail by
+@code{nil}, the mail back ends will never attempt to fetch mail by
themselves.
If you want to fetch mail both from your local spool as well as a POP
@end lisp
-When you use a mail backend, Gnus will slurp all your mail from your
+When you use a mail back end, Gnus will slurp all your mail from your
inbox and plonk it down in your home directory. Gnus doesn't move any
-mail if you're not using a mail backend---you have to do a lot of magic
+mail if you're not using a mail back end---you have to do a lot of magic
invocations first. At the time when you have finished drawing the
pentagram, lightened the candles, and sacrificed the goat, you really
shouldn't be too surprised when Gnus moves your mail.
-@node Mail Backend Variables
-@subsection Mail Backend Variables
+@node Mail Back End Variables
+@subsection Mail Back End Variables
These variables are (for the most part) pertinent to all the various
-mail backends.
+mail back ends.
@table @code
@vindex nnmail-read-incoming-hook
@item nnmail-read-incoming-hook
-The mail backends all call this hook after reading new mail. You can
+The mail back ends all call this hook after reading new mail. You can
use this hook to notify any mail watch programs, if you want to.
@vindex nnmail-split-hook
@item nnmail-split-hook
@findex article-decode-encoded-words
-@findex RFC1522 decoding
-@findex RFC2047 decoding
+@findex RFC 1522 decoding
+@findex RFC 2047 decoding
Hook run in the buffer where the mail headers of each message is kept
just before the splitting based on these headers is done. The hook is
free to modify the buffer contents in any way it sees fit---the buffer
default file modes the new mail files get:
@lisp
-(add-hook 'gnus-pre-get-new-mail-hook
+(add-hook 'nnmail-pre-get-new-mail-hook
(lambda () (set-default-file-modes 511)))
-(add-hook 'gnus-post-get-new-mail-hook
+(add-hook 'nnmail-post-get-new-mail-hook
(lambda () (set-default-file-modes 551)))
@end lisp
@item nnmail-use-long-file-names
@vindex nnmail-use-long-file-names
-If non-@code{nil}, the mail backends will use long file and directory
+If non-@code{nil}, the mail back ends will use long file and directory
names. Groups like @samp{mail.misc} will end up in directories
-(assuming use of @code{nnml} backend) or files (assuming use of
-@code{nnfolder} backend) like @file{mail.misc}. If it is @code{nil},
+(assuming use of @code{nnml} back end) or files (assuming use of
+@code{nnfolder} back end) like @file{mail.misc}. If it is @code{nil},
the same group will end up in @file{mail/misc}.
@item nnmail-delete-file-function
@item nnmail-cache-accepted-message-ids
@vindex nnmail-cache-accepted-message-ids
If non-@code{nil}, put the @code{Message-ID}s of articles imported into
-the backend (via @code{Gcc}, for instance) into the mail duplication
+the back end (via @code{Gcc}, for instance) into the mail duplication
discovery cache. The default is @code{nil}.
+@item nnmail-cache-ignore-groups
+@vindex nnmail-cache-ignore-groups
+This can be a regular expression or a list of regular expressions.
+Group names that match any of the regular expressions will never be
+recorded in the @code{Message-ID} cache.
+
+This can be useful, for example, when using Fancy Splitting
+(@pxref{Fancy Mail Splitting}) together with the function
+@code{nnmail-split-fancy-with-parent}.
+
@end table
;; Other mailing lists...
(any "procmail@@informatik\\.rwth-aachen\\.de" "procmail.list")
(any "SmartList@@informatik\\.rwth-aachen\\.de" "SmartList.list")
+ ;; Both lists below have the same suffix, so prevent
+ ;; cross-posting to mkpkg.list of messages posted only to
+ ;; the bugs- list, but allow cross-posting when the
+ ;; message was really cross-posted.
+ (any "bugs-mypackage@@somewhere" "mypkg.bugs")
+ (any "mypackage@@somewhere\" - "bugs-mypackage" "mypkg.list")
;; People...
(any "larsi@@ifi\\.uio\\.no" "people.Lars_Magne_Ingebrigtsen"))
;; Unmatched mail goes to the catch all group.
examples.
@item
-@var{(FIELD VALUE SPLIT)}: If the split is a list, the first element of
-which is a string, then store the message as specified by SPLIT, if
-header FIELD (a regexp) contains VALUE (also a regexp).
+@code{(@var{field} @var{value} @code{[-} @var{restrict}
+@code{[@dots{}]}@code{]} @var{split})}: If the split is a list, the
+first element of which is a string, then store the message as
+specified by @var{split}, if header @var{field} (a regexp) contains
+@var{value} (also a regexp). If @var{restrict} (yet another regexp)
+matches some string after @var{field} and before the end of the
+matched @var{value}, the @var{split} is ignored. If none of the
+@var{restrict} clauses match, @var{split} is processed.
@item
-@var{(| SPLIT...)}: If the split is a list, and the first element is
-@code{|} (vertical bar), then process each SPLIT until one of them
-matches. A SPLIT is said to match if it will cause the mail message to
-be stored in one or more groups.
+@code{(| @var{split}@dots{})}: If the split is a list, and the first
+element is @code{|} (vertical bar), then process each @var{split} until
+one of them matches. A @var{split} is said to match if it will cause
+the mail message to be stored in one or more groups.
@item
-@var{(& SPLIT...)}: If the split is a list, and the first element is
-@code{&}, then process all SPLITs in the list.
+@code{(& @var{split}@dots{})}: If the split is a list, and the first
+element is @code{&}, then process all @var{split}s in the list.
@item
@code{junk}: If the split is the symbol @code{junk}, then don't save
-this message. Use with extreme caution.
+(i.e., delete) this message. Use with extreme caution.
@item
-@var{(: function arg1 arg2 ...)}: If the split is a list, and the first
-element is @code{:}, then the second element will be called as a
-function with @var{args} given as arguments. The function should return
-a SPLIT.
+@code{(: @var{function} @var{arg1} @var{arg2} @dots{})}: If the split is
+a list, and the first element is @code{:}, then the second element will
+be called as a function with @var{args} given as arguments. The
+function should return a @var{split}.
+
+@cindex body split
+For instance, the following function could be used to split based on the
+body of the messages:
+
+@lisp
+(defun split-on-body ()
+ (save-excursion
+ (set-buffer " *nnmail incoming*")
+ (goto-char (point-min))
+ (when (re-search-forward "Some.*string" nil t)
+ "string.group")))
+@end lisp
+
+The @samp{" *nnmail incoming*"} is narrowed to the message in question
+when the @code{:} function is run.
@item
-@var{(! FUNC SPLIT)}: If the split is a list, and the first element
-is @code{!}, then SPLIT will be processed, and FUNC will be called as a
-function with the result of SPLIT as argument. FUNC should return a split.
+@code{(! @var{func} @var{split})}: If the split is a list, and the first
+element is @code{!}, then SPLIT will be processed, and FUNC will be
+called as a function with the result of SPLIT as argument. FUNC should
+return a split.
@item
@code{nil}: If the split is @code{nil}, it is ignored.
@end enumerate
-In these splits, @var{FIELD} must match a complete field name.
-@var{VALUE} must match a complete word according to the fundamental mode
+In these splits, @var{field} must match a complete field name.
+@var{value} must match a complete word according to the fundamental mode
syntax table. You can use @code{.*} in the regexps to match partial
-field names or words. In other words, all @var{VALUE}'s are wrapped in
+field names or words. In other words, all @var{value}'s are wrapped in
@samp{\<} and @samp{\>} pairs.
@vindex nnmail-split-abbrev-alist
-@var{FIELD} and @var{VALUE} can also be lisp symbols, in that case they
+@var{field} and @var{value} can also be lisp symbols, in that case they
are expanded as specified by the variable
@code{nnmail-split-abbrev-alist}. This is an alist of cons cells, where
the @code{car} of a cell contains the key, and the @code{cdr} contains the associated
up to @samp{\\9} will be substituted with the text matched by the
groupings 1 through 9.
+@findex nnmail-split-fancy-with-parent
+@code{nnmail-split-fancy-with-parent} is a function which allows you to
+split followups into the same groups their parents are in. Sometimes
+you can't make splitting rules for all your mail. For example, your
+boss might send you personal mail regarding different projects you are
+working on, and as you can't tell your boss to put a distinguishing
+string into the subject line, you have to resort to manually moving the
+messages into the right group. With this function, you only have to do
+it once per thread.
+
+To use this feature, you have to set @code{nnmail-treat-duplicates} and
+@code{nnmail-cache-accepted-message-ids} to a non-nil value. And then
+you can include @code{nnmail-split-fancy-with-parent} using the colon
+feature, like so:
+@lisp
+(setq nnmail-treat-duplicates 'warn ; or 'delete
+ nnmail-cache-accepted-message-ids t
+ nnmail-split-fancy
+ '(| (: nnmail-split-fancy-with-parent)
+ ;; other splits go here
+ ))
+@end lisp
+
+This feature works as follows: when @code{nnmail-treat-duplicates} is
+non-nil, Gnus records the message id of every message it sees in the
+file specified by the variable @code{nnmail-message-id-cache-file},
+together with the group it is in (the group is omitted for non-mail
+messages). When mail splitting is invoked, the function
+@code{nnmail-split-fancy-with-parent} then looks at the References (and
+In-Reply-To) header of each message to split and searches the file
+specified by @code{nnmail-message-id-cache-file} for the message ids.
+When it has found a parent, it returns the corresponding group name
+unless the group name matches the regexp
+@code{nnmail-split-fancy-with-parent-ignore-groups}. It is recommended
+that you set @code{nnmail-message-id-cache-length} to a somewhat higher
+number than the default so that the message ids are still in the cache.
+(A value of 5000 appears to create a file some 300 kBytes in size.)
+@vindex nnmail-cache-accepted-message-ids
+When @code{nnmail-cache-accepted-message-ids} is non-@code{nil}, Gnus
+also records the message ids of moved articles, so that the followup
+messages goes into the new group.
+
+Also see the variable @code{nnmail-cache-ignore-groups} if you don't
+want certain groups to be recorded in the cache. For example, if all
+outgoing messages are written to an `outgoing' group, you could set
+@code{nnmail-cache-ignore-groups} to match that group name.
+Otherwise, answers to all your messages would end up in the
+`outgoing' group.
+
+
+@node Group Mail Splitting
+@subsection Group Mail Splitting
+@cindex mail splitting
+@cindex group mail splitting
+
+@findex gnus-group-split
+If you subscribe to dozens of mailing lists but you don't want to
+maintain mail splitting rules manually, group mail splitting is for you.
+You just have to set @var{to-list} and/or @var{to-address} in group
+parameters or group customization and set @code{nnmail-split-methods} to
+@code{gnus-group-split}. This splitting function will scan all groups
+for those parameters and split mail accordingly, i.e., messages posted
+from or to the addresses specified in the parameters @var{to-list} or
+@var{to-address} of a mail group will be stored in that group.
+
+Sometimes, mailing lists have multiple addresses, and you may want mail
+splitting to recognize them all: just set the @var{extra-aliases} group
+parameter to the list of additional addresses and it's done. If you'd
+rather use a regular expression, set @var{split-regexp}.
+
+All these parameters in a group will be used to create an
+@code{nnmail-split-fancy} split, in which the @var{field} is @samp{any},
+the @var{value} is a single regular expression that matches
+@var{to-list}, @var{to-address}, all of @var{extra-aliases} and all
+matches of @var{split-regexp}, and the @var{split} is the name of the
+group. @var{restrict}s are also supported: just set the
+@var{split-exclude} parameter to a list of regular expressions.
+
+If you can't get the right split to be generated using all these
+parameters, or you just need something fancier, you can set the
+parameter @var{split-spec} to an @code{nnmail-split-fancy} split. In
+this case, all other aforementioned parameters will be ignored by
+@code{gnus-group-split}. In particular, @var{split-spec} may be set to
+@code{nil}, in which case the group will be ignored by
+@code{gnus-group-split}.
+
+@vindex gnus-group-split-default-catch-all-group
+@code{gnus-group-split} will do cross-posting on all groups that match,
+by defining a single @code{&} fancy split containing one split for each
+group. If a message doesn't match any split, it will be stored in the
+group named in @code{gnus-group-split-default-catch-all-group}, unless
+some group has @var{split-spec} set to @code{catch-all}, in which case
+that group is used as the catch-all group. Even though this variable is
+often used just to name a group, it may also be set to an arbitrarily
+complex fancy split (after all, a group name is a fancy split), and this
+may be useful to split mail that doesn't go to any mailing list to
+personal mail folders. Note that this fancy split is added as the last
+element of a @code{|} split list that also contains a @code{&} split
+with the rules extracted from group parameters.
+
+It's time for an example. Assume the following group parameters have
+been defined:
+
+@example
+nnml:mail.bar:
+((to-address . "bar@@femail.com")
+ (split-regexp . ".*@@femail\\.com"))
+nnml:mail.foo:
+((to-list . "foo@@nowhere.gov")
+ (extra-aliases "foo@@localhost" "foo-redist@@home")
+ (split-exclude "bugs-foo" "rambling-foo")
+ (admin-address . "foo-request@@nowhere.gov"))
+nnml:mail.others:
+((split-spec . catch-all))
+@end example
+
+Setting @code{nnmail-split-methods} to @code{gnus-group-split} will
+behave as if @code{nnmail-split-fancy} had been selected and variable
+@code{nnmail-split-fancy} had been set as follows:
+
+@lisp
+(| (& (any "\\(bar@@femail\\.com\\|.*@@femail\\.com\\)" "mail.bar")
+ (any "\\(foo@@nowhere\\.gov\\|foo@@localhost\\|foo-redist@@home\\)"
+ - "bugs-foo" - "rambling-foo" "mail.foo"))
+ "mail.others")
+@end lisp
+
+@findex gnus-group-split-fancy
+If you'd rather not use group splitting for all your mail groups, you
+may use it for only some of them, by using @code{nnmail-split-fancy}
+splits like this:
+
+@lisp
+(: gnus-group-split-fancy GROUPS NO-CROSSPOST CATCH-ALL)
+@end lisp
+
+@var{groups} may be a regular expression or a list of group names whose
+parameters will be scanned to generate the output split.
+@var{no-crosspost} can be used to disable cross-posting; in this case, a
+single @code{|} split will be output. @var{catch-all} is the fallback
+fancy split, used like @var{gnus-group-split-default-catch-all-group}.
+If @var{catch-all} is @code{nil}, or if @var{split-regexp} matches the
+empty string in any selected group, no catch-all split will be issued.
+Otherwise, if some group has @var{split-spec} set to @code{catch-all},
+this group will override the value of the @var{catch-all} argument.
+
+@findex gnus-group-split-setup
+Unfortunately, scanning all groups and their parameters can be quite
+slow, especially considering that it has to be done for every message.
+But don't despair! The function @code{gnus-group-split-setup} can be
+used to enable @code{gnus-group-split} in a much more efficient way. It
+sets @code{nnmail-split-methods} to @code{nnmail-split-fancy} and sets
+@code{nnmail-split-fancy} to the split produced by
+@code{gnus-group-split-fancy}. Thus, the group parameters are only
+scanned once, no matter how many messages are split.
+
+@findex gnus-group-split-update
+However, if you change group parameters, you'd have to update
+@code{nnmail-split-fancy} manually. You can do it by running
+@code{gnus-group-split-update}. If you'd rather have it updated
+automatically, just tell @code{gnus-group-split-setup} to do it for
+you. For example, add to your @file{.gnus.el}:
+
+@lisp
+(gnus-group-split-setup AUTO-UPDATE CATCH-ALL)
+@end lisp
+
+If @var{auto-update} is non-@code{nil}, @code{gnus-group-split-update}
+will be added to @code{nnmail-pre-get-new-mail-hook}, so you won't ever
+have to worry about updating @code{nnmail-split-fancy} again. If you
+don't omit @var{catch-all} (it's optional, equivalent to @code{nil}),
+@code{gnus-group-split-default-catch-all-group} will be set to its
+value.
+
+@vindex gnus-group-split-updated-hook
+Because you may want to change @code{nnmail-split-fancy} after it is set
+by @code{gnus-group-split-update}, this function will run
+@code{gnus-group-split-updated-hook} just before finishing.
@node Incorporating Old Mail
@subsection Incorporating Old Mail
+@cindex incorporating old mail
+@cindex import old mail
Most people have lots of old mail stored in various file formats. If
you have set up Gnus to read mail using one of the spiffy Gnus mail
-backends, you'll probably wish to have that old mail incorporated into
+back ends, you'll probably wish to have that old mail incorporated into
your mail groups.
Doing so can be quite easy.
Go to the group buffer.
@item
-Type `G f' and give the path to the mbox file when prompted to create an
+Type @kbd{G f} and give the file name to the mbox file when prompted to create an
@code{nndoc} group from the mbox file (@pxref{Foreign Groups}).
@item
-Type `SPACE' to enter the newly created group.
+Type @kbd{SPACE} to enter the newly created group.
@item
-Type `M P b' to process-mark all articles in this group's buffer
+Type @kbd{M P b} to process-mark all articles in this group's buffer
(@pxref{Setting Process Marks}).
@item
-Type `B r' to respool all the process-marked articles, and answer
+Type @kbd{B r} to respool all the process-marked articles, and answer
@samp{nnml} when prompted (@pxref{Mail Group Commands}).
@end enumerate
sure that all the mail has ended up where it should be.
Respooling is also a handy thing to do if you're switching from one mail
-backend to another. Just respool all the mail in the old mail groups
-using the new mail backend.
+back end to another. Just respool all the mail in the old mail groups
+using the new mail back end.
@node Expiring Mail
course.
To make Gnus get rid of your unwanted mail, you have to mark the
-articles as @dfn{expirable}. This does not mean that the articles will
-disappear right away, however. In general, a mail article will be
+articles as @dfn{expirable}. (With the default keybindings, this means
+that you have to type @kbd{E}.) This does not mean that the articles
+will disappear right away, however. In general, a mail article will be
deleted from your system if, 1) it is marked as expirable, AND 2) it is
more than one week old. If you do not mark an article as expirable, it
will remain on your system until hell freezes over. This bears
repeating one more time, with some spurious capitalizations: IF you do
NOT mark articles as EXPIRABLE, Gnus will NEVER delete those ARTICLES.
+You do not have to mark articles as expirable by hand. Gnus provides
+two features, called `auto-expire' and `total-expire', that can help you
+with this. In a nutshell, `auto-expire' means that Gnus hits @kbd{E}
+for you when you select an article. And `total-expire' means that Gnus
+considers all articles as expirable that are read. So, in addition to
+the articles marked @samp{E}, also the articles marked @samp{r},
+@samp{R}, @samp{O}, @samp{K}, @samp{Y} and so on are considered
+expirable.
+
+When should either auto-expire or total-expire be used? Most people
+who are subscribed to mailing lists split each list into its own group
+and then turn on auto-expire or total-expire for those groups.
+(@xref{Splitting Mail}, for more information on splitting each list
+into its own group.)
+
+Which one is better, auto-expire or total-expire? It's not easy to
+answer. Generally speaking, auto-expire is probably faster. Another
+advantage of auto-expire is that you get more marks to work with: for
+the articles that are supposed to stick around, you can still choose
+between tick and dormant and read marks. But with total-expire, you
+only have dormant and ticked to choose from. The advantage of
+total-expire is that it works well with adaptive scoring @pxref{Adaptive
+Scoring}. Auto-expire works with normal scoring but not with adaptive
+scoring.
+
@vindex gnus-auto-expirable-newsgroups
-You do not have to mark articles as expirable by hand. Groups that
-match the regular expression @code{gnus-auto-expirable-newsgroups} will
-have all articles that you read marked as expirable automatically. All
-articles marked as expirable have an @samp{E} in the first
-column in the summary buffer.
+Groups that match the regular expression
+@code{gnus-auto-expirable-newsgroups} will have all articles that you
+read marked as expirable automatically. All articles marked as
+expirable have an @samp{E} in the first column in the summary buffer.
By default, if you have auto expiry switched on, Gnus will mark all the
articles you read as expirable, no matter if they were read or unread
before. To avoid having articles marked as read marked as expirable
automatically, you can put something like the following in your
-@file{.gnus} file:
+@file{.gnus.el} file:
@vindex gnus-mark-article-hook
@lisp
Note that making a group auto-expirable doesn't mean that all read
articles are expired---only the articles marked as expirable
will be expired. Also note that using the @kbd{d} command won't make
-groups expirable---only semi-automatic marking of articles as read will
+articles expirable---only semi-automatic marking of articles as read will
mark the articles as expirable in auto-expirable groups.
Let's say you subscribe to a couple of mailing lists, and you want the
You can also use the @code{expiry-wait} group parameter to selectively
change the expiry period (@pxref{Group Parameters}).
+@vindex nnmail-expiry-target
+The normal action taken when expiring articles is to delete them.
+However, in some circumstances it might make more sense to move them
+to other groups instead of deleting them. The variable
+@code{nnmail-expiry-target} (and the @code{expiry-target} group
+parameter) controls this. The variable supplies a default value for
+all groups, which can be overridden for specific groups by the group
+parameter. default value is @code{delete}, but this can also be a
+string (which should be the name of the group the message should be
+moved to), or a function (which will be called in a buffer narrowed to
+the message in question, and with the name of the group being moved
+from as its parameter) which should return a target -- either a group
+name or @code{delete}.
+
+Here's an example for specifying a group name:
+@lisp
+(setq nnmail-expiry-target "nnml:expired")
+@end lisp
+
+@findex nnmail-fancy-expiry-target
+@vindex nnmail-fancy-expiry-targets
+Gnus provides a function @code{nnmail-fancy-expiry-target} which will
+expire mail to groups according to the variable
+@code{nnmail-fancy-expiry-targets}. Here's an example:
+
+@lisp
+ (setq nnmail-expiry-target 'nnmail-fancy-expiry-target
+ nnmail-fancy-expiry-targets
+ '((to-from "boss" "nnfolder:Work")
+ ("subject" "IMPORTANT" "nnfolder:IMPORTANT.%Y.%b")
+ ("from" ".*" "nnfolder:Archive-%Y")))
+@end lisp
+
+With this setup, any mail that has @code{IMPORTANT} in its Subject
+header and was sent in the year @code{YYYY} and month @code{MMM}, will
+get expired to the group @code{nnfolder:IMPORTANT.YYYY.MMM}. If its
+From or To header contains the string @code{boss}, it will get expired
+to @code{nnfolder:Work}. All other mail will get expired to
+@code{nnfolder:Archive-YYYY}.
+
@vindex nnmail-keep-last-article
If @code{nnmail-keep-last-article} is non-@code{nil}, Gnus will never
expire the final article in a mail newsgroup. This is to make life
@cindex incoming mail treatment
Mailers and list servers are notorious for doing all sorts of really,
-really stupid things with mail. ``Hey, RFC822 doesn't explicitly
+really stupid things with mail. ``Hey, RFC 822 doesn't explicitly
prohibit us from adding the string @code{wE aRe ElItE!!!!!1!!} to the
end of all lines passing through our server, so let's do that!!!!1!''
-Yes, but RFC822 wasn't designed to be read by morons. Things that were
+Yes, but RFC 822 wasn't designed to be read by morons. Things that were
considered to be self-evident were not discussed. So. Here we are.
Case in point: The German version of Microsoft Exchange adds @samp{AW:
Gnus provides a plethora of functions for washing articles while
displaying them, but it might be nicer to do the filtering before
-storing the mail to disc. For that purpose, we have three hooks and
+storing the mail to disk. For that purpose, we have three hooks and
various functions that can be put in these hooks.
@table @code
Clear leading white space that ``helpful'' listservs have added to the
headers to make them look nice. Aaah.
+(Note that this function works on both the header on the body of all
+messages, so it is a potentially dangerous function to use (if a body
+of a message contains something that looks like a header line). So
+rather than fix the bug, it is of course the right solution to make it
+into a feature by documenting it.)
+
@item nnmail-remove-list-identifiers
@findex nnmail-remove-list-identifiers
Some list servers add an identifier---for example, @samp{(idm)}---to the
beginning of all @code{Subject} headers. I'm sure that's nice for
people who use stone age mail readers. This function will remove
strings that match the @code{nnmail-list-identifiers} regexp, which can
-also be a list of regexp.
+also be a list of regexp. @code{nnmail-list-identifiers} may not contain
+@code{\\(..\\)}.
For instance, if you want to remove the @samp{(idm)} and the
@samp{nagnagnag} identifiers:
'("(idm)" "nagnagnag"))
@end lisp
+This can also be done non-destructively with
+@code{gnus-list-identifiers}, @xref{Article Hiding}.
+
@item nnmail-remove-tabs
@findex nnmail-remove-tabs
Translate all @samp{TAB} characters into @samp{SPACE} characters.
@code{nnmail-message-id-cache-file}, which is @file{~/.nnmail-cache} by
default. The approximate maximum number of @code{Message-ID}s stored
there is controlled by the @code{nnmail-message-id-cache-length}
-variable, which is 1000 by default. (So 1000 @code{Message-ID}s will be
+variable, which is 1000 by default. (So 1000 @code{Message-ID}s will be
stored.) If all this sounds scary to you, you can set
@code{nnmail-treat-duplicates} to @code{warn} (which is what it is by
default), and @code{nnmail} won't delete duplicate mails. Instead it
@lisp
(setq nnmail-split-fancy
'(| ;; Messages duplicates go to a separate group.
- ("gnus-warning" "duplication of message" "duplicate")
+ ("gnus-warning" "duplicat\\(e\\|ion\\) of message" "duplicate")
;; Message from daemons, postmaster, and the like to another.
(any mail "mail.misc")
;; Other rules.
Or something like:
@lisp
(setq nnmail-split-methods
- '(("duplicates" "^Gnus-Warning:")
+ '(("duplicates" "^Gnus-Warning:.*duplicate")
;; Other rules.
[...]))
@end lisp
@node Not Reading Mail
@subsection Not Reading Mail
-If you start using any of the mail backends, they have the annoying
+If you start using any of the mail back ends, they have the annoying
habit of assuming that you want to read mail with them. This might not
be unreasonable, but it might not be what you want.
If you set @code{mail-sources} and @code{nnmail-spool-file} to
-@code{nil}, none of the backends will ever attempt to read incoming
+@code{nil}, none of the back ends will ever attempt to read incoming
mail, which should help.
@vindex nnbabyl-get-new-mail
@vindex nnfolder-get-new-mail
This might be too much, if, for instance, you are reading mail quite
happily with @code{nnml} and just want to peek at some old @sc{rmail}
-file you have stashed away with @code{nnbabyl}. All backends have
-variables called backend-@code{get-new-mail}. If you want to disable
+file you have stashed away with @code{nnbabyl}. All back ends have
+variables called back-end-@code{get-new-mail}. If you want to disable
the @code{nnbabyl} mail reading, you edit the virtual server for the
group to have a setting where @code{nnbabyl-get-new-mail} to @code{nil}.
-All the mail backends will call @code{nn}*@code{-prepare-save-mail-hook}
+All the mail back ends will call @code{nn}*@code{-prepare-save-mail-hook}
narrowed to the article to be saved before saving it when reading
incoming mail.
-@node Choosing a Mail Backend
-@subsection Choosing a Mail Backend
+@node Choosing a Mail Back End
+@subsection Choosing a Mail Back End
Gnus will read the mail spool when you activate a mail group. The mail
file is first copied to your home directory. What happens after that
depends on what format you want to store your mail in.
-There are five different mail backends in the standard Gnus, and more
-backends are available separately. The mail backend most people use
-(because it is the fastest and most flexible) is @code{nnml}
-(@pxref{Mail Spool}).
+There are six different mail back ends in the standard Gnus, and more
+back ends are available separately. The mail back end most people use
+(because it is possibly the fastest) is @code{nnml} (@pxref{Mail
+Spool}). You might notice that only five back ends are listed below;
+@code{nnmaildir}'s documentation has not yet been completely
+incorporated into this manual. Until it is, you can find it at
+@uref{http://multivac.cwru.edu./nnmaildir/}.
@menu
* Unix Mail Box:: Using the (quite) standard Un*x mbox.
* Rmail Babyl:: Emacs programs use the rmail babyl format.
* Mail Spool:: Store your mail in a private spool?
-* MH Spool:: An mhspool-like backend.
+* MH Spool:: An mhspool-like back end.
* Mail Folders:: Having one file for each group.
-* Comparing Mail Backends:: An in-depth looks at pros and cons.
+* Comparing Mail Back Ends:: An in-depth looks at pros and cons.
@end menu
@vindex nnmbox-active-file
@vindex nnmbox-mbox-file
-The @dfn{nnmbox} backend will use the standard Un*x mbox file to store
+The @dfn{nnmbox} back end will use the standard Un*x mbox file to store
mail. @code{nnmbox} will add extra headers to each mail article to say
which group it belongs in.
@table @code
@item nnmbox-mbox-file
@vindex nnmbox-mbox-file
-The name of the mail box in the user's home directory.
+The name of the mail box in the user's home directory. Default is
+@file{~/mbox}.
@item nnmbox-active-file
@vindex nnmbox-active-file
-The name of the active file for the mail box.
+The name of the active file for the mail box. Default is
+@file{~/.mbox-active}.
@item nnmbox-get-new-mail
@vindex nnmbox-get-new-mail
If non-@code{nil}, @code{nnmbox} will read incoming mail and split it
-into groups.
+into groups. Default is @code{t}.
@end table
@vindex nnbabyl-active-file
@vindex nnbabyl-mbox-file
-The @dfn{nnbabyl} backend will use a babyl mail box (aka. @dfn{rmail
-mbox}) to store mail. @code{nnbabyl} will add extra headers to each mail
-article to say which group it belongs in.
+The @dfn{nnbabyl} back end will use a babyl mail box (aka. @dfn{rmail
+mbox}) to store mail. @code{nnbabyl} will add extra headers to each
+mail article to say which group it belongs in.
Virtual server settings:
@table @code
@item nnbabyl-mbox-file
@vindex nnbabyl-mbox-file
-The name of the rmail mbox file.
+The name of the rmail mbox file. The default is @file{~/RMAIL}
@item nnbabyl-active-file
@vindex nnbabyl-active-file
-The name of the active file for the rmail box.
+The name of the active file for the rmail box. The default is
+@file{~/.rmail-active}
@item nnbabyl-get-new-mail
@vindex nnbabyl-get-new-mail
-If non-@code{nil}, @code{nnbabyl} will read incoming mail.
+If non-@code{nil}, @code{nnbabyl} will read incoming mail. Default is
+@code{t}
@end table
format. It should be used with some caution.
@vindex nnml-directory
-If you use this backend, Gnus will split all incoming mail into files,
+If you use this back end, Gnus will split all incoming mail into files,
one file for each mail, and put the articles into the corresponding
directories under the directory specified by the @code{nnml-directory}
variable. The default value is @file{~/Mail/}.
care of all that.
If you have a strict limit as to how many files you are allowed to store
-in your account, you should not use this backend. As each mail gets its
+in your account, you should not use this back end. As each mail gets its
own file, you might very well occupy thousands of inodes within a few
weeks. If this is no problem for you, and it isn't a problem for you
having your friendly systems administrator walking around, madly,
know that this is probably the fastest format to use. You do not have
to trudge through a big mbox file just to read your new mail.
-@code{nnml} is probably the slowest backend when it comes to article
+@code{nnml} is probably the slowest back end when it comes to article
splitting. It has to create lots of files, and it also generates
-@sc{nov} databases for the incoming mails. This makes it the fastest
-backend when it comes to reading mail.
+@sc{nov} databases for the incoming mails. This makes it possibly the
+fastest back end when it comes to reading mail.
+
+@cindex self contained nnml servers
+@cindex marks
+When the marks file is used (which it is by default), @code{nnml}
+servers have the property that you may backup them using @code{tar} or
+similar, and later be able to restore them into Gnus (by adding the
+proper @code{nnml} server) and have all your marks be preserved. Marks
+for a group is usually stored in the @code{.marks} file (but see
+@code{nnml-marks-file-name}) within each @code{nnml} group's directory.
+Individual @code{nnml} groups are also possible to backup, use @kbd{G m}
+to restore the group (after restoring the backup into the nnml
+directory).
+
+If for some reason you believe your @file{.marks} files are screwed
+up, you can just delete them all. Gnus will then correctly regenerate
+them next time it starts.
Virtual server settings:
@item nnml-directory
@vindex nnml-directory
All @code{nnml} directories will be placed under this directory.
+The default is the value of `message-directory' (whose default value is
+@file{~/Mail}).
@item nnml-active-file
@vindex nnml-active-file
-The active file for the @code{nnml} server.
+The active file for the @code{nnml} server. The default is
+@file{~/Mail/active"}.
@item nnml-newsgroups-file
@vindex nnml-newsgroups-file
The @code{nnml} group descriptions file. @xref{Newsgroups File
-Format}.
+Format}. The default is @file{~/Mail/newsgroups"}.
@item nnml-get-new-mail
@vindex nnml-get-new-mail
-If non-@code{nil}, @code{nnml} will read incoming mail.
+If non-@code{nil}, @code{nnml} will read incoming mail. The default is
+@code{t}.
@item nnml-nov-is-evil
@vindex nnml-nov-is-evil
-If non-@code{nil}, this backend will ignore any @sc{nov} files.
+If non-@code{nil}, this back end will ignore any @sc{nov} files. The
+default is @code{nil}.
@item nnml-nov-file-name
@vindex nnml-nov-file-name
@vindex nnml-prepare-save-mail-hook
Hook run narrowed to an article before saving.
+@item nnml-marks-is-evil
+@vindex nnml-marks-is-evil
+If non-@code{nil}, this back end will ignore any @sc{marks} files. The
+default is @code{nil}.
+
+@item nnml-marks-file-name
+@vindex nnml-marks-file-name
+The name of the @dfn{marks} files. The default is @file{.marks}.
+
+@item nnml-use-compressed-files
+@vindex nnml-use-compressed-files
+If non-@code{nil}, @code{nnml} will allow using compressed message
+files.
+
@end table
@findex nnml-generate-nov-databases
@cindex mh-e mail spool
@code{nnmh} is just like @code{nnml}, except that is doesn't generate
-@sc{nov} databases and it doesn't keep an active file. This makes
-@code{nnmh} a @emph{much} slower backend than @code{nnml}, but it also
-makes it easier to write procmail scripts for.
+@sc{nov} databases and it doesn't keep an active file or marks file.
+This makes @code{nnmh} a @emph{much} slower back end than @code{nnml},
+but it also makes it easier to write procmail scripts for.
Virtual server settings:
@table @code
@item nnmh-directory
@vindex nnmh-directory
-All @code{nnmh} directories will be located under this directory.
+All @code{nnmh} directories will be located under this directory. The
+default is the value of @code{message-directory} (whose default is
+@file{~/Mail})
@item nnmh-get-new-mail
@vindex nnmh-get-new-mail
-If non-@code{nil}, @code{nnmh} will read incoming mail.
+If non-@code{nil}, @code{nnmh} will read incoming mail. The default is
+@code{t}.
@item nnmh-be-safe
@vindex nnmh-be-safe
are. It will check date stamps and stat everything in sight, so
setting this to @code{t} will mean a serious slow-down. If you never
use anything but Gnus to read the @code{nnmh} articles, you do not have
-to set this variable to @code{t}.
+to set this variable to @code{t}. The default is @code{nil}.
@end table
@cindex mbox folders
@cindex mail folders
-@code{nnfolder} is a backend for storing each mail group in a separate
+@code{nnfolder} is a back end for storing each mail group in a separate
file. Each file is in the standard Un*x mbox format. @code{nnfolder}
will add extra headers to keep track of article numbers and arrival
dates.
+@cindex self contained nnfolder servers
+@cindex marks
+When the marks file is used (which it is by default), @code{nnfolder}
+servers have the property that you may backup them using @code{tar} or
+similar, and later be able to restore them into Gnus (by adding the
+proper @code{nnfolder} server) and have all your marks be preserved.
+Marks for a group is usually stored in a file named as the mbox file
+with @code{.mrk} concatenated to it (but see
+@code{nnfolder-marks-file-suffix}) within the @code{nnfolder} directory.
+Individual @code{nnfolder} groups are also possible to backup, use
+@kbd{G m} to restore the group (after restoring the backup into the
+@code{nnfolder} directory).
+
Virtual server settings:
@table @code
@item nnfolder-directory
@vindex nnfolder-directory
All the @code{nnfolder} mail boxes will be stored under this directory.
+The default is the value of @code{message-directory} (whose default is
+@file{~/Mail})
@item nnfolder-active-file
@vindex nnfolder-active-file
-The name of the active file.
+The name of the active file. The default is @file{~/Mail/active}.
@item nnfolder-newsgroups-file
@vindex nnfolder-newsgroups-file
-The name of the group descriptions file. @xref{Newsgroups File Format}.
+The name of the group descriptions file. @xref{Newsgroups File
+Format}. The default is @file{~/Mail/newsgroups"}
@item nnfolder-get-new-mail
@vindex nnfolder-get-new-mail
-If non-@code{nil}, @code{nnfolder} will read incoming mail.
+If non-@code{nil}, @code{nnfolder} will read incoming mail. The default
+is @code{t}
@item nnfolder-save-buffer-hook
@vindex nnfolder-save-buffer-hook
This function can be used to copy the message to somewhere else, or to
extract some information from it before removing it.
+@item nnfolder-nov-is-evil
+@vindex nnfolder-nov-is-evil
+If non-@code{nil}, this back end will ignore any @sc{nov} files. The
+default is @code{nil}.
+
+@item nnfolder-nov-file-suffix
+@vindex nnfolder-nov-file-suffix
+The extension for @sc{nov} files. The default is @file{.nov}.
+
+@item nnfolder-nov-directory
+@vindex nnfolder-nov-directory
+The directory where the @sc{nov} files should be stored. If nil,
+@code{nnfolder-directory} is used.
+
+@item nnfolder-marks-is-evil
+@vindex nnfolder-marks-is-evil
+If non-@code{nil}, this back end will ignore any @sc{marks} files. The
+default is @code{nil}.
+
+@item nnfolder-marks-file-suffix
+@vindex nnfolder-marks-file-suffix
+The extension for @sc{marks} files. The default is @file{.mrk}.
+
+@item nnfolder-marks-directory
+@vindex nnfolder-marks-directory
+The directory where the @sc{marks} files should be stored. If nil,
+@code{nnfolder-directory} is used.
+
@end table
@code{nnfolder-directory}. This only works if you use long file names,
though.
-@node Comparing Mail Backends
-@subsubsection Comparing Mail Backends
+@node Comparing Mail Back Ends
+@subsubsection Comparing Mail Back Ends
-First, just for terminology, the @dfn{backend} is the common word for a
+First, just for terminology, the @dfn{back end} is the common word for a
low-level access method---a transport, if you will, by which something
is acquired. The sense is that one's mail has to come from somewhere,
-and so selection of a suitable backend is required in order to get that
+and so selection of a suitable back end is required in order to get that
mail within spitting distance of Gnus.
The same concept exists for Usenet itself: Though access to articles is
-typically done by NNTP these days, once upon a midnight dreary, everyone
+typically done by @sc{nntp} these days, once upon a midnight dreary, everyone
in the world got at Usenet by running a reader on the machine where the
-articles lay (the machine which today we call an NNTP server), and
+articles lay (the machine which today we call an @sc{nntp} server), and
access was by the reader stepping into the articles' directory spool
area directly. One can still select between either the @code{nntp} or
-@code{nnspool} backends, to select between these methods, if one happens
+@code{nnspool} back ends, to select between these methods, if one happens
actually to live on the server (or can see its spool directly, anyway,
via NFS).
-The goal in selecting a mail backend is to pick one which
+The goal in selecting a mail back end is to pick one which
simultaneously represents a suitable way of dealing with the original
format plus leaving mail in a form that is convenient to use in the
future. Here are some high and low points on each:
@samp{From:} header.) Because Emacs and therefore Gnus emanate
historically from the Unix environment, it is simplest if one does not
mess a great deal with the original mailbox format, so if one chooses
-this backend, Gnus' primary activity in getting mail from the real spool
+this back end, Gnus' primary activity in getting mail from the real spool
area to Gnus' preferred directory is simply to copy it, with no
(appreciable) format change in the process. It is the ``dumbest'' way
to move mail into availability in the Gnus environment. This makes it
course, and is still maintained by Stallman.
Both of the above forms leave your mail in a single file on your
-filesystem, and they must parse that entire file each time you take a
+file system, and they must parse that entire file each time you take a
look at your mail.
@item nnml
-@code{nnml} is the backend which smells the most as though you were
+@code{nnml} is the back end which smells the most as though you were
actually operating with an @code{nnspool}-accessed Usenet system. (In
fact, I believe @code{nnml} actually derived from @code{nnspool} code,
lo these years ago.) One's mail is taken from the original spool file,
provided by the active file and overviews.
@code{nnml} costs @dfn{inodes} in a big way; that is, it soaks up the
-resource which defines available places in the filesystem to put new
+resource which defines available places in the file system to put new
files. Sysadmins take a dim view of heavy inode occupation within
-tight, shared filesystems. But if you live on a personal machine where
-the filesystem is your own and space is not at a premium, @code{nnml}
+tight, shared file systems. But if you live on a personal machine where
+the file system is your own and space is not at a premium, @code{nnml}
wins big.
-It is also problematic using this backend if you are living in a
+It is also problematic using this back end if you are living in a
FAT16-based Windows world, since much space will be wasted on all these
tiny files.
@item nnfolder
-Basically the effetc of @code{nnfolder} is @code{nnmbox} (the first
+Basically the effect of @code{nnfolder} is @code{nnmbox} (the first
method described above) on a per-group basis. That is, @code{nnmbox}
itself puts *all* one's mail in one file; @code{nnfolder} provides a
little bit of optimization to this so that each of one's mail groups has
a Unix mail box file. It's faster than @code{nnmbox} because each group
can be parsed separately, and still provides the simple Unix mail box
-format requiring minimal effort in moving the mail around. In addition,
-it maintains an ``active'' file making it much faster for Gnus to figure
+format requiring minimal effort in moving the mail around. In addition,
+it maintains an ``active'' file making it much faster for Gnus to figure
out how many messages there are in each separate group.
If you have groups that are expected to have a massive amount of
messages, @code{nnfolder} is not the best choice, but if you receive
only a moderate amount of mail, @code{nnfolder} is probably the most
-friendly mail backend all over.
+friendly mail back end all over.
+
+@item nnmaildir
+
+@code{nnmaildir} is largely similar to @code{nnml}, with some notable
+differences. Each message is stored in a separate file, but the
+filename is unrelated to the article number in Gnus. @code{nnmaildir}
+also stores the equivalent of @code{nnml}'s overview files in one file
+per article, so it uses about twice as many inodes as @code{nnml}. (Use
+@code{df -i} to see how plentiful your inode supply is.) If this slows
+you down or takes up very much space, consider switching to ReiserFS
+(@uref{http://www.namesys.com/}) or another non-block-structured
+file system.
+
+Since maildirs don't require locking for delivery, the maildirs you use
+as groups can also be the maildirs your mail is directly delivered to.
+This means you can skip Gnus's mail splitting if your mail is already
+organized into different mailboxes during delivery. A @code{directory}
+entry in @code{mail-sources} would have a similar effect, but would
+require one set of mailboxes for spooling deliveries (in mbox format,
+thus damaging message bodies), and another set to be used as groups (in
+whatever format you like). A maildir has a built-in spool, in the
+@code{new/} subdirectory. Beware that currently, mail moved from
+@code{new/} to @code{cur/} instead of via mail splitting will undergo
+treatment such as duplicate checking.
+
+An article will not necessarily keep the same number across Gnus
+sessions; articles are renumbered starting from 1 for each Gnus session
+(more precisely, each time you open the @code{nnmaildir} server). This
+way, you don't get gaps in your article number ranges, and when entering
+large groups, Gnus is likely to give a more accurate article count. The
+price is that @code{nnmaildir} doesn't work with the cache or agent.
+This will probably be changed in the future.
+
+@code{nnmaildir} stores article marks for a given group in the
+corresponding maildir, in a way designed so that it's easy to manipulate
+them from outside Gnus. You can tar up a maildir, unpack it somewhere
+else, and still have your marks. @code{nnml} also stores marks, but
+it's not as easy to work with them from outside Gnus as with
+@code{nnmaildir}.
+
+For configuring expiry and other things, @code{nnmaildir} uses group
+parameters slightly different from those of other mail back ends.
+
+@code{nnmaildir} uses a significant amount of memory to speed things up.
+(It keeps in memory some of the things that @code{nnml} stores in files
+and that @code{nnmh} repeatedly parses out of message files.) If this
+is a problem for you, you can set the @code{nov-cache-size} group
+parameter to something small (0 would probably not work, but 1 probably
+would) to make it use less memory.
+
+Startup and shutdown are likely to be slower with @code{nnmaildir} than
+with other back ends. Everything in between is likely to be faster,
+depending in part on your file system.
+
+@code{nnmaildir} does not use @code{nnoo}, so you cannot use @code{nnoo}
+to write an @code{nnmaildir}-derived back end.
@end table
+@node Browsing the Web
+@section Browsing the Web
+@cindex web
+@cindex browsing the web
+@cindex www
+@cindex http
-@node Other Sources
-@section Other Sources
+Web-based discussion forums are getting more and more popular. On many
+subjects, the web-based forums have become the most important forums,
+eclipsing the importance of mailing lists and news groups. The reason
+is easy to understand---they are friendly to new users; you just point
+and click, and there's the discussion. With mailing lists, you have to
+go through a cumbersome subscription procedure, and most people don't
+even know what a news group is.
-Gnus can do more than just read news or mail. The methods described
-below allow Gnus to view directories and files as if they were
-newsgroups.
+The problem with this scenario is that web browsers are not very good at
+being newsreaders. They do not keep track of what articles you've read;
+they do not allow you to score on subjects you're interested in; they do
+not allow off-line browsing; they require you to click around and drive
+you mad in the end.
+
+So---if web browsers suck at reading discussion forums, why not use Gnus
+to do it instead?
+
+Gnus has been getting a bit of a collection of back ends for providing
+interfaces to these sources.
@menu
-* Directory Groups:: You can read a directory as if it was a newsgroup.
-* Anything Groups:: Dired? Who needs dired?
-* Document Groups:: Single files can be the basis of a group.
-* SOUP:: Reading @sc{SOUP} packets ``offline''.
-* Web Searches:: Creating groups from articles that match a string.
-* Mail-To-News Gateways:: Posting articles via mail-to-news gateways.
+* Archiving Mail::
+* Web Searches:: Creating groups from articles that match a string.
+* Slashdot:: Reading the Slashdot comments.
+* Ultimate:: The Ultimate Bulletin Board systems.
+* Web Archive:: Reading mailing list archived on web.
+* RSS:: Reading RDF site summary.
+* Customizing w3:: Doing stuff to Emacs/w3 from Gnus.
@end menu
+All the web sources require Emacs/w3 and the url library to work.
+
+The main caveat with all these web sources is that they probably won't
+work for a very long time. Gleaning information from the @sc{html} data
+is guesswork at best, and when the layout is altered, the Gnus back end
+will fail. If you have reasonably new versions of these back ends,
+though, you should be ok.
+
+One thing all these Web methods have in common is that the Web sources
+are often down, unavailable or just plain too slow to be fun. In those
+cases, it makes a lot of sense to let the Gnus Agent (@pxref{Gnus
+Unplugged}) handle downloading articles, and then you can read them at
+leisure from your local disk. No more World Wide Wait for you.
+
+@node Archiving Mail
+@subsection Archiving Mail
+@cindex archiving mail
+@cindex backup of mail
+
+Some of the back ends, notably @code{nnml}, @code{nnfolder}, and
+@code{nnmaildir}, now actually store the article marks with each group.
+For these servers, archiving and restoring a group while preserving
+marks is fairly simple.
+
+(Preserving the group level and group parameters as well still
+requires ritual dancing and sacrifices to the @file{.newsrc.eld} deity
+though.)
+
+To archive an entire @code{nnml}, @code{nnfolder}, or @code{nnmaildir}
+server, take a recursive copy of the server directory. There is no need
+to shut down Gnus, so archiving may be invoked by @code{cron} or
+similar. You restore the data by restoring the directory tree, and
+adding a server definition pointing to that directory in Gnus. The
+@ref{Article Backlog}, @ref{Asynchronous Fetching} and other things
+might interfere with overwriting data, so you may want to shut down Gnus
+before you restore the data.
+
+It is also possible to archive individual @code{nnml},
+@code{nnfolder}, or @code{nnmaildir} groups, while preserving marks.
+For @code{nnml} or @code{nnmaildir}, you copy all files in the group's
+directory. For @code{nnfolder} you need to copy both the base folder
+file itself (@file{FOO}, say), and the marks file (@file{FOO.mrk} in
+this example). Restoring the group is done with @kbd{G m} from the Group
+buffer. The last step makes Gnus notice the new directory.
+@code{nnmaildir} notices the new directory automatically, so @kbd{G m}
+is unnecessary in that case.
-@node Directory Groups
-@subsection Directory Groups
-@cindex nndir
-@cindex directory groups
+@node Web Searches
+@subsection Web Searches
+@cindex nnweb
+@cindex Google
+@cindex dejanews
+@cindex gmane
+@cindex Usenet searches
+@cindex searching the Usenet
-If you have a directory that has lots of articles in separate files in
-it, you might treat it as a newsgroup. The files have to have numerical
-names, of course.
+It's, like, too neat to search the Usenet for articles that match a
+string, but it, like, totally @emph{sucks}, like, totally, to use one of
+those, like, Web browsers, and you, like, have to, rilly, like, look at
+the commercials, so, like, with Gnus you can do @emph{rad}, rilly,
+searches without having to use a browser.
-This might be an opportune moment to mention @code{ange-ftp} (and its
-successor @code{efs}), that most wonderful of all wonderful Emacs
-packages. When I wrote @code{nndir}, I didn't think much about it---a
-backend to read directories. Big deal.
+The @code{nnweb} back end allows an easy interface to the mighty search
+engine. You create an @code{nnweb} group, enter a search pattern, and
+then enter the group and read the articles like you would any normal
+group. The @kbd{G w} command in the group buffer (@pxref{Foreign
+Groups}) will do this in an easy-to-use fashion.
-@code{ange-ftp} changes that picture dramatically. For instance, if you
-enter the @code{ange-ftp} file name
-@file{/ftp.hpc.uh.edu:/pub/emacs/ding-list/} as the directory name,
-@code{ange-ftp} or @code{efs} will actually allow you to read this
-directory over at @samp{sina} as a newsgroup. Distributed news ahoy!
+@code{nnweb} groups don't really lend themselves to being solid
+groups---they have a very fleeting idea of article numbers. In fact,
+each time you enter an @code{nnweb} group (not even changing the search
+pattern), you are likely to get the articles ordered in a different
+manner. Not even using duplicate suppression (@pxref{Duplicate
+Suppression}) will help, since @code{nnweb} doesn't even know the
+@code{Message-ID} of the articles before reading them using some search
+engines (Google, for instance). The only possible way to keep track
+of which articles you've read is by scoring on the @code{Date}
+header---mark all articles posted before the last date you read the
+group as read.
-@code{nndir} will use @sc{nov} files if they are present.
+If the search engine changes its output substantially, @code{nnweb}
+won't be able to parse it and will fail. One could hardly fault the Web
+providers if they were to do this---their @emph{raison d'être} is to
+make money off of advertisements, not to provide services to the
+community. Since @code{nnweb} washes the ads off all the articles, one
+might think that the providers might be somewhat miffed. We'll see.
-@code{nndir} is a ``read-only'' backend---you can't delete or expire
-articles with this method. You can use @code{nnmh} or @code{nnml} for
-whatever you use @code{nndir} for, so you could switch to any of those
-methods if you feel the need to have a non-read-only @code{nndir}.
+You must have the @code{url} and @code{w3} package installed to be able
+to use @code{nnweb}.
+Virtual server variables:
-@node Anything Groups
-@subsection Anything Groups
-@cindex nneething
+@table @code
+@item nnweb-type
+@vindex nnweb-type
+What search engine type is being used. The currently supported types
+are @code{google}, @code{dejanews}, and @code{gmane}. Note that
+@code{dejanews} is an alias to @code{google}.
-From the @code{nndir} backend (which reads a single spool-like
-directory), it's just a hop and a skip to @code{nneething}, which
-pretends that any arbitrary directory is a newsgroup. Strange, but
-true.
+@item nnweb-search
+@vindex nnweb-search
+The search string to feed to the search engine.
-When @code{nneething} is presented with a directory, it will scan this
-directory and assign article numbers to each file. When you enter such
-a group, @code{nneething} must create ``headers'' that Gnus can use.
-After all, Gnus is a newsreader, in case you're
-forgetting. @code{nneething} does this in a two-step process. First, it
-snoops each file in question. If the file looks like an article (i.e.,
-the first few lines look like headers), it will use this as the head.
-If this is just some arbitrary file without a head (e.g. a C source
-file), @code{nneething} will cobble up a header out of thin air. It
-will use file ownership, name and date and do whatever it can with these
-elements.
-
-All this should happen automatically for you, and you will be presented
-with something that looks very much like a newsgroup. Totally like a
-newsgroup, to be precise. If you select an article, it will be displayed
-in the article buffer, just as usual.
+@item nnweb-max-hits
+@vindex nnweb-max-hits
+Advisory maximum number of hits per search to display. The default is
+999.
-If you select a line that represents a directory, Gnus will pop you into
-a new summary buffer for this @code{nneething} group. And so on. You can
-traverse the entire disk this way, if you feel like, but remember that
-Gnus is not dired, really, and does not intend to be, either.
+@item nnweb-type-definition
+@vindex nnweb-type-definition
+Type-to-definition alist. This alist says what @code{nnweb} should do
+with the various search engine types. The following elements must be
+present:
-There are two overall modes to this action---ephemeral or solid. When
-doing the ephemeral thing (i.e., @kbd{G D} from the group buffer), Gnus
-will not store information on what files you have read, and what files
-are new, and so on. If you create a solid @code{nneething} group the
-normal way with @kbd{G m}, Gnus will store a mapping table between
-article numbers and file names, and you can treat this group like any
-other groups. When you activate a solid @code{nneething} group, you will
-be told how many unread articles it contains, etc., etc.
+@table @code
+@item article
+Function to decode the article and provide something that Gnus
+understands.
-Some variables:
+@item map
+Function to create an article number to message header and URL alist.
-@table @code
-@item nneething-map-file-directory
-@vindex nneething-map-file-directory
-All the mapping files for solid @code{nneething} groups will be stored
-in this directory, which defaults to @file{~/.nneething/}.
+@item search
+Function to send the search string to the search engine.
-@item nneething-exclude-files
-@vindex nneething-exclude-files
-All files that match this regexp will be ignored. Nice to use to exclude
-auto-save files and the like, which is what it does by default.
+@item address
+The address the aforementioned function should send the search string
+to.
-@item nneething-include-files
-@vindex nneething-include-files
-Regexp saying what files to include in the group. If this variable is
-non-@code{nil}, only files matching this regexp will be included.
+@item id
+Format string URL to fetch an article by @code{Message-ID}.
+@end table
-@item nneething-map-file
-@vindex nneething-map-file
-Name of the map files.
@end table
-@node Document Groups
-@subsection Document Groups
-@cindex nndoc
-@cindex documentation group
-@cindex help group
+@node Slashdot
+@subsection Slashdot
+@cindex Slashdot
+@cindex nnslashdot
-@code{nndoc} is a cute little thing that will let you read a single file
-as a newsgroup. Several files types are supported:
+Slashdot (@uref{http://slashdot.org/}) is a popular news site, with
+lively discussion following the news articles. @code{nnslashdot} will
+let you read this forum in a convenient manner.
+
+The easiest way to read this source is to put something like the
+following in your @file{.gnus.el} file:
+
+@lisp
+(setq gnus-secondary-select-methods
+ '((nnslashdot "")))
+@end lisp
+
+This will make Gnus query the @code{nnslashdot} back end for new comments
+and groups. The @kbd{F} command will subscribe each new news article as
+a new Gnus group, and you can read the comments by entering these
+groups. (Note that the default subscription method is to subscribe new
+groups as zombies. Other methods are available (@pxref{Subscription
+Methods}).
+
+If you want to remove an old @code{nnslashdot} group, the @kbd{G DEL}
+command is the most handy tool (@pxref{Foreign Groups}).
+
+When following up to @code{nnslashdot} comments (or posting new
+comments), some light @sc{html}izations will be performed. In
+particular, text quoted with @samp{> } will be quoted with
+@code{blockquote} instead, and signatures will have @code{br} added to
+the end of each line. Other than that, you can just write @sc{html}
+directly into the message buffer. Note that Slashdot filters out some
+@sc{html} forms.
+
+The following variables can be altered to change its behavior:
@table @code
-@cindex babyl
-@cindex rmail mbox
+@item nnslashdot-threaded
+Whether @code{nnslashdot} should display threaded groups or not. The
+default is @code{t}. To be able to display threads, @code{nnslashdot}
+has to retrieve absolutely all comments in a group upon entry. If a
+threaded display is not required, @code{nnslashdot} will only retrieve
+the comments that are actually wanted by the user. Threading is nicer,
+but much, much slower than unthreaded.
+
+@item nnslashdot-login-name
+@vindex nnslashdot-login-name
+The login name to use when posting.
+
+@item nnslashdot-password
+@vindex nnslashdot-password
+The password to use when posting.
+
+@item nnslashdot-directory
+@vindex nnslashdot-directory
+Where @code{nnslashdot} will store its files. The default is
+@samp{~/News/slashdot/}.
+
+@item nnslashdot-active-url
+@vindex nnslashdot-active-url
+The @sc{url} format string that will be used to fetch the information on
+news articles and comments. The default is
+@samp{http://slashdot.org/search.pl?section=&min=%d}.
+
+@item nnslashdot-comments-url
+@vindex nnslashdot-comments-url
+The @sc{url} format string that will be used to fetch comments. The
+default is
+@samp{http://slashdot.org/comments.pl?sid=%s&threshold=%d&commentsort=%d&mode=flat&startat=%d}.
+
+@item nnslashdot-article-url
+@vindex nnslashdot-article-url
+The @sc{url} format string that will be used to fetch the news article. The
+default is
+@samp{http://slashdot.org/article.pl?sid=%s&mode=nocomment}.
+
+@item nnslashdot-threshold
+@vindex nnslashdot-threshold
+The score threshold. The default is -1.
+
+@item nnslashdot-group-number
+@vindex nnslashdot-group-number
+The number of old groups, in addition to the ten latest, to keep
+updated. The default is 0.
-@item babyl
-The babyl (rmail) mail box.
-@cindex mbox
-@cindex Unix mbox
+@end table
-@item mbox
-The standard Unix mbox file.
-@cindex MMDF mail box
-@item mmdf
-The MMDF mail box format.
-@item news
-Several news articles appended into a file.
+@node Ultimate
+@subsection Ultimate
+@cindex nnultimate
+@cindex Ultimate Bulletin Board
-@item rnews
-@cindex rnews batch files
-The rnews batch transport format.
-@cindex forwarded messages
+The Ultimate Bulletin Board (@uref{http://www.ultimatebb.com/}) is
+probably the most popular Web bulletin board system used. It has a
+quite regular and nice interface, and it's possible to get the
+information Gnus needs to keep groups updated.
-@item forward
-Forwarded articles.
+The easiest way to get started with @code{nnultimate} is to say
+something like the following in the group buffer: @kbd{B nnultimate RET
+http://www.tcj.com/messboard/ubbcgi/ RET}. (Substitute the @sc{url}
+(not including @samp{Ultimate.cgi} or the like at the end) for a forum
+you're interested in; there's quite a list of them on the Ultimate web
+site.) Then subscribe to the groups you're interested in from the
+server buffer, and read them from the group buffer.
-@item nsmail
-Netscape mail boxes.
+The following @code{nnultimate} variables can be altered:
-@item mime-parts
-MIME multipart messages.
+@table @code
+@item nnultimate-directory
+@vindex nnultimate-directory
+The directory where @code{nnultimate} stores its files. The default is
+@samp{~/News/ultimate/}.
+@end table
-@item standard-digest
-The standard (RFC 1153) digest format.
-@item slack-digest
-Non-standard digest format---matches most things, but does it badly.
+@node Web Archive
+@subsection Web Archive
+@cindex nnwarchive
+@cindex Web Archive
+
+Some mailing lists only have archives on Web servers, such as
+@uref{http://www.egroups.com/} and
+@uref{http://www.mail-archive.com/}. It has a quite regular and nice
+interface, and it's possible to get the information Gnus needs to keep
+groups updated.
+
+The easiest way to get started with @code{nnwarchive} is to say
+something like the following in the group buffer: @kbd{M-x
+gnus-group-make-warchive-group RET an_egroup RET egroups RET
+www.egroups.com RET your@@email.address RET}. (Substitute the
+@sc{an_egroup} with the mailing list you subscribed, the
+@sc{your@@email.address} with your email address.), or to browse the
+back end by @kbd{B nnwarchive RET mail-archive RET}.
+
+The following @code{nnwarchive} variables can be altered:
+
+@table @code
+@item nnwarchive-directory
+@vindex nnwarchive-directory
+The directory where @code{nnwarchive} stores its files. The default is
+@samp{~/News/warchive/}.
+
+@item nnwarchive-login
+@vindex nnwarchive-login
+The account name on the web server.
+
+@item nnwarchive-passwd
+@vindex nnwarchive-passwd
+The password for your account on the web server.
@end table
-You can also use the special ``file type'' @code{guess}, which means
-that @code{nndoc} will try to guess what file type it is looking at.
-@code{digest} means that @code{nndoc} should guess what digest type the
-file is.
+@node RSS
+@subsection RSS
+@cindex nnrss
+@cindex RSS
-@code{nndoc} will not try to change the file or insert any extra headers into
-it---it will simply, like, let you use the file as the basis for a
-group. And that's it.
+Some sites have RDF site summary (RSS)
+@uref{http://purl.org/rss/1.0/spec}. It has a quite regular and nice
+interface, and it's possible to get the information Gnus needs to keep
+groups updated.
-If you have some old archived articles that you want to insert into your
-new & spiffy Gnus mail backend, @code{nndoc} can probably help you with
-that. Say you have an old @file{RMAIL} file with mail that you now want
-to split into your new @code{nnml} groups. You look at that file using
-@code{nndoc} (using the @kbd{G f} command in the group buffer
-(@pxref{Foreign Groups})), set the process mark on all the articles in
-the buffer (@kbd{M P b}, for instance), and then re-spool (@kbd{B r})
-using @code{nnml}. If all goes well, all the mail in the @file{RMAIL}
-file is now also stored in lots of @code{nnml} directories, and you can
-delete that pesky @file{RMAIL} file. If you have the guts!
+The easiest way to get started with @code{nnrss} is to say something
+like the following in the group buffer: @kbd{B nnrss RET RET}, then
+subscribe groups.
-Virtual server variables:
+The following @code{nnrss} variables can be altered:
@table @code
-@item nndoc-article-type
-@vindex nndoc-article-type
-This should be one of @code{mbox}, @code{babyl}, @code{digest},
-@code{news}, @code{rnews}, @code{mmdf}, @code{forward}, @code{rfc934},
-@code{rfc822-forward}, @code{mime-parts}, @code{standard-digest},
-@code{slack-digest}, @code{clari-briefs}, @code{nsmail} or @code{guess}.
+@item nnrss-directory
+@vindex nnrss-directory
+The directory where @code{nnrss} stores its files. The default is
+@samp{~/News/rss/}.
-@item nndoc-post-type
-@vindex nndoc-post-type
-This variable says whether Gnus is to consider the group a news group or
-a mail group. There are two valid values: @code{mail} (the default)
-and @code{news}.
@end table
-@menu
-* Document Server Internals:: How to add your own document types.
-@end menu
-
+The following code may be helpful, if you want to show the description in
+the summary buffer.
-@node Document Server Internals
-@subsubsection Document Server Internals
+@lisp
+(add-to-list 'nnmail-extra-headers nnrss-description-field)
+(setq gnus-summary-line-format "%U%R%z%I%(%[%4L: %-15,15f%]%) %s%uX\n")
-Adding new document types to be recognized by @code{nndoc} isn't
-difficult. You just have to whip up a definition of what the document
-looks like, write a predicate function to recognize that document type,
-and then hook into @code{nndoc}.
+(defun gnus-user-format-function-X (header)
+ (let ((descr
+ (assq nnrss-description-field (mail-header-extra header))))
+ (if descr (concat "\n\t" (cdr descr)) "")))
+@end lisp
-First, here's an example document type definition:
+The following code may be useful to open an nnrss url directly from the
+summary buffer.
+@lisp
+(require 'browse-url)
+
+(defun browse-nnrss-url( arg )
+ (interactive "p")
+ (let ((url (assq nnrss-url-field
+ (mail-header-extra
+ (gnus-data-header
+ (assq (gnus-summary-article-number)
+ gnus-newsgroup-data))))))
+ (if url
+ (progn
+ (browse-url (cdr url))
+ (gnus-summary-mark-as-read-forward 1))
+ (gnus-summary-scroll-up arg))))
+
+(eval-after-load "gnus"
+ #'(define-key gnus-summary-mode-map
+ (kbd "<RET>") 'browse-nnrss-url))
+(add-to-list 'nnmail-extra-headers nnrss-url-field)
+@end lisp
-@example
-(mmdf
- (article-begin . "^\^A\^A\^A\^A\n")
- (body-end . "^\^A\^A\^A\^A\n"))
-@end example
+@node Customizing w3
+@subsection Customizing w3
+@cindex w3
+@cindex html
+@cindex url
+@cindex Netscape
-The definition is simply a unique @dfn{name} followed by a series of
-regexp pseudo-variable settings. Below are the possible
-variables---don't be daunted by the number of variables; most document
-types can be defined with very few settings:
+Gnus uses the url library to fetch web pages and Emacs/w3 to display web
+pages. Emacs/w3 is documented in its own manual, but there are some
+things that may be more relevant for Gnus users.
-@table @code
-@item first-article
-If present, @code{nndoc} will skip past all text until it finds
-something that match this regexp. All text before this will be
-totally ignored.
+For instance, a common question is how to make Emacs/w3 follow links
+using the @code{browse-url} functions (which will call some external web
+browser like Netscape). Here's one way:
-@item article-begin
-This setting has to be present in all document type definitions. It
-says what the beginning of each article looks like.
+@lisp
+(eval-after-load "w3"
+ '(progn
+ (fset 'w3-fetch-orig (symbol-function 'w3-fetch))
+ (defun w3-fetch (&optional url target)
+ (interactive (list (w3-read-url-with-default)))
+ (if (eq major-mode 'gnus-article-mode)
+ (browse-url url)
+ (w3-fetch-orig url target)))))
+@end lisp
-@item head-begin-function
-If present, this should be a function that moves point to the head of
-the article.
+Put that in your @file{.emacs} file, and hitting links in w3-rendered
+@sc{html} in the Gnus article buffers will use @code{browse-url} to
+follow the link.
-@item nndoc-head-begin
-If present, this should be a regexp that matches the head of the
-article.
-@item nndoc-head-end
-This should match the end of the head of the article. It defaults to
-@samp{^$}---the empty line.
+@node IMAP
+@section IMAP
+@cindex nnimap
+@cindex @sc{imap}
-@item body-begin-function
-If present, this function should move point to the beginning of the body
-of the article.
+@sc{imap} is a network protocol for reading mail (or news, or ...),
+think of it as a modernized @sc{nntp}. Connecting to a @sc{imap}
+server is much similar to connecting to a news server, you just
+specify the network address of the server.
-@item body-begin
-This should match the beginning of the body of the article. It defaults
-to @samp{^\n}.
+@sc{imap} has two properties. First, @sc{imap} can do everything that
+POP can, it can hence be viewed as a POP++. Secondly, @sc{imap} is a
+mail storage protocol, similar to @sc{nntp} being a news storage
+protocol -- however, @sc{imap} offers more features than @sc{nntp}
+because news is more or less read-only whereas mail is read-write.
-@item body-end-function
-If present, this function should move point to the end of the body of
-the article.
+If you want to use @sc{imap} as a POP++, use an imap entry in
+@code{mail-sources}. With this, Gnus will fetch mails from the
+@sc{imap} server and store them on the local disk. This is not the
+usage described in this section--@xref{Mail Sources}.
-@item body-end
-If present, this should match the end of the body of the article.
+If you want to use @sc{imap} as a mail storage protocol, use an nnimap
+entry in @code{gnus-secondary-select-methods}. With this, Gnus will
+manipulate mails stored on the @sc{imap} server. This is the kind of
+usage explained in this section.
-@item file-end
-If present, this should match the end of the file. All text after this
-regexp will be totally ignored.
+A server configuration in @code{~/.gnus} with a few @sc{imap} servers
+might look something like the following. (Note that for SSL/TLS, you
+need external programs and libraries, see below.)
-@end table
+@lisp
+(setq gnus-secondary-select-methods
+ '((nnimap "simpleserver") ; no special configuration
+ ; perhaps a ssh port forwarded server:
+ (nnimap "dolk"
+ (nnimap-address "localhost")
+ (nnimap-server-port 1430))
+ ; a UW server running on localhost
+ (nnimap "barbar"
+ (nnimap-server-port 143)
+ (nnimap-address "localhost")
+ (nnimap-list-pattern ("INBOX" "mail/*")))
+ ; anonymous public cyrus server:
+ (nnimap "cyrus.andrew.cmu.edu"
+ (nnimap-authenticator anonymous)
+ (nnimap-list-pattern "archive.*")
+ (nnimap-stream network))
+ ; a ssl server on a non-standard port:
+ (nnimap "vic20"
+ (nnimap-address "vic20.somewhere.com")
+ (nnimap-server-port 9930)
+ (nnimap-stream ssl))))
+@end lisp
-So, using these variables @code{nndoc} is able to dissect a document
-file into a series of articles, each with a head and a body. However, a
-few more variables are needed since not all document types are all that
-news-like---variables needed to transform the head or the body into
-something that's palatable for Gnus:
+The following variables can be used to create a virtual @code{nnimap}
+server:
@table @code
-@item prepare-body-function
-If present, this function will be called when requesting an article. It
-will be called with point at the start of the body, and is useful if the
-document has encoded some parts of its contents.
-@item article-transform-function
-If present, this function is called when requesting an article. It's
-meant to be used for more wide-ranging transformation of both head and
-body of the article.
+@item nnimap-address
+@vindex nnimap-address
-@item generate-head-function
-If present, this function is called to generate a head that Gnus can
-understand. It is called with the article number as a parameter, and is
-expected to generate a nice head for the article in question. It is
-called when requesting the headers of all articles.
+The address of the remote @sc{imap} server. Defaults to the virtual
+server name if not specified.
-@end table
+@item nnimap-server-port
+@vindex nnimap-server-port
+Port on server to contact. Defaults to port 143, or 993 for SSL.
-Let's look at the most complicated example I can come up with---standard
-digests:
+Note that this should be an integer, example server specification:
-@example
-(standard-digest
- (first-article . ,(concat "^" (make-string 70 ?-) "\n\n+"))
- (article-begin . ,(concat "\n\n" (make-string 30 ?-) "\n\n+"))
- (prepare-body-function . nndoc-unquote-dashes)
- (body-end-function . nndoc-digest-body-end)
- (head-end . "^ ?$")
- (body-begin . "^ ?\n")
- (file-end . "^End of .*digest.*[0-9].*\n\\*\\*\\|^End of.*Digest *$")
- (subtype digest guess))
-@end example
+@lisp
+(nnimap "mail.server.com"
+ (nnimap-server-port 4711))
+@end lisp
-We see that all text before a 70-width line of dashes is ignored; all
-text after a line that starts with that @samp{^End of} is also ignored;
-each article begins with a 30-width line of dashes; the line separating
-the head from the body may contain a single space; and that the body is
-run through @code{nndoc-unquote-dashes} before being delivered.
+@item nnimap-list-pattern
+@vindex nnimap-list-pattern
+String or list of strings of mailboxes to limit available groups to.
+This is used when the server has very many mailboxes and you're only
+interested in a few -- some servers export your home directory via
+@sc{imap}, you'll probably want to limit the mailboxes to those in
+@file{~/Mail/*} then.
-To hook your own document definition into @code{nndoc}, use the
-@code{nndoc-add-type} function. It takes two parameters---the first is
-the definition itself and the second (optional) parameter says where in
-the document type definition alist to put this definition. The alist is
-traversed sequentially, and @code{nndoc-TYPE-type-p} is called for a given type @code{TYPE}. So @code{nndoc-mmdf-type-p} is called to see whether a document
-is of @code{mmdf} type, and so on. These type predicates should return
-@code{nil} if the document is not of the correct type; @code{t} if it is
-of the correct type; and a number if the document might be of the
-correct type. A high number means high probability; a low number means
-low probability with @samp{0} being the lowest valid number.
+The string can also be a cons of REFERENCE and the string as above, what
+REFERENCE is used for is server specific, but on the University of
+Washington server it's a directory that will be concatenated with the
+mailbox.
+Example server specification:
-@node SOUP
-@subsection SOUP
-@cindex SOUP
-@cindex offline
+@lisp
+(nnimap "mail.server.com"
+ (nnimap-list-pattern ("INBOX" "Mail/*" "alt.sex.*"
+ ("~friend/Mail/" . "list/*"))))
+@end lisp
-In the PC world people often talk about ``offline'' newsreaders. These
-are thingies that are combined reader/news transport monstrosities.
-With built-in modem programs. Yecchh!
+@item nnimap-stream
+@vindex nnimap-stream
+The type of stream used to connect to your server. By default, nnimap
+will detect and automatically use all of the below, with the exception
+of SSL/TLS. (@sc{imap} over SSL/TLS is being replaced by STARTTLS, which
+can be automatically detected, but it's not widely deployed yet.)
-Of course, us Unix Weenie types of human beans use things like
-@code{uucp} and, like, @code{nntpd} and set up proper news and mail
-transport things like Ghod intended. And then we just use normal
-newsreaders.
+Example server specification:
-However, it can sometimes be convenient to do something a that's a bit
-easier on the brain if you have a very slow modem, and you're not really
-that interested in doing things properly.
-
-A file format called @sc{soup} has been developed for transporting news
-and mail from servers to home machines and back again. It can be a bit
-fiddly.
+@lisp
+(nnimap "mail.server.com"
+ (nnimap-stream ssl))
+@end lisp
-First some terminology:
+Please note that the value of @code{nnimap-stream} is a symbol!
-@table @dfn
+@itemize @bullet
+@item
+@dfn{gssapi:} Connect with GSSAPI (usually Kerberos 5). Requires the
+@samp{imtest} program.
+@item
+@dfn{kerberos4:} Connect with Kerberos 4. Requires the @samp{imtest} program.
+@item
+@dfn{starttls:} Connect via the STARTTLS extension (similar to
+SSL). Requires the external library @samp{starttls.el} and program
+@samp{starttls}.
+@item
+@dfn{ssl:} Connect through SSL. Requires OpenSSL (the program
+@samp{openssl}) or SSLeay (@samp{s_client}) as well as the external
+library @samp{ssl.el}.
+@item
+@dfn{shell:} Use a shell command to start @sc{imap} connection.
+@item
+@dfn{network:} Plain, TCP/IP network connection.
+@end itemize
-@item server
-This is the machine that is connected to the outside world and where you
-get news and/or mail from.
+@vindex imap-kerberos4-program
+The @samp{imtest} program is shipped with Cyrus IMAPD. If you're
+using @samp{imtest} from Cyrus IMAPD < 2.0.14 (which includes version
+1.5.x and 1.6.x) you need to frob @code{imap-process-connection-type}
+to make @code{imap.el} use a pty instead of a pipe when communicating
+with @samp{imtest}. You will then suffer from a line length
+restrictions on @sc{imap} commands, which might make Gnus seem to hang
+indefinitely if you have many articles in a mailbox. The variable
+@code{imap-kerberos4-program} contain parameters to pass to the imtest
+program.
+
+@vindex imap-ssl-program
+For SSL connections, the OpenSSL program is available from
+@uref{http://www.openssl.org/}. OpenSSL was formerly known as SSLeay,
+and nnimap support it too - although the most recent versions of
+SSLeay, 0.9.x, are known to have serious bugs making it
+useless. Earlier versions, especially 0.8.x, of SSLeay are known to
+work. The variable @code{imap-ssl-program} contain parameters to pass
+to OpenSSL/SSLeay. You also need @samp{ssl.el} (from the W3
+distribution, for instance).
+
+@vindex imap-shell-program
+@vindex imap-shell-host
+For @sc{imap} connections using the @code{shell} stream, the variable
+@code{imap-shell-program} specify what program to call.
+
+@item nnimap-authenticator
+@vindex nnimap-authenticator
+
+The authenticator used to connect to the server. By default, nnimap
+will use the most secure authenticator your server is capable of.
+
+Example server specification:
-@item home machine
-This is the machine that you want to do the actual reading and responding
-on. It is typically not connected to the rest of the world in any way.
+@lisp
+(nnimap "mail.server.com"
+ (nnimap-authenticator anonymous))
+@end lisp
-@item packet
-Something that contains messages and/or commands. There are two kinds
-of packets:
+Please note that the value of @code{nnimap-authenticator} is a symbol!
-@table @dfn
-@item message packets
-These are packets made at the server, and typically contain lots of
-messages for you to read. These are called @file{SoupoutX.tgz} by
-default, where @var{X} is a number.
+@itemize @bullet
+@item
+@dfn{gssapi:} GSSAPI (usually kerberos 5) authentication. Requires
+external program @code{imtest}.
+@item
+@dfn{kerberos4:} Kerberos 4 authentication. Requires external program
+@code{imtest}.
+@item
+@dfn{digest-md5:} Encrypted username/password via DIGEST-MD5. Requires
+external library @code{digest-md5.el}.
+@item
+@dfn{cram-md5:} Encrypted username/password via CRAM-MD5.
+@item
+@dfn{login:} Plain-text username/password via LOGIN.
+@item
+@dfn{anonymous:} Login as `anonymous', supplying your email address as password.
+@end itemize
-@item response packets
-These are packets made at the home machine, and typically contains
-replies that you've written. These are called @file{SoupinX.tgz} by
-default, where @var{X} is a number.
+@item nnimap-expunge-on-close
+@cindex Expunging
+@vindex nnimap-expunge-on-close
+Unlike Parmenides the @sc{imap} designers has decided that things that
+doesn't exist actually does exist. More specifically, @sc{imap} has
+this concept of marking articles @code{Deleted} which doesn't actually
+delete them, and this (marking them @code{Deleted}, that is) is what
+nnimap does when you delete a article in Gnus (with @kbd{B DEL} or
+similar).
+
+Since the articles aren't really removed when we mark them with the
+@code{Deleted} flag we'll need a way to actually delete them. Feel like
+running in circles yet?
+
+Traditionally, nnimap has removed all articles marked as @code{Deleted}
+when closing a mailbox but this is now configurable by this server
+variable.
-@end table
+The possible options are:
-@end table
+@table @code
+@item always
+The default behavior, delete all articles marked as "Deleted" when
+closing a mailbox.
+@item never
+Never actually delete articles. Currently there is no way of showing
+the articles marked for deletion in nnimap, but other @sc{imap} clients
+may allow you to do this. If you ever want to run the EXPUNGE command
+manually, @xref{Expunging mailboxes}.
+@item ask
+When closing mailboxes, nnimap will ask if you wish to expunge deleted
+articles or not.
-@enumerate
+@end table
-@item
-You log in on the server and create a @sc{soup} packet. You can either
-use a dedicated @sc{soup} thingie (like the @code{awk} program), or you
-can use Gnus to create the packet with its @sc{soup} commands (@kbd{O
-s} and/or @kbd{G s b}; and then @kbd{G s p}) (@pxref{SOUP Commands}).
+@item nnimap-importantize-dormant
+@vindex nnimap-importantize-dormant
-@item
-You transfer the packet home. Rail, boat, car or modem will do fine.
+If non-nil (the default), marks dormant articles as ticked (as well),
+for other @sc{imap} clients. Within Gnus, dormant articles will
+naturally still (only) be marked as dormant. This is to make dormant
+articles stand out, just like ticked articles, in other @sc{imap}
+clients. (In other words, Gnus has two ``Tick'' marks and @sc{imap}
+has only one.)
-@item
-You put the packet in your home directory.
+Probably the only reason for frobing this would be if you're trying
+enable per-user persistant dormant flags, using something like:
-@item
-You fire up Gnus on your home machine using the @code{nnsoup} backend as
-the native or secondary server.
+@lisp
+(setcdr (assq 'dormant nnimap-mark-to-flag-alist)
+ (format "gnus-dormant-%s" (user-login-name)))
+(setcdr (assq 'dormant nnimap-mark-to-predicate-alist)
+ (format "KEYWORD gnus-dormant-%s" (user-login-name)))
+@end lisp
-@item
-You read articles and mail and answer and followup to the things you
-want (@pxref{SOUP Replies}).
+In this case, you would not want the per-user dormant flag showing up
+as ticked for other users.
-@item
-You do the @kbd{G s r} command to pack these replies into a @sc{soup}
-packet.
+@item nnimap-expunge-search-string
+@cindex Expunging
+@vindex nnimap-expunge-search-string
-@item
-You transfer this packet to the server.
+This variable contain the @sc{imap} search command sent to server when
+searching for articles eligible for expiring. The default is
+@code{"UID %s NOT SINCE %s"}, where the first @code{%s} is replaced by
+UID set and the second @code{%s} is replaced by a date.
-@item
-You use Gnus to mail this packet out with the @kbd{G s s} command.
+Probably the only useful value to change this to is
+@code{"UID %s NOT SENTSINCE %s"}, which makes nnimap use the Date: in
+messages instead of the internal article date. See section 6.4.4 of
+RFC 2060 for more information on valid strings.
-@item
-You then repeat until you die.
+@item nnimap-authinfo-file
+@vindex nnimap-authinfo-file
-@end enumerate
+A file containing credentials used to log in on servers. The format is
+(almost) the same as the @code{ftp} @file{~/.netrc} file. See the
+variable @code{nntp-authinfo-file} for exact syntax; also see
+@ref{NNTP}.
-So you basically have a bipartite system---you use @code{nnsoup} for
-reading and Gnus for packing/sending these @sc{soup} packets.
+@end table
@menu
-* SOUP Commands:: Commands for creating and sending @sc{soup} packets
-* SOUP Groups:: A backend for reading @sc{soup} packets.
-* SOUP Replies:: How to enable @code{nnsoup} to take over mail and news.
+* Splitting in IMAP:: Splitting mail with nnimap.
+* Expiring in IMAP:: Expiring mail with nnimap.
+* Editing IMAP ACLs:: Limiting/enabling other users access to a mailbox.
+* Expunging mailboxes:: Equivalent of a "compress mailbox" button.
+* A note on namespaces:: How to (not) use IMAP namespace in Gnus.
@end menu
-@node SOUP Commands
-@subsubsection SOUP Commands
-These are commands for creating and manipulating @sc{soup} packets.
+@node Splitting in IMAP
+@subsection Splitting in IMAP
+@cindex splitting imap mail
-@table @kbd
-@item G s b
-@kindex G s b (Group)
-@findex gnus-group-brew-soup
-Pack all unread articles in the current group
-(@code{gnus-group-brew-soup}). This command understands the
-process/prefix convention.
+Splitting is something Gnus users has loved and used for years, and now
+the rest of the world is catching up. Yeah, dream on, not many
+@sc{imap} server has server side splitting and those that have splitting
+seem to use some non-standard protocol. This means that @sc{imap}
+support for Gnus has to do it's own splitting.
-@item G s w
-@kindex G s w (Group)
-@findex gnus-soup-save-areas
-Save all @sc{soup} data files (@code{gnus-soup-save-areas}).
+And it does.
-@item G s s
-@kindex G s s (Group)
-@findex gnus-soup-send-replies
-Send all replies from the replies packet
-(@code{gnus-soup-send-replies}).
+Here are the variables of interest:
-@item G s p
-@kindex G s p (Group)
-@findex gnus-soup-pack-packet
-Pack all files into a @sc{soup} packet (@code{gnus-soup-pack-packet}).
+@table @code
-@item G s r
-@kindex G s r (Group)
-@findex nnsoup-pack-replies
-Pack all replies into a replies packet (@code{nnsoup-pack-replies}).
+@item nnimap-split-crosspost
+@cindex splitting, crosspost
+@cindex crosspost
+@vindex nnimap-split-crosspost
-@item O s
-@kindex O s (Summary)
-@findex gnus-soup-add-article
-This summary-mode command adds the current article to a @sc{soup} packet
-(@code{gnus-soup-add-article}). It understands the process/prefix
-convention (@pxref{Process/Prefix}).
+If non-nil, do crossposting if several split methods match the mail. If
+nil, the first match in @code{nnimap-split-rule} found will be used.
-@end table
+Nnmail equivalent: @code{nnmail-crosspost}.
+@item nnimap-split-inbox
+@cindex splitting, inbox
+@cindex inbox
+@vindex nnimap-split-inbox
-There are a few variables to customize where Gnus will put all these
-thingies:
+A string or a list of strings that gives the name(s) of @sc{imap}
+mailboxes to split from. Defaults to nil, which means that splitting is
+disabled!
-@table @code
+@lisp
+(setq nnimap-split-inbox
+ '("INBOX" ("~/friend/Mail" . "lists/*") "lists.imap"))
+@end lisp
-@item gnus-soup-directory
-@vindex gnus-soup-directory
-Directory where Gnus will save intermediate files while composing
-@sc{soup} packets. The default is @file{~/SoupBrew/}.
+No nnmail equivalent.
-@item gnus-soup-replies-directory
-@vindex gnus-soup-replies-directory
-This is what Gnus will use as a temporary directory while sending our
-reply packets. @file{~/SoupBrew/SoupReplies/} is the default.
+@item nnimap-split-rule
+@cindex Splitting, rules
+@vindex nnimap-split-rule
-@item gnus-soup-prefix-file
-@vindex gnus-soup-prefix-file
-Name of the file where Gnus stores the last used prefix. The default is
-@samp{gnus-prefix}.
+New mail found in @code{nnimap-split-inbox} will be split according to
+this variable.
-@item gnus-soup-packer
-@vindex gnus-soup-packer
-A format string command for packing a @sc{soup} packet. The default is
-@samp{tar cf - %s | gzip > $HOME/Soupout%d.tgz}.
+This variable contains a list of lists, where the first element in the
+sublist gives the name of the @sc{imap} mailbox to move articles
+matching the regexp in the second element in the sublist. Got that?
+Neither did I, we need examples.
-@item gnus-soup-unpacker
-@vindex gnus-soup-unpacker
-Format string command for unpacking a @sc{soup} packet. The default is
-@samp{gunzip -c %s | tar xvf -}.
+@lisp
+(setq nnimap-split-rule
+ '(("INBOX.nnimap"
+ "^Sender: owner-nnimap@@vic20.globalcom.se")
+ ("INBOX.junk" "^Subject:.*MAKE MONEY")
+ ("INBOX.private" "")))
+@end lisp
-@item gnus-soup-packet-directory
-@vindex gnus-soup-packet-directory
-Where Gnus will look for reply packets. The default is @file{~/}.
+This will put all articles from the nnimap mailing list into mailbox
+INBOX.nnimap, all articles containing MAKE MONEY in the Subject: line
+into INBOX.junk and everything else in INBOX.private.
-@item gnus-soup-packet-regexp
-@vindex gnus-soup-packet-regexp
-Regular expression matching @sc{soup} reply packets in
-@code{gnus-soup-packet-directory}.
+The first string may contain `\\1' forms, like the ones used by
+replace-match to insert sub-expressions from the matched text. For
+instance:
-@end table
+@lisp
+("INBOX.lists.\\1" "^Sender: owner-\\([a-z-]+\\)@@")
+@end lisp
+The first element can also be the symbol @code{junk} to indicate that
+matching messages should simply be deleted. Use with care.
-@node SOUP Groups
-@subsubsection @sc{soup} Groups
-@cindex nnsoup
+The second element can also be a function. In that case, it will be
+called with the first element of the rule as the argument, in a buffer
+containing the headers of the article. It should return a non-nil value
+if it thinks that the mail belongs in that group.
-@code{nnsoup} is the backend for reading @sc{soup} packets. It will
-read incoming packets, unpack them, and put them in a directory where
-you can read them at leisure.
+Nnmail users might recollect that the last regexp had to be empty to
+match all articles (like in the example above). This is not required in
+nnimap. Articles not matching any of the regexps will not be moved out
+of your inbox. (This might affect performance if you keep lots of
+unread articles in your inbox, since the splitting code would go over
+them every time you fetch new mail.)
-These are the variables you can use to customize its behavior:
+These rules are processed from the beginning of the alist toward the
+end. The first rule to make a match will "win", unless you have
+crossposting enabled. In that case, all matching rules will "win".
-@table @code
+This variable can also have a function as its value, the function will
+be called with the headers narrowed and should return a group where it
+thinks the article should be split to. See @code{nnimap-split-fancy}.
-@item nnsoup-tmp-directory
-@vindex nnsoup-tmp-directory
-When @code{nnsoup} unpacks a @sc{soup} packet, it does it in this
-directory. (@file{/tmp/} by default.)
+The splitting code tries to create mailboxes if it needs to.
-@item nnsoup-directory
-@vindex nnsoup-directory
-@code{nnsoup} then moves each message and index file to this directory.
-The default is @file{~/SOUP/}.
+To allow for different split rules on different virtual servers, and
+even different split rules in different inboxes on the same server,
+the syntax of this variable have been extended along the lines of:
-@item nnsoup-replies-directory
-@vindex nnsoup-replies-directory
-All replies will be stored in this directory before being packed into a
-reply packet. The default is @file{~/SOUP/replies/"}.
+@lisp
+(setq nnimap-split-rule
+ '(("my1server" (".*" (("ding" "ding@@gnus.org")
+ ("junk" "From:.*Simon")))
+ ("my2server" ("INBOX" nnimap-split-fancy))
+ ("my[34]server" (".*" (("private" "To:.*Simon")
+ ("junk" my-junk-func)))))
+@end lisp
-@item nnsoup-replies-format-type
-@vindex nnsoup-replies-format-type
-The @sc{soup} format of the replies packets. The default is @samp{?n}
-(rnews), and I don't think you should touch that variable. I probably
-shouldn't even have documented it. Drats! Too late!
+The virtual server name is in fact a regexp, so that the same rules
+may apply to several servers. In the example, the servers
+@code{my3server} and @code{my4server} both use the same rules.
+Similarly, the inbox string is also a regexp. The actual splitting
+rules are as before, either a function, or a list with group/regexp or
+group/function elements.
-@item nnsoup-replies-index-type
-@vindex nnsoup-replies-index-type
-The index type of the replies packet. The default is @samp{?n}, which
-means ``none''. Don't fiddle with this one either!
+Nnmail equivalent: @code{nnmail-split-methods}.
-@item nnsoup-active-file
-@vindex nnsoup-active-file
-Where @code{nnsoup} stores lots of information. This is not an ``active
-file'' in the @code{nntp} sense; it's an Emacs Lisp file. If you lose
-this file or mess it up in any way, you're dead. The default is
-@file{~/SOUP/active}.
+@item nnimap-split-predicate
+@cindex splitting
+@vindex nnimap-split-predicate
-@item nnsoup-packer
-@vindex nnsoup-packer
-Format string command for packing a reply @sc{soup} packet. The default
-is @samp{tar cf - %s | gzip > $HOME/Soupin%d.tgz}.
+Mail matching this predicate in @code{nnimap-split-inbox} will be
+split, it is a string and the default is @samp{UNSEEN UNDELETED}.
-@item nnsoup-unpacker
-@vindex nnsoup-unpacker
-Format string command for unpacking incoming @sc{soup} packets. The
-default is @samp{gunzip -c %s | tar xvf -}.
+This might be useful if you use another @sc{imap} client to read mail in
+your inbox but would like Gnus to split all articles in the inbox
+regardless of readedness. Then you might change this to
+@samp{UNDELETED}.
-@item nnsoup-packet-directory
-@vindex nnsoup-packet-directory
-Where @code{nnsoup} will look for incoming packets. The default is
-@file{~/}.
+@item nnimap-split-fancy
+@cindex splitting, fancy
+@findex nnimap-split-fancy
+@vindex nnimap-split-fancy
-@item nnsoup-packet-regexp
-@vindex nnsoup-packet-regexp
-Regular expression matching incoming @sc{soup} packets. The default is
-@samp{Soupout}.
+It's possible to set @code{nnimap-split-rule} to
+@code{nnmail-split-fancy} if you want to use fancy
+splitting. @xref{Fancy Mail Splitting}.
-@item nnsoup-always-save
-@vindex nnsoup-always-save
-If non-@code{nil}, save the replies buffer after each posted message.
+However, to be able to have different fancy split rules for nnmail and
+nnimap back ends you can set @code{nnimap-split-rule} to
+@code{nnimap-split-fancy} and define the nnimap specific fancy split
+rule in @code{nnimap-split-fancy}.
+
+Example:
+
+@lisp
+(setq nnimap-split-rule 'nnimap-split-fancy
+ nnimap-split-fancy ...)
+@end lisp
+
+Nnmail equivalent: @code{nnmail-split-fancy}.
+
+@item nnimap-split-download-body
+@findex nnimap-split-download-body
+@vindex nnimap-split-download-body
+
+Set to non-nil to download entire articles during splitting. This is
+generally not required, and will slow things down considerably. You
+may need it if you want to use an advanced splitting function that
+analyses the body to split the article.
@end table
+@node Expiring in IMAP
+@subsection Expiring in IMAP
+@cindex expiring imap mail
+
+Even though @sc{nnimap} is not a proper @sc{nnmail} derived back end,
+it supports most features in regular expiring (@pxref{Expiring Mail}).
+Unlike splitting in IMAP (@pxref{Splitting in IMAP}) it do not clone
+the @sc{nnmail} variables (i.e., creating @var{nnimap-expiry-wait})
+but reuse the @sc{nnmail} variables. What follows below are the
+variables used by the @sc{nnimap} expiry process.
+
+A note on how the expire mark is stored on the @sc{imap} server is
+appropriate here as well. The expire mark is translated into a
+@sc{imap} client specific mark, @code{gnus-expire}, and stored on the
+message. This means that likely only Gnus will understand and treat
+the @code{gnus-expire} mark properly, although other clients may allow
+you to view client specific flags on the message. It also means that
+your server must support permanent storage of client specific flags on
+messages. Most do, fortunately.
-@node SOUP Replies
-@subsubsection SOUP Replies
+@table @code
-Just using @code{nnsoup} won't mean that your postings and mailings end
-up in @sc{soup} reply packets automagically. You have to work a bit
-more for that to happen.
+@item nnmail-expiry-wait
+@item nnmail-expiry-wait-function
-@findex nnsoup-set-variables
-The @code{nnsoup-set-variables} command will set the appropriate
-variables to ensure that all your followups and replies end up in the
-@sc{soup} system.
+These variables are fully supported. The expire value can be a
+number, the symbol @var{immediate} or @var{never}.
-In specific, this is what it does:
+@item nnmail-expiry-target
-@lisp
-(setq message-send-news-function 'nnsoup-request-post)
-(setq message-send-mail-function 'nnsoup-request-mail)
-@end lisp
+This variable is supported, and internally implemented by calling the
+@sc{nnmail} functions that handle this. It contains an optimization
+that if the destination is a IMAP group on the same server, the
+article is copied instead of appended (that is, uploaded again).
-And that's it, really. If you only want news to go into the @sc{soup}
-system you just use the first line. If you only want mail to be
-@sc{soup}ed you use the second.
+@end table
+@node Editing IMAP ACLs
+@subsection Editing IMAP ACLs
+@cindex editing imap acls
+@cindex Access Control Lists
+@cindex Editing @sc{imap} ACLs
+@kindex G l
+@findex gnus-group-nnimap-edit-acl
-@node Web Searches
-@subsection Web Searches
-@cindex nnweb
-@cindex DejaNews
-@cindex Alta Vista
-@cindex InReference
-@cindex Usenet searches
-@cindex searching the Usenet
+ACL stands for Access Control List. ACLs are used in @sc{imap} for
+limiting (or enabling) other users access to your mail boxes. Not all
+@sc{imap} servers support this, this function will give an error if it
+doesn't.
-It's, like, too neat to search the Usenet for articles that match a
-string, but it, like, totally @emph{sucks}, like, totally, to use one of
-those, like, Web browsers, and you, like, have to, rilly, like, look at
-the commercials, so, like, with Gnus you can do @emph{rad}, rilly,
-searches without having to use a browser.
+To edit a ACL for a mailbox, type @kbd{G l}
+(@code{gnus-group-edit-nnimap-acl}) and you'll be presented with a ACL
+editing window with detailed instructions.
-The @code{nnweb} backend allows an easy interface to the mighty search
-engine. You create an @code{nnweb} group, enter a search pattern, and
-then enter the group and read the articles like you would any normal
-group. The @kbd{G w} command in the group buffer (@pxref{Foreign
-Groups}) will do this in an easy-to-use fashion.
+Some possible uses:
-@code{nnweb} groups don't really lend themselves to being solid
-groups---they have a very fleeting idea of article numbers. In fact,
-each time you enter an @code{nnweb} group (not even changing the search
-pattern), you are likely to get the articles ordered in a different
-manner. Not even using duplicate suppression (@pxref{Duplicate
-Suppression}) will help, since @code{nnweb} doesn't even know the
-@code{Message-ID} of the articles before reading them using some search
-engines (DejaNews, for instance). The only possible way to keep track
-of which articles you've read is by scoring on the @code{Date}
-header---mark all articles posted before the last date you read the
-group as read.
+@itemize @bullet
+@item
+Giving "anyone" the "lrs" rights (lookup, read, keep seen/unseen flags)
+on your mailing list mailboxes enables other users on the same server to
+follow the list without subscribing to it.
+@item
+At least with the Cyrus server, you are required to give the user
+"anyone" posting ("p") capabilities to have "plussing" work (that is,
+mail sent to user+mailbox@@domain ending up in the @sc{imap} mailbox
+INBOX.mailbox).
+@end itemize
-If the search engine changes its output substantially, @code{nnweb}
-won't be able to parse it and will fail. One could hardly fault the Web
-providers if they were to do this---their @emph{raison d'être} is to
-make money off of advertisements, not to provide services to the
-community. Since @code{nnweb} washes the ads off all the articles, one
-might think that the providers might be somewhat miffed. We'll see.
+@node Expunging mailboxes
+@subsection Expunging mailboxes
+@cindex expunging
-You must have the @code{url} and @code{w3} package installed to be able
-to use @code{nnweb}.
+@cindex Expunge
+@cindex Manual expunging
+@kindex G x
+@findex gnus-group-nnimap-expunge
-Virtual server variables:
+If you're using the @code{never} setting of @code{nnimap-expunge-on-close},
+you may want the option of expunging all deleted articles in a mailbox
+manually. This is exactly what @kbd{G x} does.
-@table @code
-@item nnweb-type
-@vindex nnweb-type
-What search engine type is being used. The currently supported types
-are @code{dejanews}, @code{dejanewsold}, @code{altavista} and
-@code{reference}.
+Currently there is no way of showing deleted articles, you can just
+delete them.
-@item nnweb-search
-@vindex nnweb-search
-The search string to feed to the search engine.
+@node A note on namespaces
+@subsection A note on namespaces
+@cindex IMAP namespace
+@cindex namespaces
-@item nnweb-max-hits
-@vindex nnweb-max-hits
-Advisory maximum number of hits per search to display. The default is
-100.
+The IMAP protocol has a concept called namespaces, described by the
+following text in the RFC:
-@item nnweb-type-definition
-@vindex nnweb-type-definition
-Type-to-definition alist. This alist says what @code{nnweb} should do
-with the various search engine types. The following elements must be
-present:
+@example
+5.1.2. Mailbox Namespace Naming Convention
+
+ By convention, the first hierarchical element of any mailbox name
+ which begins with "#" identifies the "namespace" of the remainder of
+ the name. This makes it possible to disambiguate between different
+ types of mailbox stores, each of which have their own namespaces.
+
+ For example, implementations which offer access to USENET
+ newsgroups MAY use the "#news" namespace to partition the USENET
+ newsgroup namespace from that of other mailboxes. Thus, the
+ comp.mail.misc newsgroup would have an mailbox name of
+ "#news.comp.mail.misc", and the name "comp.mail.misc" could refer
+ to a different object (e.g. a user's private mailbox).
+@end example
-@table @code
-@item article
-Function to decode the article and provide something that Gnus
-understands.
+While there is nothing in this text that warrants concern for the IMAP
+implementation in Gnus, some servers use namespace prefixes in a way
+that does not work with how Gnus uses mailbox names.
-@item map
-Function to create an article number to message header and URL alist.
+Specifically, University of Washington's IMAP server uses mailbox
+names like @code{#driver.mbx/read-mail} which are valid only in the
+@sc{create} and @sc{append} commands. After the mailbox is created
+(or a messages is appended to a mailbox), it must be accessed without
+the namespace prefix, i.e @code{read-mail}. Since Gnus do not make it
+possible for the user to guarantee that user entered mailbox names
+will only be used with the CREATE and APPEND commands, you should
+simply not use the namespace prefixed mailbox names in Gnus.
-@item search
-Function to send the search string to the search engine.
+See the UoW @sc{imapd} documentation for the @code{#driver.*/} prefix
+for more information on how to use the prefixes. They are a power
+tool and should be used only if you are sure what the effects are.
-@item address
-The address the aforementioned function should send the search string
-to.
+@node Other Sources
+@section Other Sources
-@item id
-Format string URL to fetch an article by @code{Message-ID}.
-@end table
+Gnus can do more than just read news or mail. The methods described
+below allow Gnus to view directories and files as if they were
+newsgroups.
-@end table
+@menu
+* Directory Groups:: You can read a directory as if it was a newsgroup.
+* Anything Groups:: Dired? Who needs dired?
+* Document Groups:: Single files can be the basis of a group.
+* SOUP:: Reading @sc{soup} packets ``offline''.
+* Mail-To-News Gateways:: Posting articles via mail-to-news gateways.
+@end menu
+@node Directory Groups
+@subsection Directory Groups
+@cindex nndir
+@cindex directory groups
-@node Mail-To-News Gateways
-@subsection Mail-To-News Gateways
-@cindex mail-to-news gateways
-@cindex gateways
+If you have a directory that has lots of articles in separate files in
+it, you might treat it as a newsgroup. The files have to have numerical
+names, of course.
-If your local @code{nntp} server doesn't allow posting, for some reason
-or other, you can post using one of the numerous mail-to-news gateways.
-The @code{nngateway} backend provides the interface.
+This might be an opportune moment to mention @code{ange-ftp} (and its
+successor @code{efs}), that most wonderful of all wonderful Emacs
+packages. When I wrote @code{nndir}, I didn't think much about it---a
+back end to read directories. Big deal.
-Note that you can't read anything from this backend---it can only be
-used to post with.
+@code{ange-ftp} changes that picture dramatically. For instance, if you
+enter the @code{ange-ftp} file name
+@file{/ftp.hpc.uh.edu:/pub/emacs/ding-list/} as the directory name,
+@code{ange-ftp} or @code{efs} will actually allow you to read this
+directory over at @samp{sina} as a newsgroup. Distributed news ahoy!
-Server variables:
+@code{nndir} will use @sc{nov} files if they are present.
-@table @code
-@item nngateway-address
-@vindex nngateway-address
-This is the address of the mail-to-news gateway.
+@code{nndir} is a ``read-only'' back end---you can't delete or expire
+articles with this method. You can use @code{nnmh} or @code{nnml} for
+whatever you use @code{nndir} for, so you could switch to any of those
+methods if you feel the need to have a non-read-only @code{nndir}.
-@item nngateway-header-transformation
-@vindex nngateway-header-transformation
-News headers often have to be transformed in some odd way or other
-for the mail-to-news gateway to accept it. This variable says what
-transformation should be called, and defaults to
-@code{nngateway-simple-header-transformation}. The function is called
-narrowed to the headers to be transformed and with one parameter---the
-gateway address.
-This default function just inserts a new @code{To} header based on the
-@code{Newsgroups} header and the gateway address.
-For instance, an article with this @code{Newsgroups} header:
+@node Anything Groups
+@subsection Anything Groups
+@cindex nneething
-@example
-Newsgroups: alt.religion.emacs
-@end example
+From the @code{nndir} back end (which reads a single spool-like
+directory), it's just a hop and a skip to @code{nneething}, which
+pretends that any arbitrary directory is a newsgroup. Strange, but
+true.
-will get this @code{From} header inserted:
+When @code{nneething} is presented with a directory, it will scan this
+directory and assign article numbers to each file. When you enter such
+a group, @code{nneething} must create ``headers'' that Gnus can use.
+After all, Gnus is a newsreader, in case you're forgetting.
+@code{nneething} does this in a two-step process. First, it snoops each
+file in question. If the file looks like an article (i.e., the first
+few lines look like headers), it will use this as the head. If this is
+just some arbitrary file without a head (e.g. a C source file),
+@code{nneething} will cobble up a header out of thin air. It will use
+file ownership, name and date and do whatever it can with these
+elements.
-@example
-To: alt-religion-emacs@@GATEWAY
-@end example
+All this should happen automatically for you, and you will be presented
+with something that looks very much like a newsgroup. Totally like a
+newsgroup, to be precise. If you select an article, it will be displayed
+in the article buffer, just as usual.
-The following pre-defined functions exist:
+If you select a line that represents a directory, Gnus will pop you into
+a new summary buffer for this @code{nneething} group. And so on. You can
+traverse the entire disk this way, if you feel like, but remember that
+Gnus is not dired, really, and does not intend to be, either.
+
+There are two overall modes to this action---ephemeral or solid. When
+doing the ephemeral thing (i.e., @kbd{G D} from the group buffer), Gnus
+will not store information on what files you have read, and what files
+are new, and so on. If you create a solid @code{nneething} group the
+normal way with @kbd{G m}, Gnus will store a mapping table between
+article numbers and file names, and you can treat this group like any
+other groups. When you activate a solid @code{nneething} group, you will
+be told how many unread articles it contains, etc., etc.
+
+Some variables:
-@findex nngateway-simple-header-transformation
@table @code
+@item nneething-map-file-directory
+@vindex nneething-map-file-directory
+All the mapping files for solid @code{nneething} groups will be stored
+in this directory, which defaults to @file{~/.nneething/}.
-@item nngateway-simple-header-transformation
-Creates a @code{To} header that looks like
-@var{newsgroup}@@@code{nngateway-address}.
+@item nneething-exclude-files
+@vindex nneething-exclude-files
+All files that match this regexp will be ignored. Nice to use to exclude
+auto-save files and the like, which is what it does by default.
-@findex nngateway-mail2news-header-transformation
+@item nneething-include-files
+@vindex nneething-include-files
+Regexp saying what files to include in the group. If this variable is
+non-@code{nil}, only files matching this regexp will be included.
-@item nngateway-mail2news-header-transformation
-Creates a @code{To} header that looks like
-@code{nngateway-address}.
+@item nneething-map-file
+@vindex nneething-map-file
+Name of the map files.
+@end table
-Here's an example:
-@lisp
-(setq gnus-post-method
- '(nngateway "mail2news@@replay.com"
- (nngateway-header-transformation
- nngateway-mail2news-header-transformation)))
-@end lisp
+@node Document Groups
+@subsection Document Groups
+@cindex nndoc
+@cindex documentation group
+@cindex help group
-@end table
+@code{nndoc} is a cute little thing that will let you read a single file
+as a newsgroup. Several files types are supported:
+@table @code
+@cindex babyl
+@cindex rmail mbox
-@end table
+@item babyl
+The babyl (rmail) mail box.
+@cindex mbox
+@cindex Unix mbox
-So, to use this, simply say something like:
+@item mbox
+The standard Unix mbox file.
-@lisp
-(setq gnus-post-method '(nngateway "GATEWAY.ADDRESS"))
-@end lisp
+@cindex MMDF mail box
+@item mmdf
+The MMDF mail box format.
+@item news
+Several news articles appended into a file.
-@node Combined Groups
-@section Combined Groups
+@item rnews
+@cindex rnews batch files
+The rnews batch transport format.
+@cindex forwarded messages
-Gnus allows combining a mixture of all the other group types into bigger
-groups.
+@item forward
+Forwarded articles.
-@menu
-* Virtual Groups:: Combining articles from many groups.
-* Kibozed Groups:: Looking through parts of the newsfeed for articles.
-@end menu
+@item nsmail
+Netscape mail boxes.
+@item mime-parts
+@sc{mime} multipart messages.
-@node Virtual Groups
-@subsection Virtual Groups
-@cindex nnvirtual
-@cindex virtual groups
-@cindex merging groups
+@item standard-digest
+The standard (RFC 1153) digest format.
-An @dfn{nnvirtual group} is really nothing more than a collection of
-other groups.
+@item mime-digest
+A @sc{mime} digest of messages.
-For instance, if you are tired of reading many small groups, you can
-put them all in one big group, and then grow tired of reading one
-big, unwieldy group. The joys of computing!
+@item lanl-gov-announce
+Announcement messages from LANL Gov Announce.
-You specify @code{nnvirtual} as the method. The address should be a
-regexp to match component groups.
+@item rfc822-forward
+A message forwarded according to RFC822.
-All marks in the virtual group will stick to the articles in the
-component groups. So if you tick an article in a virtual group, the
-article will also be ticked in the component group from whence it came.
-(And vice versa---marks from the component groups will also be shown in
-the virtual group.)
+@item outlook
+The Outlook mail box.
-Here's an example @code{nnvirtual} method that collects all Andrea Dworkin
-newsgroups into one, big, happy newsgroup:
+@item oe-dbx
+The Outlook Express dbx mail box.
-@lisp
-(nnvirtual "^alt\\.fan\\.andrea-dworkin$\\|^rec\\.dworkin.*")
-@end lisp
+@item exim-bounce
+A bounce message from the Exim MTA.
-The component groups can be native or foreign; everything should work
-smoothly, but if your computer explodes, it was probably my fault.
+@item forward
+A message forwarded according to informal rules.
-Collecting the same group from several servers might actually be a good
-idea if users have set the Distribution header to limit distribution.
-If you would like to read @samp{soc.motss} both from a server in Japan
-and a server in Norway, you could use the following as the group regexp:
+@item rfc934
+An RFC934-forwarded message.
-@example
-"^nntp\\+server\\.jp:soc\\.motss$\\|^nntp\\+server\\.no:soc\\.motss$"
-@end example
+@item mailman
+A mailman digest.
-(Remember, though, that if you're creating the group with @kbd{G m}, you
-shouldn't double the backslashes, and you should leave off the quote
-characters at the beginning and the end of the string.)
+@item clari-briefs
+A digest of Clarinet brief news items.
-This should work kinda smoothly---all articles from both groups should
-end up in this one, and there should be no duplicates. Threading (and
-the rest) will still work as usual, but there might be problems with the
-sequence of articles. Sorting on date might be an option here
-(@pxref{Selecting a Group}).
+@item slack-digest
+Non-standard digest format---matches most things, but does it badly.
-One limitation, however---all groups included in a virtual
-group have to be alive (i.e., subscribed or unsubscribed). Killed or
-zombie groups can't be component groups for @code{nnvirtual} groups.
+@item mail-in-mail
+The last resort.
+@end table
-@vindex nnvirtual-always-rescan
-If the @code{nnvirtual-always-rescan} is non-@code{nil},
-@code{nnvirtual} will always scan groups for unread articles when
-entering a virtual group. If this variable is @code{nil} (which is the
-default) and you read articles in a component group after the virtual
-group has been activated, the read articles from the component group
-will show up when you enter the virtual group. You'll also see this
-effect if you have two virtual groups that have a component group in
-common. If that's the case, you should set this variable to @code{t}.
-Or you can just tap @code{M-g} on the virtual group every time before
-you enter it---it'll have much the same effect.
+You can also use the special ``file type'' @code{guess}, which means
+that @code{nndoc} will try to guess what file type it is looking at.
+@code{digest} means that @code{nndoc} should guess what digest type the
+file is.
-@code{nnvirtual} can have both mail and news groups as component groups.
-When responding to articles in @code{nnvirtual} groups, @code{nnvirtual}
-has to ask the backend of the component group the article comes from
-whether it is a news or mail backend. However, when you do a @kbd{^},
-there is typically no sure way for the component backend to know this,
-and in that case @code{nnvirtual} tells Gnus that the article came from a
-not-news backend. (Just to be on the safe side.)
+@code{nndoc} will not try to change the file or insert any extra headers into
+it---it will simply, like, let you use the file as the basis for a
+group. And that's it.
-@kbd{C-c C-t} in the message buffer will insert the @code{Newsgroups}
-line from the article you respond to in these cases.
+If you have some old archived articles that you want to insert into your
+new & spiffy Gnus mail back end, @code{nndoc} can probably help you with
+that. Say you have an old @file{RMAIL} file with mail that you now want
+to split into your new @code{nnml} groups. You look at that file using
+@code{nndoc} (using the @kbd{G f} command in the group buffer
+(@pxref{Foreign Groups})), set the process mark on all the articles in
+the buffer (@kbd{M P b}, for instance), and then re-spool (@kbd{B r})
+using @code{nnml}. If all goes well, all the mail in the @file{RMAIL}
+file is now also stored in lots of @code{nnml} directories, and you can
+delete that pesky @file{RMAIL} file. If you have the guts!
+Virtual server variables:
+@table @code
+@item nndoc-article-type
+@vindex nndoc-article-type
+This should be one of @code{mbox}, @code{babyl}, @code{digest},
+@code{news}, @code{rnews}, @code{mmdf}, @code{forward}, @code{rfc934},
+@code{rfc822-forward}, @code{mime-parts}, @code{standard-digest},
+@code{slack-digest}, @code{clari-briefs}, @code{nsmail}, @code{outlook},
+@code{oe-dbx}, @code{mailman}, and @code{mail-in-mail} or @code{guess}.
-@node Kibozed Groups
-@subsection Kibozed Groups
-@cindex nnkiboze
-@cindex kibozing
+@item nndoc-post-type
+@vindex nndoc-post-type
+This variable says whether Gnus is to consider the group a news group or
+a mail group. There are two valid values: @code{mail} (the default)
+and @code{news}.
+@end table
-@dfn{Kibozing} is defined by @sc{oed} as ``grepping through (parts of)
-the news feed''. @code{nnkiboze} is a backend that will do this for
-you. Oh joy! Now you can grind any @sc{nntp} server down to a halt
-with useless requests! Oh happiness!
+@menu
+* Document Server Internals:: How to add your own document types.
+@end menu
-@kindex G k (Group)
-To create a kibozed group, use the @kbd{G k} command in the group
-buffer.
-The address field of the @code{nnkiboze} method is, as with
-@code{nnvirtual}, a regexp to match groups to be ``included'' in the
-@code{nnkiboze} group. That's where most similarities between @code{nnkiboze}
-and @code{nnvirtual} end.
+@node Document Server Internals
+@subsubsection Document Server Internals
-In addition to this regexp detailing component groups, an @code{nnkiboze} group
-must have a score file to say what articles are to be included in
-the group (@pxref{Scoring}).
+Adding new document types to be recognized by @code{nndoc} isn't
+difficult. You just have to whip up a definition of what the document
+looks like, write a predicate function to recognize that document type,
+and then hook into @code{nndoc}.
-@kindex M-x nnkiboze-generate-groups
-@findex nnkiboze-generate-groups
-You must run @kbd{M-x nnkiboze-generate-groups} after creating the
-@code{nnkiboze} groups you want to have. This command will take time. Lots of
-time. Oodles and oodles of time. Gnus has to fetch the headers from
-all the articles in all the component groups and run them through the
-scoring process to determine if there are any articles in the groups
-that are to be part of the @code{nnkiboze} groups.
+First, here's an example document type definition:
-Please limit the number of component groups by using restrictive
-regexps. Otherwise your sysadmin may become annoyed with you, and the
-@sc{nntp} site may throw you off and never let you back in again.
-Stranger things have happened.
+@example
+(mmdf
+ (article-begin . "^\^A\^A\^A\^A\n")
+ (body-end . "^\^A\^A\^A\^A\n"))
+@end example
-@code{nnkiboze} component groups do not have to be alive---they can be dead,
-and they can be foreign. No restrictions.
+The definition is simply a unique @dfn{name} followed by a series of
+regexp pseudo-variable settings. Below are the possible
+variables---don't be daunted by the number of variables; most document
+types can be defined with very few settings:
-@vindex nnkiboze-directory
-The generation of an @code{nnkiboze} group means writing two files in
-@code{nnkiboze-directory}, which is @file{~/News/} by default. One
-contains the @sc{nov} header lines for all the articles in the group,
-and the other is an additional @file{.newsrc} file to store information
-on what groups have been searched through to find component articles.
+@table @code
+@item first-article
+If present, @code{nndoc} will skip past all text until it finds
+something that match this regexp. All text before this will be
+totally ignored.
-Articles marked as read in the @code{nnkiboze} group will have
-their @sc{nov} lines removed from the @sc{nov} file.
+@item article-begin
+This setting has to be present in all document type definitions. It
+says what the beginning of each article looks like.
+@item head-begin-function
+If present, this should be a function that moves point to the head of
+the article.
-@node Gnus Unplugged
-@section Gnus Unplugged
-@cindex offline
-@cindex unplugged
-@cindex Agent
-@cindex Gnus Agent
-@cindex Gnus Unplugged
+@item nndoc-head-begin
+If present, this should be a regexp that matches the head of the
+article.
-In olden times (ca. February '88), people used to run their newsreaders
-on big machines with permanent connections to the net. News transport
-was dealt with by news servers, and all the newsreaders had to do was to
-read news. Believe it or not.
+@item nndoc-head-end
+This should match the end of the head of the article. It defaults to
+@samp{^$}---the empty line.
-Nowadays most people read news and mail at home, and use some sort of
-modem to connect to the net. To avoid running up huge phone bills, it
-would be nice to have a way to slurp down all the news and mail, hang up
-the phone, read for several hours, and then upload any responses you
-have to make. And then you repeat the procedure.
+@item body-begin-function
+If present, this function should move point to the beginning of the body
+of the article.
-Of course, you can use news servers for doing this as well. I've used
-@code{inn} together with @code{slurp}, @code{pop} and @code{sendmail}
-for some years, but doing that's a bore. Moving the news server
-functionality up to the newsreader makes sense if you're the only person
-reading news on a machine.
+@item body-begin
+This should match the beginning of the body of the article. It defaults
+to @samp{^\n}.
-Using Gnus as an ``offline'' newsreader is quite simple.
+@item body-end-function
+If present, this function should move point to the end of the body of
+the article.
-@itemize @bullet
-@item
-First, set up Gnus as you would do if you were running it on a machine
-that has full connection to the net. Go ahead. I'll still be waiting
-here.
+@item body-end
+If present, this should match the end of the body of the article.
-@item
-Then, put the following magical incantation at the end of your
-@file{.gnus.el} file:
+@item file-end
+If present, this should match the end of the file. All text after this
+regexp will be totally ignored.
-@lisp
-(gnus-agentize)
-@end lisp
-@end itemize
+@end table
-That's it. Gnus is now an ``offline'' newsreader.
+So, using these variables @code{nndoc} is able to dissect a document
+file into a series of articles, each with a head and a body. However, a
+few more variables are needed since not all document types are all that
+news-like---variables needed to transform the head or the body into
+something that's palatable for Gnus:
-Of course, to use it as such, you have to learn a few new commands.
+@table @code
+@item prepare-body-function
+If present, this function will be called when requesting an article. It
+will be called with point at the start of the body, and is useful if the
+document has encoded some parts of its contents.
-@menu
-* Agent Basics:: How it all is supposed to work.
-* Agent Categories:: How to tell the Gnus Agent what to download.
-* Agent Commands:: New commands for all the buffers.
-* Agent Expiry:: How to make old articles go away.
-* Outgoing Messages:: What happens when you post/mail something?
-* Agent Variables:: Customizing is fun.
-* Example Setup:: An example @file{.gnus.el} file for offline people.
-* Batching Agents:: How to fetch news from a @code{cron} job.
-* Agent Caveats:: What you think it'll do and what it does.
-@end menu
+@item article-transform-function
+If present, this function is called when requesting an article. It's
+meant to be used for more wide-ranging transformation of both head and
+body of the article.
+@item generate-head-function
+If present, this function is called to generate a head that Gnus can
+understand. It is called with the article number as a parameter, and is
+expected to generate a nice head for the article in question. It is
+called when requesting the headers of all articles.
-@node Agent Basics
-@subsection Agent Basics
+@end table
-First, let's get some terminology out of the way.
+Let's look at the most complicated example I can come up with---standard
+digests:
-The Gnus Agent is said to be @dfn{unplugged} when you have severed the
-connection to the net (and notified the Agent that this is the case).
-When the connection to the net is up again (and Gnus knows this), the
-Agent is @dfn{plugged}.
+@example
+(standard-digest
+ (first-article . ,(concat "^" (make-string 70 ?-) "\n\n+"))
+ (article-begin . ,(concat "\n\n" (make-string 30 ?-) "\n\n+"))
+ (prepare-body-function . nndoc-unquote-dashes)
+ (body-end-function . nndoc-digest-body-end)
+ (head-end . "^ ?$")
+ (body-begin . "^ ?\n")
+ (file-end . "^End of .*digest.*[0-9].*\n\\*\\*\\|^End of.*Digest *$")
+ (subtype digest guess))
+@end example
-The @dfn{local} machine is the one you're running on, and which isn't
-connected to the net continuously.
+We see that all text before a 70-width line of dashes is ignored; all
+text after a line that starts with that @samp{^End of} is also ignored;
+each article begins with a 30-width line of dashes; the line separating
+the head from the body may contain a single space; and that the body is
+run through @code{nndoc-unquote-dashes} before being delivered.
-@dfn{Downloading} means fetching things from the net to your local
-machine. @dfn{Uploading} is doing the opposite.
+To hook your own document definition into @code{nndoc}, use the
+@code{nndoc-add-type} function. It takes two parameters---the first is
+the definition itself and the second (optional) parameter says where in
+the document type definition alist to put this definition. The alist is
+traversed sequentially, and @code{nndoc-TYPE-type-p} is called for a given type @code{TYPE}. So @code{nndoc-mmdf-type-p} is called to see whether a document
+is of @code{mmdf} type, and so on. These type predicates should return
+@code{nil} if the document is not of the correct type; @code{t} if it is
+of the correct type; and a number if the document might be of the
+correct type. A high number means high probability; a low number means
+low probability with @samp{0} being the lowest valid number.
-Let's take a typical Gnus session using the Agent.
-@itemize @bullet
+@node SOUP
+@subsection SOUP
+@cindex SOUP
+@cindex offline
-@item
-You start Gnus with @code{gnus-unplugged}. This brings up the Gnus
-Agent in a disconnected state. You can read all the news that you have
-already fetched while in this mode.
+In the PC world people often talk about ``offline'' newsreaders. These
+are thingies that are combined reader/news transport monstrosities.
+With built-in modem programs. Yecchh!
-@item
-You then decide to see whether any new news has arrived. You connect
-your machine to the net (using PPP or whatever), and then hit @kbd{J j}
-to make Gnus become @dfn{plugged}.
+Of course, us Unix Weenie types of human beans use things like
+@code{uucp} and, like, @code{nntpd} and set up proper news and mail
+transport things like Ghod intended. And then we just use normal
+newsreaders.
-@item
-You can then read the new news immediately, or you can download the news
-onto your local machine. If you want to do the latter, you press @kbd{J
-s} to fetch all the eligible articles in all the groups. (To let Gnus
-know which articles you want to download, @pxref{Agent Categories}.)
+However, it can sometimes be convenient to do something that's a bit
+easier on the brain if you have a very slow modem, and you're not really
+that interested in doing things properly.
-@item
-After fetching the articles, you press @kbd{J j} to make Gnus become
-unplugged again, and you shut down the PPP thing (or whatever). And
-then you read the news offline.
+A file format called @sc{soup} has been developed for transporting news
+and mail from servers to home machines and back again. It can be a bit
+fiddly.
-@item
-And then you go to step 2.
-@end itemize
-
-Here are some things you should do the first time (or so) that you use
-the Agent.
-
-@itemize @bullet
+First some terminology:
-@item
-Decide which servers should be covered by the Agent. If you have a mail
-backend, it would probably be nonsensical to have it covered by the
-Agent. Go to the server buffer (@kbd{^} in the group buffer) and press
-@kbd{J a} the server (or servers) that you wish to have covered by the
-Agent (@pxref{Server Agent Commands}). This will typically be only the
-primary select method, which is listed on the bottom in the buffer.
+@table @dfn
-@item
-Decide on download policy. @xref{Agent Categories}.
+@item server
+This is the machine that is connected to the outside world and where you
+get news and/or mail from.
-@item
-Uhm... that's it.
-@end itemize
+@item home machine
+This is the machine that you want to do the actual reading and responding
+on. It is typically not connected to the rest of the world in any way.
+@item packet
+Something that contains messages and/or commands. There are two kinds
+of packets:
-@node Agent Categories
-@subsection Agent Categories
+@table @dfn
+@item message packets
+These are packets made at the server, and typically contain lots of
+messages for you to read. These are called @file{SoupoutX.tgz} by
+default, where @var{x} is a number.
-One of the main reasons to integrate the news transport layer into the
-newsreader is to allow greater control over what articles to download.
-There's not much point in downloading huge amounts of articles, just to
-find out that you're not interested in reading any of them. It's better
-to be somewhat more conservative in choosing what to download, and then
-mark the articles for downloading manually if it should turn out that
-you're interested in the articles anyway.
+@item response packets
+These are packets made at the home machine, and typically contains
+replies that you've written. These are called @file{SoupinX.tgz} by
+default, where @var{x} is a number.
-The main way to control what is to be downloaded is to create a
-@dfn{category} and then assign some (or all) groups to this category.
-Groups that do not belong in any other category belong to the
-@code{default} category. Gnus has its own buffer for creating and
-managing categories.
+@end table
-@menu
-* Category Syntax:: What a category looks like.
-* The Category Buffer:: A buffer for maintaining categories.
-* Category Variables:: Customize'r'Us.
-@end menu
+@end table
-@node Category Syntax
-@subsubsection Category Syntax
+@enumerate
-A category consists of two things.
+@item
+You log in on the server and create a @sc{soup} packet. You can either
+use a dedicated @sc{soup} thingie (like the @code{awk} program), or you
+can use Gnus to create the packet with its @sc{soup} commands (@kbd{O
+s} and/or @kbd{G s b}; and then @kbd{G s p}) (@pxref{SOUP Commands}).
-@enumerate
@item
-A predicate which (generally) gives a rough outline of which articles
-are eligible for downloading; and
+You transfer the packet home. Rail, boat, car or modem will do fine.
@item
-a score rule which (generally) gives you a finer granularity when
-deciding what articles to download. (Note that this @dfn{download
-score} is not necessarily related to normal scores.)
-@end enumerate
+You put the packet in your home directory.
-A predicate in its simplest form can be a single predicate such as
-@code{true} or @code{false}. These two will download every available
-article or nothing respectively. In the case of these two special
-predicates an additional score rule is superfluous.
+@item
+You fire up Gnus on your home machine using the @code{nnsoup} back end as
+the native or secondary server.
-Predicates of @code{high} or @code{low} download articles in respect of
-their scores in relationship to @code{gnus-agent-high-score} and
-@code{gnus-agent-low-score} as descibed below.
+@item
+You read articles and mail and answer and followup to the things you
+want (@pxref{SOUP Replies}).
-To gain even finer control of what is to be regarded eligible for
-download a predicate can consist of a number of predicates with logical
-operators sprinkled in between.
+@item
+You do the @kbd{G s r} command to pack these replies into a @sc{soup}
+packet.
-Perhaps some examples are in order.
+@item
+You transfer this packet to the server.
-Here's a simple predicate. (It's the default predicate, in fact, used
-for all groups that don't belong to any other category.)
+@item
+You use Gnus to mail this packet out with the @kbd{G s s} command.
-@lisp
-short
-@end lisp
+@item
+You then repeat until you die.
-Quite simple, eh? This predicate is true if and only if the article is
-short (for some value of ``short'').
+@end enumerate
-Here's a more complex predicate:
+So you basically have a bipartite system---you use @code{nnsoup} for
+reading and Gnus for packing/sending these @sc{soup} packets.
-@lisp
-(or high
- (and
- (not low)
- (not long)))
-@end lisp
+@menu
+* SOUP Commands:: Commands for creating and sending @sc{soup} packets
+* SOUP Groups:: A back end for reading @sc{soup} packets.
+* SOUP Replies:: How to enable @code{nnsoup} to take over mail and news.
+@end menu
-This means that an article should be downloaded if it has a high score,
-or if the score is not low and the article is not long. You get the
-drift.
-The available logical operators are @code{or}, @code{and} and
-@code{not}. (If you prefer, you can use the more ``C''-ish operators
-@samp{|}, @code{&} and @code{!} instead.)
+@node SOUP Commands
+@subsubsection SOUP Commands
-The following predicates are pre-defined, but if none of these fit what
-you want to do, you can write your own.
+These are commands for creating and manipulating @sc{soup} packets.
-@table @code
-@item short
-True iff the article is shorter than @code{gnus-agent-short-article}
-lines; default 100.
+@table @kbd
+@item G s b
+@kindex G s b (Group)
+@findex gnus-group-brew-soup
+Pack all unread articles in the current group
+(@code{gnus-group-brew-soup}). This command understands the
+process/prefix convention.
-@item long
-True iff the article is longer than @code{gnus-agent-long-article}
-lines; default 200.
+@item G s w
+@kindex G s w (Group)
+@findex gnus-soup-save-areas
+Save all @sc{soup} data files (@code{gnus-soup-save-areas}).
-@item low
-True iff the article has a download score less than
-@code{gnus-agent-low-score}; default 0.
+@item G s s
+@kindex G s s (Group)
+@findex gnus-soup-send-replies
+Send all replies from the replies packet
+(@code{gnus-soup-send-replies}).
-@item high
-True iff the article has a download score greater than
-@code{gnus-agent-high-score}; default 0.
+@item G s p
+@kindex G s p (Group)
+@findex gnus-soup-pack-packet
+Pack all files into a @sc{soup} packet (@code{gnus-soup-pack-packet}).
-@item spam
-True iff the Gnus Agent guesses that the article is spam. The
-heuristics may change over time, but at present it just computes a
-checksum and sees whether articles match.
+@item G s r
+@kindex G s r (Group)
+@findex nnsoup-pack-replies
+Pack all replies into a replies packet (@code{nnsoup-pack-replies}).
-@item true
-Always true.
+@item O s
+@kindex O s (Summary)
+@findex gnus-soup-add-article
+This summary-mode command adds the current article to a @sc{soup} packet
+(@code{gnus-soup-add-article}). It understands the process/prefix
+convention (@pxref{Process/Prefix}).
-@item false
-Always false.
@end table
-If you want to create your own predicate function, here's what you have
-to know: The functions are called with no parameters, but the
-@code{gnus-headers} and @code{gnus-score} dynamic variables are bound to
-useful values.
-
-For example, you could decide that you don't want to download articles
-that were posted more than a certain number of days ago (e.g. posted
-more than @code{gnus-agent-expire-days} ago) you might write a function
-something along the lines of the following:
-@lisp
-(defun my-article-old-p ()
- "Say whether an article is old."
- (< (time-to-days (date-to-time (mail-header-date gnus-headers)))
- (- (time-to-days (current-time)) gnus-agent-expire-days)))
-@end lisp
+There are a few variables to customize where Gnus will put all these
+thingies:
-with the predicate then defined as:
+@table @code
-@lisp
-(not my-article-old-p)
-@end lisp
+@item gnus-soup-directory
+@vindex gnus-soup-directory
+Directory where Gnus will save intermediate files while composing
+@sc{soup} packets. The default is @file{~/SoupBrew/}.
-or you could append your predicate to the predefined
-@code{gnus-category-predicate-alist} in your @file{~/.gnus.el} or
-wherever. (Note: this would have to be at a point *after*
-@code{gnus-agent} has been loaded via @code{(gnus-agentize)})
+@item gnus-soup-replies-directory
+@vindex gnus-soup-replies-directory
+This is what Gnus will use as a temporary directory while sending our
+reply packets. @file{~/SoupBrew/SoupReplies/} is the default.
-@lisp
-(defvar gnus-category-predicate-alist
- (append gnus-category-predicate-alist
- '((old . my-article-old-p))))
-@end lisp
+@item gnus-soup-prefix-file
+@vindex gnus-soup-prefix-file
+Name of the file where Gnus stores the last used prefix. The default is
+@samp{gnus-prefix}.
-and simply specify your predicate as:
+@item gnus-soup-packer
+@vindex gnus-soup-packer
+A format string command for packing a @sc{soup} packet. The default is
+@samp{tar cf - %s | gzip > $HOME/Soupout%d.tgz}.
-@lisp
-(not old)
-@end lisp
+@item gnus-soup-unpacker
+@vindex gnus-soup-unpacker
+Format string command for unpacking a @sc{soup} packet. The default is
+@samp{gunzip -c %s | tar xvf -}.
-If/when using something like the above, be aware that there are many
-misconfigured systems/mailers out there and so an article's date is not
-always a reliable indication of when it was posted. Hell, some people
-just don't give a damm.
+@item gnus-soup-packet-directory
+@vindex gnus-soup-packet-directory
+Where Gnus will look for reply packets. The default is @file{~/}.
+@item gnus-soup-packet-regexp
+@vindex gnus-soup-packet-regexp
+Regular expression matching @sc{soup} reply packets in
+@code{gnus-soup-packet-directory}.
-The above predicates apply to *all* the groups which belong to the
-category. However, if you wish to have a specific predicate for an
-individual group within a category, or you're just too lazy to set up a
-new category, you can enter a group's individual predicate in it's group
-parameters like so:
+@end table
-@lisp
-(agent-predicate . short)
-@end lisp
-This is the group parameter equivalent of the agent category
-default. Note that when specifying a single word predicate like this,
-the @code{agent-predicate} specification must be in dotted pair
-notation.
+@node SOUP Groups
+@subsubsection SOUP Groups
+@cindex nnsoup
-The equivalent of the longer example from above would be:
+@code{nnsoup} is the back end for reading @sc{soup} packets. It will
+read incoming packets, unpack them, and put them in a directory where
+you can read them at leisure.
-@lisp
-(agent-predicate or high (and (not low) (not long)))
-@end lisp
+These are the variables you can use to customize its behavior:
-The outer parenthesis required in the category specification are not
-entered here as, not being in dotted pair notation, the value of the
-predicate is assumed to be a list.
+@table @code
+@item nnsoup-tmp-directory
+@vindex nnsoup-tmp-directory
+When @code{nnsoup} unpacks a @sc{soup} packet, it does it in this
+directory. (@file{/tmp/} by default.)
-Now, the syntax of the download score is the same as the syntax of
-normal score files, except that all elements that require actually
-seeing the article itself are verboten. This means that only the
-following headers can be scored on: @code{Subject}, @code{From},
-@code{Date}, @code{Message-ID}, @code{References}, @code{Chars},
-@code{Lines}, and @code{Xref}.
-
-As with predicates, the specification of the @code{download score rule}
-to use in respect of a group can be in either the category definition if
-it's to be applicable to all groups in therein, or a group's parameters
-if it's to be specific to that group.
+@item nnsoup-directory
+@vindex nnsoup-directory
+@code{nnsoup} then moves each message and index file to this directory.
+The default is @file{~/SOUP/}.
-In both of these places the @code{download score rule} can take one of
-three forms:
+@item nnsoup-replies-directory
+@vindex nnsoup-replies-directory
+All replies will be stored in this directory before being packed into a
+reply packet. The default is @file{~/SOUP/replies/"}.
-@enumerate
-@item
-Score rule
+@item nnsoup-replies-format-type
+@vindex nnsoup-replies-format-type
+The @sc{soup} format of the replies packets. The default is @samp{?n}
+(rnews), and I don't think you should touch that variable. I probably
+shouldn't even have documented it. Drats! Too late!
-This has the same syntax as a normal gnus score file except only a
-subset of scoring keywords are available as mentioned above.
+@item nnsoup-replies-index-type
+@vindex nnsoup-replies-index-type
+The index type of the replies packet. The default is @samp{?n}, which
+means ``none''. Don't fiddle with this one either!
-example:
+@item nnsoup-active-file
+@vindex nnsoup-active-file
+Where @code{nnsoup} stores lots of information. This is not an ``active
+file'' in the @code{nntp} sense; it's an Emacs Lisp file. If you lose
+this file or mess it up in any way, you're dead. The default is
+@file{~/SOUP/active}.
-@itemize @bullet
-@item
-Category specification
+@item nnsoup-packer
+@vindex nnsoup-packer
+Format string command for packing a reply @sc{soup} packet. The default
+is @samp{tar cf - %s | gzip > $HOME/Soupin%d.tgz}.
-@lisp
-(("from"
- ("Lars Ingebrigtsen" 1000000 nil s))
-("lines"
- (500 -100 nil <)))
-@end lisp
+@item nnsoup-unpacker
+@vindex nnsoup-unpacker
+Format string command for unpacking incoming @sc{soup} packets. The
+default is @samp{gunzip -c %s | tar xvf -}.
-@item
-Group Parameter specification
+@item nnsoup-packet-directory
+@vindex nnsoup-packet-directory
+Where @code{nnsoup} will look for incoming packets. The default is
+@file{~/}.
-@lisp
-(agent-score ("from"
- ("Lars Ingebrigtsen" 1000000 nil s))
- ("lines"
- (500 -100 nil <)))
-@end lisp
+@item nnsoup-packet-regexp
+@vindex nnsoup-packet-regexp
+Regular expression matching incoming @sc{soup} packets. The default is
+@samp{Soupout}.
-Again, note the omission of the outermost parenthesis here.
-@end itemize
+@item nnsoup-always-save
+@vindex nnsoup-always-save
+If non-@code{nil}, save the replies buffer after each posted message.
-@item
-Agent score file
+@end table
-These score files must *only* contain the permitted scoring keywords
-stated above.
-example:
+@node SOUP Replies
+@subsubsection SOUP Replies
-@itemize @bullet
-@item
-Category specification
+Just using @code{nnsoup} won't mean that your postings and mailings end
+up in @sc{soup} reply packets automagically. You have to work a bit
+more for that to happen.
-@lisp
-("~/News/agent.SCORE")
-@end lisp
+@findex nnsoup-set-variables
+The @code{nnsoup-set-variables} command will set the appropriate
+variables to ensure that all your followups and replies end up in the
+@sc{soup} system.
-or perhaps
+In specific, this is what it does:
@lisp
-("~/News/agent.SCORE" "~/News/agent.group.SCORE")
+(setq message-send-news-function 'nnsoup-request-post)
+(setq message-send-mail-function 'nnsoup-request-mail)
@end lisp
-@item
-Group Parameter specification
-
-@lisp
-(agent-score "~/News/agent.SCORE")
-@end lisp
+And that's it, really. If you only want news to go into the @sc{soup}
+system you just use the first line. If you only want mail to be
+@sc{soup}ed you use the second.
-Additional score files can be specified as above. Need I say anything
-about parenthesis.
-@end itemize
-@item
-Use @code{normal} score files
+@node Mail-To-News Gateways
+@subsection Mail-To-News Gateways
+@cindex mail-to-news gateways
+@cindex gateways
-If you dont want to maintain two sets of scoring rules for a group, and
-your desired @code{downloading} criteria for a group are the same as your
-@code{reading} criteria then you can tell the agent to refer to your
-@code{normal} score files when deciding what to download.
+If your local @code{nntp} server doesn't allow posting, for some reason
+or other, you can post using one of the numerous mail-to-news gateways.
+The @code{nngateway} back end provides the interface.
-These directives in either the category definition or a group's
-parameters will cause the agent to read in all the applicable score
-files for a group, *filtering out* those those sections that do not
-relate to one of the permitted subset of scoring keywords.
+Note that you can't read anything from this back end---it can only be
+used to post with.
-@itemize @bullet
-@item
-Category Specification
+Server variables:
-@lisp
-file
-@end lisp
+@table @code
+@item nngateway-address
+@vindex nngateway-address
+This is the address of the mail-to-news gateway.
-@item
-Group Parameter specification
+@item nngateway-header-transformation
+@vindex nngateway-header-transformation
+News headers often have to be transformed in some odd way or other
+for the mail-to-news gateway to accept it. This variable says what
+transformation should be called, and defaults to
+@code{nngateway-simple-header-transformation}. The function is called
+narrowed to the headers to be transformed and with one parameter---the
+gateway address.
-@lisp
-(agent-score . file)
-@end lisp
-@end itemize
-@end enumerate
+This default function just inserts a new @code{To} header based on the
+@code{Newsgroups} header and the gateway address.
+For instance, an article with this @code{Newsgroups} header:
-@node The Category Buffer
-@subsubsection The Category Buffer
+@example
+Newsgroups: alt.religion.emacs
+@end example
-You'd normally do all category maintenance from the category buffer.
-When you enter it for the first time (with the @kbd{J c} command from
-the group buffer), you'll only see the @code{default} category.
+will get this @code{To} header inserted:
-The following commands are available in this buffer:
+@example
+To: alt-religion-emacs@@GATEWAY
+@end example
-@table @kbd
-@item q
-@kindex q (Category)
-@findex gnus-category-exit
-Return to the group buffer (@code{gnus-category-exit}).
+The following pre-defined functions exist:
-@item k
-@kindex k (Category)
-@findex gnus-category-kill
-Kill the current category (@code{gnus-category-kill}).
+@findex nngateway-simple-header-transformation
+@table @code
-@item c
-@kindex c (Category)
-@findex gnus-category-copy
-Copy the current category (@code{gnus-category-copy}).
+@item nngateway-simple-header-transformation
+Creates a @code{To} header that looks like
+@var{newsgroup}@@@code{nngateway-address}.
-@item a
-@kindex a (Category)
-@findex gnus-category-add
-Add a new category (@code{gnus-category-add}).
+@findex nngateway-mail2news-header-transformation
-@item p
-@kindex p (Category)
-@findex gnus-category-edit-predicate
-Edit the predicate of the current category
-(@code{gnus-category-edit-predicate}).
+@item nngateway-mail2news-header-transformation
+Creates a @code{To} header that looks like
+@code{nngateway-address}.
-@item g
-@kindex g (Category)
-@findex gnus-category-edit-groups
-Edit the list of groups belonging to the current category
-(@code{gnus-category-edit-groups}).
+Here's an example:
-@item s
-@kindex s (Category)
-@findex gnus-category-edit-score
-Edit the download score rule of the current category
-(@code{gnus-category-edit-score}).
+@lisp
+(setq gnus-post-method
+ '(nngateway
+ "mail2news@@replay.com"
+ (nngateway-header-transformation
+ nngateway-mail2news-header-transformation)))
+@end lisp
-@item l
-@kindex l (Category)
-@findex gnus-category-list
-List all the categories (@code{gnus-category-list}).
@end table
-@node Category Variables
-@subsubsection Category Variables
+@end table
-@table @code
-@item gnus-category-mode-hook
-@vindex gnus-category-mode-hook
-Hook run in category buffers.
+So, to use this, simply say something like:
-@item gnus-category-line-format
-@vindex gnus-category-line-format
-Format of the lines in the category buffer (@pxref{Formatting
-Variables}). Valid elements are:
+@lisp
+(setq gnus-post-method '(nngateway "GATEWAY.ADDRESS"))
+@end lisp
-@table @samp
-@item c
-The name of the category.
-@item g
-The number of groups in the category.
-@end table
-@item gnus-category-mode-line-format
-@vindex gnus-category-mode-line-format
-Format of the category mode line (@pxref{Mode Line Formatting}).
+@node Combined Groups
+@section Combined Groups
-@item gnus-agent-short-article
-@vindex gnus-agent-short-article
-Articles that have fewer lines than this are short. Default 100.
+Gnus allows combining a mixture of all the other group types into bigger
+groups.
-@item gnus-agent-long-article
-@vindex gnus-agent-long-article
-Articles that have more lines than this are long. Default 200.
+@menu
+* Virtual Groups:: Combining articles from many groups.
+* Kibozed Groups:: Looking through parts of the newsfeed for articles.
+@end menu
-@item gnus-agent-low-score
-@vindex gnus-agent-low-score
-Articles that have a score lower than this have a low score. Default
-0.
-@item gnus-agent-high-score
-@vindex gnus-agent-high-score
-Articles that have a score higher than this have a high score. Default
-0.
+@node Virtual Groups
+@subsection Virtual Groups
+@cindex nnvirtual
+@cindex virtual groups
+@cindex merging groups
-@end table
+An @dfn{nnvirtual group} is really nothing more than a collection of
+other groups.
+For instance, if you are tired of reading many small groups, you can
+put them all in one big group, and then grow tired of reading one
+big, unwieldy group. The joys of computing!
-@node Agent Commands
-@subsection Agent Commands
+You specify @code{nnvirtual} as the method. The address should be a
+regexp to match component groups.
-All the Gnus Agent commands are on the @kbd{J} submap. The @kbd{J j}
-(@code{gnus-agent-toggle-plugged} command works in all modes, and
-toggles the plugged/unplugged state of the Gnus Agent.
+All marks in the virtual group will stick to the articles in the
+component groups. So if you tick an article in a virtual group, the
+article will also be ticked in the component group from whence it
+came. (And vice versa---marks from the component groups will also be
+shown in the virtual group.). To create an empty virtual group, run
+@kbd{G V} (@code{gnus-group-make-empty-virtual}) in the group buffer
+and edit the method regexp with @kbd{M-e}
+(@code{gnus-group-edit-group-method})
+Here's an example @code{nnvirtual} method that collects all Andrea Dworkin
+newsgroups into one, big, happy newsgroup:
-@menu
-* Group Agent Commands::
-* Summary Agent Commands::
-* Server Agent Commands::
-@end menu
+@lisp
+(nnvirtual "^alt\\.fan\\.andrea-dworkin$\\|^rec\\.dworkin.*")
+@end lisp
-You can run a complete batch fetch from the command line with the
-following incantation:
+The component groups can be native or foreign; everything should work
+smoothly, but if your computer explodes, it was probably my fault.
+
+Collecting the same group from several servers might actually be a good
+idea if users have set the Distribution header to limit distribution.
+If you would like to read @samp{soc.motss} both from a server in Japan
+and a server in Norway, you could use the following as the group regexp:
-@cindex gnus-agent-batch-fetch
@example
-$ emacs -batch -l ~/.gnus.el -f gnus-agent-batch-fetch
+"^nntp\\+server\\.jp:soc\\.motss$\\|^nntp\\+server\\.no:soc\\.motss$"
@end example
+(Remember, though, that if you're creating the group with @kbd{G m}, you
+shouldn't double the backslashes, and you should leave off the quote
+characters at the beginning and the end of the string.)
+This should work kinda smoothly---all articles from both groups should
+end up in this one, and there should be no duplicates. Threading (and
+the rest) will still work as usual, but there might be problems with the
+sequence of articles. Sorting on date might be an option here
+(@pxref{Selecting a Group}).
-@node Group Agent Commands
-@subsubsection Group Agent Commands
+One limitation, however---all groups included in a virtual
+group have to be alive (i.e., subscribed or unsubscribed). Killed or
+zombie groups can't be component groups for @code{nnvirtual} groups.
-@table @kbd
-@item J u
-@kindex J u (Agent Group)
-@findex gnus-agent-fetch-groups
-Fetch all eligible articles in the current group
-(@code{gnus-agent-fetch-groups}).
+@vindex nnvirtual-always-rescan
+If the @code{nnvirtual-always-rescan} is non-@code{nil},
+@code{nnvirtual} will always scan groups for unread articles when
+entering a virtual group. If this variable is @code{nil} (which is the
+default) and you read articles in a component group after the virtual
+group has been activated, the read articles from the component group
+will show up when you enter the virtual group. You'll also see this
+effect if you have two virtual groups that have a component group in
+common. If that's the case, you should set this variable to @code{t}.
+Or you can just tap @code{M-g} on the virtual group every time before
+you enter it---it'll have much the same effect.
-@item J c
-@kindex J c (Agent Group)
-@findex gnus-enter-category-buffer
-Enter the Agent category buffer (@code{gnus-enter-category-buffer}).
+@code{nnvirtual} can have both mail and news groups as component groups.
+When responding to articles in @code{nnvirtual} groups, @code{nnvirtual}
+has to ask the back end of the component group the article comes from
+whether it is a news or mail back end. However, when you do a @kbd{^},
+there is typically no sure way for the component back end to know this,
+and in that case @code{nnvirtual} tells Gnus that the article came from a
+not-news back end. (Just to be on the safe side.)
-@item J s
-@kindex J s (Agent Group)
-@findex gnus-agent-fetch-session
-Fetch all eligible articles in all groups
-(@code{gnus-agent-fetch-session}).
+@kbd{C-c C-n} in the message buffer will insert the @code{Newsgroups}
+line from the article you respond to in these cases.
-@item J S
-@kindex J S (Agent Group)
-@findex gnus-group-send-drafts
-Send all sendable messages in the draft group
-(@code{gnus-agent-fetch-session}). @xref{Drafts}.
+@code{nnvirtual} groups do not inherit anything but articles and marks
+from component groups---group parameters, for instance, are not
+inherited.
-@item J a
-@kindex J a (Agent Group)
-@findex gnus-agent-add-group
-Add the current group to an Agent category
-(@code{gnus-agent-add-group}). This command understands the
-process/prefix convention (@pxref{Process/Prefix}).
-@item J r
-@kindex J r (Agent Group)
-@findex gnus-agent-remove-group
-Remove the current group from its category, if any
-(@code{gnus-agent-remove-group}). This command understands the
-process/prefix convention (@pxref{Process/Prefix}).
+@node Kibozed Groups
+@subsection Kibozed Groups
+@cindex nnkiboze
+@cindex kibozing
-@end table
+@dfn{Kibozing} is defined by @sc{oed} as ``grepping through (parts of)
+the news feed''. @code{nnkiboze} is a back end that will do this for
+you. Oh joy! Now you can grind any @sc{nntp} server down to a halt
+with useless requests! Oh happiness!
+@kindex G k (Group)
+To create a kibozed group, use the @kbd{G k} command in the group
+buffer.
-@node Summary Agent Commands
-@subsubsection Summary Agent Commands
+The address field of the @code{nnkiboze} method is, as with
+@code{nnvirtual}, a regexp to match groups to be ``included'' in the
+@code{nnkiboze} group. That's where most similarities between @code{nnkiboze}
+and @code{nnvirtual} end.
-@table @kbd
-@item J #
-@kindex J # (Agent Summary)
-@findex gnus-agent-mark-article
-Mark the article for downloading (@code{gnus-agent-mark-article}).
+In addition to this regexp detailing component groups, an @code{nnkiboze} group
+must have a score file to say what articles are to be included in
+the group (@pxref{Scoring}).
-@item J M-#
-@kindex J M-# (Agent Summary)
-@findex gnus-agent-unmark-article
-Remove the downloading mark from the article
-(@code{gnus-agent-unmark-article}).
+@kindex M-x nnkiboze-generate-groups
+@findex nnkiboze-generate-groups
+You must run @kbd{M-x nnkiboze-generate-groups} after creating the
+@code{nnkiboze} groups you want to have. This command will take time. Lots of
+time. Oodles and oodles of time. Gnus has to fetch the headers from
+all the articles in all the component groups and run them through the
+scoring process to determine if there are any articles in the groups
+that are to be part of the @code{nnkiboze} groups.
-@item @@
-@kindex @@ (Agent Summary)
-@findex gnus-agent-toggle-mark
-Toggle whether to download the article (@code{gnus-agent-toggle-mark}).
+Please limit the number of component groups by using restrictive
+regexps. Otherwise your sysadmin may become annoyed with you, and the
+@sc{nntp} site may throw you off and never let you back in again.
+Stranger things have happened.
-@item J c
-@kindex J c (Agent Summary)
-@findex gnus-agent-catchup
-Mark all undownloaded articles as read (@code{gnus-agent-catchup}).
+@code{nnkiboze} component groups do not have to be alive---they can be dead,
+and they can be foreign. No restrictions.
-@end table
+@vindex nnkiboze-directory
+The generation of an @code{nnkiboze} group means writing two files in
+@code{nnkiboze-directory}, which is @file{~/News/} by default. One
+contains the @sc{nov} header lines for all the articles in the group,
+and the other is an additional @file{.newsrc} file to store information
+on what groups have been searched through to find component articles.
+Articles marked as read in the @code{nnkiboze} group will have
+their @sc{nov} lines removed from the @sc{nov} file.
-@node Server Agent Commands
-@subsubsection Server Agent Commands
-@table @kbd
-@item J a
-@kindex J a (Agent Server)
-@findex gnus-agent-add-server
-Add the current server to the list of servers covered by the Gnus Agent
-(@code{gnus-agent-add-server}).
+@node Gnus Unplugged
+@section Gnus Unplugged
+@cindex offline
+@cindex unplugged
+@cindex Agent
+@cindex Gnus Agent
+@cindex Gnus Unplugged
-@item J r
-@kindex J r (Agent Server)
-@findex gnus-agent-remove-server
-Remove the current server from the list of servers covered by the Gnus
-Agent (@code{gnus-agent-remove-server}).
+In olden times (ca. February '88), people used to run their newsreaders
+on big machines with permanent connections to the net. News transport
+was dealt with by news servers, and all the newsreaders had to do was to
+read news. Believe it or not.
-@end table
+Nowadays most people read news and mail at home, and use some sort of
+modem to connect to the net. To avoid running up huge phone bills, it
+would be nice to have a way to slurp down all the news and mail, hang up
+the phone, read for several hours, and then upload any responses you
+have to make. And then you repeat the procedure.
+Of course, you can use news servers for doing this as well. I've used
+@code{inn} together with @code{slurp}, @code{pop} and @code{sendmail}
+for some years, but doing that's a bore. Moving the news server
+functionality up to the newsreader makes sense if you're the only person
+reading news on a machine.
-@node Agent Expiry
-@subsection Agent Expiry
+Setting up Gnus as an ``offline'' newsreader is quite simple. In
+fact, you don't even have to configure anything.
-@vindex gnus-agent-expire-days
-@findex gnus-agent-expire
-@kindex M-x gnus-agent-expire
-@cindex Agent expiry
-@cindex Gnus Agent expiry
-@cindex expiry
+Of course, to use it as such, you have to learn a few new commands.
-@code{nnagent} doesn't handle expiry. Instead, there's a special
-@code{gnus-agent-expire} command that will expire all read articles that
-are older than @code{gnus-agent-expire-days} days. It can be run
-whenever you feel that you're running out of space. It's not
-particularly fast or efficient, and it's not a particularly good idea to
-interrupt it (with @kbd{C-g} or anything else) once you've started it.
+@menu
+* Agent Basics:: How it all is supposed to work.
+* Agent Categories:: How to tell the Gnus Agent what to download.
+* Agent Commands:: New commands for all the buffers.
+* Agent as Cache:: The Agent is a big cache too.
+* Agent Expiry:: How to make old articles go away.
+* Agent and IMAP:: How to use the Agent with IMAP.
+* Outgoing Messages:: What happens when you post/mail something?
+* Agent Variables:: Customizing is fun.
+* Example Setup:: An example @file{.gnus.el} file for offline people.
+* Batching Agents:: How to fetch news from a @code{cron} job.
+* Agent Caveats:: What you think it'll do and what it does.
+@end menu
-@vindex gnus-agent-expire-all
-if @code{gnus-agent-expire-all} is non-@code{nil}, this command will
-expire all articles---unread, read, ticked and dormant. If @code{nil}
-(which is the default), only read articles are eligible for expiry, and
-unread, ticked and dormant articles will be kept indefinitely.
+@node Agent Basics
+@subsection Agent Basics
-@node Outgoing Messages
-@subsection Outgoing Messages
+First, let's get some terminology out of the way.
-When Gnus is unplugged, all outgoing messages (both mail and news) are
-stored in the draft groups (@pxref{Drafts}). You can view them there
-after posting, and edit them at will.
+The Gnus Agent is said to be @dfn{unplugged} when you have severed the
+connection to the net (and notified the Agent that this is the case).
+When the connection to the net is up again (and Gnus knows this), the
+Agent is @dfn{plugged}.
-When Gnus is plugged again, you can send the messages either from the
-draft group with the special commands available there, or you can use
-the @kbd{J S} command in the group buffer to send all the sendable
-messages in the draft group.
+The @dfn{local} machine is the one you're running on, and which isn't
+connected to the net continuously.
+@dfn{Downloading} means fetching things from the net to your local
+machine. @dfn{Uploading} is doing the opposite.
+Let's take a typical Gnus session using the Agent.
-@node Agent Variables
-@subsection Agent Variables
+@itemize @bullet
-@table @code
-@item gnus-agent-directory
-@vindex gnus-agent-directory
-Where the Gnus Agent will store its files. The default is
-@file{~/News/agent/}.
+@item
+You start Gnus with @code{gnus-unplugged}. This brings up the Gnus
+Agent in a disconnected state. You can read all the news that you have
+already fetched while in this mode.
-@item gnus-agent-handle-level
-@vindex gnus-agent-handle-level
-Groups on levels (@pxref{Group Levels}) higher than this variable will
-be ignored by the Agent. The default is @code{gnus-level-subscribed},
-which means that only subscribed group will be considered by the Agent
-by default.
+@item
+You then decide to see whether any new news has arrived. You connect
+your machine to the net (using PPP or whatever), and then hit @kbd{J j}
+to make Gnus become @dfn{plugged} and use @kbd{g} to check for new mail
+as usual. To check for new mail in unplugged mode, see (@pxref{Mail
+Source Specifiers}).
-@item gnus-agent-plugged-hook
-@vindex gnus-agent-plugged-hook
-Hook run when connecting to the network.
+@item
+You can then read the new news immediately, or you can download the news
+onto your local machine. If you want to do the latter, you press @kbd{g}
+to check if there are any new news and then @kbd{J
+s} to fetch all the eligible articles in all the groups. (To let Gnus
+know which articles you want to download, @pxref{Agent Categories}.)
-@item gnus-agent-unplugged-hook
-@vindex gnus-agent-unplugged-hook
-Hook run when disconnecting from the network.
+@item
+After fetching the articles, you press @kbd{J j} to make Gnus become
+unplugged again, and you shut down the PPP thing (or whatever). And
+then you read the news offline.
-@end table
+@item
+And then you go to step 2.
+@end itemize
+Here are some things you should do the first time (or so) that you use
+the Agent.
-@node Example Setup
-@subsection Example Setup
+@itemize @bullet
-If you don't want to read this manual, and you have a fairly standard
-setup, you may be able to use something like the following as your
-@file{.gnus.el} file to get started.
+@item
+Decide which servers should be covered by the Agent. If you have a mail
+back end, it would probably be nonsensical to have it covered by the
+Agent. Go to the server buffer (@kbd{^} in the group buffer) and press
+@kbd{J a} on the server (or servers) that you wish to have covered by the
+Agent (@pxref{Server Agent Commands}), or @kbd{J r} on automatically
+added servers you do not wish to have covered by the Agent. By default,
+all @code{nntp} and @code{nnimap} groups in @code{gnus-select-method} and
+@code{gnus-secondary-select-methods} are agentized.
-@lisp
-;;; Define how Gnus is to fetch news. We do this over NNTP
-;;; from your ISP's server.
-(setq gnus-select-method '(nntp "news.your-isp.com"))
+@item
+Decide on download policy. @xref{Agent Categories}.
-;;; Define how Gnus is to read your mail. We read mail from
-;;; your ISP's POP server.
-(setq mail-sources '((pop :server "pop.your-isp.com")))
+@item
+Uhm... that's it.
+@end itemize
-;;; Say how Gnus is to store the mail. We use nnml groups.
-(setq gnus-secondary-select-methods '((nnml "")))
-;;; Make Gnus into an offline newsreader.
-(gnus-agentize)
-@end lisp
+@node Agent Categories
+@subsection Agent Categories
-That should be it, basically. Put that in your @file{~/.gnus.el} file,
-edit to suit your needs, start up PPP (or whatever), and type @kbd{M-x
-gnus}.
+One of the main reasons to integrate the news transport layer into the
+newsreader is to allow greater control over what articles to download.
+There's not much point in downloading huge amounts of articles, just to
+find out that you're not interested in reading any of them. It's better
+to be somewhat more conservative in choosing what to download, and then
+mark the articles for downloading manually if it should turn out that
+you're interested in the articles anyway.
-If this is the first time you've run Gnus, you will be subscribed
-automatically to a few default newsgroups. You'll probably want to
-subscribe to more groups, and to do that, you have to query the
-@sc{nntp} server for a complete list of groups with the @kbd{A A}
-command. This usually takes quite a while, but you only have to do it
-once.
+The main way to control what is to be downloaded is to create a
+@dfn{category} and then assign some (or all) groups to this category.
+Groups that do not belong in any other category belong to the
+@code{default} category. Gnus has its own buffer for creating and
+managing categories.
-After reading and parsing a while, you'll be presented with a list of
-groups. Subscribe to the ones you want to read with the @kbd{u}
-command. @kbd{l} to make all the killed groups disappear after you've
-subscribe to all the groups you want to read. (@kbd{A k} will bring
-back all the killed groups.)
+@menu
+* Category Syntax:: What a category looks like.
+* Category Buffer:: A buffer for maintaining categories.
+* Category Variables:: Customize'r'Us.
+@end menu
-You can now read the groups at once, or you can download the articles
-with the @kbd{J s} command. And then read the rest of this manual to
-find out which of the other gazillion things you want to customize.
+@node Category Syntax
+@subsubsection Category Syntax
-@node Batching Agents
-@subsection Batching Agents
+A category consists of two things.
-Having the Gnus Agent fetch articles (and post whatever messages you've
-written) is quite easy once you've gotten things set up properly. The
-following shell script will do everything that is necessary:
+@enumerate
+@item
+A predicate which (generally) gives a rough outline of which articles
+are eligible for downloading; and
-@example
-#!/bin/sh
-emacs -batch -l ~/.emacs -f gnus-agent-batch >/dev/null
-@end example
+@item
+a score rule which (generally) gives you a finer granularity when
+deciding what articles to download. (Note that this @dfn{download
+score} is not necessarily related to normal scores.)
+@end enumerate
+A predicate in its simplest form can be a single predicate such as
+@code{true} or @code{false}. These two will download every available
+article or nothing respectively. In the case of these two special
+predicates an additional score rule is superfluous.
-@node Agent Caveats
-@subsection Agent Caveats
+Predicates of @code{high} or @code{low} download articles in respect of
+their scores in relationship to @code{gnus-agent-high-score} and
+@code{gnus-agent-low-score} as described below.
-The Gnus Agent doesn't seem to work like most other offline
-newsreaders. Here are some common questions that some imaginary people
-may ask:
+To gain even finer control of what is to be regarded eligible for
+download a predicate can consist of a number of predicates with logical
+operators sprinkled in between.
-@table @dfn
-@item If I read an article while plugged, do they get entered into the
-Agent?
+Perhaps some examples are in order.
-@strong{No.}
+Here's a simple predicate. (It's the default predicate, in fact, used
+for all groups that don't belong to any other category.)
-@item If I read an article while plugged, and the article already exists
-in the Agent, will it get downloaded once more?
+@lisp
+short
+@end lisp
-@strong{Yes.}
+Quite simple, eh? This predicate is true if and only if the article is
+short (for some value of ``short'').
-@end table
+Here's a more complex predicate:
-In short, when Gnus is unplugged, it only looks into the locally stored
-articles; when it's plugged, it only talks to your ISP.
+@lisp
+(or high
+ (and
+ (not low)
+ (not long)))
+@end lisp
+This means that an article should be downloaded if it has a high score,
+or if the score is not low and the article is not long. You get the
+drift.
-@node Scoring
-@chapter Scoring
-@cindex scoring
+The available logical operators are @code{or}, @code{and} and
+@code{not}. (If you prefer, you can use the more ``C''-ish operators
+@samp{|}, @code{&} and @code{!} instead.)
-Other people use @dfn{kill files}, but we here at Gnus Towers like
-scoring better than killing, so we'd rather switch than fight. They do
-something completely different as well, so sit up straight and pay
-attention!
+The following predicates are pre-defined, but if none of these fit what
+you want to do, you can write your own.
-@vindex gnus-summary-mark-below
-All articles have a default score (@code{gnus-summary-default-score}),
-which is 0 by default. This score may be raised or lowered either
-interactively or by score files. Articles that have a score lower than
-@code{gnus-summary-mark-below} are marked as read.
+@table @code
+@item short
+True iff the article is shorter than @code{gnus-agent-short-article}
+lines; default 100.
-Gnus will read any @dfn{score files} that apply to the current group
-before generating the summary buffer.
+@item long
+True iff the article is longer than @code{gnus-agent-long-article}
+lines; default 200.
-There are several commands in the summary buffer that insert score
-entries based on the current article. You can, for instance, ask Gnus to
-lower or increase the score of all articles with a certain subject.
+@item low
+True iff the article has a download score less than
+@code{gnus-agent-low-score}; default 0.
-There are two sorts of scoring entries: Permanent and temporary.
-Temporary score entries are self-expiring entries. Any entries that are
-temporary and have not been used for, say, a week, will be removed
-silently to help keep the sizes of the score files down.
+@item high
+True iff the article has a download score greater than
+@code{gnus-agent-high-score}; default 0.
-@menu
-* Summary Score Commands:: Adding score entries for the current group.
-* Group Score Commands:: General score commands.
-* Score Variables:: Customize your scoring. (My, what terminology).
-* Score File Format:: What a score file may contain.
-* Score File Editing:: You can edit score files by hand as well.
-* Adaptive Scoring:: Big Sister Gnus knows what you read.
-* Home Score File:: How to say where new score entries are to go.
-* Followups To Yourself:: Having Gnus notice when people answer you.
-* Scoring Tips:: How to score effectively.
-* Reverse Scoring:: That problem child of old is not problem.
-* Global Score Files:: Earth-spanning, ear-splitting score files.
-* Kill Files:: They are still here, but they can be ignored.
-* Converting Kill Files:: Translating kill files to score files.
-* GroupLens:: Getting predictions on what you like to read.
-* Advanced Scoring:: Using logical expressions to build score rules.
-* Score Decays:: It can be useful to let scores wither away.
-@end menu
+@item spam
+True iff the Gnus Agent guesses that the article is spam. The
+heuristics may change over time, but at present it just computes a
+checksum and sees whether articles match.
+@item true
+Always true.
-@node Summary Score Commands
-@section Summary Score Commands
-@cindex score commands
+@item false
+Always false.
+@end table
-The score commands that alter score entries do not actually modify real
-score files. That would be too inefficient. Gnus maintains a cache of
-previously loaded score files, one of which is considered the
-@dfn{current score file alist}. The score commands simply insert
-entries into this list, and upon group exit, this list is saved.
+If you want to create your own predicate function, here's what you have
+to know: The functions are called with no parameters, but the
+@code{gnus-headers} and @code{gnus-score} dynamic variables are bound to
+useful values.
-The current score file is by default the group's local score file, even
-if no such score file actually exists. To insert score commands into
-some other score file (e.g. @file{all.SCORE}), you must first make this
-score file the current one.
+For example, you could decide that you don't want to download articles
+that were posted more than a certain number of days ago (e.g. posted
+more than @code{gnus-agent-expire-days} ago) you might write a function
+something along the lines of the following:
-General score commands that don't actually change the score file:
+@lisp
+(defun my-article-old-p ()
+ "Say whether an article is old."
+ (< (time-to-days (date-to-time (mail-header-date gnus-headers)))
+ (- (time-to-days (current-time)) gnus-agent-expire-days)))
+@end lisp
-@table @kbd
+with the predicate then defined as:
-@item V s
-@kindex V s (Summary)
-@findex gnus-summary-set-score
-Set the score of the current article (@code{gnus-summary-set-score}).
+@lisp
+(not my-article-old-p)
+@end lisp
-@item V S
-@kindex V S (Summary)
-@findex gnus-summary-current-score
-Display the score of the current article
-(@code{gnus-summary-current-score}).
+or you could append your predicate to the predefined
+@code{gnus-category-predicate-alist} in your @file{~/.gnus.el} or
+wherever.
-@item V t
-@kindex V t (Summary)
-@findex gnus-score-find-trace
-Display all score rules that have been used on the current article
-(@code{gnus-score-find-trace}).
+@lisp
+(require 'gnus-agent)
+(setq gnus-category-predicate-alist
+ (append gnus-category-predicate-alist
+ '((old . my-article-old-p))))
+@end lisp
-@item V R
-@kindex V R (Summary)
-@findex gnus-summary-rescore
-Run the current summary through the scoring process
-(@code{gnus-summary-rescore}). This might be useful if you're playing
-around with your score files behind Gnus' back and want to see the
-effect you're having.
+and simply specify your predicate as:
-@item V c
-@kindex V c (Summary)
-@findex gnus-score-change-score-file
-Make a different score file the current
-(@code{gnus-score-change-score-file}).
+@lisp
+(not old)
+@end lisp
-@item V e
-@kindex V e (Summary)
-@findex gnus-score-edit-current-scores
-Edit the current score file (@code{gnus-score-edit-current-scores}).
-You will be popped into a @code{gnus-score-mode} buffer (@pxref{Score
-File Editing}).
+If/when using something like the above, be aware that there are many
+misconfigured systems/mailers out there and so an article's date is not
+always a reliable indication of when it was posted. Hell, some people
+just don't give a damn.
-@item V f
-@kindex V f (Summary)
-@findex gnus-score-edit-file
-Edit a score file and make this score file the current one
-(@code{gnus-score-edit-file}).
+The above predicates apply to *all* the groups which belong to the
+category. However, if you wish to have a specific predicate for an
+individual group within a category, or you're just too lazy to set up a
+new category, you can enter a group's individual predicate in it's group
+parameters like so:
-@item V F
-@kindex V F (Summary)
-@findex gnus-score-flush-cache
-Flush the score cache (@code{gnus-score-flush-cache}). This is useful
-after editing score files.
+@lisp
+(agent-predicate . short)
+@end lisp
-@item V C
-@kindex V C (Summary)
-@findex gnus-score-customize
-Customize a score file in a visually pleasing manner
-(@code{gnus-score-customize}).
+This is the group parameter equivalent of the agent category default.
+Note that when specifying a single word predicate like this, the
+@code{agent-predicate} specification must be in dotted pair notation.
-@end table
+The equivalent of the longer example from above would be:
-The rest of these commands modify the local score file.
+@lisp
+(agent-predicate or high (and (not low) (not long)))
+@end lisp
-@table @kbd
+The outer parenthesis required in the category specification are not
+entered here as, not being in dotted pair notation, the value of the
+predicate is assumed to be a list.
-@item V m
-@kindex V m (Summary)
-@findex gnus-score-set-mark-below
-Prompt for a score, and mark all articles with a score below this as
-read (@code{gnus-score-set-mark-below}).
-@item V x
-@kindex V x (Summary)
-@findex gnus-score-set-expunge-below
-Prompt for a score, and add a score rule to the current score file to
-expunge all articles below this score
-(@code{gnus-score-set-expunge-below}).
-@end table
+Now, the syntax of the download score is the same as the syntax of
+normal score files, except that all elements that require actually
+seeing the article itself are verboten. This means that only the
+following headers can be scored on: @code{Subject}, @code{From},
+@code{Date}, @code{Message-ID}, @code{References}, @code{Chars},
+@code{Lines}, and @code{Xref}.
-The keystrokes for actually making score entries follow a very regular
-pattern, so there's no need to list all the commands. (Hundreds of
-them.)
+As with predicates, the specification of the @code{download score rule}
+to use in respect of a group can be in either the category definition if
+it's to be applicable to all groups in therein, or a group's parameters
+if it's to be specific to that group.
-@findex gnus-summary-increase-score
-@findex gnus-summary-lower-score
+In both of these places the @code{download score rule} can take one of
+three forms:
@enumerate
@item
-The first key is either @kbd{I} (upper case i) for increasing the score
-or @kbd{L} for lowering the score.
-@item
-The second key says what header you want to score on. The following
-keys are available:
-@table @kbd
+Score rule
-@item a
-Score on the author name.
+This has the same syntax as a normal gnus score file except only a
+subset of scoring keywords are available as mentioned above.
-@item s
-Score on the subject line.
+example:
-@item x
-Score on the @code{Xref} line---i.e., the cross-posting line.
+@itemize @bullet
+@item
+Category specification
-@item r
-Score on the @code{References} line.
+@lisp
+(("from"
+ ("Lars Ingebrigtsen" 1000000 nil s))
+("lines"
+ (500 -100 nil <)))
+@end lisp
-@item d
-Score on the date.
+@item
+Group Parameter specification
-@item l
-Score on the number of lines.
+@lisp
+(agent-score ("from"
+ ("Lars Ingebrigtsen" 1000000 nil s))
+ ("lines"
+ (500 -100 nil <)))
+@end lisp
-@item i
-Score on the @code{Message-ID} header.
+Again, note the omission of the outermost parenthesis here.
+@end itemize
-@item f
-Score on followups---this matches the author name, and adds scores to
-the followups to this author.
+@item
+Agent score file
-@item b
-Score on the body.
+These score files must *only* contain the permitted scoring keywords
+stated above.
-@item h
-Score on the head.
+example:
-@item t
-Score on thread.
+@itemize @bullet
+@item
+Category specification
-@end table
+@lisp
+("~/News/agent.SCORE")
+@end lisp
+
+or perhaps
+
+@lisp
+("~/News/agent.SCORE" "~/News/agent.group.SCORE")
+@end lisp
@item
-The third key is the match type. Which match types are valid depends on
-what headers you are scoring on.
+Group Parameter specification
-@table @code
+@lisp
+(agent-score "~/News/agent.SCORE")
+@end lisp
-@item strings
+Additional score files can be specified as above. Need I say anything
+about parenthesis?
+@end itemize
-@table @kbd
+@item
+Use @code{normal} score files
-@item e
-Exact matching.
+If you don't want to maintain two sets of scoring rules for a group, and
+your desired @code{downloading} criteria for a group are the same as your
+@code{reading} criteria then you can tell the agent to refer to your
+@code{normal} score files when deciding what to download.
-@item s
-Substring matching.
+These directives in either the category definition or a group's
+parameters will cause the agent to read in all the applicable score
+files for a group, *filtering out* those sections that do not
+relate to one of the permitted subset of scoring keywords.
-@item f
-Fuzzy matching (@pxref{Fuzzy Matching}).
+@itemize @bullet
+@item
+Category Specification
-@item r
-Regexp matching
-@end table
+@lisp
+file
+@end lisp
-@item date
-@table @kbd
+@item
+Group Parameter specification
-@item b
-Before date.
+@lisp
+(agent-score . file)
+@end lisp
+@end itemize
+@end enumerate
-@item a
-After date.
+@node Category Buffer
+@subsubsection Category Buffer
-@item n
-This date.
-@end table
+You'd normally do all category maintenance from the category buffer.
+When you enter it for the first time (with the @kbd{J c} command from
+the group buffer), you'll only see the @code{default} category.
+
+The following commands are available in this buffer:
-@item number
@table @kbd
+@item q
+@kindex q (Category)
+@findex gnus-category-exit
+Return to the group buffer (@code{gnus-category-exit}).
-@item <
-Less than number.
+@item k
+@kindex k (Category)
+@findex gnus-category-kill
+Kill the current category (@code{gnus-category-kill}).
-@item =
-Equal to number.
+@item c
+@kindex c (Category)
+@findex gnus-category-copy
+Copy the current category (@code{gnus-category-copy}).
-@item >
-Greater than number.
-@end table
-@end table
+@item a
+@kindex a (Category)
+@findex gnus-category-add
+Add a new category (@code{gnus-category-add}).
-@item
-The fourth and final key says whether this is a temporary (i.e., expiring)
-score entry, or a permanent (i.e., non-expiring) score entry, or whether
-it is to be done immediately, without adding to the score file.
-@table @kbd
+@item p
+@kindex p (Category)
+@findex gnus-category-edit-predicate
+Edit the predicate of the current category
+(@code{gnus-category-edit-predicate}).
-@item t
-Temporary score entry.
+@item g
+@kindex g (Category)
+@findex gnus-category-edit-groups
+Edit the list of groups belonging to the current category
+(@code{gnus-category-edit-groups}).
-@item p
-Permanent score entry.
+@item s
+@kindex s (Category)
+@findex gnus-category-edit-score
+Edit the download score rule of the current category
+(@code{gnus-category-edit-score}).
-@item i
-Immediately scoring.
+@item l
+@kindex l (Category)
+@findex gnus-category-list
+List all the categories (@code{gnus-category-list}).
@end table
-@end enumerate
-So, let's say you want to increase the score on the current author with
-exact matching permanently: @kbd{I a e p}. If you want to lower the
-score based on the subject line, using substring matching, and make a
-temporary score entry: @kbd{L s s t}. Pretty easy.
+@node Category Variables
+@subsubsection Category Variables
-To make things a bit more complicated, there are shortcuts. If you use
-a capital letter on either the second or third keys, Gnus will use
-defaults for the remaining one or two keystrokes. The defaults are
-``substring'' and ``temporary''. So @kbd{I A} is the same as @kbd{I a s
-t}, and @kbd{I a R} is the same as @kbd{I a r t}.
+@table @code
+@item gnus-category-mode-hook
+@vindex gnus-category-mode-hook
+Hook run in category buffers.
-These functions take both the numerical prefix and the symbolic prefix
-(@pxref{Symbolic Prefixes}). A numerical prefix says how much to lower
-(or increase) the score of the article. A symbolic prefix of @code{a}
-says to use the @file{all.SCORE} file for the command instead of the
-current score file.
+@item gnus-category-line-format
+@vindex gnus-category-line-format
+Format of the lines in the category buffer (@pxref{Formatting
+Variables}). Valid elements are:
-@vindex gnus-score-mimic-keymap
-The @code{gnus-score-mimic-keymap} says whether these commands will
-pretend they are keymaps or not.
+@table @samp
+@item c
+The name of the category.
+@item g
+The number of groups in the category.
+@end table
-@node Group Score Commands
-@section Group Score Commands
-@cindex group score commands
+@item gnus-category-mode-line-format
+@vindex gnus-category-mode-line-format
+Format of the category mode line (@pxref{Mode Line Formatting}).
-There aren't many of these as yet, I'm afraid.
+@item gnus-agent-short-article
+@vindex gnus-agent-short-article
+Articles that have fewer lines than this are short. Default 100.
-@table @kbd
+@item gnus-agent-long-article
+@vindex gnus-agent-long-article
+Articles that have more lines than this are long. Default 200.
-@item W f
-@kindex W f (Group)
-@findex gnus-score-flush-cache
-Gnus maintains a cache of score alists to avoid having to reload them
-all the time. This command will flush the cache
-(@code{gnus-score-flush-cache}).
+@item gnus-agent-low-score
+@vindex gnus-agent-low-score
+Articles that have a score lower than this have a low score. Default
+0.
+
+@item gnus-agent-high-score
+@vindex gnus-agent-high-score
+Articles that have a score higher than this have a high score. Default
+0.
@end table
-You can do scoring from the command line by saying something like:
-@findex gnus-batch-score
-@cindex batch scoring
-@example
-$ emacs -batch -l ~/.emacs -l ~/.gnus.el -f gnus-batch-score
-@end example
+@node Agent Commands
+@subsection Agent Commands
+All the Gnus Agent commands are on the @kbd{J} submap. The @kbd{J j}
+(@code{gnus-agent-toggle-plugged}) command works in all modes, and
+toggles the plugged/unplugged state of the Gnus Agent.
-@node Score Variables
-@section Score Variables
-@cindex score variables
-@table @code
+@menu
+* Group Agent Commands::
+* Summary Agent Commands::
+* Server Agent Commands::
+@end menu
-@item gnus-use-scoring
-@vindex gnus-use-scoring
-If @code{nil}, Gnus will not check for score files, and will not, in
-general, do any score-related work. This is @code{t} by default.
-@item gnus-kill-killed
-@vindex gnus-kill-killed
-If this variable is @code{nil}, Gnus will never apply score files to
-articles that have already been through the kill process. While this
-may save you lots of time, it also means that if you apply a kill file
-to a group, and then change the kill file and want to run it over you
-group again to kill more articles, it won't work. You have to set this
-variable to @code{t} to do that. (It is @code{t} by default.)
-@item gnus-kill-files-directory
-@vindex gnus-kill-files-directory
-All kill and score files will be stored in this directory, which is
-initialized from the @code{SAVEDIR} environment variable by default.
-This is @file{~/News/} by default.
-@item gnus-score-file-suffix
-@vindex gnus-score-file-suffix
-Suffix to add to the group name to arrive at the score file name
-(@samp{SCORE} by default.)
+@node Group Agent Commands
+@subsubsection Group Agent Commands
-@item gnus-score-uncacheable-files
-@vindex gnus-score-uncacheable-files
-@cindex score cache
-All score files are normally cached to avoid excessive re-loading of
-score files. However, if this might make you Emacs grow big and
-bloated, so this regexp can be used to weed out score files unlikely to be needed again. It would be a bad idea to deny caching of
-@file{all.SCORE}, while it might be a good idea to not cache
-@file{comp.infosystems.www.authoring.misc.ADAPT}. In fact, this
-variable is @samp{ADAPT$} by default, so no adaptive score files will
-be cached.
+@table @kbd
+@item J u
+@kindex J u (Agent Group)
+@findex gnus-agent-fetch-groups
+Fetch all eligible articles in the current group
+(@code{gnus-agent-fetch-groups}).
-@item gnus-save-score
-@vindex gnus-save-score
-If you have really complicated score files, and do lots of batch
-scoring, then you might set this variable to @code{t}. This will make
-Gnus save the scores into the @file{.newsrc.eld} file.
+@item J c
+@kindex J c (Agent Group)
+@findex gnus-enter-category-buffer
+Enter the Agent category buffer (@code{gnus-enter-category-buffer}).
-If you do not set this to @code{t}, then manual scores (like those set
-with @kbd{V s} (@code{gnus-summary-set-score})) will not be preserved
-across group visits.
+@item J s
+@kindex J s (Agent Group)
+@findex gnus-agent-fetch-session
+Fetch all eligible articles in all groups
+(@code{gnus-agent-fetch-session}).
-@item gnus-score-interactive-default-score
-@vindex gnus-score-interactive-default-score
-Score used by all the interactive raise/lower commands to raise/lower
-score with. Default is 1000, which may seem excessive, but this is to
-ensure that the adaptive scoring scheme gets enough room to play with.
-We don't want the small changes from the adaptive scoring to overwrite
-manually entered data.
+@item J S
+@kindex J S (Agent Group)
+@findex gnus-group-send-queue
+Send all sendable messages in the queue group
+(@code{gnus-group-send-queue}). @xref{Drafts}.
-@item gnus-summary-default-score
-@vindex gnus-summary-default-score
-Default score of an article, which is 0 by default.
+@item J a
+@kindex J a (Agent Group)
+@findex gnus-agent-add-group
+Add the current group to an Agent category
+(@code{gnus-agent-add-group}). This command understands the
+process/prefix convention (@pxref{Process/Prefix}).
-@item gnus-summary-expunge-below
-@vindex gnus-summary-expunge-below
-Don't display the summary lines of articles that have scores lower than
-this variable. This is @code{nil} by default, which means that no
-articles will be hidden. This variable is local to the summary buffers,
-and has to be set from @code{gnus-summary-mode-hook}.
+@item J r
+@kindex J r (Agent Group)
+@findex gnus-agent-remove-group
+Remove the current group from its category, if any
+(@code{gnus-agent-remove-group}). This command understands the
+process/prefix convention (@pxref{Process/Prefix}).
-@item gnus-score-over-mark
-@vindex gnus-score-over-mark
-Mark (in the third column) used for articles with a score over the
-default. Default is @samp{+}.
+@item J Y
+@kindex J Y (Agent Group)
+@findex gnus-agent-synchronize-flags
+Synchronize flags changed while unplugged with remote server, if any.
-@item gnus-score-below-mark
-@vindex gnus-score-below-mark
-Mark (in the third column) used for articles with a score below the
-default. Default is @samp{-}.
-@item gnus-score-find-score-files-function
-@vindex gnus-score-find-score-files-function
-Function used to find score files for the current group. This function
-is called with the name of the group as the argument.
+@end table
-Predefined functions available are:
-@table @code
-@item gnus-score-find-single
-@findex gnus-score-find-single
-Only apply the group's own score file.
+@node Summary Agent Commands
+@subsubsection Summary Agent Commands
-@item gnus-score-find-bnews
-@findex gnus-score-find-bnews
-Apply all score files that match, using bnews syntax. This is the
-default. If the current group is @samp{gnu.emacs.gnus}, for instance,
-@file{all.emacs.all.SCORE}, @file{not.alt.all.SCORE} and
-@file{gnu.all.SCORE} would all apply. In short, the instances of
-@samp{all} in the score file names are translated into @samp{.*}, and
-then a regexp match is done.
+@table @kbd
+@item J #
+@kindex J # (Agent Summary)
+@findex gnus-agent-mark-article
+Mark the article for downloading (@code{gnus-agent-mark-article}).
-This means that if you have some score entries that you want to apply to
-all groups, then you put those entries in the @file{all.SCORE} file.
+@item J M-#
+@kindex J M-# (Agent Summary)
+@findex gnus-agent-unmark-article
+Remove the downloading mark from the article
+(@code{gnus-agent-unmark-article}).
-The score files are applied in a semi-random order, although Gnus will
-try to apply the more general score files before the more specific score
-files. It does this by looking at the number of elements in the score
-file names---discarding the @samp{all} elements.
+@cindex %
+@item @@
+@kindex @@ (Agent Summary)
+@findex gnus-agent-toggle-mark
+Toggle whether to download the article
+(@code{gnus-agent-toggle-mark}). The dowload mark is @samp{%} by
+default.
-@item gnus-score-find-hierarchical
-@findex gnus-score-find-hierarchical
-Apply all score files from all the parent groups. This means that you
-can't have score files like @file{all.SCORE}, but you can have
-@file{SCORE}, @file{comp.SCORE} and @file{comp.emacs.SCORE}.
+@item J c
+@kindex J c (Agent Summary)
+@findex gnus-agent-catchup
+Mark all undownloaded articles as read (@code{gnus-agent-catchup}).
+
+@item J u
+@kindex J u (Agent Summary)
+@findex gnus-agent-summary-fetch-group
+Download all downloadable articles in the current group
+(@code{gnus-agent-summary-fetch-group}).
@end table
-This variable can also be a list of functions. In that case, all these
-functions will be called, and all the returned lists of score files will
-be applied. These functions can also return lists of score alists
-directly. In that case, the functions that return these non-file score
-alists should probably be placed before the ``real'' score file
-functions, to ensure that the last score file returned is the local
-score file. Phu.
-@item gnus-score-expiry-days
-@vindex gnus-score-expiry-days
-This variable says how many days should pass before an unused score file
-entry is expired. If this variable is @code{nil}, no score file entries
-are expired. It's 7 by default.
-@item gnus-update-score-entry-dates
-@vindex gnus-update-score-entry-dates
-If this variable is non-@code{nil}, matching score entries will have
-their dates updated. (This is how Gnus controls expiry---all
-non-matching entries will become too old while matching entries will
-stay fresh and young.) However, if you set this variable to @code{nil},
-even matching entries will grow old and will have to face that oh-so
-grim reaper.
+@node Server Agent Commands
+@subsubsection Server Agent Commands
-@item gnus-score-after-write-file-function
-@vindex gnus-score-after-write-file-function
-Function called with the name of the score file just written.
+@table @kbd
+@item J a
+@kindex J a (Agent Server)
+@findex gnus-agent-add-server
+Add the current server to the list of servers covered by the Gnus Agent
+(@code{gnus-agent-add-server}).
-@item gnus-score-thread-simplify
-@vindex gnus-score-thread-simplify
-If this variable is non-@code{nil}, article subjects will be simplified
-for subject scoring purposes in the same manner as with
-threading---according to the current value of
-gnus-simplify-subject-functions. If the scoring entry uses
-@code{substring} or @code{exact} matching, the match will also be
-simplified in this manner.
+@item J r
+@kindex J r (Agent Server)
+@findex gnus-agent-remove-server
+Remove the current server from the list of servers covered by the Gnus
+Agent (@code{gnus-agent-remove-server}).
@end table
-@node Score File Format
-@section Score File Format
-@cindex score file format
+@node Agent as Cache
+@subsection Agent as Cache
-A score file is an @code{emacs-lisp} file that normally contains just a
-single form. Casual users are not expected to edit these files;
-everything can be changed from the summary buffer.
+When Gnus is plugged, it is not efficient to download headers or
+articles from the server again, if they are already stored in the
+Agent. So, Gnus normally only downloads headers once, and stores them
+in the Agent. These headers are later used when generating the summary
+buffer, regardless of whether you are plugged or unplugged. Articles
+are not cached in the Agent by default though (that would potentially
+consume lots of disk space), but if you have already downloaded an
+article into the Agent, Gnus will not download the article from the
+server again but use the locally stored copy instead.
-Anyway, if you'd like to dig into it yourself, here's an example:
+This behaviour can be controlled by @code{gnus-agent-cache}
+(@pxref{Agent Variables}).
+
+@node Agent Expiry
+@subsection Agent Expiry
+
+@vindex gnus-agent-expire-days
+@findex gnus-agent-expire
+@kindex M-x gnus-agent-expire
+@cindex Agent expiry
+@cindex Gnus Agent expiry
+@cindex expiry
+
+@code{nnagent} doesn't handle expiry. Instead, there's a special
+@code{gnus-agent-expire} command that will expire all read articles that
+are older than @code{gnus-agent-expire-days} days. It can be run
+whenever you feel that you're running out of space. It's not
+particularly fast or efficient, and it's not a particularly good idea to
+interrupt it (with @kbd{C-g} or anything else) once you've started it.
+
+@code{gnus-agent-expire-days} can also be a list of regexp/day pairs.
+The regexps will be matched against group names to allow differing
+expiry in different groups.
@lisp
-(("from"
- ("Lars Ingebrigtsen" -10000)
- ("Per Abrahamsen")
- ("larsi\\|lmi" -50000 nil R))
- ("subject"
- ("Ding is Badd" nil 728373))
- ("xref"
- ("alt.politics" -1000 728372 s))
- ("lines"
- (2 -100 nil <))
- (mark 0)
- (expunge -1000)
- (mark-and-expunge -10)
- (read-only nil)
- (orphan -10)
- (adapt t)
- (files "/hom/larsi/News/gnu.SCORE")
- (exclude-files "all.SCORE")
- (local (gnus-newsgroup-auto-expire t)
- (gnus-summary-make-false-root empty))
- (eval (ding)))
+(setq gnus-agent-expire-days
+ '(("alt\\." 7)
+ (".*binary" 1)
+ ("." 21)))
@end lisp
-This example demonstrates most score file elements. For a different
-approach, see @pxref{Advanced Scoring}.
+If you use the list form, the last element must always be the default
+method---it must always match all groups.
-Even though this looks much like lisp code, nothing here is actually
-@code{eval}ed. The lisp reader is used to read this form, though, so it
-has to be valid syntactically, if not semantically.
+@vindex gnus-agent-expire-all
+If @code{gnus-agent-expire-all} is non-@code{nil}, this command will
+expire all articles---unread, read, ticked and dormant. If @code{nil}
+(which is the default), only read articles are eligible for expiry, and
+unread, ticked and dormant articles will be kept indefinitely.
-Six keys are supported by this alist:
+@findex gnus-agent-regenerate
+If you find that some articles eligible for expiry are never expired,
+perhaps some Gnus Agent files are corrupted. There's a special
+@code{gnus-agent-regenerate} command to fix possible problems.
-@table @code
+@node Agent and IMAP
+@subsection Agent and IMAP
-@item STRING
-If the key is a string, it is the name of the header to perform the
-match on. Scoring can only be performed on these eight headers:
-@code{From}, @code{Subject}, @code{References}, @code{Message-ID},
-@code{Xref}, @code{Lines}, @code{Chars} and @code{Date}. In addition to
-these headers, there are three strings to tell Gnus to fetch the entire
-article and do the match on larger parts of the article: @code{Body}
-will perform the match on the body of the article, @code{Head} will
-perform the match on the head of the article, and @code{All} will
-perform the match on the entire article. Note that using any of these
-last three keys will slow down group entry @emph{considerably}. The
-final ``header'' you can score on is @code{Followup}. These score
-entries will result in new score entries being added for all follow-ups
-to articles that matches these score entries.
+The Agent work with any Gnus back end, including nnimap. However,
+since there are some conceptual differences between @sc{nntp} and
+@sc{imap}, this section (should) provide you with some information to
+make Gnus Agent work smoother as a @sc{imap} Disconnected Mode client.
-Following this key is a arbitrary number of score entries, where each
-score entry has one to four elements.
-@enumerate
+The first thing to keep in mind is that all flags (read, ticked, etc)
+are kept on the @sc{imap} server, rather than in @code{.newsrc} as is the
+case for nntp. Thus Gnus need to remember flag changes when
+disconnected, and synchronize these flags when you plug back in.
-@item
-The first element is the @dfn{match element}. On most headers this will
-be a string, but on the Lines and Chars headers, this must be an
-integer.
+Gnus keeps track of flag changes when reading nnimap groups under the
+Agent. When you plug back in, Gnus will check if you have any changed
+any flags and ask if you wish to synchronize these with the server.
+The behavior is customizable by @code{gnus-agent-synchronize-flags}.
-@item
-If the second element is present, it should be a number---the @dfn{score
-element}. This number should be an integer in the neginf to posinf
-interval. This number is added to the score of the article if the match
-is successful. If this element is not present, the
-@code{gnus-score-interactive-default-score} number will be used
-instead. This is 1000 by default.
+@vindex gnus-agent-synchronize-flags
+If @code{gnus-agent-synchronize-flags} is @code{nil}, the Agent will
+never automatically synchronize flags. If it is @code{ask}, which is
+the default, the Agent will check if you made any changes and if so
+ask if you wish to synchronize these when you re-connect. If it has
+any other value, all flags will be synchronized automatically.
+
+If you do not wish to synchronize flags automatically when you
+re-connect, you can do it manually with the
+@code{gnus-agent-synchronize-flags} command that is bound to @kbd{J Y}
+in the group buffer.
+
+Some things are currently not implemented in the Agent that you'd might
+expect from a disconnected @sc{imap} client, including:
+
+@itemize @bullet
@item
-If the third element is present, it should be a number---the @dfn{date
-element}. This date says when the last time this score entry matched,
-which provides a mechanism for expiring the score entries. It this
-element is not present, the score entry is permanent. The date is
-represented by the number of days since December 31, 1 BCE.
+Copying/moving articles into nnimap groups when unplugged.
@item
-If the fourth element is present, it should be a symbol---the @dfn{type
-element}. This element specifies what function should be used to see
-whether this score entry matches the article. What match types that can
-be used depends on what header you wish to perform the match on.
-@table @dfn
+Creating/deleting nnimap groups when unplugged.
-@item From, Subject, References, Xref, Message-ID
-For most header types, there are the @code{r} and @code{R} (regexp), as
-well as @code{s} and @code{S} (substring) types, and @code{e} and
-@code{E} (exact match), and @code{w} (word match) types. If this
-element is not present, Gnus will assume that substring matching should
-be used. @code{R}, @code{S}, and @code{E} differ from the others in
-that the matches will be done in a case-sensitive manner. All these
-one-letter types are really just abbreviations for the @code{regexp},
-@code{string}, @code{exact}, and @code{word} types, which you can use
-instead, if you feel like.
+@end itemize
-@item Lines, Chars
-These two headers use different match types: @code{<}, @code{>},
-@code{=}, @code{>=} and @code{<=}.
+Technical note: the synchronization algorithm does not work by "pushing"
+all local flags to the server, but rather incrementally update the
+server view of flags by changing only those flags that were changed by
+the user. Thus, if you set one flag on a article, quit the group and
+re-select the group and remove the flag; the flag will be set and
+removed from the server when you "synchronize". The queued flag
+operations can be found in the per-server @code{flags} file in the Agent
+directory. It's emptied when you synchronize flags.
-These predicates are true if
-@example
-(PREDICATE HEADER MATCH)
-@end example
+@node Outgoing Messages
+@subsection Outgoing Messages
-evaluates to non-@code{nil}. For instance, the advanced match
-@code{("lines" 4 <)} (@pxref{Advanced Scoring}) will result in the
-following form:
+When Gnus is unplugged, all outgoing messages (both mail and news) are
+stored in the draft group ``queue'' (@pxref{Drafts}). You can view
+them there after posting, and edit them at will.
-@lisp
-(< header-value 4)
-@end lisp
+When Gnus is plugged again, you can send the messages either from the
+draft group with the special commands available there, or you can use
+the @kbd{J S} command in the group buffer to send all the sendable
+messages in the draft group.
-Or to put it another way: When using @code{<} on @code{Lines} with 4 as
-the match, we get the score added if the article has less than 4 lines.
-(It's easy to get confused and think it's the other way around. But
-it's not. I think.)
-When matching on @code{Lines}, be careful because some backends (like
-@code{nndir}) do not generate @code{Lines} header, so every article ends
-up being marked as having 0 lines. This can lead to strange results if
-you happen to lower score of the articles with few lines.
-@item Date
-For the Date header we have three kinda silly match types:
-@code{before}, @code{at} and @code{after}. I can't really imagine this
-ever being useful, but, like, it would feel kinda silly not to provide
-this function. Just in case. You never know. Better safe than sorry.
-Once burnt, twice shy. Don't judge a book by its cover. Never not have
-sex on a first date. (I have been told that at least one person, and I
-quote, ``found this function indispensable'', however.)
+@node Agent Variables
+@subsection Agent Variables
-@cindex ISO8601
-@cindex date
-A more useful match type is @code{regexp}. With it, you can match the
-date string using a regular expression. The date is normalized to
-ISO8601 compact format first---@var{YYYYMMDD}@code{T}@var{HHMMSS}. If
-you want to match all articles that have been posted on April 1st in
-every year, you could use @samp{....0401.........} as a match string,
-for instance. (Note that the date is kept in its original time zone, so
-this will match articles that were posted when it was April 1st where
-the article was posted from. Time zones are such wholesome fun for the
-whole family, eh?)
+@table @code
+@item gnus-agent-directory
+@vindex gnus-agent-directory
+Where the Gnus Agent will store its files. The default is
+@file{~/News/agent/}.
-@item Head, Body, All
-These three match keys use the same match types as the @code{From} (etc)
-header uses.
+@item gnus-agent-handle-level
+@vindex gnus-agent-handle-level
+Groups on levels (@pxref{Group Levels}) higher than this variable will
+be ignored by the Agent. The default is @code{gnus-level-subscribed},
+which means that only subscribed group will be considered by the Agent
+by default.
-@item Followup
-This match key is somewhat special, in that it will match the
-@code{From} header, and affect the score of not only the matching
-articles, but also all followups to the matching articles. This allows
-you e.g. increase the score of followups to your own articles, or
-decrease the score of followups to the articles of some known
-trouble-maker. Uses the same match types as the @code{From} header
-uses. (Using this match key will lead to creation of @file{ADAPT}
-files.)
+@item gnus-agent-plugged-hook
+@vindex gnus-agent-plugged-hook
+Hook run when connecting to the network.
+
+@item gnus-agent-unplugged-hook
+@vindex gnus-agent-unplugged-hook
+Hook run when disconnecting from the network.
+
+@item gnus-agent-fetched-hook
+@vindex gnus-agent-fetched-hook
+Hook run when after finishing fetching articles.
+
+@item gnus-agent-cache
+@vindex gnus-agent-cache
+Variable to control whether use the locally stored @sc{nov} and
+articles when plugged, e.g. essentially using the Agent as a cache.
+The default is non-nil, which means to use the Agent as a cache.
+
+@item gnus-agent-go-online
+@vindex gnus-agent-go-online
+If @code{gnus-agent-go-online} is @code{nil}, the Agent will never
+automatically switch offline servers into online status. If it is
+@code{ask}, the default, the Agent will ask if you wish to switch
+offline servers into online status when you re-connect. If it has any
+other value, all offline servers will be automatically switched into
+online status.
+
+@item gnus-server-unopen-status
+@vindex gnus-server-unopen-status
+Perhaps not a Agent variable, but closely related to the Agent, this
+variable says what will happen if Gnus cannot open a server. If the
+Agent is enabled, the default, @code{nil}, makes Gnus ask the user
+whether to deny the server or whether to unplug the agent. If the
+Agent is disabled, Gnus always simply deny the server. Other choices
+for this variable include @code{denied} and @code{offline} the latter
+is only valid if the Agent is used.
-@item Thread
-This match key works along the same lines as the @code{Followup} match
-key. If you say that you want to score on a (sub-)thread started by an article with a @code{Message-ID} @var{X}, then you add a
-@samp{thread} match. This will add a new @samp{thread} match for each
-article that has @var{X} in its @code{References} header. (These new
-@samp{thread} matches will use the @code{Message-ID}s of these matching
-articles.) This will ensure that you can raise/lower the score of an
-entire thread, even though some articles in the thread may not have
-complete @code{References} headers. Note that using this may lead to
-undeterministic scores of the articles in the thread. (Using this match
-key will lead to creation of @file{ADAPT} files.)
@end table
-@end enumerate
-@cindex Score File Atoms
-@item mark
-The value of this entry should be a number. Any articles with a score
-lower than this number will be marked as read.
-@item expunge
-The value of this entry should be a number. Any articles with a score
-lower than this number will be removed from the summary buffer.
+@node Example Setup
+@subsection Example Setup
-@item mark-and-expunge
-The value of this entry should be a number. Any articles with a score
-lower than this number will be marked as read and removed from the
-summary buffer.
+If you don't want to read this manual, and you have a fairly standard
+setup, you may be able to use something like the following as your
+@file{.gnus.el} file to get started.
-@item thread-mark-and-expunge
-The value of this entry should be a number. All articles that belong to
-a thread that has a total score below this number will be marked as read
-and removed from the summary buffer. @code{gnus-thread-score-function}
-says how to compute the total score for a thread.
+@lisp
+;;; Define how Gnus is to fetch news. We do this over @sc{nntp}
+;;; from your ISP's server.
+(setq gnus-select-method '(nntp "news.your-isp.com"))
-@item files
-The value of this entry should be any number of file names. These files
-are assumed to be score files as well, and will be loaded the same way
-this one was.
+;;; Define how Gnus is to read your mail. We read mail from
+;;; your ISP's POP server.
+(setq mail-sources '((pop :server "pop.your-isp.com")))
-@item exclude-files
-The clue of this entry should be any number of files. These files will
-not be loaded, even though they would normally be so, for some reason or
-other.
+;;; Say how Gnus is to store the mail. We use nnml groups.
+(setq gnus-secondary-select-methods '((nnml "")))
-@item eval
-The value of this entry will be @code{eval}el. This element will be
-ignored when handling global score files.
+;;; Make Gnus into an offline newsreader.
+;;; (gnus-agentize) ; The obsolete setting.
+;;; (setq gnus-agent t) ; Now the default.
+@end lisp
-@item read-only
-Read-only score files will not be updated or saved. Global score files
-should feature this atom (@pxref{Global Score Files}). (Note:
-@dfn{Global} here really means @dfn{global}; not your personal
-apply-to-all-groups score files.)
+That should be it, basically. Put that in your @file{~/.gnus.el} file,
+edit to suit your needs, start up PPP (or whatever), and type @kbd{M-x
+gnus}.
-@item orphan
-The value of this entry should be a number. Articles that do not have
-parents will get this number added to their scores. Imagine you follow
-some high-volume newsgroup, like @samp{comp.lang.c}. Most likely you
-will only follow a few of the threads, also want to see any new threads.
+If this is the first time you've run Gnus, you will be subscribed
+automatically to a few default newsgroups. You'll probably want to
+subscribe to more groups, and to do that, you have to query the
+@sc{nntp} server for a complete list of groups with the @kbd{A A}
+command. This usually takes quite a while, but you only have to do it
+once.
-You can do this with the following two score file entries:
+After reading and parsing a while, you'll be presented with a list of
+groups. Subscribe to the ones you want to read with the @kbd{u}
+command. @kbd{l} to make all the killed groups disappear after you've
+subscribe to all the groups you want to read. (@kbd{A k} will bring
+back all the killed groups.)
+
+You can now read the groups at once, or you can download the articles
+with the @kbd{J s} command. And then read the rest of this manual to
+find out which of the other gazillion things you want to customize.
+
+
+@node Batching Agents
+@subsection Batching Agents
+
+Having the Gnus Agent fetch articles (and post whatever messages you've
+written) is quite easy once you've gotten things set up properly. The
+following shell script will do everything that is necessary:
+
+You can run a complete batch command from the command line with the
+following incantation:
@example
- (orphan -500)
- (mark-and-expunge -100)
+#!/bin/sh
+emacs -batch -l ~/.emacs -f -l ~/.gnus.el gnus-agent-batch >/dev/null 2>&1
@end example
-When you enter the group the first time, you will only see the new
-threads. You then raise the score of the threads that you find
-interesting (with @kbd{I T} or @kbd{I S}), and ignore (@kbd{C y}) the
-rest. Next time you enter the group, you will see new articles in the
-interesting threads, plus any new threads.
-
-I.e.---the orphan score atom is for high-volume groups where there
-exist a few interesting threads which can't be found automatically by
-ordinary scoring rules.
-@item adapt
-This entry controls the adaptive scoring. If it is @code{t}, the
-default adaptive scoring rules will be used. If it is @code{ignore}, no
-adaptive scoring will be performed on this group. If it is a list, this
-list will be used as the adaptive scoring rules. If it isn't present,
-or is something other than @code{t} or @code{ignore}, the default
-adaptive scoring rules will be used. If you want to use adaptive
-scoring on most groups, you'd set @code{gnus-use-adaptive-scoring} to
-@code{t}, and insert an @code{(adapt ignore)} in the groups where you do
-not want adaptive scoring. If you only want adaptive scoring in a few
-groups, you'd set @code{gnus-use-adaptive-scoring} to @code{nil}, and
-insert @code{(adapt t)} in the score files of the groups where you want
-it.
+@node Agent Caveats
+@subsection Agent Caveats
-@item adapt-file
-All adaptive score entries will go to the file named by this entry. It
-will also be applied when entering the group. This atom might be handy
-if you want to adapt on several groups at once, using the same adaptive
-file for a number of groups.
+The Gnus Agent doesn't seem to work like most other offline
+newsreaders. Here are some common questions that some imaginary people
+may ask:
-@item local
-@cindex local variables
-The value of this entry should be a list of @code{(VAR VALUE)} pairs.
-Each @var{var} will be made buffer-local to the current summary buffer,
-and set to the value specified. This is a convenient, if somewhat
-strange, way of setting variables in some groups if you don't like hooks
-much. Note that the @var{value} won't be evaluated.
-@end table
+@table @dfn
+@item If I read an article while plugged, do they get entered into the Agent?
+@strong{No}. If you want this behaviour, add
+@code{gnus-agent-fetch-selected-article} to
+@code{gnus-select-article-hook}.
-@node Score File Editing
-@section Score File Editing
+@item If I read an article while plugged, and the article already exists in the Agent, will it get downloaded once more?
-You normally enter all scoring commands from the summary buffer, but you
-might feel the urge to edit them by hand as well, so we've supplied you
-with a mode for that.
+@strong{No}, unless @code{gnus-agent-cache} is `nil'.
-It's simply a slightly customized @code{emacs-lisp} mode, with these
-additional commands:
+@end table
-@table @kbd
+In short, when Gnus is unplugged, it only looks into the locally stored
+articles; when it's plugged, it only talks to your ISP and also uses the
+locally stored articles.
-@item C-c C-c
-@kindex C-c C-c (Score)
-@findex gnus-score-edit-done
-Save the changes you have made and return to the summary buffer
-(@code{gnus-score-edit-done}).
-@item C-c C-d
-@kindex C-c C-d (Score)
-@findex gnus-score-edit-insert-date
-Insert the current date in numerical format
-(@code{gnus-score-edit-insert-date}). This is really the day number, if
-you were wondering.
+@node Scoring
+@chapter Scoring
+@cindex scoring
-@item C-c C-p
-@kindex C-c C-p (Score)
-@findex gnus-score-pretty-print
-The adaptive score files are saved in an unformatted fashion. If you
-intend to read one of these files, you want to @dfn{pretty print} it
-first. This command (@code{gnus-score-pretty-print}) does that for
-you.
+Other people use @dfn{kill files}, but we here at Gnus Towers like
+scoring better than killing, so we'd rather switch than fight. They do
+something completely different as well, so sit up straight and pay
+attention!
-@end table
+@vindex gnus-summary-mark-below
+All articles have a default score (@code{gnus-summary-default-score}),
+which is 0 by default. This score may be raised or lowered either
+interactively or by score files. Articles that have a score lower than
+@code{gnus-summary-mark-below} are marked as read.
-Type @kbd{M-x gnus-score-mode} to use this mode.
+Gnus will read any @dfn{score files} that apply to the current group
+before generating the summary buffer.
-@vindex gnus-score-mode-hook
-@code{gnus-score-menu-hook} is run in score mode buffers.
+There are several commands in the summary buffer that insert score
+entries based on the current article. You can, for instance, ask Gnus to
+lower or increase the score of all articles with a certain subject.
-In the summary buffer you can use commands like @kbd{V f} and @kbd{V
-e} to begin editing score files.
+There are two sorts of scoring entries: Permanent and temporary.
+Temporary score entries are self-expiring entries. Any entries that are
+temporary and have not been used for, say, a week, will be removed
+silently to help keep the sizes of the score files down.
+@menu
+* Summary Score Commands:: Adding score entries for the current group.
+* Group Score Commands:: General score commands.
+* Score Variables:: Customize your scoring. (My, what terminology).
+* Score File Format:: What a score file may contain.
+* Score File Editing:: You can edit score files by hand as well.
+* Adaptive Scoring:: Big Sister Gnus knows what you read.
+* Home Score File:: How to say where new score entries are to go.
+* Followups To Yourself:: Having Gnus notice when people answer you.
+* Scoring On Other Headers:: Scoring on non-standard headers.
+* Scoring Tips:: How to score effectively.
+* Reverse Scoring:: That problem child of old is not problem.
+* Global Score Files:: Earth-spanning, ear-splitting score files.
+* Kill Files:: They are still here, but they can be ignored.
+* Converting Kill Files:: Translating kill files to score files.
+* GroupLens:: Getting predictions on what you like to read.
+* Advanced Scoring:: Using logical expressions to build score rules.
+* Score Decays:: It can be useful to let scores wither away.
+@end menu
-@node Adaptive Scoring
-@section Adaptive Scoring
-@cindex adaptive scoring
-If all this scoring is getting you down, Gnus has a way of making it all
-happen automatically---as if by magic. Or rather, as if by artificial
-stupidity, to be precise.
+@node Summary Score Commands
+@section Summary Score Commands
+@cindex score commands
-@vindex gnus-use-adaptive-scoring
-When you read an article, or mark an article as read, or kill an
-article, you leave marks behind. On exit from the group, Gnus can sniff
-these marks and add score elements depending on what marks it finds.
-You turn on this ability by setting @code{gnus-use-adaptive-scoring} to
-@code{t} or @code{(line)}. If you want score adaptively on separate
-words appearing in the subjects, you should set this variable to
-@code{(word)}. If you want to use both adaptive methods, set this
-variable to @code{(word line)}.
+The score commands that alter score entries do not actually modify real
+score files. That would be too inefficient. Gnus maintains a cache of
+previously loaded score files, one of which is considered the
+@dfn{current score file alist}. The score commands simply insert
+entries into this list, and upon group exit, this list is saved.
-@vindex gnus-default-adaptive-score-alist
-To give you complete control over the scoring process, you can customize
-the @code{gnus-default-adaptive-score-alist} variable. For instance, it
-might look something like this:
+The current score file is by default the group's local score file, even
+if no such score file actually exists. To insert score commands into
+some other score file (e.g. @file{all.SCORE}), you must first make this
+score file the current one.
-@lisp
-(defvar gnus-default-adaptive-score-alist
- '((gnus-unread-mark)
- (gnus-ticked-mark (from 4))
- (gnus-dormant-mark (from 5))
- (gnus-del-mark (from -4) (subject -1))
- (gnus-read-mark (from 4) (subject 2))
- (gnus-expirable-mark (from -1) (subject -1))
- (gnus-killed-mark (from -1) (subject -3))
- (gnus-kill-file-mark)
- (gnus-ancient-mark)
- (gnus-low-score-mark)
- (gnus-catchup-mark (from -1) (subject -1))))
-@end lisp
+General score commands that don't actually change the score file:
-As you see, each element in this alist has a mark as a key (either a
-variable name or a ``real'' mark---a character). Following this key is
-a arbitrary number of header/score pairs. If there are no header/score
-pairs following the key, no adaptive scoring will be done on articles
-that have that key as the article mark. For instance, articles with
-@code{gnus-unread-mark} in the example above will not get adaptive score
-entries.
+@table @kbd
-Each article can have only one mark, so just a single of these rules
-will be applied to each article.
+@item V s
+@kindex V s (Summary)
+@findex gnus-summary-set-score
+Set the score of the current article (@code{gnus-summary-set-score}).
-To take @code{gnus-del-mark} as an example---this alist says that all
-articles that have that mark (i.e., are marked with @samp{D}) will have a
-score entry added to lower based on the @code{From} header by -4, and
-lowered by @code{Subject} by -1. Change this to fit your prejudices.
+@item V S
+@kindex V S (Summary)
+@findex gnus-summary-current-score
+Display the score of the current article
+(@code{gnus-summary-current-score}).
-If you have marked 10 articles with the same subject with
-@code{gnus-del-mark}, the rule for that mark will be applied ten times.
-That means that that subject will get a score of ten times -1, which
-should be, unless I'm much mistaken, -10.
+@item V t
+@kindex V t (Summary)
+@findex gnus-score-find-trace
+Display all score rules that have been used on the current article
+(@code{gnus-score-find-trace}).
-If you have auto-expirable (mail) groups (@pxref{Expiring Mail}), all
-the read articles will be marked with the @samp{E} mark. This'll
-probably make adaptive scoring slightly impossible, so auto-expiring and
-adaptive scoring doesn't really mix very well.
+@item V w
+@kindex V w (Summary)
+@findex gnus-score-find-favourite-words
+List words used in scoring (@code{gnus-score-find-favourite-words}).
-The headers you can score on are @code{from}, @code{subject},
-@code{message-id}, @code{references}, @code{xref}, @code{lines},
-@code{chars} and @code{date}. In addition, you can score on
-@code{followup}, which will create an adaptive score entry that matches
-on the @code{References} header using the @code{Message-ID} of the
-current article, thereby matching the following thread.
+@item V R
+@kindex V R (Summary)
+@findex gnus-summary-rescore
+Run the current summary through the scoring process
+(@code{gnus-summary-rescore}). This might be useful if you're playing
+around with your score files behind Gnus' back and want to see the
+effect you're having.
-You can also score on @code{thread}, which will try to score all
-articles that appear in a thread. @code{thread} matches uses a
-@code{Message-ID} to match on the @code{References} header of the
-article. If the match is made, the @code{Message-ID} of the article is
-added to the @code{thread} rule. (Think about it. I'd recommend two
-aspirins afterwards.)
+@item V c
+@kindex V c (Summary)
+@findex gnus-score-change-score-file
+Make a different score file the current
+(@code{gnus-score-change-score-file}).
-If you use this scheme, you should set the score file atom @code{mark}
-to something small---like -300, perhaps, to avoid having small random
-changes result in articles getting marked as read.
+@item V e
+@kindex V e (Summary)
+@findex gnus-score-edit-current-scores
+Edit the current score file (@code{gnus-score-edit-current-scores}).
+You will be popped into a @code{gnus-score-mode} buffer (@pxref{Score
+File Editing}).
-After using adaptive scoring for a week or so, Gnus should start to
-become properly trained and enhance the authors you like best, and kill
-the authors you like least, without you having to say so explicitly.
+@item V f
+@kindex V f (Summary)
+@findex gnus-score-edit-file
+Edit a score file and make this score file the current one
+(@code{gnus-score-edit-file}).
-You can control what groups the adaptive scoring is to be performed on
-by using the score files (@pxref{Score File Format}). This will also
-let you use different rules in different groups.
+@item V F
+@kindex V F (Summary)
+@findex gnus-score-flush-cache
+Flush the score cache (@code{gnus-score-flush-cache}). This is useful
+after editing score files.
-@vindex gnus-adaptive-file-suffix
-The adaptive score entries will be put into a file where the name is the
-group name with @code{gnus-adaptive-file-suffix} appended. The default
-is @samp{ADAPT}.
+@item V C
+@kindex V C (Summary)
+@findex gnus-score-customize
+Customize a score file in a visually pleasing manner
+(@code{gnus-score-customize}).
-@vindex gnus-score-exact-adapt-limit
-When doing adaptive scoring, substring or fuzzy matching would probably
-give you the best results in most cases. However, if the header one
-matches is short, the possibility for false positives is great, so if
-the length of the match is less than
-@code{gnus-score-exact-adapt-limit}, exact matching will be used. If
-this variable is @code{nil}, exact matching will always be used to avoid
-this problem.
+@end table
-@vindex gnus-default-adaptive-word-score-alist
-As mentioned above, you can adapt either on individual words or entire
-headers. If you adapt on words, the
-@code{gnus-default-adaptive-word-score-alist} variable says what score
-each instance of a word should add given a mark.
+The rest of these commands modify the local score file.
-@lisp
-(setq gnus-default-adaptive-word-score-alist
- `((,gnus-read-mark . 30)
- (,gnus-catchup-mark . -10)
- (,gnus-killed-mark . -20)
- (,gnus-del-mark . -15)))
-@end lisp
+@table @kbd
-This is the default value. If you have adaption on words enabled, every
-word that appears in subjects of articles marked with
-@code{gnus-read-mark} will result in a score rule that increase the
-score with 30 points.
+@item V m
+@kindex V m (Summary)
+@findex gnus-score-set-mark-below
+Prompt for a score, and mark all articles with a score below this as
+read (@code{gnus-score-set-mark-below}).
-@vindex gnus-default-ignored-adaptive-words
-@vindex gnus-ignored-adaptive-words
-Words that appear in the @code{gnus-default-ignored-adaptive-words} list
-will be ignored. If you wish to add more words to be ignored, use the
-@code{gnus-ignored-adaptive-words} list instead.
+@item V x
+@kindex V x (Summary)
+@findex gnus-score-set-expunge-below
+Prompt for a score, and add a score rule to the current score file to
+expunge all articles below this score
+(@code{gnus-score-set-expunge-below}).
+@end table
-@vindex gnus-adaptive-word-syntax-table
-When the scoring is done, @code{gnus-adaptive-word-syntax-table} is the
-syntax table in effect. It is similar to the standard syntax table, but
-it considers numbers to be non-word-constituent characters.
+The keystrokes for actually making score entries follow a very regular
+pattern, so there's no need to list all the commands. (Hundreds of
+them.)
-@vindex gnus-adaptive-word-minimum
-If @code{gnus-adaptive-word-minimum} is set to a number, the adaptive
-word scoring process will never bring down the score of an article to
-below this number. The default is @code{nil}.
+@findex gnus-summary-increase-score
+@findex gnus-summary-lower-score
-@vindex gnus-adaptive-word-no-group-words
-If @code{gnus-adaptive-word-no-group-words} is set to @code{t}, gnus
-won't adaptively word score any of the words in the group name. Useful
-for groups like @samp{comp.editors.emacs}, where most of the subject
-lines contain the word @samp{emacs}.
+@enumerate
+@item
+The first key is either @kbd{I} (upper case i) for increasing the score
+or @kbd{L} for lowering the score.
+@item
+The second key says what header you want to score on. The following
+keys are available:
+@table @kbd
-After using this scheme for a while, it might be nice to write a
-@code{gnus-psychoanalyze-user} command to go through the rules and see
-what words you like and what words you don't like. Or perhaps not.
+@item a
+Score on the author name.
-Note that the adaptive word scoring thing is highly experimental and is
-likely to change in the future. Initial impressions seem to indicate
-that it's totally useless as it stands. Some more work (involving more
-rigorous statistical methods) will have to be done to make this useful.
+@item s
+Score on the subject line.
+@item x
+Score on the @code{Xref} line---i.e., the cross-posting line.
-@node Home Score File
-@section Home Score File
+@item r
+Score on the @code{References} line.
-The score file where new score file entries will go is called the
-@dfn{home score file}. This is normally (and by default) the score file
-for the group itself. For instance, the home score file for
-@samp{gnu.emacs.gnus} is @file{gnu.emacs.gnus.SCORE}.
+@item d
+Score on the date.
-However, this may not be what you want. It is often convenient to share
-a common home score file among many groups---all @samp{emacs} groups
-could perhaps use the same home score file.
+@item l
+Score on the number of lines.
-@vindex gnus-home-score-file
-The variable that controls this is @code{gnus-home-score-file}. It can
-be:
+@item i
+Score on the @code{Message-ID} header.
-@enumerate
-@item
-A string. Then this file will be used as the home score file for all
-groups.
+@item e
+Score on an "extra" header, that is, one of those in gnus-extra-headers,
+if your @sc{nntp} server tracks additional header data in overviews.
-@item
-A function. The result of this function will be used as the home score
-file. The function will be called with the name of the group as the
-parameter.
+@item f
+Score on followups---this matches the author name, and adds scores to
+the followups to this author. (Using this key leads to the creation of
+@file{ADAPT} files.)
-@item
-A list. The elements in this list can be:
+@item b
+Score on the body.
-@enumerate
-@item
-@var{(regexp file-name)}. If the @var{regexp} matches the group name,
-the @var{file-name} will will be used as the home score file.
+@item h
+Score on the head.
-@item
-A function. If the function returns non-nil, the result will be used as
-the home score file.
+@item t
+Score on thread. (Using this key leads to the creation of @file{ADAPT}
+files.)
+
+@end table
@item
-A string. Use the string as the home score file.
-@end enumerate
+The third key is the match type. Which match types are valid depends on
+what headers you are scoring on.
-The list will be traversed from the beginning towards the end looking
-for matches.
+@table @code
-@end enumerate
+@item strings
-So, if you want to use just a single score file, you could say:
+@table @kbd
-@lisp
-(setq gnus-home-score-file
- "my-total-score-file.SCORE")
-@end lisp
+@item e
+Exact matching.
-If you want to use @file{gnu.SCORE} for all @samp{gnu} groups and
-@file{rec.SCORE} for all @samp{rec} groups (and so on), you can say:
+@item s
+Substring matching.
-@findex gnus-hierarchial-home-score-file
-@lisp
-(setq gnus-home-score-file
- 'gnus-hierarchial-home-score-file)
-@end lisp
+@item f
+Fuzzy matching (@pxref{Fuzzy Matching}).
-This is a ready-made function provided for your convenience.
-Other functions include
+@item r
+Regexp matching
+@end table
-@table @code
-@item gnus-current-home-score-file
-@findex gnus-current-home-score-file
-Return the ``current'' regular score file. This will make scoring
-commands add entry to the ``innermost'' matching score file.
+@item date
+@table @kbd
-@end table
+@item b
+Before date.
-If you want to have one score file for the @samp{emacs} groups and
-another for the @samp{comp} groups, while letting all other groups use
-their own home score files:
+@item a
+After date.
-@lisp
-(setq gnus-home-score-file
- ;; All groups that match the regexp "\\.emacs"
- '(("\\.emacs" "emacs.SCORE")
- ;; All the comp groups in one score file
- ("^comp" "comp.SCORE")))
-@end lisp
+@item n
+This date.
+@end table
-@vindex gnus-home-adapt-file
-@code{gnus-home-adapt-file} works exactly the same way as
-@code{gnus-home-score-file}, but says what the home adaptive score file
-is instead. All new adaptive file entries will go into the file
-specified by this variable, and the same syntax is allowed.
+@item number
+@table @kbd
-In addition to using @code{gnus-home-score-file} and
-@code{gnus-home-adapt-file}, you can also use group parameters
-(@pxref{Group Parameters}) and topic parameters (@pxref{Topic
-Parameters}) to achieve much the same. Group and topic parameters take
-precedence over this variable.
+@item <
+Less than number.
+@item =
+Equal to number.
-@node Followups To Yourself
-@section Followups To Yourself
+@item >
+Greater than number.
+@end table
+@end table
-Gnus offers two commands for picking out the @code{Message-ID} header in
-the current buffer. Gnus will then add a score rule that scores using
-this @code{Message-ID} on the @code{References} header of other
-articles. This will, in effect, increase the score of all articles that
-respond to the article in the current buffer. Quite useful if you want
-to easily note when people answer what you've said.
+@item
+The fourth and usually final key says whether this is a temporary (i.e.,
+expiring) score entry, or a permanent (i.e., non-expiring) score entry,
+or whether it is to be done immediately, without adding to the score
+file.
+@table @kbd
-@table @code
+@item t
+Temporary score entry.
-@item gnus-score-followup-article
-@findex gnus-score-followup-article
-This will add a score to articles that directly follow up your own
-article.
+@item p
+Permanent score entry.
-@item gnus-score-followup-thread
-@findex gnus-score-followup-thread
-This will add a score to all articles that appear in a thread ``below''
-your own article.
+@item i
+Immediately scoring.
@end table
-@vindex message-sent-hook
-These two functions are both primarily meant to be used in hooks like
-@code{message-sent-hook}.
+@item
+If you are scoring on `e' (extra) headers, you will then be prompted for
+the header name on which you wish to score. This must be a header named
+in gnus-extra-headers, and @samp{TAB} completion is available.
-If you look closely at your own @code{Message-ID}, you'll notice that
-the first two or three characters are always the same. Here's two of
-mine:
+@end enumerate
-@example
-<x6u3u47icf.fsf@@eyesore.no>
-<x6sp9o7ibw.fsf@@eyesore.no>
-@end example
+So, let's say you want to increase the score on the current author with
+exact matching permanently: @kbd{I a e p}. If you want to lower the
+score based on the subject line, using substring matching, and make a
+temporary score entry: @kbd{L s s t}. Pretty easy.
-So ``my'' ident on this machine is @samp{x6}. This can be
-exploited---the following rule will raise the score on all followups to
-myself:
+To make things a bit more complicated, there are shortcuts. If you use
+a capital letter on either the second or third keys, Gnus will use
+defaults for the remaining one or two keystrokes. The defaults are
+``substring'' and ``temporary''. So @kbd{I A} is the same as @kbd{I a s
+t}, and @kbd{I a R} is the same as @kbd{I a r t}.
-@lisp
-("references"
- ("<x6[0-9a-z]+\\.fsf\\(_-_\\)?@@.*eyesore.no>"
- 1000 nil r))
-@end lisp
+These functions take both the numerical prefix and the symbolic prefix
+(@pxref{Symbolic Prefixes}). A numerical prefix says how much to lower
+(or increase) the score of the article. A symbolic prefix of @code{a}
+says to use the @file{all.SCORE} file for the command instead of the
+current score file.
-Whether it's the first two or first three characters that are ``yours''
-is system-dependent.
+@vindex gnus-score-mimic-keymap
+The @code{gnus-score-mimic-keymap} says whether these commands will
+pretend they are keymaps or not.
-@node Scoring Tips
-@section Scoring Tips
-@cindex scoring tips
+@node Group Score Commands
+@section Group Score Commands
+@cindex group score commands
-@table @dfn
+There aren't many of these as yet, I'm afraid.
-@item Crossposts
-@cindex crossposts
-@cindex scoring crossposts
-If you want to lower the score of crossposts, the line to match on is
-the @code{Xref} header.
-@lisp
-("xref" (" talk.politics.misc:" -1000))
-@end lisp
+@table @kbd
-@item Multiple crossposts
-If you want to lower the score of articles that have been crossposted to
-more than, say, 3 groups:
-@lisp
-("xref" ("[^:\n]+:[0-9]+ +[^:\n]+:[0-9]+ +[^:\n]+:[0-9]+" -1000 nil r))
-@end lisp
-
-@item Matching on the body
-This is generally not a very good idea---it takes a very long time.
-Gnus actually has to fetch each individual article from the server. But
-you might want to anyway, I guess. Even though there are three match
-keys (@code{Head}, @code{Body} and @code{All}), you should choose one
-and stick with it in each score file. If you use any two, each article
-will be fetched @emph{twice}. If you want to match a bit on the
-@code{Head} and a bit on the @code{Body}, just use @code{All} for all
-the matches.
-
-@item Marking as read
-You will probably want to mark articles that has a score below a certain
-number as read. This is most easily achieved by putting the following
-in your @file{all.SCORE} file:
-@lisp
-((mark -100))
-@end lisp
-You may also consider doing something similar with @code{expunge}.
+@item W f
+@kindex W f (Group)
+@findex gnus-score-flush-cache
+Gnus maintains a cache of score alists to avoid having to reload them
+all the time. This command will flush the cache
+(@code{gnus-score-flush-cache}).
-@item Negated character classes
-If you say stuff like @code{[^abcd]*}, you may get unexpected results.
-That will match newlines, which might lead to, well, The Unknown. Say
-@code{[^abcd\n]*} instead.
@end table
+You can do scoring from the command line by saying something like:
-@node Reverse Scoring
-@section Reverse Scoring
-@cindex reverse scoring
+@findex gnus-batch-score
+@cindex batch scoring
+@example
+$ emacs -batch -l ~/.emacs -l ~/.gnus.el -f gnus-batch-score
+@end example
-If you want to keep just articles that have @samp{Sex with Emacs} in the
-subject header, and expunge all other articles, you could put something
-like this in your score file:
-@lisp
-(("subject"
- ("Sex with Emacs" 2))
- (mark 1)
- (expunge 1))
-@end lisp
+@node Score Variables
+@section Score Variables
+@cindex score variables
-So, you raise all articles that match @samp{Sex with Emacs} and mark the
-rest as read, and expunge them to boot.
+@table @code
+@item gnus-use-scoring
+@vindex gnus-use-scoring
+If @code{nil}, Gnus will not check for score files, and will not, in
+general, do any score-related work. This is @code{t} by default.
-@node Global Score Files
-@section Global Score Files
-@cindex global score files
+@item gnus-kill-killed
+@vindex gnus-kill-killed
+If this variable is @code{nil}, Gnus will never apply score files to
+articles that have already been through the kill process. While this
+may save you lots of time, it also means that if you apply a kill file
+to a group, and then change the kill file and want to run it over you
+group again to kill more articles, it won't work. You have to set this
+variable to @code{t} to do that. (It is @code{t} by default.)
-Sure, other newsreaders have ``global kill files''. These are usually
-nothing more than a single kill file that applies to all groups, stored
-in the user's home directory. Bah! Puny, weak newsreaders!
+@item gnus-kill-files-directory
+@vindex gnus-kill-files-directory
+All kill and score files will be stored in this directory, which is
+initialized from the @code{SAVEDIR} environment variable by default.
+This is @file{~/News/} by default.
-What I'm talking about here are Global Score Files. Score files from
-all over the world, from users everywhere, uniting all nations in one
-big, happy score file union! Ange-score! New and untested!
+@item gnus-score-file-suffix
+@vindex gnus-score-file-suffix
+Suffix to add to the group name to arrive at the score file name
+(@samp{SCORE} by default.)
-@vindex gnus-global-score-files
-All you have to do to use other people's score files is to set the
-@code{gnus-global-score-files} variable. One entry for each score file,
-or each score file directory. Gnus will decide by itself what score
-files are applicable to which group.
+@item gnus-score-uncacheable-files
+@vindex gnus-score-uncacheable-files
+@cindex score cache
+All score files are normally cached to avoid excessive re-loading of
+score files. However, if this might make your Emacs grow big and
+bloated, so this regexp can be used to weed out score files unlikely to be needed again. It would be a bad idea to deny caching of
+@file{all.SCORE}, while it might be a good idea to not cache
+@file{comp.infosystems.www.authoring.misc.ADAPT}. In fact, this
+variable is @samp{ADAPT$} by default, so no adaptive score files will
+be cached.
-Say you want to use the score file
-@file{/ftp@@ftp.gnus.org:/pub/larsi/ding/score/soc.motss.SCORE} and
-all score files in the @file{/ftp@@ftp.some-where:/pub/score} directory:
+@item gnus-save-score
+@vindex gnus-save-score
+If you have really complicated score files, and do lots of batch
+scoring, then you might set this variable to @code{t}. This will make
+Gnus save the scores into the @file{.newsrc.eld} file.
-@lisp
-(setq gnus-global-score-files
- '("/ftp@@ftp.gnus.org:/pub/larsi/ding/score/soc.motss.SCORE"
- "/ftp@@ftp.some-where:/pub/score/"))
-@end lisp
+If you do not set this to @code{t}, then manual scores (like those set
+with @kbd{V s} (@code{gnus-summary-set-score})) will not be preserved
+across group visits.
-@findex gnus-score-search-global-directories
-Simple, eh? Directory names must end with a @samp{/}. These
-directories are typically scanned only once during each Gnus session.
-If you feel the need to manually re-scan the remote directories, you can
-use the @code{gnus-score-search-global-directories} command.
+@item gnus-score-interactive-default-score
+@vindex gnus-score-interactive-default-score
+Score used by all the interactive raise/lower commands to raise/lower
+score with. Default is 1000, which may seem excessive, but this is to
+ensure that the adaptive scoring scheme gets enough room to play with.
+We don't want the small changes from the adaptive scoring to overwrite
+manually entered data.
-Note that, at present, using this option will slow down group entry
-somewhat. (That is---a lot.)
+@item gnus-summary-default-score
+@vindex gnus-summary-default-score
+Default score of an article, which is 0 by default.
-If you want to start maintaining score files for other people to use,
-just put your score file up for anonymous ftp and announce it to the
-world. Become a retro-moderator! Participate in the retro-moderator
-wars sure to ensue, where retro-moderators battle it out for the
-sympathy of the people, luring them to use their score files on false
-premises! Yay! The net is saved!
+@item gnus-summary-expunge-below
+@vindex gnus-summary-expunge-below
+Don't display the summary lines of articles that have scores lower than
+this variable. This is @code{nil} by default, which means that no
+articles will be hidden. This variable is local to the summary buffers,
+and has to be set from @code{gnus-summary-mode-hook}.
-Here are some tips for the would-be retro-moderator, off the top of my
-head:
+@item gnus-score-over-mark
+@vindex gnus-score-over-mark
+Mark (in the third column) used for articles with a score over the
+default. Default is @samp{+}.
-@itemize @bullet
+@item gnus-score-below-mark
+@vindex gnus-score-below-mark
+Mark (in the third column) used for articles with a score below the
+default. Default is @samp{-}.
-@item
-Articles heavily crossposted are probably junk.
-@item
-To lower a single inappropriate article, lower by @code{Message-ID}.
-@item
-Particularly brilliant authors can be raised on a permanent basis.
-@item
-Authors that repeatedly post off-charter for the group can safely be
-lowered out of existence.
-@item
-Set the @code{mark} and @code{expunge} atoms to obliterate the nastiest
-articles completely.
+@item gnus-score-find-score-files-function
+@vindex gnus-score-find-score-files-function
+Function used to find score files for the current group. This function
+is called with the name of the group as the argument.
-@item
-Use expiring score entries to keep the size of the file down. You
-should probably have a long expiry period, though, as some sites keep
-old articles for a long time.
-@end itemize
+Predefined functions available are:
+@table @code
-... I wonder whether other newsreaders will support global score files
-in the future. @emph{Snicker}. Yup, any day now, newsreaders like Blue
-Wave, xrn and 1stReader are bound to implement scoring. Should we start
-holding our breath yet?
+@item gnus-score-find-single
+@findex gnus-score-find-single
+Only apply the group's own score file.
+@item gnus-score-find-bnews
+@findex gnus-score-find-bnews
+Apply all score files that match, using bnews syntax. This is the
+default. If the current group is @samp{gnu.emacs.gnus}, for instance,
+@file{all.emacs.all.SCORE}, @file{not.alt.all.SCORE} and
+@file{gnu.all.SCORE} would all apply. In short, the instances of
+@samp{all} in the score file names are translated into @samp{.*}, and
+then a regexp match is done.
-@node Kill Files
-@section Kill Files
-@cindex kill files
+This means that if you have some score entries that you want to apply to
+all groups, then you put those entries in the @file{all.SCORE} file.
-Gnus still supports those pesky old kill files. In fact, the kill file
-entries can now be expiring, which is something I wrote before Daniel
-Quinlan thought of doing score files, so I've left the code in there.
+The score files are applied in a semi-random order, although Gnus will
+try to apply the more general score files before the more specific score
+files. It does this by looking at the number of elements in the score
+file names---discarding the @samp{all} elements.
-In short, kill processing is a lot slower (and I do mean @emph{a lot})
-than score processing, so it might be a good idea to rewrite your kill
-files into score files.
+@item gnus-score-find-hierarchical
+@findex gnus-score-find-hierarchical
+Apply all score files from all the parent groups. This means that you
+can't have score files like @file{all.SCORE}, but you can have
+@file{SCORE}, @file{comp.SCORE} and @file{comp.emacs.SCORE} for each
+server.
-Anyway, a kill file is a normal @code{emacs-lisp} file. You can put any
-forms into this file, which means that you can use kill files as some
-sort of primitive hook function to be run on group entry, even though
-that isn't a very good idea.
+@end table
+This variable can also be a list of functions. In that case, all
+these functions will be called with the group name as argument, and
+all the returned lists of score files will be applied. These
+functions can also return lists of lists of score alists directly. In
+that case, the functions that return these non-file score alists
+should probably be placed before the ``real'' score file functions, to
+ensure that the last score file returned is the local score file.
+Phu.
+
+For example, to do hierarchical scoring but use a non-server-specific
+overall score file, you could use the value
+@example
+(list (lambda (group) ("all.SCORE"))
+ 'gnus-score-find-hierarchical)
+@end example
-Normal kill files look like this:
+@item gnus-score-expiry-days
+@vindex gnus-score-expiry-days
+This variable says how many days should pass before an unused score file
+entry is expired. If this variable is @code{nil}, no score file entries
+are expired. It's 7 by default.
-@lisp
-(gnus-kill "From" "Lars Ingebrigtsen")
-(gnus-kill "Subject" "ding")
-(gnus-expunge "X")
-@end lisp
+@item gnus-update-score-entry-dates
+@vindex gnus-update-score-entry-dates
+If this variable is non-@code{nil}, temporary score entries that have
+been triggered (matched) will have their dates updated. (This is how Gnus
+controls expiry---all non-matched-entries will become too old while
+matched entries will stay fresh and young.) However, if you set this
+variable to @code{nil}, even matched entries will grow old and will
+have to face that oh-so grim reaper.
-This will mark every article written by me as read, and remove the
-marked articles from the summary buffer. Very useful, you'll agree.
+@item gnus-score-after-write-file-function
+@vindex gnus-score-after-write-file-function
+Function called with the name of the score file just written.
-Other programs use a totally different kill file syntax. If Gnus
-encounters what looks like a @code{rn} kill file, it will take a stab at
-interpreting it.
+@item gnus-score-thread-simplify
+@vindex gnus-score-thread-simplify
+If this variable is non-@code{nil}, article subjects will be simplified
+for subject scoring purposes in the same manner as with
+threading---according to the current value of
+gnus-simplify-subject-functions. If the scoring entry uses
+@code{substring} or @code{exact} matching, the match will also be
+simplified in this manner.
-Two summary functions for editing a GNUS kill file:
+@end table
-@table @kbd
-@item M-k
-@kindex M-k (Summary)
-@findex gnus-summary-edit-local-kill
-Edit this group's kill file (@code{gnus-summary-edit-local-kill}).
+@node Score File Format
+@section Score File Format
+@cindex score file format
-@item M-K
-@kindex M-K (Summary)
-@findex gnus-summary-edit-global-kill
-Edit the general kill file (@code{gnus-summary-edit-global-kill}).
-@end table
+A score file is an @code{emacs-lisp} file that normally contains just a
+single form. Casual users are not expected to edit these files;
+everything can be changed from the summary buffer.
-Two group mode functions for editing the kill files:
+Anyway, if you'd like to dig into it yourself, here's an example:
-@table @kbd
+@lisp
+(("from"
+ ("Lars Ingebrigtsen" -10000)
+ ("Per Abrahamsen")
+ ("larsi\\|lmi" -50000 nil R))
+ ("subject"
+ ("Ding is Badd" nil 728373))
+ ("xref"
+ ("alt.politics" -1000 728372 s))
+ ("lines"
+ (2 -100 nil <))
+ (mark 0)
+ (expunge -1000)
+ (mark-and-expunge -10)
+ (read-only nil)
+ (orphan -10)
+ (adapt t)
+ (files "/hom/larsi/News/gnu.SCORE")
+ (exclude-files "all.SCORE")
+ (local (gnus-newsgroup-auto-expire t)
+ (gnus-summary-make-false-root empty))
+ (eval (ding)))
+@end lisp
-@item M-k
-@kindex M-k (Group)
-@findex gnus-group-edit-local-kill
-Edit this group's kill file (@code{gnus-group-edit-local-kill}).
+This example demonstrates most score file elements. For a different
+approach, see @pxref{Advanced Scoring}.
-@item M-K
-@kindex M-K (Group)
-@findex gnus-group-edit-global-kill
-Edit the general kill file (@code{gnus-group-edit-global-kill}).
-@end table
+Even though this looks much like lisp code, nothing here is actually
+@code{eval}ed. The lisp reader is used to read this form, though, so it
+has to be valid syntactically, if not semantically.
-Kill file variables:
+Six keys are supported by this alist:
@table @code
-@item gnus-kill-file-name
-@vindex gnus-kill-file-name
-A kill file for the group @samp{soc.motss} is normally called
-@file{soc.motss.KILL}. The suffix appended to the group name to get
-this file name is detailed by the @code{gnus-kill-file-name} variable.
-The ``global'' kill file (not in the score file sense of ``global'', of
-course) is just called @file{KILL}.
-
-@vindex gnus-kill-save-kill-file
-@item gnus-kill-save-kill-file
-If this variable is non-@code{nil}, Gnus will save the
-kill file after processing, which is necessary if you use expiring
-kills.
-
-@item gnus-apply-kill-hook
-@vindex gnus-apply-kill-hook
-@findex gnus-apply-kill-file-unless-scored
-@findex gnus-apply-kill-file
-A hook called to apply kill files to a group. It is
-@code{(gnus-apply-kill-file)} by default. If you want to ignore the
-kill file if you have a score file for the same group, you can set this
-hook to @code{(gnus-apply-kill-file-unless-scored)}. If you don't want
-kill files to be processed, you should set this variable to @code{nil}.
-@item gnus-kill-file-mode-hook
-@vindex gnus-kill-file-mode-hook
-A hook called in kill-file mode buffers.
+@item STRING
+If the key is a string, it is the name of the header to perform the
+match on. Scoring can only be performed on these eight headers:
+@code{From}, @code{Subject}, @code{References}, @code{Message-ID},
+@code{Xref}, @code{Lines}, @code{Chars} and @code{Date}. In addition to
+these headers, there are three strings to tell Gnus to fetch the entire
+article and do the match on larger parts of the article: @code{Body}
+will perform the match on the body of the article, @code{Head} will
+perform the match on the head of the article, and @code{All} will
+perform the match on the entire article. Note that using any of these
+last three keys will slow down group entry @emph{considerably}. The
+final ``header'' you can score on is @code{Followup}. These score
+entries will result in new score entries being added for all follow-ups
+to articles that matches these score entries.
-@end table
+Following this key is a arbitrary number of score entries, where each
+score entry has one to four elements.
+@enumerate
+@item
+The first element is the @dfn{match element}. On most headers this will
+be a string, but on the Lines and Chars headers, this must be an
+integer.
-@node Converting Kill Files
-@section Converting Kill Files
-@cindex kill files
-@cindex converting kill files
+@item
+If the second element is present, it should be a number---the @dfn{score
+element}. This number should be an integer in the neginf to posinf
+interval. This number is added to the score of the article if the match
+is successful. If this element is not present, the
+@code{gnus-score-interactive-default-score} number will be used
+instead. This is 1000 by default.
-If you have loads of old kill files, you may want to convert them into
-score files. If they are ``regular'', you can use
-the @file{gnus-kill-to-score.el} package; if not, you'll have to do it
-by hand.
+@item
+If the third element is present, it should be a number---the @dfn{date
+element}. This date says when the last time this score entry matched,
+which provides a mechanism for expiring the score entries. It this
+element is not present, the score entry is permanent. The date is
+represented by the number of days since December 31, 1 BCE.
-The kill to score conversion package isn't included in Gnus by default.
-You can fetch it from
-@file{http://www.stud.ifi.uio.no/~larsi/ding-other/gnus-kill-to-score}.
+@item
+If the fourth element is present, it should be a symbol---the @dfn{type
+element}. This element specifies what function should be used to see
+whether this score entry matches the article. What match types that can
+be used depends on what header you wish to perform the match on.
+@table @dfn
-If your old kill files are very complex---if they contain more
-non-@code{gnus-kill} forms than not, you'll have to convert them by
-hand. Or just let them be as they are. Gnus will still use them as
-before.
+@item From, Subject, References, Xref, Message-ID
+For most header types, there are the @code{r} and @code{R} (regexp), as
+well as @code{s} and @code{S} (substring) types, and @code{e} and
+@code{E} (exact match), and @code{w} (word match) types. If this
+element is not present, Gnus will assume that substring matching should
+be used. @code{R}, @code{S}, and @code{E} differ from the others in
+that the matches will be done in a case-sensitive manner. All these
+one-letter types are really just abbreviations for the @code{regexp},
+@code{string}, @code{exact}, and @code{word} types, which you can use
+instead, if you feel like.
+@item Extra
+Just as for the standard string overview headers, if you are using
+gnus-extra-headers, you can score on these headers' values. In this
+case, there is a 5th element in the score entry, being the name of the
+header to be scored. The following entry is useful in your
+@file{all.SCORE} file in case of spam attacks from a single origin host,
+if your @sc{nntp} server tracks NNTP-Posting-Host in overviews:
-@node GroupLens
-@section GroupLens
-@cindex GroupLens
+@lisp
+("111.222.333.444" -1000 nil s "NNTP-Posting-Host")
+@end lisp
-GroupLens is a collaborative filtering system that helps you work
-together with other people to find the quality news articles out of the
-huge volume of news articles generated every day.
+@item Lines, Chars
+These two headers use different match types: @code{<}, @code{>},
+@code{=}, @code{>=} and @code{<=}.
-To accomplish this the GroupLens system combines your opinions about
-articles you have already read with the opinions of others who have done
-likewise and gives you a personalized prediction for each unread news
-article. Think of GroupLens as a matchmaker. GroupLens watches how you
-rate articles, and finds other people that rate articles the same way.
-Once it has found some people you agree with it tells you, in the form
-of a prediction, what they thought of the article. You can use this
-prediction to help you decide whether or not you want to read the
-article.
+These predicates are true if
-@menu
-* Using GroupLens:: How to make Gnus use GroupLens.
-* Rating Articles:: Letting GroupLens know how you rate articles.
-* Displaying Predictions:: Displaying predictions given by GroupLens.
-* GroupLens Variables:: Customizing GroupLens.
-@end menu
+@example
+(PREDICATE HEADER MATCH)
+@end example
+evaluates to non-@code{nil}. For instance, the advanced match
+@code{("lines" 4 <)} (@pxref{Advanced Scoring}) will result in the
+following form:
-@node Using GroupLens
-@subsection Using GroupLens
+@lisp
+(< header-value 4)
+@end lisp
-To use GroupLens you must register a pseudonym with your local Better
-Bit Bureau (BBB).
-@samp{http://www.cs.umn.edu/Research/GroupLens/bbb.html} is the only
-better bit in town at the moment.
+Or to put it another way: When using @code{<} on @code{Lines} with 4 as
+the match, we get the score added if the article has less than 4 lines.
+(It's easy to get confused and think it's the other way around. But
+it's not. I think.)
-Once you have registered you'll need to set a couple of variables.
+When matching on @code{Lines}, be careful because some back ends (like
+@code{nndir}) do not generate @code{Lines} header, so every article ends
+up being marked as having 0 lines. This can lead to strange results if
+you happen to lower score of the articles with few lines.
-@table @code
+@item Date
+For the Date header we have three kinda silly match types:
+@code{before}, @code{at} and @code{after}. I can't really imagine this
+ever being useful, but, like, it would feel kinda silly not to provide
+this function. Just in case. You never know. Better safe than sorry.
+Once burnt, twice shy. Don't judge a book by its cover. Never not have
+sex on a first date. (I have been told that at least one person, and I
+quote, ``found this function indispensable'', however.)
-@item gnus-use-grouplens
-@vindex gnus-use-grouplens
-Setting this variable to a non-@code{nil} value will make Gnus hook into
-all the relevant GroupLens functions.
+@cindex ISO8601
+@cindex date
+A more useful match type is @code{regexp}. With it, you can match the
+date string using a regular expression. The date is normalized to
+ISO8601 compact format first---@var{YYYYMMDD}@code{T}@var{HHMMSS}. If
+you want to match all articles that have been posted on April 1st in
+every year, you could use @samp{....0401.........} as a match string,
+for instance. (Note that the date is kept in its original time zone, so
+this will match articles that were posted when it was April 1st where
+the article was posted from. Time zones are such wholesome fun for the
+whole family, eh?)
-@item grouplens-pseudonym
-@vindex grouplens-pseudonym
-This variable should be set to the pseudonym you got when registering
-with the Better Bit Bureau.
+@item Head, Body, All
+These three match keys use the same match types as the @code{From} (etc)
+header uses.
-@item grouplens-newsgroups
-@vindex grouplens-newsgroups
-A list of groups that you want to get GroupLens predictions for.
+@item Followup
+This match key is somewhat special, in that it will match the
+@code{From} header, and affect the score of not only the matching
+articles, but also all followups to the matching articles. This allows
+you e.g. increase the score of followups to your own articles, or
+decrease the score of followups to the articles of some known
+trouble-maker. Uses the same match types as the @code{From} header
+uses. (Using this match key will lead to creation of @file{ADAPT}
+files.)
+@item Thread
+This match key works along the same lines as the @code{Followup} match
+key. If you say that you want to score on a (sub-)thread started by an
+article with a @code{Message-ID} @var{x}, then you add a @samp{thread}
+match. This will add a new @samp{thread} match for each article that
+has @var{x} in its @code{References} header. (These new @samp{thread}
+matches will use the @code{Message-ID}s of these matching articles.)
+This will ensure that you can raise/lower the score of an entire thread,
+even though some articles in the thread may not have complete
+@code{References} headers. Note that using this may lead to
+undeterministic scores of the articles in the thread. (Using this match
+key will lead to creation of @file{ADAPT} files.)
@end table
+@end enumerate
-That's the minimum of what you need to get up and running with GroupLens.
-Once you've registered, GroupLens will start giving you scores for
-articles based on the average of what other people think. But, to get
-the real benefit of GroupLens you need to start rating articles
-yourself. Then the scores GroupLens gives you will be personalized for
-you, based on how the people you usually agree with have already rated.
-
-
-@node Rating Articles
-@subsection Rating Articles
+@cindex Score File Atoms
+@item mark
+The value of this entry should be a number. Any articles with a score
+lower than this number will be marked as read.
-In GroupLens, an article is rated on a scale from 1 to 5, inclusive.
-Where 1 means something like this article is a waste of bandwidth and 5
-means that the article was really good. The basic question to ask
-yourself is, "on a scale from 1 to 5 would I like to see more articles
-like this one?"
+@item expunge
+The value of this entry should be a number. Any articles with a score
+lower than this number will be removed from the summary buffer.
-There are four ways to enter a rating for an article in GroupLens.
+@item mark-and-expunge
+The value of this entry should be a number. Any articles with a score
+lower than this number will be marked as read and removed from the
+summary buffer.
-@table @kbd
-
-@item r
-@kindex r (GroupLens)
-@findex bbb-summary-rate-article
-This function will prompt you for a rating on a scale of one to five.
-
-@item k
-@kindex k (GroupLens)
-@findex grouplens-score-thread
-This function will prompt you for a rating, and rate all the articles in
-the thread. This is really useful for some of those long running giant
-threads in rec.humor.
+@item thread-mark-and-expunge
+The value of this entry should be a number. All articles that belong to
+a thread that has a total score below this number will be marked as read
+and removed from the summary buffer. @code{gnus-thread-score-function}
+says how to compute the total score for a thread.
-@end table
+@item files
+The value of this entry should be any number of file names. These files
+are assumed to be score files as well, and will be loaded the same way
+this one was.
-The next two commands, @kbd{n} and @kbd{,} take a numerical prefix to be
-the score of the article you're reading.
+@item exclude-files
+The clue of this entry should be any number of files. These files will
+not be loaded, even though they would normally be so, for some reason or
+other.
-@table @kbd
+@item eval
+The value of this entry will be @code{eval}el. This element will be
+ignored when handling global score files.
-@item 1-5 n
-@kindex n (GroupLens)
-@findex grouplens-next-unread-article
-Rate the article and go to the next unread article.
+@item read-only
+Read-only score files will not be updated or saved. Global score files
+should feature this atom (@pxref{Global Score Files}). (Note:
+@dfn{Global} here really means @dfn{global}; not your personal
+apply-to-all-groups score files.)
-@item 1-5 ,
-@kindex , (GroupLens)
-@findex grouplens-best-unread-article
-Rate the article and go to the next unread article with the highest score.
+@item orphan
+The value of this entry should be a number. Articles that do not have
+parents will get this number added to their scores. Imagine you follow
+some high-volume newsgroup, like @samp{comp.lang.c}. Most likely you
+will only follow a few of the threads, also want to see any new threads.
-@end table
+You can do this with the following two score file entries:
-If you want to give the current article a score of 4 and then go to the
-next article, just type @kbd{4 n}.
+@example
+ (orphan -500)
+ (mark-and-expunge -100)
+@end example
+When you enter the group the first time, you will only see the new
+threads. You then raise the score of the threads that you find
+interesting (with @kbd{I T} or @kbd{I S}), and ignore (@kbd{C y}) the
+rest. Next time you enter the group, you will see new articles in the
+interesting threads, plus any new threads.
-@node Displaying Predictions
-@subsection Displaying Predictions
+I.e.---the orphan score atom is for high-volume groups where a few
+interesting threads which can't be found automatically by ordinary
+scoring rules exist.
-GroupLens makes a prediction for you about how much you will like a
-news article. The predictions from GroupLens are on a scale from 1 to
-5, where 1 is the worst and 5 is the best. You can use the predictions
-from GroupLens in one of three ways controlled by the variable
-@code{gnus-grouplens-override-scoring}.
+@item adapt
+This entry controls the adaptive scoring. If it is @code{t}, the
+default adaptive scoring rules will be used. If it is @code{ignore}, no
+adaptive scoring will be performed on this group. If it is a list, this
+list will be used as the adaptive scoring rules. If it isn't present,
+or is something other than @code{t} or @code{ignore}, the default
+adaptive scoring rules will be used. If you want to use adaptive
+scoring on most groups, you'd set @code{gnus-use-adaptive-scoring} to
+@code{t}, and insert an @code{(adapt ignore)} in the groups where you do
+not want adaptive scoring. If you only want adaptive scoring in a few
+groups, you'd set @code{gnus-use-adaptive-scoring} to @code{nil}, and
+insert @code{(adapt t)} in the score files of the groups where you want
+it.
-@vindex gnus-grouplens-override-scoring
-There are three ways to display predictions in grouplens. You may
-choose to have the GroupLens scores contribute to, or override the
-regular gnus scoring mechanism. override is the default; however, some
-people prefer to see the Gnus scores plus the grouplens scores. To get
-the separate scoring behavior you need to set
-@code{gnus-grouplens-override-scoring} to @code{'separate}. To have the
-GroupLens predictions combined with the grouplens scores set it to
-@code{'override} and to combine the scores set
-@code{gnus-grouplens-override-scoring} to @code{'combine}. When you use
-the combine option you will also want to set the values for
-@code{grouplens-prediction-offset} and
-@code{grouplens-score-scale-factor}.
+@item adapt-file
+All adaptive score entries will go to the file named by this entry. It
+will also be applied when entering the group. This atom might be handy
+if you want to adapt on several groups at once, using the same adaptive
+file for a number of groups.
-@vindex grouplens-prediction-display
-In either case, GroupLens gives you a few choices for how you would like
-to see your predictions displayed. The display of predictions is
-controlled by the @code{grouplens-prediction-display} variable.
+@item local
+@cindex local variables
+The value of this entry should be a list of @code{(VAR VALUE)} pairs.
+Each @var{var} will be made buffer-local to the current summary buffer,
+and set to the value specified. This is a convenient, if somewhat
+strange, way of setting variables in some groups if you don't like hooks
+much. Note that the @var{value} won't be evaluated.
+@end table
-The following are valid values for that variable.
-@table @code
-@item prediction-spot
-The higher the prediction, the further to the right an @samp{*} is
-displayed.
+@node Score File Editing
+@section Score File Editing
-@item confidence-interval
-A numeric confidence interval.
+You normally enter all scoring commands from the summary buffer, but you
+might feel the urge to edit them by hand as well, so we've supplied you
+with a mode for that.
-@item prediction-bar
-The higher the prediction, the longer the bar.
+It's simply a slightly customized @code{emacs-lisp} mode, with these
+additional commands:
-@item confidence-bar
-Numerical confidence.
+@table @kbd
-@item confidence-spot
-The spot gets bigger with more confidence.
+@item C-c C-c
+@kindex C-c C-c (Score)
+@findex gnus-score-edit-done
+Save the changes you have made and return to the summary buffer
+(@code{gnus-score-edit-done}).
-@item prediction-num
-Plain-old numeric value.
+@item C-c C-d
+@kindex C-c C-d (Score)
+@findex gnus-score-edit-insert-date
+Insert the current date in numerical format
+(@code{gnus-score-edit-insert-date}). This is really the day number, if
+you were wondering.
-@item confidence-plus-minus
-Prediction +/- confidence.
+@item C-c C-p
+@kindex C-c C-p (Score)
+@findex gnus-score-pretty-print
+The adaptive score files are saved in an unformatted fashion. If you
+intend to read one of these files, you want to @dfn{pretty print} it
+first. This command (@code{gnus-score-pretty-print}) does that for
+you.
@end table
+Type @kbd{M-x gnus-score-mode} to use this mode.
-@node GroupLens Variables
-@subsection GroupLens Variables
+@vindex gnus-score-mode-hook
+@code{gnus-score-menu-hook} is run in score mode buffers.
-@table @code
+In the summary buffer you can use commands like @kbd{V f} and @kbd{V
+e} to begin editing score files.
-@item gnus-summary-grouplens-line-format
-The summary line format used in GroupLens-enhanced summary buffers. It
-accepts the same specs as the normal summary line format (@pxref{Summary
-Buffer Lines}). The default is @samp{%U%R%z%l%I%(%[%4L: %-20,20n%]%)
-%s\n}.
-@item grouplens-bbb-host
-Host running the bbbd server. @samp{grouplens.cs.umn.edu} is the
-default.
+@node Adaptive Scoring
+@section Adaptive Scoring
+@cindex adaptive scoring
-@item grouplens-bbb-port
-Port of the host running the bbbd server. The default is 9000.
+If all this scoring is getting you down, Gnus has a way of making it all
+happen automatically---as if by magic. Or rather, as if by artificial
+stupidity, to be precise.
-@item grouplens-score-offset
-Offset the prediction by this value. In other words, subtract the
-prediction value by this number to arrive at the effective score. The
-default is 0.
+@vindex gnus-use-adaptive-scoring
+When you read an article, or mark an article as read, or kill an
+article, you leave marks behind. On exit from the group, Gnus can sniff
+these marks and add score elements depending on what marks it finds.
+You turn on this ability by setting @code{gnus-use-adaptive-scoring} to
+@code{t} or @code{(line)}. If you want score adaptively on separate
+words appearing in the subjects, you should set this variable to
+@code{(word)}. If you want to use both adaptive methods, set this
+variable to @code{(word line)}.
-@item grouplens-score-scale-factor
-This variable allows the user to magnify the effect of GroupLens scores.
-The scale factor is applied after the offset. The default is 1.
+@vindex gnus-default-adaptive-score-alist
+To give you complete control over the scoring process, you can customize
+the @code{gnus-default-adaptive-score-alist} variable. For instance, it
+might look something like this:
-@end table
+@lisp
+(setq gnus-default-adaptive-score-alist
+ '((gnus-unread-mark)
+ (gnus-ticked-mark (from 4))
+ (gnus-dormant-mark (from 5))
+ (gnus-del-mark (from -4) (subject -1))
+ (gnus-read-mark (from 4) (subject 2))
+ (gnus-expirable-mark (from -1) (subject -1))
+ (gnus-killed-mark (from -1) (subject -3))
+ (gnus-kill-file-mark)
+ (gnus-ancient-mark)
+ (gnus-low-score-mark)
+ (gnus-catchup-mark (from -1) (subject -1))))
+@end lisp
+As you see, each element in this alist has a mark as a key (either a
+variable name or a ``real'' mark---a character). Following this key is
+a arbitrary number of header/score pairs. If there are no header/score
+pairs following the key, no adaptive scoring will be done on articles
+that have that key as the article mark. For instance, articles with
+@code{gnus-unread-mark} in the example above will not get adaptive score
+entries.
-@node Advanced Scoring
-@section Advanced Scoring
+Each article can have only one mark, so just a single of these rules
+will be applied to each article.
-Scoring on Subjects and From headers is nice enough, but what if you're
-really interested in what a person has to say only when she's talking
-about a particular subject? Or what if you really don't want to
-read what person A has to say when she's following up to person B, but
-want to read what she says when she's following up to person C?
+To take @code{gnus-del-mark} as an example---this alist says that all
+articles that have that mark (i.e., are marked with @samp{D}) will have a
+score entry added to lower based on the @code{From} header by -4, and
+lowered by @code{Subject} by -1. Change this to fit your prejudices.
-By using advanced scoring rules you may create arbitrarily complex
-scoring patterns.
+If you have marked 10 articles with the same subject with
+@code{gnus-del-mark}, the rule for that mark will be applied ten times.
+That means that that subject will get a score of ten times -1, which
+should be, unless I'm much mistaken, -10.
-@menu
-* Advanced Scoring Syntax:: A definition.
-* Advanced Scoring Examples:: What they look like.
-* Advanced Scoring Tips:: Getting the most out of it.
-@end menu
+If you have auto-expirable (mail) groups (@pxref{Expiring Mail}), all
+the read articles will be marked with the @samp{E} mark. This'll
+probably make adaptive scoring slightly impossible, so auto-expiring and
+adaptive scoring doesn't really mix very well.
+The headers you can score on are @code{from}, @code{subject},
+@code{message-id}, @code{references}, @code{xref}, @code{lines},
+@code{chars} and @code{date}. In addition, you can score on
+@code{followup}, which will create an adaptive score entry that matches
+on the @code{References} header using the @code{Message-ID} of the
+current article, thereby matching the following thread.
-@node Advanced Scoring Syntax
-@subsection Advanced Scoring Syntax
+If you use this scheme, you should set the score file atom @code{mark}
+to something small---like -300, perhaps, to avoid having small random
+changes result in articles getting marked as read.
-Ordinary scoring rules have a string as the first element in the rule.
-Advanced scoring rules have a list as the first element. The second
-element is the score to be applied if the first element evaluated to a
-non-@code{nil} value.
+After using adaptive scoring for a week or so, Gnus should start to
+become properly trained and enhance the authors you like best, and kill
+the authors you like least, without you having to say so explicitly.
-These lists may consist of three logical operators, one redirection
-operator, and various match operators.
+You can control what groups the adaptive scoring is to be performed on
+by using the score files (@pxref{Score File Format}). This will also
+let you use different rules in different groups.
-Logical operators:
+@vindex gnus-adaptive-file-suffix
+The adaptive score entries will be put into a file where the name is the
+group name with @code{gnus-adaptive-file-suffix} appended. The default
+is @samp{ADAPT}.
-@table @code
-@item &
-@itemx and
-This logical operator will evaluate each of its arguments until it finds
-one that evaluates to @code{false}, and then it'll stop. If all arguments
-evaluate to @code{true} values, then this operator will return
-@code{true}.
+@vindex gnus-score-exact-adapt-limit
+When doing adaptive scoring, substring or fuzzy matching would probably
+give you the best results in most cases. However, if the header one
+matches is short, the possibility for false positives is great, so if
+the length of the match is less than
+@code{gnus-score-exact-adapt-limit}, exact matching will be used. If
+this variable is @code{nil}, exact matching will always be used to avoid
+this problem.
-@item |
-@itemx or
-This logical operator will evaluate each of its arguments until it finds
-one that evaluates to @code{true}. If no arguments are @code{true},
-then this operator will return @code{false}.
+@vindex gnus-default-adaptive-word-score-alist
+As mentioned above, you can adapt either on individual words or entire
+headers. If you adapt on words, the
+@code{gnus-default-adaptive-word-score-alist} variable says what score
+each instance of a word should add given a mark.
-@item !
-@itemx not
-@itemx ¬
-This logical operator only takes a single argument. It returns the
-logical negation of the value of its argument.
+@lisp
+(setq gnus-default-adaptive-word-score-alist
+ `((,gnus-read-mark . 30)
+ (,gnus-catchup-mark . -10)
+ (,gnus-killed-mark . -20)
+ (,gnus-del-mark . -15)))
+@end lisp
-@end table
+This is the default value. If you have adaption on words enabled, every
+word that appears in subjects of articles marked with
+@code{gnus-read-mark} will result in a score rule that increase the
+score with 30 points.
-There is an @dfn{indirection operator} that will make its arguments
-apply to the ancestors of the current article being scored. For
-instance, @code{1-} will make score rules apply to the parent of the
-current article. @code{2-} will make score rules apply to the
-grandparent of the current article. Alternatively, you can write
-@code{^^}, where the number of @code{^}s (carets) says how far back into
-the ancestry you want to go.
+@vindex gnus-default-ignored-adaptive-words
+@vindex gnus-ignored-adaptive-words
+Words that appear in the @code{gnus-default-ignored-adaptive-words} list
+will be ignored. If you wish to add more words to be ignored, use the
+@code{gnus-ignored-adaptive-words} list instead.
-Finally, we have the match operators. These are the ones that do the
-real work. Match operators are header name strings followed by a match
-and a match type. A typical match operator looks like @samp{("from"
-"Lars Ingebrigtsen" s)}. The header names are the same as when using
-simple scoring, and the match types are also the same.
+@vindex gnus-adaptive-word-length-limit
+Some may feel that short words shouldn't count when doing adaptive
+scoring. If so, you may set @code{gnus-adaptive-word-length-limit} to
+an integer. Words shorter than this number will be ignored. This
+variable defaults to @code{nil}.
+@vindex gnus-adaptive-word-syntax-table
+When the scoring is done, @code{gnus-adaptive-word-syntax-table} is the
+syntax table in effect. It is similar to the standard syntax table, but
+it considers numbers to be non-word-constituent characters.
-@node Advanced Scoring Examples
-@subsection Advanced Scoring Examples
+@vindex gnus-adaptive-word-minimum
+If @code{gnus-adaptive-word-minimum} is set to a number, the adaptive
+word scoring process will never bring down the score of an article to
+below this number. The default is @code{nil}.
-Let's say you want to increase the score of articles written by Lars
-when he's talking about Gnus:
+@vindex gnus-adaptive-word-no-group-words
+If @code{gnus-adaptive-word-no-group-words} is set to @code{t}, gnus
+won't adaptively word score any of the words in the group name. Useful
+for groups like @samp{comp.editors.emacs}, where most of the subject
+lines contain the word @samp{emacs}.
-@example
-((&
- ("from" "Lars Ingebrigtsen")
- ("subject" "Gnus"))
- 1000)
-@end example
+After using this scheme for a while, it might be nice to write a
+@code{gnus-psychoanalyze-user} command to go through the rules and see
+what words you like and what words you don't like. Or perhaps not.
-Quite simple, huh?
+Note that the adaptive word scoring thing is highly experimental and is
+likely to change in the future. Initial impressions seem to indicate
+that it's totally useless as it stands. Some more work (involving more
+rigorous statistical methods) will have to be done to make this useful.
-When he writes long articles, he sometimes has something nice to say:
-@example
-((&
- ("from" "Lars Ingebrigtsen")
- (|
- ("subject" "Gnus")
- ("lines" 100 >)))
- 1000)
-@end example
+@node Home Score File
+@section Home Score File
-However, when he responds to things written by Reig Eigil Logge, you
-really don't want to read what he's written:
+The score file where new score file entries will go is called the
+@dfn{home score file}. This is normally (and by default) the score file
+for the group itself. For instance, the home score file for
+@samp{gnu.emacs.gnus} is @file{gnu.emacs.gnus.SCORE}.
-@example
-((&
- ("from" "Lars Ingebrigtsen")
- (1- ("from" "Reig Eigir Logge")))
- -100000)
-@end example
+However, this may not be what you want. It is often convenient to share
+a common home score file among many groups---all @samp{emacs} groups
+could perhaps use the same home score file.
-Everybody that follows up Redmondo when he writes about disappearing
-socks should have their scores raised, but only when they talk about
-white socks. However, when Lars talks about socks, it's usually not
-very interesting:
+@vindex gnus-home-score-file
+The variable that controls this is @code{gnus-home-score-file}. It can
+be:
-@example
-((&
- (1-
- (&
- ("from" "redmondo@@.*no" r)
- ("body" "disappearing.*socks" t)))
- (! ("from" "Lars Ingebrigtsen"))
- ("body" "white.*socks"))
- 1000)
-@end example
+@enumerate
+@item
+A string. Then this file will be used as the home score file for all
+groups.
-The possibilities are endless.
+@item
+A function. The result of this function will be used as the home score
+file. The function will be called with the name of the group as the
+parameter.
+@item
+A list. The elements in this list can be:
-@node Advanced Scoring Tips
-@subsection Advanced Scoring Tips
+@enumerate
+@item
+@code{(@var{regexp} @var{file-name})}. If the @var{regexp} matches the
+group name, the @var{file-name} will be used as the home score file.
-The @code{&} and @code{|} logical operators do short-circuit logic.
-That is, they stop processing their arguments when it's clear what the
-result of the operation will be. For instance, if one of the arguments
-of an @code{&} evaluates to @code{false}, there's no point in evaluating
-the rest of the arguments. This means that you should put slow matches
-(@samp{body}, @samp{header}) last and quick matches (@samp{from},
-@samp{subject}) first.
+@item
+A function. If the function returns non-nil, the result will be used as
+the home score file.
-The indirection arguments (@code{1-} and so on) will make their
-arguments work on previous generations of the thread. If you say
-something like:
+@item
+A string. Use the string as the home score file.
+@end enumerate
-@example
-...
-(1-
- (1-
- ("from" "lars")))
-...
-@end example
+The list will be traversed from the beginning towards the end looking
+for matches.
-Then that means "score on the from header of the grandparent of the
-current article". An indirection is quite fast, but it's better to say:
+@end enumerate
-@example
-(1-
- (&
- ("from" "Lars")
- ("subject" "Gnus")))
-@end example
+So, if you want to use just a single score file, you could say:
-than it is to say:
+@lisp
+(setq gnus-home-score-file
+ "my-total-score-file.SCORE")
+@end lisp
-@example
-(&
- (1- ("from" "Lars"))
- (1- ("subject" "Gnus")))
-@end example
+If you want to use @file{gnu.SCORE} for all @samp{gnu} groups and
+@file{rec.SCORE} for all @samp{rec} groups (and so on), you can say:
+@findex gnus-hierarchial-home-score-file
+@lisp
+(setq gnus-home-score-file
+ 'gnus-hierarchial-home-score-file)
+@end lisp
-@node Score Decays
-@section Score Decays
-@cindex score decays
-@cindex decays
+This is a ready-made function provided for your convenience.
+Other functions include
-You may find that your scores have a tendency to grow without
-bounds, especially if you're using adaptive scoring. If scores get too
-big, they lose all meaning---they simply max out and it's difficult to
-use them in any sensible way.
+@table @code
+@item gnus-current-home-score-file
+@findex gnus-current-home-score-file
+Return the ``current'' regular score file. This will make scoring
+commands add entry to the ``innermost'' matching score file.
-@vindex gnus-decay-scores
-@findex gnus-decay-score
-@vindex gnus-decay-score-function
-Gnus provides a mechanism for decaying scores to help with this problem.
-When score files are loaded and @code{gnus-decay-scores} is
-non-@code{nil}, Gnus will run the score files through the decaying
-mechanism thereby lowering the scores of all non-permanent score rules.
-The decay itself if performed by the @code{gnus-decay-score-function}
-function, which is @code{gnus-decay-score} by default. Here's the
-definition of that function:
+@end table
+
+If you want to have one score file for the @samp{emacs} groups and
+another for the @samp{comp} groups, while letting all other groups use
+their own home score files:
@lisp
-(defun gnus-decay-score (score)
- "Decay SCORE.
-This is done according to `gnus-score-decay-constant'
-and `gnus-score-decay-scale'."
- (floor
- (- score
- (* (if (< score 0) 1 -1)
- (min (abs score)
- (max gnus-score-decay-constant
- (* (abs score)
- gnus-score-decay-scale)))))))
+(setq gnus-home-score-file
+ ;; All groups that match the regexp "\\.emacs"
+ '(("\\.emacs" "emacs.SCORE")
+ ;; All the comp groups in one score file
+ ("^comp" "comp.SCORE")))
@end lisp
-@vindex gnus-score-decay-scale
-@vindex gnus-score-decay-constant
-@code{gnus-score-decay-constant} is 3 by default and
-@code{gnus-score-decay-scale} is 0.05. This should cause the following:
+@vindex gnus-home-adapt-file
+@code{gnus-home-adapt-file} works exactly the same way as
+@code{gnus-home-score-file}, but says what the home adaptive score file
+is instead. All new adaptive file entries will go into the file
+specified by this variable, and the same syntax is allowed.
-@enumerate
-@item
-Scores between -3 and 3 will be set to 0 when this function is called.
+In addition to using @code{gnus-home-score-file} and
+@code{gnus-home-adapt-file}, you can also use group parameters
+(@pxref{Group Parameters}) and topic parameters (@pxref{Topic
+Parameters}) to achieve much the same. Group and topic parameters take
+precedence over this variable.
-@item
-Scores with magnitudes between 3 and 60 will be shrunk by 3.
-@item
-Scores with magnitudes greater than 60 will be shrunk by 5% of the
-score.
-@end enumerate
+@node Followups To Yourself
+@section Followups To Yourself
-If you don't like this decay function, write your own. It is called
-with the score to be decayed as its only parameter, and it should return
-the new score, which should be an integer.
+Gnus offers two commands for picking out the @code{Message-ID} header in
+the current buffer. Gnus will then add a score rule that scores using
+this @code{Message-ID} on the @code{References} header of other
+articles. This will, in effect, increase the score of all articles that
+respond to the article in the current buffer. Quite useful if you want
+to easily note when people answer what you've said.
-Gnus will try to decay scores once a day. If you haven't run Gnus for
-four days, Gnus will decay the scores four times, for instance.
+@table @code
+@item gnus-score-followup-article
+@findex gnus-score-followup-article
+This will add a score to articles that directly follow up your own
+article.
-@node Various
-@chapter Various
+@item gnus-score-followup-thread
+@findex gnus-score-followup-thread
+This will add a score to all articles that appear in a thread ``below''
+your own article.
+@end table
-@menu
-* Process/Prefix:: A convention used by many treatment commands.
-* Interactive:: Making Gnus ask you many questions.
-* Symbolic Prefixes:: How to supply some Gnus functions with options.
-* Formatting Variables:: You can specify what buffers should look like.
-* Windows Configuration:: Configuring the Gnus buffer windows.
-* Faces and Fonts:: How to change how faces look.
-* Compilation:: How to speed Gnus up.
-* Mode Lines:: Displaying information in the mode lines.
-* Highlighting and Menus:: Making buffers look all nice and cozy.
-* Buttons:: Get tendonitis in ten easy steps!
-* Daemons:: Gnus can do things behind your back.
-* NoCeM:: How to avoid spam and other fatty foods.
-* Undo:: Some actions can be undone.
-* Moderation:: What to do if you're a moderator.
-* XEmacs Enhancements:: There are more pictures and stuff under XEmacs.
-* Fuzzy Matching:: What's the big fuzz?
-* Thwarting Email Spam:: A how-to on avoiding unsolicited commercial email.
-* Various Various:: Things that are really various.
-@end menu
+@vindex message-sent-hook
+These two functions are both primarily meant to be used in hooks like
+@code{message-sent-hook}, like this:
+@lisp
+(add-hook 'message-sent-hook 'gnus-score-followup-thread)
+@end lisp
-@node Process/Prefix
-@section Process/Prefix
-@cindex process/prefix convention
+If you look closely at your own @code{Message-ID}, you'll notice that
+the first two or three characters are always the same. Here's two of
+mine:
-Many functions, among them functions for moving, decoding and saving
-articles, use what is known as the @dfn{Process/Prefix convention}.
+@example
+<x6u3u47icf.fsf@@eyesore.no>
+<x6sp9o7ibw.fsf@@eyesore.no>
+@end example
-This is a method for figuring out what articles the user wants the
-command to be performed on.
+So ``my'' ident on this machine is @samp{x6}. This can be
+exploited---the following rule will raise the score on all followups to
+myself:
-It goes like this:
+@lisp
+("references"
+ ("<x6[0-9a-z]+\\.fsf\\(_-_\\)?@@.*eyesore\\.no>"
+ 1000 nil r))
+@end lisp
-If the numeric prefix is N, perform the operation on the next N
-articles, starting with the current one. If the numeric prefix is
-negative, perform the operation on the previous N articles, starting
-with the current one.
+Whether it's the first two or first three characters that are ``yours''
+is system-dependent.
-@vindex transient-mark-mode
-If @code{transient-mark-mode} in non-@code{nil} and the region is
-active, all articles in the region will be worked upon.
-If there is no numeric prefix, but some articles are marked with the
-process mark, perform the operation on the articles marked with
-the process mark.
+@node Scoring On Other Headers
+@section Scoring On Other Headers
+@cindex scoring on other headers
-If there is neither a numeric prefix nor any articles marked with the
-process mark, just perform the operation on the current article.
+Gnus is quite fast when scoring the ``traditional''
+headers---@samp{From}, @samp{Subject} and so on. However, scoring
+other headers requires writing a @code{head} scoring rule, which means
+that Gnus has to request every single article from the back end to find
+matches. This takes a long time in big groups.
-Quite simple, really, but it needs to be made clear so that surprises
-are avoided.
+Now, there's not much you can do about this for news groups, but for
+mail groups, you have greater control. In the @pxref{To From
+Newsgroups} section of the manual, it's explained in greater detail what
+this mechanism does, but here's a cookbook example for @code{nnml} on
+how to allow scoring on the @samp{To} and @samp{Cc} headers.
-Commands that react to the process mark will push the current list of
-process marked articles onto a stack and will then clear all process
-marked articles. You can restore the previous configuration with the
-@kbd{M P y} command (@pxref{Setting Process Marks}).
+Put the following in your @file{.gnus.el} file.
-@vindex gnus-summary-goto-unread
-One thing that seems to shock & horrify lots of people is that, for
-instance, @kbd{3 d} does exactly the same as @kbd{d} @kbd{d} @kbd{d}.
-Since each @kbd{d} (which marks the current article as read) by default
-goes to the next unread article after marking, this means that @kbd{3 d}
-will mark the next three unread articles as read, no matter what the
-summary buffer looks like. Set @code{gnus-summary-goto-unread} to
-@code{nil} for a more straightforward action.
+@lisp
+(setq gnus-extra-headers '(To Cc Newsgroups Keywords)
+ nnmail-extra-headers gnus-extra-headers)
+@end lisp
+Restart Gnus and rebuild your @code{nnml} overview files with the
+@kbd{M-x nnml-generate-nov-databases} command. This will take a long
+time if you have much mail.
-@node Interactive
-@section Interactive
-@cindex interaction
+Now you can score on @samp{To} and @samp{Cc} as ``extra headers'' like
+so: @kbd{I e s p To RET <your name> RET}.
-@table @code
+See? Simple.
-@item gnus-novice-user
-@vindex gnus-novice-user
-If this variable is non-@code{nil}, you are either a newcomer to the
-World of Usenet, or you are very cautious, which is a nice thing to be,
-really. You will be given questions of the type ``Are you sure you want
-to do this?'' before doing anything dangerous. This is @code{t} by
-default.
-@item gnus-expert-user
-@vindex gnus-expert-user
-If this variable is non-@code{nil}, you will seldom be asked any
-questions by Gnus. It will simply assume you know what you're doing, no
-matter how strange.
+@node Scoring Tips
+@section Scoring Tips
+@cindex scoring tips
-@item gnus-interactive-catchup
-@vindex gnus-interactive-catchup
-Require confirmation before catching up a group if non-@code{nil}. It
-is @code{t} by default.
+@table @dfn
-@item gnus-interactive-exit
-@vindex gnus-interactive-exit
-Require confirmation before exiting Gnus. This variable is @code{t} by
-default.
-@end table
+@item Crossposts
+@cindex crossposts
+@cindex scoring crossposts
+If you want to lower the score of crossposts, the line to match on is
+the @code{Xref} header.
+@lisp
+("xref" (" talk.politics.misc:" -1000))
+@end lisp
+@item Multiple crossposts
+If you want to lower the score of articles that have been crossposted to
+more than, say, 3 groups:
+@lisp
+("xref"
+ ("[^:\n]+:[0-9]+ +[^:\n]+:[0-9]+ +[^:\n]+:[0-9]+"
+ -1000 nil r))
+@end lisp
-@node Symbolic Prefixes
-@section Symbolic Prefixes
-@cindex symbolic prefixes
+@item Matching on the body
+This is generally not a very good idea---it takes a very long time.
+Gnus actually has to fetch each individual article from the server. But
+you might want to anyway, I guess. Even though there are three match
+keys (@code{Head}, @code{Body} and @code{All}), you should choose one
+and stick with it in each score file. If you use any two, each article
+will be fetched @emph{twice}. If you want to match a bit on the
+@code{Head} and a bit on the @code{Body}, just use @code{All} for all
+the matches.
-Quite a lot of Emacs commands react to the (numeric) prefix. For
-instance, @kbd{C-u 4 C-f} moves point four characters forward, and
-@kbd{C-u 9 0 0 I s s p} adds a permanent @code{Subject} substring score
-rule of 900 to the current article.
+@item Marking as read
+You will probably want to mark articles that have scores below a certain
+number as read. This is most easily achieved by putting the following
+in your @file{all.SCORE} file:
+@lisp
+((mark -100))
+@end lisp
+You may also consider doing something similar with @code{expunge}.
-This is all nice and well, but what if you want to give a command some
-additional information? Well, what most commands do is interpret the
-``raw'' prefix in some special way. @kbd{C-u 0 C-x C-s} means that one
-doesn't want a backup file to be created when saving the current buffer,
-for instance. But what if you want to save without making a backup
-file, and you want Emacs to flash lights and play a nice tune at the
-same time? You can't, and you're probably perfectly happy that way.
+@item Negated character classes
+If you say stuff like @code{[^abcd]*}, you may get unexpected results.
+That will match newlines, which might lead to, well, The Unknown. Say
+@code{[^abcd\n]*} instead.
+@end table
-@kindex M-i (Summary)
-@findex gnus-symbolic-argument
-I'm not, so I've added a second prefix---the @dfn{symbolic prefix}. The
-prefix key is @kbd{M-i} (@code{gnus-symbolic-argument}), and the next
-character typed in is the value. You can stack as many @kbd{M-i}
-prefixes as you want. @kbd{M-i a M-C-u} means ``feed the @kbd{M-C-u}
-command the symbolic prefix @code{a}''. @kbd{M-i a M-i b M-C-u} means
-``feed the @kbd{M-C-u} command the symbolic prefixes @code{a} and
-@code{b}''. You get the drift.
-Typing in symbolic prefixes to commands that don't accept them doesn't
-hurt, but it doesn't do any good either. Currently not many Gnus
-functions make use of the symbolic prefix.
+@node Reverse Scoring
+@section Reverse Scoring
+@cindex reverse scoring
-If you're interested in how Gnus implements this, @pxref{Extended
-Interactive}.
+If you want to keep just articles that have @samp{Sex with Emacs} in the
+subject header, and expunge all other articles, you could put something
+like this in your score file:
+@lisp
+(("subject"
+ ("Sex with Emacs" 2))
+ (mark 1)
+ (expunge 1))
+@end lisp
-@node Formatting Variables
-@section Formatting Variables
-@cindex formatting variables
+So, you raise all articles that match @samp{Sex with Emacs} and mark the
+rest as read, and expunge them to boot.
-Throughout this manual you've probably noticed lots of variables called
-things like @code{gnus-group-line-format} and
-@code{gnus-summary-mode-line-format}. These control how Gnus is to
-output lines in the various buffers. There's quite a lot of them.
-Fortunately, they all use the same syntax, so there's not that much to
-be annoyed by.
-Here's an example format spec (from the group buffer): @samp{%M%S%5y:
-%(%g%)\n}. We see that it is indeed extremely ugly, and that there are
-lots of percentages everywhere.
+@node Global Score Files
+@section Global Score Files
+@cindex global score files
-@menu
-* Formatting Basics:: A formatting variable is basically a format string.
-* Mode Line Formatting:: Some rules about mode line formatting variables.
-* Advanced Formatting:: Modifying output in various ways.
-* User-Defined Specs:: Having Gnus call your own functions.
-* Formatting Fonts:: Making the formatting look colorful and nice.
-@end menu
+Sure, other newsreaders have ``global kill files''. These are usually
+nothing more than a single kill file that applies to all groups, stored
+in the user's home directory. Bah! Puny, weak newsreaders!
-Currently Gnus uses the following formatting variables:
-@code{gnus-group-line-format}, @code{gnus-summary-line-format},
-@code{gnus-server-line-format}, @code{gnus-topic-line-format},
-@code{gnus-group-mode-line-format},
-@code{gnus-summary-mode-line-format},
-@code{gnus-article-mode-line-format},
-@code{gnus-server-mode-line-format}, and
-@code{gnus-summary-pick-line-format}.
+What I'm talking about here are Global Score Files. Score files from
+all over the world, from users everywhere, uniting all nations in one
+big, happy score file union! Ange-score! New and untested!
-All these format variables can also be arbitrary elisp forms. In that
-case, they will be @code{eval}ed to insert the required lines.
+@vindex gnus-global-score-files
+All you have to do to use other people's score files is to set the
+@code{gnus-global-score-files} variable. One entry for each score file,
+or each score file directory. Gnus will decide by itself what score
+files are applicable to which group.
-@kindex M-x gnus-update-format
-@findex gnus-update-format
-Gnus includes a command to help you while creating your own format
-specs. @kbd{M-x gnus-update-format} will @code{eval} the current form,
-update the spec in question and pop you to a buffer where you can
-examine the resulting lisp code to be run to generate the line.
-
-
-
-@node Formatting Basics
-@subsection Formatting Basics
-
-Each @samp{%} element will be replaced by some string or other when the
-buffer in question is generated. @samp{%5y} means ``insert the @samp{y}
-spec, and pad with spaces to get a 5-character field''.
+To use the score file
+@file{/ftp@@ftp.gnus.org:/pub/larsi/ding/score/soc.motss.SCORE} and
+all score files in the @file{/ftp@@ftp.some-where:/pub/score} directory,
+say this:
-As with normal C and Emacs Lisp formatting strings, the numerical
-modifier between the @samp{%} and the formatting type character will
-@dfn{pad} the output so that it is always at least that long.
-@samp{%5y} will make the field always (at least) five characters wide by
-padding with spaces to the left. If you say @samp{%-5y}, it will pad to
-the right instead.
+@lisp
+(setq gnus-global-score-files
+ '("/ftp@@ftp.gnus.org:/pub/larsi/ding/score/soc.motss.SCORE"
+ "/ftp@@ftp.some-where:/pub/score/"))
+@end lisp
-You may also wish to limit the length of the field to protect against
-particularly wide values. For that you can say @samp{%4,6y}, which
-means that the field will never be more than 6 characters wide and never
-less than 4 characters wide.
+@findex gnus-score-search-global-directories
+@noindent
+Simple, eh? Directory names must end with a @samp{/}. These
+directories are typically scanned only once during each Gnus session.
+If you feel the need to manually re-scan the remote directories, you can
+use the @code{gnus-score-search-global-directories} command.
+Note that, at present, using this option will slow down group entry
+somewhat. (That is---a lot.)
-@node Mode Line Formatting
-@subsection Mode Line Formatting
+If you want to start maintaining score files for other people to use,
+just put your score file up for anonymous ftp and announce it to the
+world. Become a retro-moderator! Participate in the retro-moderator
+wars sure to ensue, where retro-moderators battle it out for the
+sympathy of the people, luring them to use their score files on false
+premises! Yay! The net is saved!
-Mode line formatting variables (e.g.,
-@code{gnus-summary-mode-line-format}) follow the same rules as other,
-buffer line oriented formatting variables (@pxref{Formatting Basics})
-with the following two differences:
+Here are some tips for the would-be retro-moderator, off the top of my
+head:
-@enumerate
+@itemize @bullet
@item
-There must be no newline (@samp{\n}) at the end.
+Articles heavily crossposted are probably junk.
+@item
+To lower a single inappropriate article, lower by @code{Message-ID}.
+@item
+Particularly brilliant authors can be raised on a permanent basis.
+@item
+Authors that repeatedly post off-charter for the group can safely be
+lowered out of existence.
+@item
+Set the @code{mark} and @code{expunge} atoms to obliterate the nastiest
+articles completely.
@item
-The special @samp{%%b} spec can be used to display the buffer name.
-Well, it's no spec at all, really---@samp{%%} is just a way to quote
-@samp{%} to allow it to pass through the formatting machinery unmangled,
-so that Emacs receives @samp{%b}, which is something the Emacs mode line
-display interprets to mean ``show the buffer name''. For a full list of
-mode line specs Emacs understands, see the documentation of the
-@code{mode-line-format} variable.
+Use expiring score entries to keep the size of the file down. You
+should probably have a long expiry period, though, as some sites keep
+old articles for a long time.
+@end itemize
-@end enumerate
+... I wonder whether other newsreaders will support global score files
+in the future. @emph{Snicker}. Yup, any day now, newsreaders like Blue
+Wave, xrn and 1stReader are bound to implement scoring. Should we start
+holding our breath yet?
-@node Advanced Formatting
-@subsection Advanced Formatting
+@node Kill Files
+@section Kill Files
+@cindex kill files
-It is frequently useful to post-process the fields in some way.
-Padding, limiting, cutting off parts and suppressing certain values can
-be achieved by using @dfn{tilde modifiers}. A typical tilde spec might
-look like @samp{%~(cut 3)~(ignore "0")y}.
+Gnus still supports those pesky old kill files. In fact, the kill file
+entries can now be expiring, which is something I wrote before Daniel
+Quinlan thought of doing score files, so I've left the code in there.
-These are the valid modifiers:
+In short, kill processing is a lot slower (and I do mean @emph{a lot})
+than score processing, so it might be a good idea to rewrite your kill
+files into score files.
-@table @code
-@item pad
-@itemx pad-left
-Pad the field to the left with spaces until it reaches the required
-length.
+Anyway, a kill file is a normal @code{emacs-lisp} file. You can put any
+forms into this file, which means that you can use kill files as some
+sort of primitive hook function to be run on group entry, even though
+that isn't a very good idea.
-@item pad-right
-Pad the field to the right with spaces until it reaches the required
-length.
+Normal kill files look like this:
-@item max
-@itemx max-left
-Cut off characters from the left until it reaches the specified length.
+@lisp
+(gnus-kill "From" "Lars Ingebrigtsen")
+(gnus-kill "Subject" "ding")
+(gnus-expunge "X")
+@end lisp
-@item max-right
-Cut off characters from the right until it reaches the specified
-length.
+This will mark every article written by me as read, and remove the
+marked articles from the summary buffer. Very useful, you'll agree.
-@item cut
-@itemx cut-left
-Cut off the specified number of characters from the left.
+Other programs use a totally different kill file syntax. If Gnus
+encounters what looks like a @code{rn} kill file, it will take a stab at
+interpreting it.
-@item cut-right
-Cut off the specified number of characters from the right.
+Two summary functions for editing a GNUS kill file:
-@item ignore
-Return an empty string if the field is equal to the specified value.
+@table @kbd
-@item form
-Use the specified form as the field value when the @samp{@@} spec is
-used.
+@item M-k
+@kindex M-k (Summary)
+@findex gnus-summary-edit-local-kill
+Edit this group's kill file (@code{gnus-summary-edit-local-kill}).
+
+@item M-K
+@kindex M-K (Summary)
+@findex gnus-summary-edit-global-kill
+Edit the general kill file (@code{gnus-summary-edit-global-kill}).
@end table
-Let's take an example. The @samp{%o} spec in the summary mode lines
-will return a date in compact ISO8601 format---@samp{19960809T230410}.
-This is quite a mouthful, so we want to shave off the century number and
-the time, leaving us with a six-character date. That would be
-@samp{%~(cut-left 2)~(max-right 6)~(pad 6)o}. (Cutting is done before
-maxing, and we need the padding to ensure that the date is never less
-than 6 characters to make it look nice in columns.)
+Two group mode functions for editing the kill files:
-Ignoring is done first; then cutting; then maxing; and then as the very
-last operation, padding.
+@table @kbd
-If you use lots of these advanced thingies, you'll find that Gnus gets
-quite slow. This can be helped enormously by running @kbd{M-x
-gnus-compile} when you are satisfied with the look of your lines.
-@xref{Compilation}.
+@item M-k
+@kindex M-k (Group)
+@findex gnus-group-edit-local-kill
+Edit this group's kill file (@code{gnus-group-edit-local-kill}).
+@item M-K
+@kindex M-K (Group)
+@findex gnus-group-edit-global-kill
+Edit the general kill file (@code{gnus-group-edit-global-kill}).
+@end table
-@node User-Defined Specs
-@subsection User-Defined Specs
+Kill file variables:
-All the specs allow for inserting user defined specifiers---@samp{u}.
-The next character in the format string should be a letter. Gnus
-will call the function @code{gnus-user-format-function-}@samp{X}, where
-@samp{X} is the letter following @samp{%u}. The function will be passed
-a single parameter---what the parameter means depends on what buffer
-it's being called from. The function should return a string, which will
-be inserted into the buffer just like information from any other
-specifier. This function may also be called with dummy values, so it
-should protect against that.
+@table @code
+@item gnus-kill-file-name
+@vindex gnus-kill-file-name
+A kill file for the group @samp{soc.motss} is normally called
+@file{soc.motss.KILL}. The suffix appended to the group name to get
+this file name is detailed by the @code{gnus-kill-file-name} variable.
+The ``global'' kill file (not in the score file sense of ``global'', of
+course) is just called @file{KILL}.
-You can also use tilde modifiers (@pxref{Advanced Formatting} to achieve
-much the same without defining new functions. Here's an example:
-@samp{%~(form (count-lines (point-min) (point)))@@}. The form
-given here will be evaluated to yield the current line number, and then
-inserted.
+@vindex gnus-kill-save-kill-file
+@item gnus-kill-save-kill-file
+If this variable is non-@code{nil}, Gnus will save the
+kill file after processing, which is necessary if you use expiring
+kills.
+@item gnus-apply-kill-hook
+@vindex gnus-apply-kill-hook
+@findex gnus-apply-kill-file-unless-scored
+@findex gnus-apply-kill-file
+A hook called to apply kill files to a group. It is
+@code{(gnus-apply-kill-file)} by default. If you want to ignore the
+kill file if you have a score file for the same group, you can set this
+hook to @code{(gnus-apply-kill-file-unless-scored)}. If you don't want
+kill files to be processed, you should set this variable to @code{nil}.
-@node Formatting Fonts
-@subsection Formatting Fonts
+@item gnus-kill-file-mode-hook
+@vindex gnus-kill-file-mode-hook
+A hook called in kill-file mode buffers.
-There are specs for highlighting, and these are shared by all the format
-variables. Text inside the @samp{%(} and @samp{%)} specifiers will get
-the special @code{mouse-face} property set, which means that it will be
-highlighted (with @code{gnus-mouse-face}) when you put the mouse pointer
-over it.
+@end table
-Text inside the @samp{%@{} and @samp{%@}} specifiers will have their
-normal faces set using @code{gnus-face-0}, which is @code{bold} by
-default. If you say @samp{%1@{}, you'll get @code{gnus-face-1} instead,
-and so on. Create as many faces as you wish. The same goes for the
-@code{mouse-face} specs---you can say @samp{%3(hello%)} to have
-@samp{hello} mouse-highlighted with @code{gnus-mouse-face-3}.
-Text inside the @samp{%<} and @samp{%>} specifiers will get the special
-@code{balloon-help} property set to @code{gnus-balloon-face-0}. If you say
-@samp{%1<}, you'll get @code{gnus-balloon-face-1} and so on. The
-@code{gnus-balloon-face-*} variables should be either strings or
-symbols naming functions that return a string. Under @code{balloon-help-mode},
-when the mouse passes over text with this property set, a balloon window
-will appear and display the string. Please refer to the doc string of
-@code{balloon-help-mode} for more information on this.
+@node Converting Kill Files
+@section Converting Kill Files
+@cindex kill files
+@cindex converting kill files
-Here's an alternative recipe for the group buffer:
+If you have loads of old kill files, you may want to convert them into
+score files. If they are ``regular'', you can use
+the @file{gnus-kill-to-score.el} package; if not, you'll have to do it
+by hand.
-@lisp
-;; Create three face types.
-(setq gnus-face-1 'bold)
-(setq gnus-face-3 'italic)
+The kill to score conversion package isn't included in Gnus by default.
+You can fetch it from
+@uref{http://www.stud.ifi.uio.no/~larsi/ding-various/gnus-kill-to-score.el}.
-;; We want the article count to be in
-;; a bold and green face. So we create
-;; a new face called `my-green-bold'.
-(copy-face 'bold 'my-green-bold)
-;; Set the color.
-(set-face-foreground 'my-green-bold "ForestGreen")
-(setq gnus-face-2 'my-green-bold)
+If your old kill files are very complex---if they contain more
+non-@code{gnus-kill} forms than not, you'll have to convert them by
+hand. Or just let them be as they are. Gnus will still use them as
+before.
-;; Set the new & fancy format.
-(setq gnus-group-line-format
- "%M%S%3@{%5y%@}%2[:%] %(%1@{%g%@}%)\n")
-@end lisp
-I'm sure you'll be able to use this scheme to create totally unreadable
-and extremely vulgar displays. Have fun!
+@node GroupLens
+@section GroupLens
+@cindex GroupLens
-Note that the @samp{%(} specs (and friends) do not make any sense on the
-mode-line variables.
+GroupLens (@uref{http://www.cs.umn.edu/Research/GroupLens/}) is a
+collaborative filtering system that helps you work together with other
+people to find the quality news articles out of the huge volume of
+news articles generated every day.
+To accomplish this the GroupLens system combines your opinions about
+articles you have already read with the opinions of others who have done
+likewise and gives you a personalized prediction for each unread news
+article. Think of GroupLens as a matchmaker. GroupLens watches how you
+rate articles, and finds other people that rate articles the same way.
+Once it has found some people you agree with it tells you, in the form
+of a prediction, what they thought of the article. You can use this
+prediction to help you decide whether or not you want to read the
+article.
-@node Windows Configuration
-@section Windows Configuration
-@cindex windows configuration
+@sc{Note:} Unfortunately the GroupLens system seems to have shut down,
+so this section is mostly of historical interest.
-No, there's nothing here about X, so be quiet.
+@menu
+* Using GroupLens:: How to make Gnus use GroupLens.
+* Rating Articles:: Letting GroupLens know how you rate articles.
+* Displaying Predictions:: Displaying predictions given by GroupLens.
+* GroupLens Variables:: Customizing GroupLens.
+@end menu
-@vindex gnus-use-full-window
-If @code{gnus-use-full-window} non-@code{nil}, Gnus will delete all
-other windows and occupy the entire Emacs screen by itself. It is
-@code{t} by default.
-Setting this variable to @code{nil} kinda works, but there are
-glitches. Use at your own peril.
+@node Using GroupLens
+@subsection Using GroupLens
-@vindex gnus-buffer-configuration
-@code{gnus-buffer-configuration} describes how much space each Gnus
-buffer should be given. Here's an excerpt of this variable:
+To use GroupLens you must register a pseudonym with your local Better
+Bit Bureau (BBB).
+@uref{http://www.cs.umn.edu/Research/GroupLens/bbb.html} is the only
+better bit in town at the moment.
-@lisp
-((group (vertical 1.0 (group 1.0 point)
- (if gnus-carpal (group-carpal 4))))
- (article (vertical 1.0 (summary 0.25 point)
- (article 1.0))))
-@end lisp
+Once you have registered you'll need to set a couple of variables.
-This is an alist. The @dfn{key} is a symbol that names some action or
-other. For instance, when displaying the group buffer, the window
-configuration function will use @code{group} as the key. A full list of
-possible names is listed below.
+@table @code
-The @dfn{value} (i.e., the @dfn{split}) says how much space each buffer
-should occupy. To take the @code{article} split as an example -
+@item gnus-use-grouplens
+@vindex gnus-use-grouplens
+Setting this variable to a non-@code{nil} value will make Gnus hook into
+all the relevant GroupLens functions.
-@lisp
-(article (vertical 1.0 (summary 0.25 point)
- (article 1.0)))
-@end lisp
+@item grouplens-pseudonym
+@vindex grouplens-pseudonym
+This variable should be set to the pseudonym you got when registering
+with the Better Bit Bureau.
-This @dfn{split} says that the summary buffer should occupy 25% of upper
-half of the screen, and that it is placed over the article buffer. As
-you may have noticed, 100% + 25% is actually 125% (yup, I saw y'all
-reaching for that calculator there). However, the special number
-@code{1.0} is used to signal that this buffer should soak up all the
-rest of the space available after the rest of the buffers have taken
-whatever they need. There should be only one buffer with the @code{1.0}
-size spec per split.
+@item grouplens-newsgroups
+@vindex grouplens-newsgroups
+A list of groups that you want to get GroupLens predictions for.
-Point will be put in the buffer that has the optional third element
-@code{point}. In a @code{frame} split, the last subsplit having a leaf
-split where the tag @code{frame-focus} is a member (i.e. is the third or
-fourth element in the list, depending on whether the @code{point} tag is
-present) gets focus.
+@end table
-Here's a more complicated example:
+That's the minimum of what you need to get up and running with GroupLens.
+Once you've registered, GroupLens will start giving you scores for
+articles based on the average of what other people think. But, to get
+the real benefit of GroupLens you need to start rating articles
+yourself. Then the scores GroupLens gives you will be personalized for
+you, based on how the people you usually agree with have already rated.
-@lisp
-(article (vertical 1.0 (group 4)
- (summary 0.25 point)
- (if gnus-carpal (summary-carpal 4))
- (article 1.0)))
-@end lisp
-If the size spec is an integer instead of a floating point number,
-then that number will be used to say how many lines a buffer should
-occupy, not a percentage.
+@node Rating Articles
+@subsection Rating Articles
-If the @dfn{split} looks like something that can be @code{eval}ed (to be
-precise---if the @code{car} of the split is a function or a subr), this
-split will be @code{eval}ed. If the result is non-@code{nil}, it will
-be used as a split. This means that there will be three buffers if
-@code{gnus-carpal} is @code{nil}, and four buffers if @code{gnus-carpal}
-is non-@code{nil}.
+In GroupLens, an article is rated on a scale from 1 to 5, inclusive.
+Where 1 means something like this article is a waste of bandwidth and 5
+means that the article was really good. The basic question to ask
+yourself is, "on a scale from 1 to 5 would I like to see more articles
+like this one?"
-Not complicated enough for you? Well, try this on for size:
+There are four ways to enter a rating for an article in GroupLens.
-@lisp
-(article (horizontal 1.0
- (vertical 0.5
- (group 1.0)
- (gnus-carpal 4))
- (vertical 1.0
- (summary 0.25 point)
- (summary-carpal 4)
- (article 1.0))))
-@end lisp
+@table @kbd
-Whoops. Two buffers with the mystery 100% tag. And what's that
-@code{horizontal} thingie?
+@item r
+@kindex r (GroupLens)
+@findex bbb-summary-rate-article
+This function will prompt you for a rating on a scale of one to five.
-If the first element in one of the split is @code{horizontal}, Gnus will
-split the window horizontally, giving you two windows side-by-side.
-Inside each of these strips you may carry on all you like in the normal
-fashion. The number following @code{horizontal} says what percentage of
-the screen is to be given to this strip.
+@item k
+@kindex k (GroupLens)
+@findex grouplens-score-thread
+This function will prompt you for a rating, and rate all the articles in
+the thread. This is really useful for some of those long running giant
+threads in rec.humor.
-For each split, there @emph{must} be one element that has the 100% tag.
-The splitting is never accurate, and this buffer will eat any leftover
-lines from the splits.
+@end table
-To be slightly more formal, here's a definition of what a valid split
-may look like:
+The next two commands, @kbd{n} and @kbd{,} take a numerical prefix to be
+the score of the article you're reading.
-@example
-split = frame | horizontal | vertical | buffer | form
-frame = "(frame " size *split ")"
-horizontal = "(horizontal " size *split ")"
-vertical = "(vertical " size *split ")"
-buffer = "(" buffer-name " " size *[ "point" ] *[ "frame-focus"] ")"
-size = number | frame-params
-buffer-name = group | article | summary ...
-@end example
+@table @kbd
-The limitations are that the @code{frame} split can only appear as the
-top-level split. @var{form} should be an Emacs Lisp form that should
-return a valid split. We see that each split is fully recursive, and
-may contain any number of @code{vertical} and @code{horizontal} splits.
+@item 1-5 n
+@kindex n (GroupLens)
+@findex grouplens-next-unread-article
+Rate the article and go to the next unread article.
-@vindex gnus-window-min-width
-@vindex gnus-window-min-height
-@cindex window height
-@cindex window width
-Finding the right sizes can be a bit complicated. No window may be less
-than @code{gnus-window-min-height} (default 1) characters high, and all
-windows must be at least @code{gnus-window-min-width} (default 1)
-characters wide. Gnus will try to enforce this before applying the
-splits. If you want to use the normal Emacs window width/height limit,
-you can just set these two variables to @code{nil}.
+@item 1-5 ,
+@kindex , (GroupLens)
+@findex grouplens-best-unread-article
+Rate the article and go to the next unread article with the highest score.
-If you're not familiar with Emacs terminology, @code{horizontal} and
-@code{vertical} splits may work the opposite way of what you'd expect.
-Windows inside a @code{horizontal} split are shown side-by-side, and
-windows within a @code{vertical} split are shown above each other.
+@end table
-@findex gnus-configure-frame
-If you want to experiment with window placement, a good tip is to call
-@code{gnus-configure-frame} directly with a split. This is the function
-that does all the real work when splitting buffers. Below is a pretty
-nonsensical configuration with 5 windows; two for the group buffer and
-three for the article buffer. (I said it was nonsensical.) If you
-@code{eval} the statement below, you can get an idea of how that would
-look straight away, without going through the normal Gnus channels.
-Play with it until you're satisfied, and then use
-@code{gnus-add-configuration} to add your new creation to the buffer
-configuration list.
+If you want to give the current article a score of 4 and then go to the
+next article, just type @kbd{4 n}.
-@lisp
-(gnus-configure-frame
- '(horizontal 1.0
- (vertical 10
- (group 1.0)
- (article 0.3 point))
- (vertical 1.0
- (article 1.0)
- (horizontal 4
- (group 1.0)
- (article 10)))))
-@end lisp
-You might want to have several frames as well. No prob---just use the
-@code{frame} split:
+@node Displaying Predictions
+@subsection Displaying Predictions
-@lisp
-(gnus-configure-frame
- '(frame 1.0
- (vertical 1.0
- (summary 0.25 point frame-focus)
- (article 1.0))
- (vertical ((height . 5) (width . 15)
- (user-position . t)
- (left . -1) (top . 1))
- (picon 1.0))))
+GroupLens makes a prediction for you about how much you will like a
+news article. The predictions from GroupLens are on a scale from 1 to
+5, where 1 is the worst and 5 is the best. You can use the predictions
+from GroupLens in one of three ways controlled by the variable
+@code{gnus-grouplens-override-scoring}.
-@end lisp
+@vindex gnus-grouplens-override-scoring
+There are three ways to display predictions in grouplens. You may
+choose to have the GroupLens scores contribute to, or override the
+regular gnus scoring mechanism. override is the default; however, some
+people prefer to see the Gnus scores plus the grouplens scores. To get
+the separate scoring behavior you need to set
+@code{gnus-grouplens-override-scoring} to @code{'separate}. To have the
+GroupLens predictions combined with the grouplens scores set it to
+@code{'override} and to combine the scores set
+@code{gnus-grouplens-override-scoring} to @code{'combine}. When you use
+the combine option you will also want to set the values for
+@code{grouplens-prediction-offset} and
+@code{grouplens-score-scale-factor}.
-This split will result in the familiar summary/article window
-configuration in the first (or ``main'') frame, while a small additional
-frame will be created where picons will be shown. As you can see,
-instead of the normal @code{1.0} top-level spec, each additional split
-should have a frame parameter alist as the size spec.
-@xref{Frame Parameters, , Frame Parameters, elisp, The GNU Emacs Lisp
-Reference Manual}. Under XEmacs, a frame property list will be
-accepted, too---for instance, @code{(height 5 width 15 left -1 top 1)}
-is such a plist.
-The list of all possible keys for @code{gnus-buffer-configuration} can
-be found in its default value.
+@vindex grouplens-prediction-display
+In either case, GroupLens gives you a few choices for how you would like
+to see your predictions displayed. The display of predictions is
+controlled by the @code{grouplens-prediction-display} variable.
-Note that the @code{message} key is used for both
-@code{gnus-group-mail} and @code{gnus-summary-mail-other-window}. If
-it is desirable to distinguish between the two, something like this
-might be used:
+The following are valid values for that variable.
-@lisp
-(message (horizontal 1.0
- (vertical 1.0 (message 1.0 point))
- (vertical 0.24
- (if (buffer-live-p gnus-summary-buffer)
- '(summary 0.5))
- (group 1.0)))))
-@end lisp
+@table @code
+@item prediction-spot
+The higher the prediction, the further to the right an @samp{*} is
+displayed.
-One common desire for a multiple frame split is to have a separate frame
-for composing mail and news while leaving the original frame intact. To
-accomplish that, something like the following can be done:
+@item confidence-interval
+A numeric confidence interval.
-@lisp
-(message (frame 1.0
- (if (not (buffer-live-p gnus-summary-buffer))
- (car (cdr (assoc 'group gnus-buffer-configuration)))
- (car (cdr (assoc 'summary gnus-buffer-configuration))))
- (vertical ((user-position . t) (top . 1) (left . 1)
- (name . "Message"))
- (message 1.0 point))))
-@end lisp
+@item prediction-bar
+The higher the prediction, the longer the bar.
-@findex gnus-add-configuration
-Since the @code{gnus-buffer-configuration} variable is so long and
-complicated, there's a function you can use to ease changing the config
-of a single setting: @code{gnus-add-configuration}. If, for instance,
-you want to change the @code{article} setting, you could say:
+@item confidence-bar
+Numerical confidence.
-@lisp
-(gnus-add-configuration
- '(article (vertical 1.0
- (group 4)
- (summary .25 point)
- (article 1.0))))
-@end lisp
+@item confidence-spot
+The spot gets bigger with more confidence.
-You'd typically stick these @code{gnus-add-configuration} calls in your
-@file{.gnus.el} file or in some startup hook---they should be run after
-Gnus has been loaded.
+@item prediction-num
+Plain-old numeric value.
-@vindex gnus-always-force-window-configuration
-If all windows mentioned in the configuration are already visible, Gnus
-won't change the window configuration. If you always want to force the
-``right'' window configuration, you can set
-@code{gnus-always-force-window-configuration} to non-@code{nil}.
+@item confidence-plus-minus
+Prediction +/- confidence.
-If you're using tree displays (@pxref{Tree Display}), and the tree
-window is displayed vertically next to another window, you may also want
-to fiddle with @code{gnus-tree-minimize-window} to avoid having the
-windows resized.
+@end table
-@node Faces and Fonts
-@section Faces and Fonts
-@cindex faces
-@cindex fonts
-@cindex colors
+@node GroupLens Variables
+@subsection GroupLens Variables
-Fiddling with fonts and faces used to be very difficult, but these days
-it is very simple. You simply say @kbd{M-x customize-face}, pick out
-the face you want to alter, and alter it via the standard Customize
-interface.
+@table @code
+@item gnus-summary-grouplens-line-format
+The summary line format used in GroupLens-enhanced summary buffers. It
+accepts the same specs as the normal summary line format (@pxref{Summary
+Buffer Lines}). The default is @samp{%U%R%z%l%I%(%[%4L: %-23,23n%]%)
+%s\n}.
-@node Compilation
-@section Compilation
-@cindex compilation
-@cindex byte-compilation
+@item grouplens-bbb-host
+Host running the bbbd server. @samp{grouplens.cs.umn.edu} is the
+default.
-@findex gnus-compile
+@item grouplens-bbb-port
+Port of the host running the bbbd server. The default is 9000.
-Remember all those line format specification variables?
-@code{gnus-summary-line-format}, @code{gnus-group-line-format}, and so
-on. Now, Gnus will of course heed whatever these variables are, but,
-unfortunately, changing them will mean a quite significant slow-down.
-(The default values of these variables have byte-compiled functions
-associated with them, while the user-generated versions do not, of
-course.)
+@item grouplens-score-offset
+Offset the prediction by this value. In other words, subtract the
+prediction value by this number to arrive at the effective score. The
+default is 0.
-To help with this, you can run @kbd{M-x gnus-compile} after you've
-fiddled around with the variables and feel that you're (kind of)
-satisfied. This will result in the new specs being byte-compiled, and
-you'll get top speed again. Gnus will save these compiled specs in the
-@file{.newsrc.eld} file. (User-defined functions aren't compiled by
-this function, though---you should compile them yourself by sticking
-them into the @code{.gnus.el} file and byte-compiling that file.)
+@item grouplens-score-scale-factor
+This variable allows the user to magnify the effect of GroupLens scores.
+The scale factor is applied after the offset. The default is 1.
+@end table
-@node Mode Lines
-@section Mode Lines
-@cindex mode lines
-@vindex gnus-updated-mode-lines
-@code{gnus-updated-mode-lines} says what buffers should keep their mode
-lines updated. It is a list of symbols. Supported symbols include
-@code{group}, @code{article}, @code{summary}, @code{server},
-@code{browse}, and @code{tree}. If the corresponding symbol is present,
-Gnus will keep that mode line updated with information that may be
-pertinent. If this variable is @code{nil}, screen refresh may be
-quicker.
+@node Advanced Scoring
+@section Advanced Scoring
-@cindex display-time
+Scoring on Subjects and From headers is nice enough, but what if you're
+really interested in what a person has to say only when she's talking
+about a particular subject? Or what if you really don't want to
+read what person A has to say when she's following up to person B, but
+want to read what she says when she's following up to person C?
-@vindex gnus-mode-non-string-length
-By default, Gnus displays information on the current article in the mode
-lines of the summary and article buffers. The information Gnus wishes
-to display (e.g. the subject of the article) is often longer than the
-mode lines, and therefore have to be cut off at some point. The
-@code{gnus-mode-non-string-length} variable says how long the other
-elements on the line is (i.e., the non-info part). If you put
-additional elements on the mode line (e.g. a clock), you should modify
-this variable:
+By using advanced scoring rules you may create arbitrarily complex
+scoring patterns.
-@c Hook written by Francesco Potorti` <pot@cnuce.cnr.it>
-@lisp
-(add-hook 'display-time-hook
- (lambda () (setq gnus-mode-non-string-length
- (+ 21
- (if line-number-mode 5 0)
- (if column-number-mode 4 0)
- (length display-time-string)))))
-@end lisp
+@menu
+* Advanced Scoring Syntax:: A definition.
+* Advanced Scoring Examples:: What they look like.
+* Advanced Scoring Tips:: Getting the most out of it.
+@end menu
-If this variable is @code{nil} (which is the default), the mode line
-strings won't be chopped off, and they won't be padded either. Note
-that the default is unlikely to be desirable, as even the percentage
-complete in the buffer may be crowded off the mode line; the user should
-configure this variable appropriately for her configuration.
+@node Advanced Scoring Syntax
+@subsection Advanced Scoring Syntax
-@node Highlighting and Menus
-@section Highlighting and Menus
-@cindex visual
-@cindex highlighting
-@cindex menus
+Ordinary scoring rules have a string as the first element in the rule.
+Advanced scoring rules have a list as the first element. The second
+element is the score to be applied if the first element evaluated to a
+non-@code{nil} value.
-@vindex gnus-visual
-The @code{gnus-visual} variable controls most of the Gnus-prettifying
-aspects. If @code{nil}, Gnus won't attempt to create menus or use fancy
-colors or fonts. This will also inhibit loading the @file{gnus-vis.el}
-file.
+These lists may consist of three logical operators, one redirection
+operator, and various match operators.
-This variable can be a list of visual properties that are enabled. The
-following elements are valid, and are all included by default:
+Logical operators:
@table @code
-@item group-highlight
-Do highlights in the group buffer.
-@item summary-highlight
-Do highlights in the summary buffer.
-@item article-highlight
-Do highlights in the article buffer.
-@item highlight
-Turn on highlighting in all buffers.
-@item group-menu
-Create menus in the group buffer.
-@item summary-menu
-Create menus in the summary buffers.
-@item article-menu
-Create menus in the article buffer.
-@item browse-menu
-Create menus in the browse buffer.
-@item server-menu
-Create menus in the server buffer.
-@item score-menu
-Create menus in the score buffers.
-@item menu
-Create menus in all buffers.
-@end table
+@item &
+@itemx and
+This logical operator will evaluate each of its arguments until it finds
+one that evaluates to @code{false}, and then it'll stop. If all arguments
+evaluate to @code{true} values, then this operator will return
+@code{true}.
-So if you only want highlighting in the article buffer and menus in all
-buffers, you could say something like:
+@item |
+@itemx or
+This logical operator will evaluate each of its arguments until it finds
+one that evaluates to @code{true}. If no arguments are @code{true},
+then this operator will return @code{false}.
-@lisp
-(setq gnus-visual '(article-highlight menu))
-@end lisp
+@item !
+@itemx not
+@itemx ¬
+This logical operator only takes a single argument. It returns the
+logical negation of the value of its argument.
-If you want highlighting only and no menus whatsoever, you'd say:
+@end table
-@lisp
-(setq gnus-visual '(highlight))
-@end lisp
+There is an @dfn{indirection operator} that will make its arguments
+apply to the ancestors of the current article being scored. For
+instance, @code{1-} will make score rules apply to the parent of the
+current article. @code{2-} will make score rules apply to the
+grandparent of the current article. Alternatively, you can write
+@code{^^}, where the number of @code{^}s (carets) says how far back into
+the ancestry you want to go.
-If @code{gnus-visual} is @code{t}, highlighting and menus will be used
-in all Gnus buffers.
+Finally, we have the match operators. These are the ones that do the
+real work. Match operators are header name strings followed by a match
+and a match type. A typical match operator looks like @samp{("from"
+"Lars Ingebrigtsen" s)}. The header names are the same as when using
+simple scoring, and the match types are also the same.
-Other general variables that influence the look of all buffers include:
-@table @code
-@item gnus-mouse-face
-@vindex gnus-mouse-face
-This is the face (i.e., font) used for mouse highlighting in Gnus. No
-mouse highlights will be done if @code{gnus-visual} is @code{nil}.
+@node Advanced Scoring Examples
+@subsection Advanced Scoring Examples
-@end table
+Please note that the following examples are score file rules. To
+make a complete score file from them, surround them with another pair
+of parentheses.
-There are hooks associated with the creation of all the different menus:
+Let's say you want to increase the score of articles written by Lars
+when he's talking about Gnus:
-@table @code
+@example
+((&
+ ("from" "Lars Ingebrigtsen")
+ ("subject" "Gnus"))
+ 1000)
+@end example
-@item gnus-article-menu-hook
-@vindex gnus-article-menu-hook
-Hook called after creating the article mode menu.
+Quite simple, huh?
-@item gnus-group-menu-hook
-@vindex gnus-group-menu-hook
-Hook called after creating the group mode menu.
+When he writes long articles, he sometimes has something nice to say:
-@item gnus-summary-menu-hook
-@vindex gnus-summary-menu-hook
-Hook called after creating the summary mode menu.
+@example
+((&
+ ("from" "Lars Ingebrigtsen")
+ (|
+ ("subject" "Gnus")
+ ("lines" 100 >)))
+ 1000)
+@end example
-@item gnus-server-menu-hook
-@vindex gnus-server-menu-hook
-Hook called after creating the server mode menu.
+However, when he responds to things written by Reig Eigil Logge, you
+really don't want to read what he's written:
-@item gnus-browse-menu-hook
-@vindex gnus-browse-menu-hook
-Hook called after creating the browse mode menu.
+@example
+((&
+ ("from" "Lars Ingebrigtsen")
+ (1- ("from" "Reig Eigir Logge")))
+ -100000)
+@end example
-@item gnus-score-menu-hook
-@vindex gnus-score-menu-hook
-Hook called after creating the score mode menu.
+Everybody that follows up Redmondo when he writes about disappearing
+socks should have their scores raised, but only when they talk about
+white socks. However, when Lars talks about socks, it's usually not
+very interesting:
-@end table
+@example
+((&
+ (1-
+ (&
+ ("from" "redmondo@@.*no" r)
+ ("body" "disappearing.*socks" t)))
+ (! ("from" "Lars Ingebrigtsen"))
+ ("body" "white.*socks"))
+ 1000)
+@end example
+The possibilities are endless.
-@node Buttons
-@section Buttons
-@cindex buttons
-@cindex mouse
-@cindex click
-Those new-fangled @dfn{mouse} contraptions is very popular with the
-young, hep kids who don't want to learn the proper way to do things
-these days. Why, I remember way back in the summer of '89, when I was
-using Emacs on a Tops 20 system. Three hundred users on one single
-machine, and every user was running Simula compilers. Bah!
+@node Advanced Scoring Tips
+@subsection Advanced Scoring Tips
-Right.
+The @code{&} and @code{|} logical operators do short-circuit logic.
+That is, they stop processing their arguments when it's clear what the
+result of the operation will be. For instance, if one of the arguments
+of an @code{&} evaluates to @code{false}, there's no point in evaluating
+the rest of the arguments. This means that you should put slow matches
+(@samp{body}, @samp{header}) last and quick matches (@samp{from},
+@samp{subject}) first.
-@vindex gnus-carpal
-Well, you can make Gnus display bufferfuls of buttons you can click to
-do anything by setting @code{gnus-carpal} to @code{t}. Pretty simple,
-really. Tell the chiropractor I sent you.
+The indirection arguments (@code{1-} and so on) will make their
+arguments work on previous generations of the thread. If you say
+something like:
+@example
+...
+(1-
+ (1-
+ ("from" "lars")))
+...
+@end example
-@table @code
+Then that means "score on the from header of the grandparent of the
+current article". An indirection is quite fast, but it's better to say:
-@item gnus-carpal-mode-hook
-@vindex gnus-carpal-mode-hook
-Hook run in all carpal mode buffers.
+@example
+(1-
+ (&
+ ("from" "Lars")
+ ("subject" "Gnus")))
+@end example
-@item gnus-carpal-button-face
-@vindex gnus-carpal-button-face
-Face used on buttons.
+than it is to say:
-@item gnus-carpal-header-face
-@vindex gnus-carpal-header-face
-Face used on carpal buffer headers.
+@example
+(&
+ (1- ("from" "Lars"))
+ (1- ("subject" "Gnus")))
+@end example
-@item gnus-carpal-group-buffer-buttons
-@vindex gnus-carpal-group-buffer-buttons
-Buttons in the group buffer.
-@item gnus-carpal-summary-buffer-buttons
-@vindex gnus-carpal-summary-buffer-buttons
-Buttons in the summary buffer.
+@node Score Decays
+@section Score Decays
+@cindex score decays
+@cindex decays
-@item gnus-carpal-server-buffer-buttons
-@vindex gnus-carpal-server-buffer-buttons
-Buttons in the server buffer.
+You may find that your scores have a tendency to grow without
+bounds, especially if you're using adaptive scoring. If scores get too
+big, they lose all meaning---they simply max out and it's difficult to
+use them in any sensible way.
-@item gnus-carpal-browse-buffer-buttons
-@vindex gnus-carpal-browse-buffer-buttons
-Buttons in the browse buffer.
-@end table
+@vindex gnus-decay-scores
+@findex gnus-decay-score
+@vindex gnus-decay-score-function
+Gnus provides a mechanism for decaying scores to help with this problem.
+When score files are loaded and @code{gnus-decay-scores} is
+non-@code{nil}, Gnus will run the score files through the decaying
+mechanism thereby lowering the scores of all non-permanent score rules.
+The decay itself if performed by the @code{gnus-decay-score-function}
+function, which is @code{gnus-decay-score} by default. Here's the
+definition of that function:
-All the @code{buttons} variables are lists. The elements in these list
-are either cons cells where the @code{car} contains a text to be displayed and
-the @code{cdr} contains a function symbol, or a simple string.
+@lisp
+(defun gnus-decay-score (score)
+ "Decay SCORE.
+This is done according to `gnus-score-decay-constant'
+and `gnus-score-decay-scale'."
+ (floor
+ (- score
+ (* (if (< score 0) 1 -1)
+ (min (abs score)
+ (max gnus-score-decay-constant
+ (* (abs score)
+ gnus-score-decay-scale)))))))
+@end lisp
+@vindex gnus-score-decay-scale
+@vindex gnus-score-decay-constant
+@code{gnus-score-decay-constant} is 3 by default and
+@code{gnus-score-decay-scale} is 0.05. This should cause the following:
-@node Daemons
-@section Daemons
-@cindex demons
-@cindex daemons
+@enumerate
+@item
+Scores between -3 and 3 will be set to 0 when this function is called.
-Gnus, being larger than any program ever written (allegedly), does lots
-of strange stuff that you may wish to have done while you're not
-present. For instance, you may want it to check for new mail once in a
-while. Or you may want it to close down all connections to all servers
-when you leave Emacs idle. And stuff like that.
+@item
+Scores with magnitudes between 3 and 60 will be shrunk by 3.
-Gnus will let you do stuff like that by defining various
-@dfn{handlers}. Each handler consists of three elements: A
-@var{function}, a @var{time}, and an @var{idle} parameter.
+@item
+Scores with magnitudes greater than 60 will be shrunk by 5% of the
+score.
+@end enumerate
-Here's an example of a handler that closes connections when Emacs has
-been idle for thirty minutes:
+If you don't like this decay function, write your own. It is called
+with the score to be decayed as its only parameter, and it should return
+the new score, which should be an integer.
-@lisp
-(gnus-demon-close-connections nil 30)
-@end lisp
+Gnus will try to decay scores once a day. If you haven't run Gnus for
+four days, Gnus will decay the scores four times, for instance.
-Here's a handler that scans for PGP headers every hour when Emacs is
-idle:
+@iftex
+@iflatex
+@chapter Message
+@include message.texi
+@chapter Emacs MIME
+@include emacs-mime.texi
+@chapter Sieve
+@include sieve.texi
+@chapter PGG
+@include pgg.texi
+@end iflatex
+@end iftex
-@lisp
-(gnus-demon-scan-pgp 60 t)
-@end lisp
+@node Various
+@chapter Various
-This @var{time} parameter and than @var{idle} parameter work together
-in a strange, but wonderful fashion. Basically, if @var{idle} is
-@code{nil}, then the function will be called every @var{time} minutes.
+@menu
+* Process/Prefix:: A convention used by many treatment commands.
+* Interactive:: Making Gnus ask you many questions.
+* Symbolic Prefixes:: How to supply some Gnus functions with options.
+* Formatting Variables:: You can specify what buffers should look like.
+* Window Layout:: Configuring the Gnus buffer windows.
+* Faces and Fonts:: How to change how faces look.
+* Compilation:: How to speed Gnus up.
+* Mode Lines:: Displaying information in the mode lines.
+* Highlighting and Menus:: Making buffers look all nice and cozy.
+* Buttons:: Get tendinitis in ten easy steps!
+* Daemons:: Gnus can do things behind your back.
+* NoCeM:: How to avoid spam and other fatty foods.
+* Undo:: Some actions can be undone.
+* Predicate Specifiers:: Specifying predicates.
+* Moderation:: What to do if you're a moderator.
+* Image Enhancements:: Modern versions of Emacs/XEmacs can display images.
+* Fuzzy Matching:: What's the big fuzz?
+* Thwarting Email Spam:: A how-to on avoiding unsolicited commercial email.
+* Various Various:: Things that are really various.
+@end menu
-If @var{idle} is @code{t}, then the function will be called after
-@var{time} minutes only if Emacs is idle. So if Emacs is never idle,
-the function will never be called. But once Emacs goes idle, the
-function will be called every @var{time} minutes.
-If @var{idle} is a number and @var{time} is a number, the function will
-be called every @var{time} minutes only when Emacs has been idle for
-@var{idle} minutes.
+@node Process/Prefix
+@section Process/Prefix
+@cindex process/prefix convention
-If @var{idle} is a number and @var{time} is @code{nil}, the function
-will be called once every time Emacs has been idle for @var{idle}
-minutes.
+Many functions, among them functions for moving, decoding and saving
+articles, use what is known as the @dfn{Process/Prefix convention}.
-And if @var{time} is a string, it should look like @samp{07:31}, and
-the function will then be called once every day somewhere near that
-time. Modified by the @var{idle} parameter, of course.
+This is a method for figuring out what articles the user wants the
+command to be performed on.
-@vindex gnus-demon-timestep
-(When I say ``minute'' here, I really mean @code{gnus-demon-timestep}
-seconds. This is 60 by default. If you change that variable,
-all the timings in the handlers will be affected.)
+It goes like this:
-So, if you want to add a handler, you could put something like this in
-your @file{.gnus} file:
+If the numeric prefix is N, perform the operation on the next N
+articles, starting with the current one. If the numeric prefix is
+negative, perform the operation on the previous N articles, starting
+with the current one.
-@findex gnus-demon-add-handler
-@lisp
-(gnus-demon-add-handler 'gnus-demon-close-connections 30 t)
-@end lisp
+@vindex transient-mark-mode
+If @code{transient-mark-mode} in non-@code{nil} and the region is
+active, all articles in the region will be worked upon.
-@findex gnus-demon-add-nocem
-@findex gnus-demon-add-scanmail
-@findex gnus-demon-add-rescan
-@findex gnus-demon-add-scan-timestamps
-@findex gnus-demon-add-disconnection
-Some ready-made functions to do this have been created:
-@code{gnus-demon-add-nocem}, @code{gnus-demon-add-disconnection},
-@code{gnus-demon-add-nntp-close-connection},
-@code{gnus-demon-add-scan-timestamps}, @code{gnus-demon-add-rescan}, and
-@code{gnus-demon-add-scanmail}. Just put those functions in your
-@file{.gnus} if you want those abilities.
+If there is no numeric prefix, but some articles are marked with the
+process mark, perform the operation on the articles marked with
+the process mark.
-@findex gnus-demon-init
-@findex gnus-demon-cancel
-@vindex gnus-demon-handlers
-If you add handlers to @code{gnus-demon-handlers} directly, you should
-run @code{gnus-demon-init} to make the changes take hold. To cancel all
-daemons, you can use the @code{gnus-demon-cancel} function.
+If there is neither a numeric prefix nor any articles marked with the
+process mark, just perform the operation on the current article.
-Note that adding daemons can be pretty naughty if you over do it. Adding
-functions that scan all news and mail from all servers every two seconds
-is a sure-fire way of getting booted off any respectable system. So
-behave.
-
-
-@node NoCeM
-@section NoCeM
-@cindex nocem
-@cindex spam
+Quite simple, really, but it needs to be made clear so that surprises
+are avoided.
-@dfn{Spamming} is posting the same article lots and lots of times.
-Spamming is bad. Spamming is evil.
+Commands that react to the process mark will push the current list of
+process marked articles onto a stack and will then clear all process
+marked articles. You can restore the previous configuration with the
+@kbd{M P y} command (@pxref{Setting Process Marks}).
-Spamming is usually canceled within a day or so by various anti-spamming
-agencies. These agencies usually also send out @dfn{NoCeM} messages.
-NoCeM is pronounced ``no see-'em'', and means what the name
-implies---these are messages that make the offending articles, like, go
-away.
+@vindex gnus-summary-goto-unread
+One thing that seems to shock & horrify lots of people is that, for
+instance, @kbd{3 d} does exactly the same as @kbd{d} @kbd{d} @kbd{d}.
+Since each @kbd{d} (which marks the current article as read) by default
+goes to the next unread article after marking, this means that @kbd{3 d}
+will mark the next three unread articles as read, no matter what the
+summary buffer looks like. Set @code{gnus-summary-goto-unread} to
+@code{nil} for a more straightforward action.
-What use are these NoCeM messages if the articles are canceled anyway?
-Some sites do not honor cancel messages and some sites just honor cancels
-from a select few people. Then you may wish to make use of the NoCeM
-messages, which are distributed in the @samp{alt.nocem.misc} newsgroup.
+Many commands do not use the process/prefix convention. All commands
+that do explicitly say so in this manual. To apply the process/prefix
+convention to commands that do not use it, you can use the @kbd{M-&}
+command. For instance, to mark all the articles in the group as
+expirable, you could say `M P b M-& E'.
-Gnus can read and parse the messages in this group automatically, and
-this will make spam disappear.
-There are some variables to customize, of course:
+@node Interactive
+@section Interactive
+@cindex interaction
@table @code
-@item gnus-use-nocem
-@vindex gnus-use-nocem
-Set this variable to @code{t} to set the ball rolling. It is @code{nil}
-by default.
-
-@item gnus-nocem-groups
-@vindex gnus-nocem-groups
-Gnus will look for NoCeM messages in the groups in this list. The
-default is @code{("news.lists.filters" "news.admin.net-abuse.bulletins"
-"alt.nocem.misc" "news.admin.net-abuse.announce")}.
-@item gnus-nocem-issuers
-@vindex gnus-nocem-issuers
-There are many people issuing NoCeM messages. This list says what
-people you want to listen to. The default is @code{("Automoose-1"
-"rbraver@@ohww.norman.ok.us" "clewis@@ferret.ocunix.on.ca"
-"jem@@xpat.com" "snowhare@@xmission.com" "red@@redpoll.mrfs.oh.us
-(Richard E. Depew)")}; fine, upstanding citizens all of them.
+@item gnus-novice-user
+@vindex gnus-novice-user
+If this variable is non-@code{nil}, you are either a newcomer to the
+World of Usenet, or you are very cautious, which is a nice thing to be,
+really. You will be given questions of the type ``Are you sure you want
+to do this?'' before doing anything dangerous. This is @code{t} by
+default.
-Known despammers that you can put in this list include:
+@item gnus-expert-user
+@vindex gnus-expert-user
+If this variable is non-@code{nil}, you will seldom be asked any
+questions by Gnus. It will simply assume you know what you're doing, no
+matter how strange.
-@table @samp
-@item clewis@@ferret.ocunix.on.ca;
-@cindex Chris Lewis
-Chris Lewis---Major Canadian despammer who has probably canceled more
-usenet abuse than anybody else.
-
-@item Automoose-1
-@cindex CancelMoose[tm]
-The CancelMoose[tm] on autopilot. The CancelMoose[tm] is reputed to be
-Norwegian, and was the person(s) who invented NoCeM.
-
-@item jem@@xpat.com;
-@cindex Jem
-John Milburn---despammer located in Korea who is getting very busy these
-days.
+@item gnus-interactive-catchup
+@vindex gnus-interactive-catchup
+Require confirmation before catching up a group if non-@code{nil}. It
+is @code{t} by default.
-@item red@@redpoll.mrfs.oh.us (Richard E. Depew)
-Richard E. Depew---lone American despammer. He mostly cancels binary
-postings to non-binary groups and removes spews (regurgitated articles).
+@item gnus-interactive-exit
+@vindex gnus-interactive-exit
+Require confirmation before exiting Gnus. This variable is @code{t} by
+default.
@end table
-You do not have to heed NoCeM messages from all these people---just the
-ones you want to listen to. You also don't have to accept all NoCeM
-messages from the people you like. Each NoCeM message has a @dfn{type}
-header that gives the message a (more or less, usually less) rigorous
-definition. Common types are @samp{spam}, @samp{spew}, @samp{mmf},
-@samp{binary}, and @samp{troll}. To specify this, you have to use
-@var{(issuer conditions ...)} elements in the list. Each condition is
-either a string (which is a regexp that matches types you want to use)
-or a list on the form @code{(not STRING)}, where @var{string} is a
-regexp that matches types you don't want to use.
-
-For instance, if you want all NoCeM messages from Chris Lewis except his
-@samp{troll} messages, you'd say:
-
-@lisp
-("clewis@@ferret.ocunix.on.ca" ".*" (not "troll"))
-@end lisp
-
-On the other hand, if you just want nothing but his @samp{spam} and
-@samp{spew} messages, you'd say:
-
-@lisp
-("clewis@@ferret.ocunix.on.ca" (not ".*") "spew" "spam")
-@end lisp
-The specs are applied left-to-right.
+@node Symbolic Prefixes
+@section Symbolic Prefixes
+@cindex symbolic prefixes
+Quite a lot of Emacs commands react to the (numeric) prefix. For
+instance, @kbd{C-u 4 C-f} moves point four characters forward, and
+@kbd{C-u 9 0 0 I s s p} adds a permanent @code{Subject} substring score
+rule of 900 to the current article.
-@item gnus-nocem-verifyer
-@vindex gnus-nocem-verifyer
-@findex mc-verify
-This should be a function for verifying that the NoCeM issuer is who she
-says she is. The default is @code{mc-verify}, which is a Mailcrypt
-function. If this is too slow and you don't care for verification
-(which may be dangerous), you can set this variable to @code{nil}.
+This is all nice and well, but what if you want to give a command some
+additional information? Well, what most commands do is interpret the
+``raw'' prefix in some special way. @kbd{C-u 0 C-x C-s} means that one
+doesn't want a backup file to be created when saving the current buffer,
+for instance. But what if you want to save without making a backup
+file, and you want Emacs to flash lights and play a nice tune at the
+same time? You can't, and you're probably perfectly happy that way.
-If you want signed NoCeM messages to be verified and unsigned messages
-not to be verified (but used anyway), you could do something like:
+@kindex M-i (Summary)
+@findex gnus-symbolic-argument
+I'm not, so I've added a second prefix---the @dfn{symbolic prefix}. The
+prefix key is @kbd{M-i} (@code{gnus-symbolic-argument}), and the next
+character typed in is the value. You can stack as many @kbd{M-i}
+prefixes as you want. @kbd{M-i a C-M-u} means ``feed the @kbd{C-M-u}
+command the symbolic prefix @code{a}''. @kbd{M-i a M-i b C-M-u} means
+``feed the @kbd{C-M-u} command the symbolic prefixes @code{a} and
+@code{b}''. You get the drift.
-@lisp
-(setq gnus-nocem-verifyer 'my-gnus-mc-verify)
+Typing in symbolic prefixes to commands that don't accept them doesn't
+hurt, but it doesn't do any good either. Currently not many Gnus
+functions make use of the symbolic prefix.
-(defun my-gnus-mc-verify ()
- (not (eq 'forged
- (ignore-errors
- (if (mc-verify)
- t
- 'forged)))))
-@end lisp
+If you're interested in how Gnus implements this, @pxref{Extended
+Interactive}.
-This might be dangerous, though.
-@item gnus-nocem-directory
-@vindex gnus-nocem-directory
-This is where Gnus will store its NoCeM cache files. The default is
-@file{~/News/NoCeM/}.
+@node Formatting Variables
+@section Formatting Variables
+@cindex formatting variables
-@item gnus-nocem-expiry-wait
-@vindex gnus-nocem-expiry-wait
-The number of days before removing old NoCeM entries from the cache.
-The default is 15. If you make it shorter Gnus will be faster, but you
-might then see old spam.
+Throughout this manual you've probably noticed lots of variables called
+things like @code{gnus-group-line-format} and
+@code{gnus-summary-mode-line-format}. These control how Gnus is to
+output lines in the various buffers. There's quite a lot of them.
+Fortunately, they all use the same syntax, so there's not that much to
+be annoyed by.
-@end table
+Here's an example format spec (from the group buffer): @samp{%M%S%5y:
+%(%g%)\n}. We see that it is indeed extremely ugly, and that there are
+lots of percentages everywhere.
-Using NoCeM could potentially be a memory hog. If you have many living
-(i. e., subscribed or unsubscribed groups), your Emacs process will grow
-big. If this is a problem, you should kill off all (or most) of your
-unsubscribed groups (@pxref{Subscription Commands}).
+@menu
+* Formatting Basics:: A formatting variable is basically a format string.
+* Mode Line Formatting:: Some rules about mode line formatting variables.
+* Advanced Formatting:: Modifying output in various ways.
+* User-Defined Specs:: Having Gnus call your own functions.
+* Formatting Fonts:: Making the formatting look colorful and nice.
+* Positioning Point:: Moving point to a position after an operation.
+* Tabulation:: Tabulating your output.
+* Wide Characters:: Dealing with wide characters.
+@end menu
+Currently Gnus uses the following formatting variables:
+@code{gnus-group-line-format}, @code{gnus-summary-line-format},
+@code{gnus-server-line-format}, @code{gnus-topic-line-format},
+@code{gnus-group-mode-line-format},
+@code{gnus-summary-mode-line-format},
+@code{gnus-article-mode-line-format},
+@code{gnus-server-mode-line-format}, and
+@code{gnus-summary-pick-line-format}.
-@node Undo
-@section Undo
-@cindex undo
+All these format variables can also be arbitrary elisp forms. In that
+case, they will be @code{eval}ed to insert the required lines.
-It is very useful to be able to undo actions one has done. In normal
-Emacs buffers, it's easy enough---you just push the @code{undo} button.
-In Gnus buffers, however, it isn't that simple.
+@kindex M-x gnus-update-format
+@findex gnus-update-format
+Gnus includes a command to help you while creating your own format
+specs. @kbd{M-x gnus-update-format} will @code{eval} the current form,
+update the spec in question and pop you to a buffer where you can
+examine the resulting lisp code to be run to generate the line.
-The things Gnus displays in its buffer is of no value whatsoever to
-Gnus---it's all just data designed to look nice to the user.
-Killing a group in the group buffer with @kbd{C-k} makes the line
-disappear, but that's just a side-effect of the real action---the
-removal of the group in question from the internal Gnus structures.
-Undoing something like that can't be done by the normal Emacs
-@code{undo} function.
-Gnus tries to remedy this somewhat by keeping track of what the user
-does and coming up with actions that would reverse the actions the user
-takes. When the user then presses the @code{undo} key, Gnus will run
-the code to reverse the previous action, or the previous actions.
-However, not all actions are easily reversible, so Gnus currently offers
-a few key functions to be undoable. These include killing groups,
-yanking groups, and changing the list of read articles of groups.
-That's it, really. More functions may be added in the future, but each
-added function means an increase in data to be stored, so Gnus will
-never be totally undoable.
-@findex gnus-undo-mode
-@vindex gnus-use-undo
-@findex gnus-undo
-The undoability is provided by the @code{gnus-undo-mode} minor mode. It
-is used if @code{gnus-use-undo} is non-@code{nil}, which is the
-default. The @kbd{M-C-_} key performs the @code{gnus-undo} command
-command, which should feel kinda like the normal Emacs @code{undo}
-command.
+@node Formatting Basics
+@subsection Formatting Basics
+Each @samp{%} element will be replaced by some string or other when the
+buffer in question is generated. @samp{%5y} means ``insert the @samp{y}
+spec, and pad with spaces to get a 5-character field''.
-@node Moderation
-@section Moderation
-@cindex moderation
+As with normal C and Emacs Lisp formatting strings, the numerical
+modifier between the @samp{%} and the formatting type character will
+@dfn{pad} the output so that it is always at least that long.
+@samp{%5y} will make the field always (at least) five characters wide by
+padding with spaces to the left. If you say @samp{%-5y}, it will pad to
+the right instead.
-If you are a moderator, you can use the @file{gnus-mdrtn.el} package.
-It is not included in the standard Gnus package. Write a mail to
-@samp{larsi@@gnus.org} and state what group you moderate, and you'll
-get a copy.
+You may also wish to limit the length of the field to protect against
+particularly wide values. For that you can say @samp{%4,6y}, which
+means that the field will never be more than 6 characters wide and never
+less than 4 characters wide.
-The moderation package is implemented as a minor mode for summary
-buffers. Put
+Also Gnus supports some extended format specifications, such as
+@samp{%&user-date;}.
-@lisp
-(add-hook 'gnus-summary-mode-hook 'gnus-moderate)
-@end lisp
-in your @file{.gnus.el} file.
+@node Mode Line Formatting
+@subsection Mode Line Formatting
-If you are the moderator of @samp{rec.zoofle}, this is how it's
-supposed to work:
+Mode line formatting variables (e.g.,
+@code{gnus-summary-mode-line-format}) follow the same rules as other,
+buffer line oriented formatting variables (@pxref{Formatting Basics})
+with the following two differences:
@enumerate
-@item
-You split your incoming mail by matching on
-@samp{Newsgroups:.*rec.zoofle}, which will put all the to-be-posted
-articles in some mail group---for instance, @samp{nnml:rec.zoofle}.
@item
-You enter that group once in a while and post articles using the @kbd{e}
-(edit-and-post) or @kbd{s} (just send unedited) commands.
+There must be no newline (@samp{\n}) at the end.
@item
-If, while reading the @samp{rec.zoofle} newsgroup, you happen upon some
-articles that weren't approved by you, you can cancel them with the
-@kbd{c} command.
+The special @samp{%%b} spec can be used to display the buffer name.
+Well, it's no spec at all, really---@samp{%%} is just a way to quote
+@samp{%} to allow it to pass through the formatting machinery unmangled,
+so that Emacs receives @samp{%b}, which is something the Emacs mode line
+display interprets to mean ``show the buffer name''. For a full list of
+mode line specs Emacs understands, see the documentation of the
+@code{mode-line-format} variable.
+
@end enumerate
-To use moderation mode in these two groups, say:
-@lisp
-(setq gnus-moderated-list
- "^nnml:rec.zoofle$\\|^rec.zoofle$")
-@end lisp
+@node Advanced Formatting
+@subsection Advanced Formatting
+It is frequently useful to post-process the fields in some way.
+Padding, limiting, cutting off parts and suppressing certain values can
+be achieved by using @dfn{tilde modifiers}. A typical tilde spec might
+look like @samp{%~(cut 3)~(ignore "0")y}.
-@node XEmacs Enhancements
-@section XEmacs Enhancements
-@cindex XEmacs
+These are the valid modifiers:
-XEmacs is able to display pictures and stuff, so Gnus has taken
-advantage of that.
+@table @code
+@item pad
+@itemx pad-left
+Pad the field to the left with spaces until it reaches the required
+length.
-@menu
-* Picons:: How to display pictures of what your reading.
-* Smileys:: Show all those happy faces the way they were meant to be shown.
-* Toolbar:: Click'n'drool.
-* XVarious:: Other XEmacsy Gnusey variables.
-@end menu
+@item pad-right
+Pad the field to the right with spaces until it reaches the required
+length.
+@item max
+@itemx max-left
+Cut off characters from the left until it reaches the specified length.
-@node Picons
-@subsection Picons
+@item max-right
+Cut off characters from the right until it reaches the specified
+length.
-@iftex
-@iflatex
-\include{picons}
-@end iflatex
-@end iftex
+@item cut
+@itemx cut-left
+Cut off the specified number of characters from the left.
-So... You want to slow down your news reader even more! This is a
-good way to do so. Its also a great way to impress people staring
-over your shoulder as you read news.
+@item cut-right
+Cut off the specified number of characters from the right.
-@menu
-* Picon Basics:: What are picons and How do I get them.
-* Picon Requirements:: Don't go further if you aren't using XEmacs.
-* Easy Picons:: Displaying Picons---the easy way.
-* Hard Picons:: The way you should do it. You'll learn something.
-* Picon Useless Configuration:: Other variables you can trash/tweak/munge/play with.
-@end menu
+@item ignore
+Return an empty string if the field is equal to the specified value.
+@item form
+Use the specified form as the field value when the @samp{@@} spec is
+used.
-@node Picon Basics
-@subsubsection Picon Basics
+Here's an example:
-What are Picons? To quote directly from the Picons Web site:
+@lisp
+"~(form (current-time-string))@@"
+@end lisp
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
+@end table
-@quotation
-@dfn{Picons} is short for ``personal icons''. They're small,
-constrained images used to represent users and domains on the net,
-organized into databases so that the appropriate image for a given
-e-mail address can be found. Besides users and domains, there are picon
-databases for Usenet newsgroups and weather forecasts. The picons are
-in either monochrome @code{XBM} format or color @code{XPM} and
-@code{GIF} formats.
-@end quotation
+Let's take an example. The @samp{%o} spec in the summary mode lines
+will return a date in compact ISO8601 format---@samp{19960809T230410}.
+This is quite a mouthful, so we want to shave off the century number and
+the time, leaving us with a six-character date. That would be
+@samp{%~(cut-left 2)~(max-right 6)~(pad 6)o}. (Cutting is done before
+maxing, and we need the padding to ensure that the date is never less
+than 6 characters to make it look nice in columns.)
-@vindex gnus-picons-piconsearch-url
-If you have a permanent connection to the Internet you can use Steve
-Kinzler's Picons Search engine by setting
-@code{gnus-picons-piconsearch-url} to the string @*
-@file{http://www.cs.indiana.edu/picons/search.html}.
+Ignoring is done first; then cutting; then maxing; and then as the very
+last operation, padding.
-@vindex gnus-picons-database
-Otherwise you need a local copy of his database. For instructions on
-obtaining and installing the picons databases, point your Web browser at @*
-@file{http://www.cs.indiana.edu/picons/ftp/index.html}. Gnus expects
-picons to be installed into a location pointed to by
-@code{gnus-picons-database}.
+If you use lots of these advanced thingies, you'll find that Gnus gets
+quite slow. This can be helped enormously by running @kbd{M-x
+gnus-compile} when you are satisfied with the look of your lines.
+@xref{Compilation}.
-@node Picon Requirements
-@subsubsection Picon Requirements
+@node User-Defined Specs
+@subsection User-Defined Specs
-To have Gnus display Picons for you, you must be running XEmacs
-19.13 or greater since all other versions of Emacs aren't yet able to
-display images.
+All the specs allow for inserting user defined specifiers---@samp{u}.
+The next character in the format string should be a letter. Gnus
+will call the function @code{gnus-user-format-function-}@samp{X}, where
+@samp{X} is the letter following @samp{%u}. The function will be passed
+a single parameter---what the parameter means depends on what buffer
+it's being called from. The function should return a string, which will
+be inserted into the buffer just like information from any other
+specifier. This function may also be called with dummy values, so it
+should protect against that.
-Additionally, you must have @code{x} support compiled into XEmacs. To
-display color picons which are much nicer than the black & white one,
-you also need one of @code{xpm} or @code{gif} compiled into XEmacs.
+Also Gnus supports extended user-defined specs, such as @samp{%u&foo;}.
+Gnus will call the function @code{gnus-user-format-function-}@samp{foo}.
-@vindex gnus-picons-convert-x-face
-If you want to display faces from @code{X-Face} headers, you should have
-the @code{xface} support compiled into XEmacs. Otherwise you must have
-the @code{netpbm} utilities installed, or munge the
-@code{gnus-picons-convert-x-face} variable to use something else.
+You can also use tilde modifiers (@pxref{Advanced Formatting} to achieve
+much the same without defining new functions. Here's an example:
+@samp{%~(form (count-lines (point-min) (point)))@@}. The form
+given here will be evaluated to yield the current line number, and then
+inserted.
-@node Easy Picons
-@subsubsection Easy Picons
+@node Formatting Fonts
+@subsection Formatting Fonts
-To enable displaying picons, simply put the following line in your
-@file{~/.gnus} file and start Gnus.
+There are specs for highlighting, and these are shared by all the format
+variables. Text inside the @samp{%(} and @samp{%)} specifiers will get
+the special @code{mouse-face} property set, which means that it will be
+highlighted (with @code{gnus-mouse-face}) when you put the mouse pointer
+over it.
-@lisp
-(setq gnus-use-picons t)
-(setq gnus-treat-display-picons t)
-@end lisp
+Text inside the @samp{%@{} and @samp{%@}} specifiers will have their
+normal faces set using @code{gnus-face-0}, which is @code{bold} by
+default. If you say @samp{%1@{}, you'll get @code{gnus-face-1} instead,
+and so on. Create as many faces as you wish. The same goes for the
+@code{mouse-face} specs---you can say @samp{%3(hello%)} to have
+@samp{hello} mouse-highlighted with @code{gnus-mouse-face-3}.
-and make sure @code{gnus-picons-database} points to the directory
-containing the Picons databases.
+Text inside the @samp{%<<} and @samp{%>>} specifiers will get the
+special @code{balloon-help} property set to @code{gnus-balloon-face-0}.
+If you say @samp{%1<<}, you'll get @code{gnus-balloon-face-1} and so on.
+The @code{gnus-balloon-face-*} variables should be either strings or
+symbols naming functions that return a string. When the mouse passes
+over text with this property set, a balloon window will appear and
+display the string. Please refer to @ref{(emacs)Help Echo} (in GNU
+Emacs) or the doc string of @code{balloon-help-mode} (in XEmacs) for
+more information on this. (For technical reasons, the guillemets have
+been approximated as @samp{<<} and @samp{>>} in this paragraph.)
-Alternatively if you want to use the web piconsearch engine add this:
+Here's an alternative recipe for the group buffer:
@lisp
-(setq gnus-picons-piconsearch-url
- "http://www.cs.indiana.edu:800/piconsearch")
+;; Create three face types.
+(setq gnus-face-1 'bold)
+(setq gnus-face-3 'italic)
+
+;; We want the article count to be in
+;; a bold and green face. So we create
+;; a new face called `my-green-bold'.
+(copy-face 'bold 'my-green-bold)
+;; Set the color.
+(set-face-foreground 'my-green-bold "ForestGreen")
+(setq gnus-face-2 'my-green-bold)
+
+;; Set the new & fancy format.
+(setq gnus-group-line-format
+ "%M%S%3@{%5y%@}%2[:%] %(%1@{%g%@}%)\n")
@end lisp
+I'm sure you'll be able to use this scheme to create totally unreadable
+and extremely vulgar displays. Have fun!
-@node Hard Picons
-@subsubsection Hard Picons
+Note that the @samp{%(} specs (and friends) do not make any sense on the
+mode-line variables.
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
+@node Positioning Point
+@subsection Positioning Point
-Gnus can display picons for you as you enter and leave groups and
-articles. It knows how to interact with three sections of the picons
-database. Namely, it can display the picons newsgroup pictures,
-author's face picture(s), and the authors domain. To enable this
-feature, you need to select where to get the picons from, and where to
-display them.
+Gnus usually moves point to a pre-defined place on each line in most
+buffers. By default, point move to the first colon character on the
+line. You can customize this behaviour in three different ways.
-@table @code
+You can move the colon character to somewhere else on the line.
-@item gnus-picons-database
-@vindex gnus-picons-database
-The location of the picons database. Should point to a directory
-containing the @file{news}, @file{domains}, @file{users} (and so on)
-subdirectories. This is only useful if
-@code{gnus-picons-piconsearch-url} is @code{nil}. Defaults to
-@file{/usr/local/faces/}.
+@findex gnus-goto-colon
+You can redefine the function that moves the point to the colon. The
+function is called @code{gnus-goto-colon}.
-@item gnus-picons-piconsearch-url
-@vindex gnus-picons-piconsearch-url
-The URL for the web picons search engine. The only currently known
-engine is @file{http://www.cs.indiana.edu:800/piconsearch}. To
-workaround network delays, icons will be fetched in the background. If
-this is @code{nil} 'the default), then picons are fetched from local
-database indicated by @code{gnus-picons-database}.
+But perhaps the most convenient way to deal with this, if you don't want
+to have a colon in your line, is to use the @samp{%*} specifier. If you
+put a @samp{%*} somewhere in your format line definition, Gnus will
+place point there.
-@item gnus-picons-display-where
-@vindex gnus-picons-display-where
-Where the picon images should be displayed. It is @code{picons} by
-default (which by default maps to the buffer @samp{*Picons*}). Other
-valid places could be @code{article}, @code{summary}, or
-@samp{*scratch*} for all I care. Just make sure that you've made the
-buffer visible using the standard Gnus window configuration
-routines---@pxref{Windows Configuration}.
-@item gnus-picons-group-excluded-groups
-@vindex gnus-picons-group-excluded-groups
-Groups that are matched by this regexp won't have their group icons
-displayed.
+@node Tabulation
+@subsection Tabulation
-@end table
+You can usually line up your displays by padding and cutting your
+strings. However, when combining various strings of different size, it
+can often be more convenient to just output the strings, and then worry
+about lining up the following text afterwards.
-Note: If you set @code{gnus-use-picons} to @code{t}, it will set up your
-window configuration for you to include the @code{picons} buffer.
+To do that, Gnus supplies tabulator specs--@samp{%=}. There are two
+different types---@dfn{hard tabulators} and @dfn{soft tabulators}.
-Now that you've made those decision, you need to add the following
-functions to the appropriate hooks so these pictures will get displayed
-at the right time.
+@samp{%50=} will insert space characters to pad the line up to column
+50. If the text is already past column 50, nothing will be inserted.
+This is the soft tabulator.
-@vindex gnus-picons-display-where
-@table @code
-@item gnus-article-display-picons
-@findex gnus-article-display-picons
-Looks up and displays the picons for the author and the author's domain
-in the @code{gnus-picons-display-where} buffer.
+@samp{%-50=} will insert space characters to pad the line up to column
+50. If the text is already past column 50, the excess text past column
+50 will be removed. This is the hard tabulator.
-@item gnus-picons-article-display-x-face
-@findex gnus-article-display-picons
-Decodes and displays the X-Face header if present.
-@end table
+@node Wide Characters
+@subsection Wide Characters
+Proportional fonts in most countries have characters of the same width.
+Some countries, however, use Latin characters mixed with wider
+characters---most notable East Asian countries.
+The problem is that when formatting, Gnus assumes that if a string is 10
+characters wide, it'll be 10 Latin characters wide on the screen. In
+these countries, that's not true.
-@node Picon Useless Configuration
-@subsubsection Picon Useless Configuration
+@vindex gnus-use-correct-string-widths
+To help fix this, you can set @code{gnus-use-correct-string-widths} to
+@code{t}. This makes buffer generation slower, but the results will be
+prettier. The default value under XEmacs is @code{t} but @code{nil}
+for Emacs.
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
-The following variables offer further control over how things are
-done, where things are located, and other useless stuff you really
-don't need to worry about.
+@node Window Layout
+@section Window Layout
+@cindex window layout
-@table @code
+No, there's nothing here about X, so be quiet.
-@item gnus-picons-news-directories
-@vindex gnus-picons-news-directories
-List of subdirectories to search in @code{gnus-picons-database} for
-newsgroups faces. @code{("news")} is the default.
+@vindex gnus-use-full-window
+If @code{gnus-use-full-window} non-@code{nil}, Gnus will delete all
+other windows and occupy the entire Emacs screen by itself. It is
+@code{t} by default.
-@item gnus-picons-user-directories
-@vindex gnus-picons-user-directories
-List of subdirectories to search in @code{gnus-picons-database} for user
-faces. @code{("local" "users" "usenix" "misc")} is the default.
+Setting this variable to @code{nil} kinda works, but there are
+glitches. Use at your own peril.
-@item gnus-picons-domain-directories
-@vindex gnus-picons-domain-directories
-List of subdirectories to search in @code{gnus-picons-database} for
-domain name faces. Defaults to @code{("domains")}. Some people may
-want to add @samp{"unknown"} to this list.
-
-@item gnus-picons-convert-x-face
-@vindex gnus-picons-convert-x-face
-If you don't have @code{xface} support builtin XEmacs, this is the
-command to use to convert the @code{X-Face} header to an X bitmap
-(@code{xbm}). Defaults to @code{(format "@{ echo '/* Width=48,
-Height=48 */'; uncompface; @} | icontopbm | pbmtoxbm > %s"
-gnus-picons-x-face-file-name)}
-
-@item gnus-picons-x-face-file-name
-@vindex gnus-picons-x-face-file-name
-Names a temporary file to store the @code{X-Face} bitmap in. Defaults
-to @code{(format "/tmp/picon-xface.%s.xbm" (user-login-name))}.
-
-@item gnus-picons-has-modeline-p
-@vindex gnus-picons-has-modeline-p
-If you have set @code{gnus-picons-display-where} to @code{picons}, your
-XEmacs frame will become really cluttered. To alleviate this a bit you
-can set @code{gnus-picons-has-modeline-p} to @code{nil}; this will
-remove the mode line from the Picons buffer. This is only useful if
-@code{gnus-picons-display-where} is @code{picons}.
-
-@item gnus-picons-refresh-before-display
-@vindex gnus-picons-refresh-before-display
-If non-nil, display the article buffer before computing the picons.
-Defaults to @code{nil}.
-
-@item gnus-picons-display-as-address
-@vindex gnus-picons-display-as-address
-If @code{t} display textual email addresses along with pictures.
-Defaults to @code{t}.
+@vindex gnus-buffer-configuration
+@code{gnus-buffer-configuration} describes how much space each Gnus
+buffer should be given. Here's an excerpt of this variable:
-@item gnus-picons-file-suffixes
-@vindex gnus-picons-file-suffixes
-Ordered list of suffixes on picon file names to try. Defaults to
-@code{("xpm" "gif" "xbm")} minus those not builtin your XEmacs.
+@lisp
+((group (vertical 1.0 (group 1.0 point)
+ (if gnus-carpal (group-carpal 4))))
+ (article (vertical 1.0 (summary 0.25 point)
+ (article 1.0))))
+@end lisp
-@item gnus-picons-setup-hook
-@vindex gnus-picons-setup-hook
-Hook run in the picon buffer, if that is displayed.
+This is an alist. The @dfn{key} is a symbol that names some action or
+other. For instance, when displaying the group buffer, the window
+configuration function will use @code{group} as the key. A full list of
+possible names is listed below.
-@item gnus-picons-display-article-move-p
-@vindex gnus-picons-display-article-move-p
-Whether to move point to first empty line when displaying picons. This
-has only an effect if `gnus-picons-display-where' has value `article'.
+The @dfn{value} (i.e., the @dfn{split}) says how much space each buffer
+should occupy. To take the @code{article} split as an example -
-If @code{nil}, display the picons in the @code{From} and
-@code{Newsgroups} lines. This is the defailt.
+@lisp
+(article (vertical 1.0 (summary 0.25 point)
+ (article 1.0)))
+@end lisp
-@item gnus-picons-clear-cache-on-shutdown
-@vindex gnus-picons-clear-cache-on-shutdown
-Whether to clear the picons cache when exiting gnus. Gnus caches every
-picons it finds while it is running. This saves some time in the search
-process but eats some memory. If this variable is set to @code{nil},
-Gnus will never clear the cache itself; you will have to manually call
-@code{gnus-picons-clear-cache} to clear it. Otherwise the cache will be
-cleared every time you exit Gnus. Defaults to @code{t}.
+This @dfn{split} says that the summary buffer should occupy 25% of upper
+half of the screen, and that it is placed over the article buffer. As
+you may have noticed, 100% + 25% is actually 125% (yup, I saw y'all
+reaching for that calculator there). However, the special number
+@code{1.0} is used to signal that this buffer should soak up all the
+rest of the space available after the rest of the buffers have taken
+whatever they need. There should be only one buffer with the @code{1.0}
+size spec per split.
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
+Point will be put in the buffer that has the optional third element
+@code{point}. In a @code{frame} split, the last subsplit having a leaf
+split where the tag @code{frame-focus} is a member (i.e. is the third or
+fourth element in the list, depending on whether the @code{point} tag is
+present) gets focus.
-@end table
+Here's a more complicated example:
-@node Smileys
-@subsection Smileys
-@cindex smileys
+@lisp
+(article (vertical 1.0 (group 4)
+ (summary 0.25 point)
+ (if gnus-carpal (summary-carpal 4))
+ (article 1.0)))
+@end lisp
-@iftex
-@iflatex
-\gnusfig{-3cm}{0.5cm}{\epsfig{figure=tmp/BigFace.ps,height=20cm}}
-\input{smiley}
-@end iflatex
-@end iftex
+If the size spec is an integer instead of a floating point number,
+then that number will be used to say how many lines a buffer should
+occupy, not a percentage.
-@dfn{Smiley} is a package separate from Gnus, but since Gnus is
-currently the only package that uses Smiley, it is documented here.
+If the @dfn{split} looks like something that can be @code{eval}ed (to be
+precise---if the @code{car} of the split is a function or a subr), this
+split will be @code{eval}ed. If the result is non-@code{nil}, it will
+be used as a split. This means that there will be three buffers if
+@code{gnus-carpal} is @code{nil}, and four buffers if @code{gnus-carpal}
+is non-@code{nil}.
-In short---to use Smiley in Gnus, put the following in your
-@file{.gnus.el} file:
+Not complicated enough for you? Well, try this on for size:
@lisp
-(setq gnus-treat-display-smiley t)
+(article (horizontal 1.0
+ (vertical 0.5
+ (group 1.0)
+ (gnus-carpal 4))
+ (vertical 1.0
+ (summary 0.25 point)
+ (summary-carpal 4)
+ (article 1.0))))
@end lisp
-Smiley maps text smiley faces---@samp{:-)}, @samp{:-=}, @samp{:-(} and
-the like---to pictures and displays those instead of the text smiley
-faces. The conversion is controlled by a list of regexps that matches
-text and maps that to file names.
-
-@vindex smiley-nosey-regexp-alist
-@vindex smiley-deformed-regexp-alist
-Smiley supplies two example conversion alists by default:
-@code{smiley-deformed-regexp-alist} (which matches @samp{:)}, @samp{:(}
-and so on), and @code{smiley-nosey-regexp-alist} (which matches
-@samp{:-)}, @samp{:-(} and so on).
+Whoops. Two buffers with the mystery 100% tag. And what's that
+@code{horizontal} thingie?
-The alist used is specified by the @code{smiley-regexp-alist} variable,
-which defaults to the value of @code{smiley-deformed-regexp-alist}.
+If the first element in one of the split is @code{horizontal}, Gnus will
+split the window horizontally, giving you two windows side-by-side.
+Inside each of these strips you may carry on all you like in the normal
+fashion. The number following @code{horizontal} says what percentage of
+the screen is to be given to this strip.
-The first item in each element is the regexp to be matched; the second
-element is the regexp match group that is to be replaced by the picture;
-and the third element is the name of the file to be displayed.
+For each split, there @emph{must} be one element that has the 100% tag.
+The splitting is never accurate, and this buffer will eat any leftover
+lines from the splits.
-The following variables customize where Smiley will look for these
-files, as well as the color to be used and stuff:
+To be slightly more formal, here's a definition of what a valid split
+may look like:
-@table @code
+@example
+split = frame | horizontal | vertical | buffer | form
+frame = "(frame " size *split ")"
+horizontal = "(horizontal " size *split ")"
+vertical = "(vertical " size *split ")"
+buffer = "(" buf-name " " size *[ "point" ] *[ "frame-focus"] ")"
+size = number | frame-params
+buf-name = group | article | summary ...
+@end example
-@item smiley-data-directory
-@vindex smiley-data-directory
-Where Smiley will look for smiley faces files.
+The limitations are that the @code{frame} split can only appear as the
+top-level split. @var{form} should be an Emacs Lisp form that should
+return a valid split. We see that each split is fully recursive, and
+may contain any number of @code{vertical} and @code{horizontal} splits.
-@item smiley-flesh-color
-@vindex smiley-flesh-color
-Skin color. The default is @samp{yellow}, which is really racist.
+@vindex gnus-window-min-width
+@vindex gnus-window-min-height
+@cindex window height
+@cindex window width
+Finding the right sizes can be a bit complicated. No window may be less
+than @code{gnus-window-min-height} (default 1) characters high, and all
+windows must be at least @code{gnus-window-min-width} (default 1)
+characters wide. Gnus will try to enforce this before applying the
+splits. If you want to use the normal Emacs window width/height limit,
+you can just set these two variables to @code{nil}.
-@item smiley-features-color
-@vindex smiley-features-color
-Color of the features of the face. The default is @samp{black}.
+If you're not familiar with Emacs terminology, @code{horizontal} and
+@code{vertical} splits may work the opposite way of what you'd expect.
+Windows inside a @code{horizontal} split are shown side-by-side, and
+windows within a @code{vertical} split are shown above each other.
-@item smiley-tongue-color
-@vindex smiley-tongue-color
-Color of the tongue. The default is @samp{red}.
+@findex gnus-configure-frame
+If you want to experiment with window placement, a good tip is to call
+@code{gnus-configure-frame} directly with a split. This is the function
+that does all the real work when splitting buffers. Below is a pretty
+nonsensical configuration with 5 windows; two for the group buffer and
+three for the article buffer. (I said it was nonsensical.) If you
+@code{eval} the statement below, you can get an idea of how that would
+look straight away, without going through the normal Gnus channels.
+Play with it until you're satisfied, and then use
+@code{gnus-add-configuration} to add your new creation to the buffer
+configuration list.
-@item smiley-circle-color
-@vindex smiley-circle-color
-Color of the circle around the face. The default is @samp{black}.
+@lisp
+(gnus-configure-frame
+ '(horizontal 1.0
+ (vertical 10
+ (group 1.0)
+ (article 0.3 point))
+ (vertical 1.0
+ (article 1.0)
+ (horizontal 4
+ (group 1.0)
+ (article 10)))))
+@end lisp
-@item smiley-mouse-face
-@vindex smiley-mouse-face
-Face used for mouse highlighting over the smiley face.
+You might want to have several frames as well. No prob---just use the
+@code{frame} split:
-@end table
+@lisp
+(gnus-configure-frame
+ '(frame 1.0
+ (vertical 1.0
+ (summary 0.25 point frame-focus)
+ (article 1.0))
+ (vertical ((height . 5) (width . 15)
+ (user-position . t)
+ (left . -1) (top . 1))
+ (picon 1.0))))
+@end lisp
-@node Toolbar
-@subsection Toolbar
+This split will result in the familiar summary/article window
+configuration in the first (or ``main'') frame, while a small additional
+frame will be created where picons will be shown. As you can see,
+instead of the normal @code{1.0} top-level spec, each additional split
+should have a frame parameter alist as the size spec.
+@xref{Frame Parameters, , Frame Parameters, elisp, The GNU Emacs Lisp
+Reference Manual}. Under XEmacs, a frame property list will be
+accepted, too---for instance, @code{(height 5 width 15 left -1 top 1)}
+is such a plist.
+The list of all possible keys for @code{gnus-buffer-configuration} can
+be found in its default value.
-@table @code
+Note that the @code{message} key is used for both
+@code{gnus-group-mail} and @code{gnus-summary-mail-other-window}. If
+it is desirable to distinguish between the two, something like this
+might be used:
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
-
-@item gnus-use-toolbar
-@vindex gnus-use-toolbar
-If @code{nil}, don't display toolbars. If non-@code{nil}, it should be
-one of @code{default-toolbar}, @code{top-toolbar}, @code{bottom-toolbar},
-@code{right-toolbar}, or @code{left-toolbar}.
-
-@item gnus-group-toolbar
-@vindex gnus-group-toolbar
-The toolbar in the group buffer.
-
-@item gnus-summary-toolbar
-@vindex gnus-summary-toolbar
-The toolbar in the summary buffer.
+@lisp
+(message (horizontal 1.0
+ (vertical 1.0 (message 1.0 point))
+ (vertical 0.24
+ (if (buffer-live-p gnus-summary-buffer)
+ '(summary 0.5))
+ (group 1.0))))
+@end lisp
-@item gnus-summary-mail-toolbar
-@vindex gnus-summary-mail-toolbar
-The toolbar in the summary buffer of mail groups.
+One common desire for a multiple frame split is to have a separate frame
+for composing mail and news while leaving the original frame intact. To
+accomplish that, something like the following can be done:
-@end table
+@lisp
+(message
+ (frame 1.0
+ (if (not (buffer-live-p gnus-summary-buffer))
+ (car (cdr (assoc 'group gnus-buffer-configuration)))
+ (car (cdr (assoc 'summary gnus-buffer-configuration))))
+ (vertical ((user-position . t) (top . 1) (left . 1)
+ (name . "Message"))
+ (message 1.0 point))))
+@end lisp
+@findex gnus-add-configuration
+Since the @code{gnus-buffer-configuration} variable is so long and
+complicated, there's a function you can use to ease changing the config
+of a single setting: @code{gnus-add-configuration}. If, for instance,
+you want to change the @code{article} setting, you could say:
-@node XVarious
-@subsection Various XEmacs Variables
+@lisp
+(gnus-add-configuration
+ '(article (vertical 1.0
+ (group 4)
+ (summary .25 point)
+ (article 1.0))))
+@end lisp
-@table @code
-@item gnus-xmas-glyph-directory
-@vindex gnus-xmas-glyph-directory
-This is where Gnus will look for pictures. Gnus will normally
-auto-detect this directory, but you may set it manually if you have an
-unusual directory structure.
+You'd typically stick these @code{gnus-add-configuration} calls in your
+@file{.gnus.el} file or in some startup hook---they should be run after
+Gnus has been loaded.
-@item gnus-xmas-logo-color-alist
-@vindex gnus-xmas-logo-color-alist
-This is an alist where the key is a type symbol and the values are the
-foreground and background color of the splash page glyph.
+@vindex gnus-always-force-window-configuration
+If all windows mentioned in the configuration are already visible, Gnus
+won't change the window configuration. If you always want to force the
+``right'' window configuration, you can set
+@code{gnus-always-force-window-configuration} to non-@code{nil}.
-@item gnus-xmas-logo-color-style
-@vindex gnus-xmas-logo-color-style
-This is the key used to look up the color in the alist described above.
-Valid values include @code{flame}, @code{pine}, @code{moss},
-@code{irish}, @code{sky}, @code{tin}, @code{velvet}, @code{grape},
-@code{labia}, @code{berry}, @code{neutral}, and @code{september}.
+If you're using tree displays (@pxref{Tree Display}), and the tree
+window is displayed vertically next to another window, you may also want
+to fiddle with @code{gnus-tree-minimize-window} to avoid having the
+windows resized.
-@item gnus-xmas-modeline-glyph
-@vindex gnus-xmas-modeline-glyph
-A glyph displayed in all Gnus mode lines. It is a tiny gnu head by
-default.
+@subsection Example Window Configurations
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
+@itemize @bullet
+@item
+Narrow left hand side occupied by group buffer. Right hand side split
+between summary buffer (top one-sixth) and article buffer (bottom).
-@end table
+@ifinfo
+@example
++---+---------+
+| G | Summary |
+| r +---------+
+| o | |
+| u | Article |
+| p | |
++---+---------+
+@end example
+@end ifinfo
+@lisp
+(gnus-add-configuration
+ '(article
+ (horizontal 1.0
+ (vertical 25 (group 1.0))
+ (vertical 1.0
+ (summary 0.16 point)
+ (article 1.0)))))
+(gnus-add-configuration
+ '(summary
+ (horizontal 1.0
+ (vertical 25 (group 1.0))
+ (vertical 1.0 (summary 1.0 point)))))
+@end lisp
+@end itemize
-@node Fuzzy Matching
-@section Fuzzy Matching
-@cindex fuzzy matching
-Gnus provides @dfn{fuzzy matching} of @code{Subject} lines when doing
-things like scoring, thread gathering and thread comparison.
+@node Faces and Fonts
+@section Faces and Fonts
+@cindex faces
+@cindex fonts
+@cindex colors
-As opposed to regular expression matching, fuzzy matching is very fuzzy.
-It's so fuzzy that there's not even a definition of what @dfn{fuzziness}
-means, and the implementation has changed over time.
+Fiddling with fonts and faces used to be very difficult, but these days
+it is very simple. You simply say @kbd{M-x customize-face}, pick out
+the face you want to alter, and alter it via the standard Customize
+interface.
-Basically, it tries to remove all noise from lines before comparing.
-@samp{Re: }, parenthetical remarks, white space, and so on, are filtered
-out of the strings before comparing the results. This often leads to
-adequate results---even when faced with strings generated by text
-manglers masquerading as newsreaders.
+@node Compilation
+@section Compilation
+@cindex compilation
+@cindex byte-compilation
-@node Thwarting Email Spam
-@section Thwarting Email Spam
-@cindex email spam
-@cindex spam
-@cindex UCE
-@cindex unsolicited commercial email
+@findex gnus-compile
-In these last days of the Usenet, commercial vultures are hanging about
-and grepping through news like crazy to find email addresses they can
-foist off their scams and products to. As a reaction to this, many
-people have started putting nonsense addresses into their @code{From}
-lines. I think this is counterproductive---it makes it difficult for
-people to send you legitimate mail in response to things you write, as
-well as making it difficult to see who wrote what. This rewriting may
-perhaps be a bigger menace than the unsolicited commercial email itself
-in the end.
+Remember all those line format specification variables?
+@code{gnus-summary-line-format}, @code{gnus-group-line-format}, and so
+on. Now, Gnus will of course heed whatever these variables are, but,
+unfortunately, changing them will mean a quite significant slow-down.
+(The default values of these variables have byte-compiled functions
+associated with them, while the user-generated versions do not, of
+course.)
-The biggest problem I have with email spam is that it comes in under
-false pretenses. I press @kbd{g} and Gnus merrily informs me that I
-have 10 new emails. I say ``Golly gee! Happy is me!'' and select the
-mail group, only to find two pyramid schemes, seven advertisements
-(``New! Miracle tonic for growing full, lustrous hair on your toes!'')
-and one mail asking me to repent and find some god.
+To help with this, you can run @kbd{M-x gnus-compile} after you've
+fiddled around with the variables and feel that you're (kind of)
+satisfied. This will result in the new specs being byte-compiled, and
+you'll get top speed again. Gnus will save these compiled specs in the
+@file{.newsrc.eld} file. (User-defined functions aren't compiled by
+this function, though---you should compile them yourself by sticking
+them into the @file{.gnus.el} file and byte-compiling that file.)
-This is annoying.
-The way to deal with this is having Gnus split out all spam into a
-@samp{spam} mail group (@pxref{Splitting Mail}).
+@node Mode Lines
+@section Mode Lines
+@cindex mode lines
-First, pick one (1) valid mail address that you can be reached at, and
-put it in your @code{From} header of all your news articles. (I've
-chosen @samp{larsi@@trym.ifi.uio.no}, but for many addresses on the form
-@samp{larsi+usenet@@ifi.uio.no} will be a better choice. Ask your
-sysadm whether your sendmail installation accepts keywords in the local
-part of the mail address.)
+@vindex gnus-updated-mode-lines
+@code{gnus-updated-mode-lines} says what buffers should keep their mode
+lines updated. It is a list of symbols. Supported symbols include
+@code{group}, @code{article}, @code{summary}, @code{server},
+@code{browse}, and @code{tree}. If the corresponding symbol is present,
+Gnus will keep that mode line updated with information that may be
+pertinent. If this variable is @code{nil}, screen refresh may be
+quicker.
-@lisp
-(setq message-default-news-headers
- "From: Lars Magne Ingebrigtsen <larsi@@trym.ifi.uio.no>\n")
-@end lisp
+@cindex display-time
-Then put the following split rule in @code{nnmail-split-fancy}
-(@pxref{Fancy Mail Splitting}):
+@vindex gnus-mode-non-string-length
+By default, Gnus displays information on the current article in the mode
+lines of the summary and article buffers. The information Gnus wishes
+to display (e.g. the subject of the article) is often longer than the
+mode lines, and therefore have to be cut off at some point. The
+@code{gnus-mode-non-string-length} variable says how long the other
+elements on the line is (i.e., the non-info part). If you put
+additional elements on the mode line (e.g. a clock), you should modify
+this variable:
+@c Hook written by Francesco Potorti` <pot@cnuce.cnr.it>
@lisp
-(
- ...
- (to "larsi@@trym.ifi.uio.no"
- (| ("subject" "re:.*" "misc")
- ("references" ".*@@.*" "misc")
- "spam"))
- ...
-)
+(add-hook 'display-time-hook
+ (lambda () (setq gnus-mode-non-string-length
+ (+ 21
+ (if line-number-mode 5 0)
+ (if column-number-mode 4 0)
+ (length display-time-string)))))
@end lisp
-This says that all mail to this address is suspect, but if it has a
-@code{Subject} that starts with a @samp{Re:} or has a @code{References}
-header, it's probably ok. All the rest goes to the @samp{spam} group.
-(This idea probably comes from Tim Pierce.)
-
-In addition, many mail spammers talk directly to your @code{smtp} server
-and do not include your email address explicitly in the @code{To}
-header. Why they do this is unknown---perhaps it's to thwart this
-thwarting scheme? In any case, this is trivial to deal with---you just
-put anything not addressed to you in the @samp{spam} group by ending
-your fancy split rule in this way:
-
-@lisp
-(
- ...
- (to "larsi" "misc")
- "spam")
-@end lisp
+If this variable is @code{nil} (which is the default), the mode line
+strings won't be chopped off, and they won't be padded either. Note
+that the default is unlikely to be desirable, as even the percentage
+complete in the buffer may be crowded off the mode line; the user should
+configure this variable appropriately for her configuration.
-In my experience, this will sort virtually everything into the right
-group. You still have to check the @samp{spam} group from time to time to
-check for legitimate mail, though. If you feel like being a good net
-citizen, you can even send off complaints to the proper authorities on
-each unsolicited commercial email---at your leisure.
-If you are also a lazy net citizen, you will probably prefer complaining
-automatically with the @file{gnus-junk.el} package, available FOR FREE
-at @* @file{<URL:http://stud2.tuwien.ac.at/~e9426626/gnus-junk.html>}.
-Since most e-mail spam is sent automatically, this may reconcile the
-cosmic balance somewhat.
+@node Highlighting and Menus
+@section Highlighting and Menus
+@cindex visual
+@cindex highlighting
+@cindex menus
-This works for me. It allows people an easy way to contact me (they can
-just press @kbd{r} in the usual way), and I'm not bothered at all with
-spam. It's a win-win situation. Forging @code{From} headers to point
-to non-existent domains is yucky, in my opinion.
+@vindex gnus-visual
+The @code{gnus-visual} variable controls most of the Gnus-prettifying
+aspects. If @code{nil}, Gnus won't attempt to create menus or use fancy
+colors or fonts. This will also inhibit loading the @file{gnus-vis.el}
+file.
-
-@node Various Various
-@section Various Various
-@cindex mode lines
-@cindex highlights
+This variable can be a list of visual properties that are enabled. The
+following elements are valid, and are all included by default:
@table @code
+@item group-highlight
+Do highlights in the group buffer.
+@item summary-highlight
+Do highlights in the summary buffer.
+@item article-highlight
+Do highlights in the article buffer.
+@item highlight
+Turn on highlighting in all buffers.
+@item group-menu
+Create menus in the group buffer.
+@item summary-menu
+Create menus in the summary buffers.
+@item article-menu
+Create menus in the article buffer.
+@item browse-menu
+Create menus in the browse buffer.
+@item server-menu
+Create menus in the server buffer.
+@item score-menu
+Create menus in the score buffers.
+@item menu
+Create menus in all buffers.
+@end table
-@item gnus-home-directory
-All Gnus path variables will be initialized from this variable, which
-defaults to @file{~/}.
+So if you only want highlighting in the article buffer and menus in all
+buffers, you could say something like:
-@item gnus-directory
-@vindex gnus-directory
-Most Gnus storage path variables will be initialized from this variable,
-which defaults to the @samp{SAVEDIR} environment variable, or
-@file{~/News/} if that variable isn't set.
+@lisp
+(setq gnus-visual '(article-highlight menu))
+@end lisp
-Note that Gnus is mostly loaded when the @file{.gnus.el} file is read.
-This means that other directory variables that are initialized from this
-variable won't be set properly if you set this variable in
-@file{.gnus.el}. Set this variable in @file{.emacs} instead.
+If you want highlighting only and no menus whatsoever, you'd say:
-@item gnus-default-directory
-@vindex gnus-default-directory
-Not related to the above variable at all---this variable says what the
-default directory of all Gnus buffers should be. If you issue commands
-like @kbd{C-x C-f}, the prompt you'll get starts in the current buffer's
-default directory. If this variable is @code{nil} (which is the
-default), the default directory will be the default directory of the
-buffer you were in when you started Gnus.
+@lisp
+(setq gnus-visual '(highlight))
+@end lisp
-@item gnus-verbose
-@vindex gnus-verbose
-This variable is an integer between zero and ten. The higher the value,
-the more messages will be displayed. If this variable is zero, Gnus
-will never flash any messages, if it is seven (which is the default),
-most important messages will be shown, and if it is ten, Gnus won't ever
-shut up, but will flash so many messages it will make your head swim.
+If @code{gnus-visual} is @code{t}, highlighting and menus will be used
+in all Gnus buffers.
-@item gnus-verbose-backends
-@vindex gnus-verbose-backends
-This variable works the same way as @code{gnus-verbose}, but it applies
-to the Gnus backends instead of Gnus proper.
+Other general variables that influence the look of all buffers include:
-@item nnheader-max-head-length
-@vindex nnheader-max-head-length
-When the backends read straight heads of articles, they all try to read
-as little as possible. This variable (default 4096) specifies
-the absolute max length the backends will try to read before giving up
-on finding a separator line between the head and the body. If this
-variable is @code{nil}, there is no upper read bound. If it is
-@code{t}, the backends won't try to read the articles piece by piece,
-but read the entire articles. This makes sense with some versions of
-@code{ange-ftp} or @code{efs}.
+@table @code
+@item gnus-mouse-face
+@vindex gnus-mouse-face
+This is the face (i.e., font) used for mouse highlighting in Gnus. No
+mouse highlights will be done if @code{gnus-visual} is @code{nil}.
-@item nnheader-head-chop-length
-@vindex nnheader-head-chop-length
-This variable (default 2048) says how big a piece of each article to
-read when doing the operation described above.
+@end table
-@item nnheader-file-name-translation-alist
-@vindex nnheader-file-name-translation-alist
-@cindex file names
-@cindex invalid characters in file names
-@cindex characters in file names
-This is an alist that says how to translate characters in file names.
-For instance, if @samp{:} is invalid as a file character in file names
-on your system (you OS/2 user you), you could say something like:
+There are hooks associated with the creation of all the different menus:
-@lisp
-(setq nnheader-file-name-translation-alist
- '((?: . ?_)))
-@end lisp
+@table @code
-In fact, this is the default value for this variable on OS/2 and MS
-Windows (phooey) systems.
+@item gnus-article-menu-hook
+@vindex gnus-article-menu-hook
+Hook called after creating the article mode menu.
-@item gnus-hidden-properties
-@vindex gnus-hidden-properties
-This is a list of properties to use to hide ``invisible'' text. It is
-@code{(invisible t intangible t)} by default on most systems, which
-makes invisible text invisible and intangible.
+@item gnus-group-menu-hook
+@vindex gnus-group-menu-hook
+Hook called after creating the group mode menu.
-@item gnus-parse-headers-hook
-@vindex gnus-parse-headers-hook
-A hook called before parsing headers. It can be used, for instance, to
-gather statistics on the headers fetched, or perhaps you'd like to prune
-some headers. I don't see why you'd want that, though.
+@item gnus-summary-menu-hook
+@vindex gnus-summary-menu-hook
+Hook called after creating the summary mode menu.
-@item gnus-shell-command-separator
-@vindex gnus-shell-command-separator
-String used to separate two shell commands. The default is @samp{;}.
+@item gnus-server-menu-hook
+@vindex gnus-server-menu-hook
+Hook called after creating the server mode menu.
+
+@item gnus-browse-menu-hook
+@vindex gnus-browse-menu-hook
+Hook called after creating the browse mode menu.
+@item gnus-score-menu-hook
+@vindex gnus-score-menu-hook
+Hook called after creating the score mode menu.
@end table
-@node The End
-@chapter The End
+@node Buttons
+@section Buttons
+@cindex buttons
+@cindex mouse
+@cindex click
-Well, that's the manual---you can get on with your life now. Keep in
-touch. Say hello to your cats from me.
+Those new-fangled @dfn{mouse} contraptions is very popular with the
+young, hep kids who don't want to learn the proper way to do things
+these days. Why, I remember way back in the summer of '89, when I was
+using Emacs on a Tops 20 system. Three hundred users on one single
+machine, and every user was running Simula compilers. Bah!
-My @strong{ghod}---I just can't stand goodbyes. Sniffle.
+Right.
-Ol' Charles Reznikoff said it pretty well, so I leave the floor to him:
+@vindex gnus-carpal
+Well, you can make Gnus display bufferfuls of buttons you can click to
+do anything by setting @code{gnus-carpal} to @code{t}. Pretty simple,
+really. Tell the chiropractor I sent you.
-@quotation
-@strong{Te Deum}
-@sp 1
-Not because of victories @*
-I sing,@*
-having none,@*
-but for the common sunshine,@*
-the breeze,@*
-the largess of the spring.
+@table @code
-@sp 1
-Not for victory@*
-but for the day's work done@*
-as well as I was able;@*
-not for a seat upon the dais@*
-but at the common table.@*
-@end quotation
+@item gnus-carpal-mode-hook
+@vindex gnus-carpal-mode-hook
+Hook run in all carpal mode buffers.
+@item gnus-carpal-button-face
+@vindex gnus-carpal-button-face
+Face used on buttons.
-@node Appendices
-@chapter Appendices
+@item gnus-carpal-header-face
+@vindex gnus-carpal-header-face
+Face used on carpal buffer headers.
-@menu
-* History:: How Gnus got where it is today.
-* Terminology:: We use really difficult, like, words here.
-* Customization:: Tailoring Gnus to your needs.
-* Troubleshooting:: What you might try if things do not work.
-* Gnus Reference Guide:: Rilly, rilly technical stuff.
-* Emacs for Heathens:: A short introduction to Emacsian terms.
-* Frequently Asked Questions:: A question-and-answer session.
-@end menu
+@item gnus-carpal-group-buffer-buttons
+@vindex gnus-carpal-group-buffer-buttons
+Buttons in the group buffer.
+@item gnus-carpal-summary-buffer-buttons
+@vindex gnus-carpal-summary-buffer-buttons
+Buttons in the summary buffer.
-@node History
-@section History
+@item gnus-carpal-server-buffer-buttons
+@vindex gnus-carpal-server-buffer-buttons
+Buttons in the server buffer.
-@cindex history
-@sc{gnus} was written by Masanobu @sc{Umeda}. When autumn crept up in
-'94, Lars Magne Ingebrigtsen grew bored and decided to rewrite Gnus.
+@item gnus-carpal-browse-buffer-buttons
+@vindex gnus-carpal-browse-buffer-buttons
+Buttons in the browse buffer.
+@end table
-If you want to investigate the person responsible for this outrage, you
-can point your (feh!) web browser to
-@file{http://www.stud.ifi.uio.no/~larsi/}. This is also the primary
-distribution point for the new and spiffy versions of Gnus, and is known
-as The Site That Destroys Newsrcs And Drives People Mad.
+All the @code{buttons} variables are lists. The elements in these list
+are either cons cells where the @code{car} contains a text to be displayed and
+the @code{cdr} contains a function symbol, or a simple string.
-During the first extended alpha period of development, the new Gnus was
-called ``(ding) Gnus''. @dfn{(ding)} is, of course, short for
-@dfn{ding is not Gnus}, which is a total and utter lie, but who cares?
-(Besides, the ``Gnus'' in this abbreviation should probably be
-pronounced ``news'' as @sc{Umeda} intended, which makes it a more
-appropriate name, don't you think?)
-In any case, after spending all that energy on coming up with a new and
-spunky name, we decided that the name was @emph{too} spunky, so we
-renamed it back again to ``Gnus''. But in mixed case. ``Gnus'' vs.
-``@sc{gnus}''. New vs. old.
+@node Daemons
+@section Daemons
+@cindex demons
+@cindex daemons
-The first ``proper'' release of Gnus 5 was done in November 1995 when it
-was included in the Emacs 19.30 distribution (132 (ding) Gnus releases
-plus 15 Gnus 5.0 releases).
+Gnus, being larger than any program ever written (allegedly), does lots
+of strange stuff that you may wish to have done while you're not
+present. For instance, you may want it to check for new mail once in a
+while. Or you may want it to close down all connections to all servers
+when you leave Emacs idle. And stuff like that.
-In May 1996 the next Gnus generation (aka. ``September Gnus'' (after 99
-releases)) was released under the name ``Gnus 5.2'' (40 releases).
+Gnus will let you do stuff like that by defining various
+@dfn{handlers}. Each handler consists of three elements: A
+@var{function}, a @var{time}, and an @var{idle} parameter.
-On July 28th 1996 work on Red Gnus was begun, and it was released on
-January 25th 1997 (after 84 releases) as ``Gnus 5.4'' (67 releases).
+Here's an example of a handler that closes connections when Emacs has
+been idle for thirty minutes:
-On September 13th 1997, Quassia Gnus was started and lasted 37
-releases. If was released as ``Gnus 5.6 on March 8th 1998.
+@lisp
+(gnus-demon-close-connections nil 30)
+@end lisp
-If you happen upon a version of Gnus that has a prefixed name --
-``(ding) Gnus'', ``September Gnus'', ``Red Gnus'', ``Quassia Gnus'' --
-don't panic. Don't let it know that you're frightened. Back away.
-Slowly. Whatever you do, don't run. Walk away, calmly, until you're
-out of its reach. Find a proper released version of Gnus and snuggle up
-to that instead.
+Here's a handler that scans for PGP headers every hour when Emacs is
+idle:
-@menu
-* Why?:: What's the point of Gnus?
-* Compatibility:: Just how compatible is Gnus with @sc{gnus}?
-* Conformity:: Gnus tries to conform to all standards.
-* Emacsen:: Gnus can be run on a few modern Emacsen.
-* Gnus Development:: How Gnus is developed.
-* Contributors:: Oodles of people.
-* New Features:: Pointers to some of the new stuff in Gnus.
-* Newest Features:: Features so new that they haven't been written yet.
-@end menu
+@lisp
+(gnus-demon-scan-pgp 60 t)
+@end lisp
+This @var{time} parameter and than @var{idle} parameter work together
+in a strange, but wonderful fashion. Basically, if @var{idle} is
+@code{nil}, then the function will be called every @var{time} minutes.
-@node Why?
-@subsection Why?
+If @var{idle} is @code{t}, then the function will be called after
+@var{time} minutes only if Emacs is idle. So if Emacs is never idle,
+the function will never be called. But once Emacs goes idle, the
+function will be called every @var{time} minutes.
-What's the point of Gnus?
+If @var{idle} is a number and @var{time} is a number, the function will
+be called every @var{time} minutes only when Emacs has been idle for
+@var{idle} minutes.
-I want to provide a ``rad'', ``happening'', ``way cool'' and ``hep''
-newsreader, that lets you do anything you can think of. That was my
-original motivation, but while working on Gnus, it has become clear to
-me that this generation of newsreaders really belong in the stone age.
-Newsreaders haven't developed much since the infancy of the net. If the
-volume continues to rise with the current rate of increase, all current
-newsreaders will be pretty much useless. How do you deal with
-newsgroups that have thousands of new articles each day? How do you
-keep track of millions of people who post?
+If @var{idle} is a number and @var{time} is @code{nil}, the function
+will be called once every time Emacs has been idle for @var{idle}
+minutes.
-Gnus offers no real solutions to these questions, but I would very much
-like to see Gnus being used as a testing ground for new methods of
-reading and fetching news. Expanding on @sc{Umeda}-san's wise decision
-to separate the newsreader from the backends, Gnus now offers a simple
-interface for anybody who wants to write new backends for fetching mail
-and news from different sources. I have added hooks for customizations
-everywhere I could imagine it being useful. By doing so, I'm inviting
-every one of you to explore and invent.
+And if @var{time} is a string, it should look like @samp{07:31}, and
+the function will then be called once every day somewhere near that
+time. Modified by the @var{idle} parameter, of course.
-May Gnus never be complete. @kbd{C-u 100 M-x all-hail-emacs} and
-@kbd{C-u 100 M-x all-hail-xemacs}.
+@vindex gnus-demon-timestep
+(When I say ``minute'' here, I really mean @code{gnus-demon-timestep}
+seconds. This is 60 by default. If you change that variable,
+all the timings in the handlers will be affected.)
+So, if you want to add a handler, you could put something like this in
+your @file{.gnus.el} file:
-@node Compatibility
-@subsection Compatibility
+@findex gnus-demon-add-handler
+@lisp
+(gnus-demon-add-handler 'gnus-demon-close-connections 30 t)
+@end lisp
-@cindex compatibility
-Gnus was designed to be fully compatible with @sc{gnus}. Almost all key
-bindings have been kept. More key bindings have been added, of course,
-but only in one or two obscure cases have old bindings been changed.
+@findex gnus-demon-add-nocem
+@findex gnus-demon-add-scanmail
+@findex gnus-demon-add-rescan
+@findex gnus-demon-add-scan-timestamps
+@findex gnus-demon-add-disconnection
+Some ready-made functions to do this have been created:
+@code{gnus-demon-add-nocem}, @code{gnus-demon-add-disconnection},
+@code{gnus-demon-add-nntp-close-connection},
+@code{gnus-demon-add-scan-timestamps}, @code{gnus-demon-add-rescan}, and
+@code{gnus-demon-add-scanmail}. Just put those functions in your
+@file{.gnus.el} if you want those abilities.
-Our motto is:
-@quotation
-@cartouche
-@center In a cloud bones of steel.
-@end cartouche
-@end quotation
+@findex gnus-demon-init
+@findex gnus-demon-cancel
+@vindex gnus-demon-handlers
+If you add handlers to @code{gnus-demon-handlers} directly, you should
+run @code{gnus-demon-init} to make the changes take hold. To cancel all
+daemons, you can use the @code{gnus-demon-cancel} function.
-All commands have kept their names. Some internal functions have changed
-their names.
+Note that adding daemons can be pretty naughty if you over do it. Adding
+functions that scan all news and mail from all servers every two seconds
+is a sure-fire way of getting booted off any respectable system. So
+behave.
-The @code{gnus-uu} package has changed drastically. @xref{Decoding
-Articles}.
-One major compatibility question is the presence of several summary
-buffers. All variables relevant while reading a group are
-buffer-local to the summary buffer they belong in. Although many
-important variables have their values copied into their global
-counterparts whenever a command is executed in the summary buffer, this
-change might lead to incorrect values being used unless you are careful.
+@node NoCeM
+@section NoCeM
+@cindex nocem
+@cindex spam
-All code that relies on knowledge of @sc{gnus} internals will probably
-fail. To take two examples: Sorting @code{gnus-newsrc-alist} (or
-changing it in any way, as a matter of fact) is strictly verboten. Gnus
-maintains a hash table that points to the entries in this alist (which
-speeds up many functions), and changing the alist directly will lead to
-peculiar results.
+@dfn{Spamming} is posting the same article lots and lots of times.
+Spamming is bad. Spamming is evil.
-@cindex hilit19
-@cindex highlighting
-Old hilit19 code does not work at all. In fact, you should probably
-remove all hilit code from all Gnus hooks
-(@code{gnus-group-prepare-hook} and @code{gnus-summary-prepare-hook}).
-Gnus provides various integrated functions for highlighting. These are
-faster and more accurate. To make life easier for everybody, Gnus will
-by default remove all hilit calls from all hilit hooks. Uncleanliness!
-Away!
+Spamming is usually canceled within a day or so by various anti-spamming
+agencies. These agencies usually also send out @dfn{NoCeM} messages.
+NoCeM is pronounced ``no see-'em'', and means what the name
+implies---these are messages that make the offending articles, like, go
+away.
-Packages like @code{expire-kill} will no longer work. As a matter of
-fact, you should probably remove all old @sc{gnus} packages (and other
-code) when you start using Gnus. More likely than not, Gnus already
-does what you have written code to make @sc{gnus} do. (Snicker.)
+What use are these NoCeM messages if the articles are canceled anyway?
+Some sites do not honor cancel messages and some sites just honor cancels
+from a select few people. Then you may wish to make use of the NoCeM
+messages, which are distributed in the @samp{alt.nocem.misc} newsgroup.
-Even though old methods of doing things are still supported, only the
-new methods are documented in this manual. If you detect a new method of
-doing something while reading this manual, that does not mean you have
-to stop doing it the old way.
+Gnus can read and parse the messages in this group automatically, and
+this will make spam disappear.
-Gnus understands all @sc{gnus} startup files.
+There are some variables to customize, of course:
-@kindex M-x gnus-bug
-@findex gnus-bug
-@cindex reporting bugs
-@cindex bugs
-Overall, a casual user who hasn't written much code that depends on
-@sc{gnus} internals should suffer no problems. If problems occur,
-please let me know by issuing that magic command @kbd{M-x gnus-bug}.
+@table @code
+@item gnus-use-nocem
+@vindex gnus-use-nocem
+Set this variable to @code{t} to set the ball rolling. It is @code{nil}
+by default.
-@vindex gnus-bug-create-help-buffer
-If you are in the habit of sending bug reports @emph{very} often, you
-may find the helpful help buffer annoying after a while. If so, set
-@code{gnus-bug-create-help-buffer} to @code{nil} to avoid having it pop
-up at you.
+@item gnus-nocem-groups
+@vindex gnus-nocem-groups
+Gnus will look for NoCeM messages in the groups in this list. The
+default is @code{("news.lists.filters" "news.admin.net-abuse.bulletins"
+"alt.nocem.misc" "news.admin.net-abuse.announce")}.
+@item gnus-nocem-issuers
+@vindex gnus-nocem-issuers
+There are many people issuing NoCeM messages. This list says what
+people you want to listen to. The default is @code{("Automoose-1"
+"clewis@@ferret.ocunix.on.ca" "cosmo.roadkill" "SpamHippo"
+"hweede@@snafu.de")}; fine, upstanding citizens all of them.
-@node Conformity
-@subsection Conformity
+Known despammers that you can put in this list are listed at
+@uref{http://www.xs4all.nl/~rosalind/nocemreg/nocemreg.html}.
-No rebels without a clue here, ma'am. We conform to all standards known
-to (wo)man. Except for those standards and/or conventions we disagree
-with, of course.
+You do not have to heed NoCeM messages from all these people---just the
+ones you want to listen to. You also don't have to accept all NoCeM
+messages from the people you like. Each NoCeM message has a @dfn{type}
+header that gives the message a (more or less, usually less) rigorous
+definition. Common types are @samp{spam}, @samp{spew}, @samp{mmf},
+@samp{binary}, and @samp{troll}. To specify this, you have to use
+@code{(@var{issuer} @var{conditions} @dots{})} elements in the list.
+Each condition is either a string (which is a regexp that matches types
+you want to use) or a list on the form @code{(not @var{string})}, where
+@var{string} is a regexp that matches types you don't want to use.
-@table @strong
+For instance, if you want all NoCeM messages from Chris Lewis except his
+@samp{troll} messages, you'd say:
-@item RFC 822
-@cindex RFC 822
-There are no known breaches of this standard.
+@lisp
+("clewis@@ferret.ocunix.on.ca" ".*" (not "troll"))
+@end lisp
-@item RFC 1036
-@cindex RFC 1036
-There are no known breaches of this standard, either.
+On the other hand, if you just want nothing but his @samp{spam} and
+@samp{spew} messages, you'd say:
-@item Son-of-RFC 1036
-@cindex Son-of-RFC 1036
-We do have some breaches to this one.
+@lisp
+("clewis@@ferret.ocunix.on.ca" (not ".*") "spew" "spam")
+@end lisp
-@table @emph
+The specs are applied left-to-right.
-@item X-Newsreader
-@itemx User-Agent
-These are considered to be ``vanity headers'', while I consider them
-to be consumer information. After seeing so many badly formatted
-articles coming from @code{tin} and @code{Netscape} I know not to use
-either of those for posting articles. I would not have known that if
-it wasn't for the @code{X-Newsreader} header.
-@end table
-@item USEFOR
-@cindex USEFOR
-USEFOR is an IETF working group writing a successor to RFC 1036, based
-on Son-of-RFC 1036. They have produced a number of drafts proposing
-various changes to the format of news articles. The Gnus towers will
-look into implementing the changes when the draft is accepted as an RFC.
+@item gnus-nocem-verifyer
+@vindex gnus-nocem-verifyer
+@findex mc-verify
+This should be a function for verifying that the NoCeM issuer is who she
+says she is. The default is @code{mc-verify}, which is a Mailcrypt
+function. If this is too slow and you don't care for verification
+(which may be dangerous), you can set this variable to @code{nil}.
-@end table
+If you want signed NoCeM messages to be verified and unsigned messages
+not to be verified (but used anyway), you could do something like:
-If you ever notice Gnus acting non-compliant with regards to the texts
-mentioned above, don't hesitate to drop a note to Gnus Towers and let us
-know.
+@lisp
+(setq gnus-nocem-verifyer 'my-gnus-mc-verify)
+(defun my-gnus-mc-verify ()
+ (not (eq 'forged
+ (ignore-errors
+ (if (mc-verify)
+ t
+ 'forged)))))
+@end lisp
-@node Emacsen
-@subsection Emacsen
-@cindex Emacsen
-@cindex XEmacs
-@cindex Mule
-@cindex Emacs
+This might be dangerous, though.
-Gnus should work on :
+@item gnus-nocem-directory
+@vindex gnus-nocem-directory
+This is where Gnus will store its NoCeM cache files. The default is
+@file{~/News/NoCeM/}.
-@itemize @bullet
+@item gnus-nocem-expiry-wait
+@vindex gnus-nocem-expiry-wait
+The number of days before removing old NoCeM entries from the cache.
+The default is 15. If you make it shorter Gnus will be faster, but you
+might then see old spam.
-@item
-Emacs 20.3 and up.
+@item gnus-nocem-check-from
+@vindex gnus-nocem-check-from
+Non-@code{nil} means check for valid issuers in message bodies.
+Otherwise don't bother fetching articles unless their author matches a
+valid issuer; that is much faster if you are selective about the
+issuers.
-@item
-XEmacs 20.4 and up.
+@item gnus-nocem-check-article-limit
+@vindex gnus-nocem-check-article-limit
+If non-@code{nil}, the maximum number of articles to check in any NoCeM
+group. NoCeM groups can be huge and very slow to process.
-@end itemize
+@end table
-This Gnus version will absolutely not work on any Emacsen older than
-that. Not reliably, at least. Older versions of Gnus may work on older
-Emacs versions.
+Using NoCeM could potentially be a memory hog. If you have many living
+(i. e., subscribed or unsubscribed groups), your Emacs process will grow
+big. If this is a problem, you should kill off all (or most) of your
+unsubscribed groups (@pxref{Subscription Commands}).
-There are some vague differences between Gnus on the various
-platforms---XEmacs features more graphics (a logo and a toolbar)---but
-other than that, things should look pretty much the same under all
-Emacsen.
+@node Undo
+@section Undo
+@cindex undo
-@node Gnus Development
-@subsection Gnus Development
+It is very useful to be able to undo actions one has done. In normal
+Emacs buffers, it's easy enough---you just push the @code{undo} button.
+In Gnus buffers, however, it isn't that simple.
-Gnus is developed in a two-phased cycle. The first phase involves much
-discussion on the @samp{ding@@gnus.org} mailing list, where people
-propose changes and new features, post patches and new backends. This
-phase is called the @dfn{alpha} phase, since the Gnusae released in this
-phase are @dfn{alpha releases}, or (perhaps more commonly in other
-circles) @dfn{snapshots}. During this phase, Gnus is assumed to be
-unstable and should not be used by casual users. Gnus alpha releases
-have names like ``Red Gnus'' and ``Quassia Gnus''.
+The things Gnus displays in its buffer is of no value whatsoever to
+Gnus---it's all just data designed to look nice to the user.
+Killing a group in the group buffer with @kbd{C-k} makes the line
+disappear, but that's just a side-effect of the real action---the
+removal of the group in question from the internal Gnus structures.
+Undoing something like that can't be done by the normal Emacs
+@code{undo} function.
-After futzing around for 50-100 alpha releases, Gnus is declared
-@dfn{frozen}, and only bug fixes are applied. Gnus loses the prefix,
-and is called things like ``Gnus 5.6.32'' instead. Normal people are
-supposed to be able to use these, and these are mostly discussed on the
-@samp{gnu.emacs.gnus} newsgroup.
+Gnus tries to remedy this somewhat by keeping track of what the user
+does and coming up with actions that would reverse the actions the user
+takes. When the user then presses the @code{undo} key, Gnus will run
+the code to reverse the previous action, or the previous actions.
+However, not all actions are easily reversible, so Gnus currently offers
+a few key functions to be undoable. These include killing groups,
+yanking groups, and changing the list of read articles of groups.
+That's it, really. More functions may be added in the future, but each
+added function means an increase in data to be stored, so Gnus will
+never be totally undoable.
-@cindex Incoming*
-@vindex nnmail-delete-incoming
-Some variable defaults differ between alpha Gnusae and released Gnusae.
-In particular, @code{nnmail-delete-incoming} defaults to @code{nil} in
-alpha Gnusae and @code{t} in released Gnusae. This is to prevent
-lossage of mail if an alpha release hiccups while handling the mail.
+@findex gnus-undo-mode
+@vindex gnus-use-undo
+@findex gnus-undo
+The undoability is provided by the @code{gnus-undo-mode} minor mode. It
+is used if @code{gnus-use-undo} is non-@code{nil}, which is the
+default. The @kbd{C-M-_} key performs the @code{gnus-undo}
+command, which should feel kinda like the normal Emacs @code{undo}
+command.
-The division of discussion between the ding mailing list and the Gnus
-newsgroup is not purely based on publicity concerns. It's true that
-having people write about the horrible things that an alpha Gnus release
-can do (sometimes) in a public forum may scare people off, but more
-importantly, talking about new experimental features that have been
-introduced may confuse casual users. New features are frequently
-introduced, fiddled with, and judged to be found wanting, and then
-either discarded or totally rewritten. People reading the mailing list
-usually keep up with these rapid changes, whille people on the newsgroup
-can't be assumed to do so.
+@node Predicate Specifiers
+@section Predicate Specifiers
+@cindex predicate specifiers
+Some Gnus variables are @dfn{predicate specifiers}. This is a special
+form that allows flexible specification of predicates without having
+to type all that much.
-@node Contributors
-@subsection Contributors
-@cindex contributors
+These specifiers are lists consisting of functions, symbols and lists.
-The new Gnus version couldn't have been done without the help of all the
-people on the (ding) mailing list. Every day for over a year I have
-gotten billions of nice bug reports from them, filling me with joy,
-every single one of them. Smooches. The people on the list have been
-tried beyond endurance, what with my ``oh, that's a neat idea <type
-type>, yup, I'll release it right away <ship off> no wait, that doesn't
-work at all <type type>, yup, I'll ship that one off right away <ship
-off> no, wait, that absolutely does not work'' policy for releases.
-Micro$oft---bah. Amateurs. I'm @emph{much} worse. (Or is that
-``worser''? ``much worser''? ``worsest''?)
+Here's an example:
-I would like to take this opportunity to thank the Academy for... oops,
-wrong show.
+@lisp
+(or gnus-article-unseen-p
+ gnus-article-unread-p)
+@end lisp
-@itemize @bullet
+The available symbols are @code{or}, @code{and} and @code{not}. The
+functions all take one parameter.
-@item
-Masanobu @sc{Umeda}---the writer of the original @sc{gnus}.
+@findex gnus-make-predicate
+Internally, Gnus calls @code{gnus-make-predicate} on these specifiers
+to create a function that can be called. This input parameter to this
+function will be passed along to all the functions in the predicate
+specifier.
-@item
-Per Abrahamsen---custom, scoring, highlighting and @sc{soup} code (as
-well as numerous other things).
-@item
-Luis Fernandes---design and graphics.
+@node Moderation
+@section Moderation
+@cindex moderation
-@item
-Erik Naggum---help, ideas, support, code and stuff.
+If you are a moderator, you can use the @file{gnus-mdrtn.el} package.
+It is not included in the standard Gnus package. Write a mail to
+@samp{larsi@@gnus.org} and state what group you moderate, and you'll
+get a copy.
-@item
-Shenghuo Zhu---uudecode.el, mm-uu.el, rfc1843.el and many other things
-connected with @sc{mime} and other types of en/decoding.
+The moderation package is implemented as a minor mode for summary
+buffers. Put
-@item
-Wes Hardaker---@file{gnus-picon.el} and the manual section on
-@dfn{picons} (@pxref{Picons}).
+@lisp
+(add-hook 'gnus-summary-mode-hook 'gnus-moderate)
+@end lisp
-@item
-Kim-Minh Kaplan---further work on the picon code.
+in your @file{.gnus.el} file.
-@item
-Brad Miller---@file{gnus-gl.el} and the GroupLens manual section
-(@pxref{GroupLens}).
+If you are the moderator of @samp{rec.zoofle}, this is how it's
+supposed to work:
+@enumerate
@item
-Sudish Joseph---innumerable bug fixes.
+You split your incoming mail by matching on
+@samp{Newsgroups:.*rec.zoofle}, which will put all the to-be-posted
+articles in some mail group---for instance, @samp{nnml:rec.zoofle}.
@item
-Ilja Weis---@file{gnus-topic.el}.
+You enter that group once in a while and post articles using the @kbd{e}
+(edit-and-post) or @kbd{s} (just send unedited) commands.
@item
-Steven L. Baur---lots and lots and lots of bugs detections and fixes.
+If, while reading the @samp{rec.zoofle} newsgroup, you happen upon some
+articles that weren't approved by you, you can cancel them with the
+@kbd{c} command.
+@end enumerate
-@item
-Vladimir Alexiev---the refcard and reference booklets.
+To use moderation mode in these two groups, say:
-@item
-Felix Lee & Jamie Zawinski---I stole some pieces from the XGnus
-distribution by Felix Lee and JWZ.
+@lisp
+(setq gnus-moderated-list
+ "^nnml:rec.zoofle$\\|^rec.zoofle$")
+@end lisp
-@item
-Scott Byer---@file{nnfolder.el} enhancements & rewrite.
-@item
-Peter Mutsaers---orphan article scoring code.
+@node Image Enhancements
+@section Image Enhancements
-@item
-Ken Raeburn---POP mail support.
+XEmacs, as well as Emacs 21, is able to display pictures and stuff, so
+Gnus has taken advantage of that.
-@item
-Hallvard B Furuseth---various bits and pieces, especially dealing with
-.newsrc files.
+@menu
+* Picons:: How to display pictures of what you're reading.
+* Smileys:: Show all those happy faces the way they were meant to be shown.
+* X-Face:: Display a funky, teensy black-and-white image.
+* Toolbar:: Click'n'drool.
+* XVarious:: Other XEmacsy Gnusey variables.
+@end menu
-@item
-Brian Edmonds---@file{gnus-bbdb.el}.
-@item
-David Moore---rewrite of @file{nnvirtual.el} and many other things.
+@node Picons
+@subsection Picons
-@item
-Kevin Davidson---came up with the name @dfn{ding}, so blame him.
+@iftex
+@iflatex
+\include{picons}
+@end iflatex
+@end iftex
-@item
-François Pinard---many, many interesting and thorough bug reports, as
-well as autoconf support.
+So@dots{} You want to slow down your news reader even more! This is a
+good way to do so. Its also a great way to impress people staring
+over your shoulder as you read news.
-@end itemize
+@menu
+* Picon Basics:: What are picons and How do I get them.
+* Picon Requirements:: Don't go further if you aren't using XEmacs.
+* Easy Picons:: Displaying Picons---the easy way.
+* Hard Picons:: The way you should do it. You'll learn something.
+* Picon Useless Configuration:: Other variables you can trash/tweak/munge/play with.
+@end menu
-This manual was proof-read by Adrian Aichner, with Ricardo Nassif, Mark
-Borges, and Jost Krieger proof-reading parts of the manual.
-The following people have contributed many patches and suggestions:
+@node Picon Basics
+@subsubsection Picon Basics
-Christopher Davis,
-Andrew Eskilsson,
-Kai Grossjohann,
-David Kågedal,
-Richard Pieri,
-Fabrice Popineau,
-Daniel Quinlan,
-Jason L. Tibbitts, III,
-and
-Jack Vinson.
+What are Picons? To quote directly from the Picons Web site:
-Also thanks to the following for patches and stuff:
+@iftex
+@iflatex
+\margindex{}
+@end iflatex
+@end iftex
-Jari Aalto,
-Adrian Aichner,
-Vladimir Alexiev,
-Russ Allbery,
-Peter Arius,
-Matt Armstrong,
-Marc Auslander,
-Miles Bader,
-Frank Bennett,
-Robert Bihlmeyer,
-Chris Bone,
-Mark Borges,
-Mark Boyns,
-Lance A. Brown,
-Kees de Bruin,
-Martin Buchholz,
-Joe Buehler,
-Kevin Buhr,
-Alastair Burt,
-Joao Cachopo,
-Zlatko Calusic,
-Massimo Campostrini,
-Castor,
-David Charlap,
-Dan Christensen,
-Kevin Christian,
-Michael R. Cook,
-Glenn Coombs,
-Frank D. Cringle,
-Geoffrey T. Dairiki,
-Andre Deparade,
-Ulrik Dickow,
-Dave Disser,
-Rui-Tao Dong, @c ?
-Joev Dubach,
-Michael Welsh Duggan,
-Dave Edmondson,
-Paul Eggert,
-Karl Eichwalder,
-Enami Tsugutomo, @c Enami
-Michael Ernst,
-Luc Van Eycken,
-Sam Falkner,
-Nelson Jose dos Santos Ferreira,
-Sigbjorn Finne,
-Paul Fisher,
-Decklin Foster,
-Gary D. Foster,
-Paul Franklin,
-Guy Geens,
-Arne Georg Gleditsch,
-David S. Goldberg,
-Michelangelo Grigni,
-Dale Hagglund,
-D. Hall,
-Magnus Hammerin,
-Kenichi Handa, @c Handa
-Raja R. Harinath,
-Yoshiki Hayashi, @c ?
-P. E. Jareth Hein,
-Hisashige Kenji, @c Hisashige
-Marc Horowitz,
-Gunnar Horrigmo,
-Richard Hoskins,
-Brad Howes,
-François Felix Ingrand,
-Ishikawa Ichiro, @c Ishikawa
-Lee Iverson,
-Iwamuro Motonori, @c Iwamuro
-Rajappa Iyer,
-Andreas Jaeger,
-Randell Jesup,
-Fred Johansen,
-Gareth Jones,
-Simon Josefsson,
-Greg Klanderman,
-Karl Kleinpaste,
-Peter Skov Knudsen,
-Shuhei Kobayashi, @c Kobayashi
-Koseki Yoshinori, @c Koseki
-Thor Kristoffersen,
-Jens Lautenbacher,
-Martin Larose,
-Seokchan Lee, @c Lee
-Joerg Lenneis,
-Carsten Leonhardt,
-James LewisMoss,
-Christian Limpach,
-Markus Linnala,
-Dave Love,
-Mike McEwan,
-Tonny Madsen,
-Shlomo Mahlab,
-Nat Makarevitch,
-Istvan Marko,
-David Martin,
-Jason R. Mastaler,
-Gordon Matzigkeit,
-Timo Metzemakers,
-Richard Mlynarik,
-Lantz Moore,
-Morioka Tomohiko, @c Morioka
-Erik Toubro Nielsen,
-Hrvoje Niksic,
-Andy Norman,
-Fred Oberhauser,
-C. R. Oldham,
-Alexandre Oliva,
-Ken Olstad,
-Masaharu Onishi, @c Onishi
-Hideki Ono, @c Ono
-William Perry,
-Stephen Peters,
-Jens-Ulrik Holger Petersen,
-Ulrich Pfeifer,
-Matt Pharr,
-Andy Piper,
-John McClary Prevost,
-Bill Pringlemeir,
-Mike Pullen,
-Jim Radford,
-Colin Rafferty,
-Lasse Rasinen,
-Lars Balker Rasmussen,
-Joe Reiss,
-Renaud Rioboo,
-Roland B. Roberts,
-Bart Robinson,
-Christian von Roques,
-Markus Rost,
-Jason Rumney,
-Wolfgang Rupprecht,
-Jay Sachs,
-Dewey M. Sasser,
-Conrad Sauerwald,
-Loren Schall,
-Dan Schmidt,
-Ralph Schleicher,
-Philippe Schnoebelen,
-Andreas Schwab,
-Randal L. Schwartz,
-Justin Sheehy,
-Danny Siu,
-Matt Simmons,
-Paul D. Smith,
-Jeff Sparkes,
-Toby Speight,
-Michael Sperber,
-Darren Stalder,
-Richard Stallman,
-Greg Stark,
-Sam Steingold,
-Jonas Steverud,
-Paul Stodghill,
-Kurt Swanson,
-Samuel Tardieu,
-Teddy,
-Chuck Thompson,
-Philippe Troin,
-James Troup,
-Trung Tran-Duc,
-Aaron M. Ucko,
-Aki Vehtari,
-Didier Verna,
-Jan Vroonhof,
-Stefan Waldherr,
-Pete Ware,
-Barry A. Warsaw,
-Christoph Wedler,
-Joe Wells,
-Lee Willis,
-Katsumi Yamaoka @c Yamaoka
-and
-Lloyd Zusman.
+@quotation
+@dfn{Picons} is short for ``personal icons''. They're small,
+constrained images used to represent users and domains on the net,
+organized into databases so that the appropriate image for a given
+e-mail address can be found. Besides users and domains, there are picon
+databases for Usenet newsgroups and weather forecasts. The picons are
+in either monochrome @code{XBM} format or color @code{XPM} and
+@code{GIF} formats.
+@end quotation
+@vindex gnus-picons-piconsearch-url
+If you have a permanent connection to the Internet you can use Steve
+Kinzler's Picons Search engine by setting
+@code{gnus-picons-piconsearch-url} to the string @*
+@uref{http://www.cs.indiana.edu/picons/search.html}.
-For a full overview of what each person has done, the ChangeLogs
-included in the Gnus alpha distributions should give ample reading
-(550kB and counting).
+@vindex gnus-picons-database
+Otherwise you need a local copy of his database. For instructions on
+obtaining and installing the picons databases, point your Web browser at @*
+@uref{http://www.cs.indiana.edu/picons/ftp/index.html}. Gnus expects
+picons to be installed into a location pointed to by
+@code{gnus-picons-database}.
-Apologies to everybody that I've forgotten, of which there are many, I'm
-sure.
+If you are using Debian GNU/Linux, saying @samp{apt-get install
+picons.*} will install the picons where Gnus can find them.
-Gee, that's quite a list of people. I guess that must mean that there
-actually are people who are using Gnus. Who'd'a thunk it!
+@node Picon Requirements
+@subsubsection Picon Requirements
-@node New Features
-@subsection New Features
-@cindex new features
+To have Gnus display Picons for you, you must have @code{x} support
+compiled into XEmacs. To display color picons which are much nicer
+than the black & white one, you also need one of @code{xpm} or
+@code{gif} compiled into XEmacs.
-@menu
-* ding Gnus:: New things in Gnus 5.0/5.1, the first new Gnus.
-* September Gnus:: The Thing Formally Known As Gnus 5.3/5.3.
-* Red Gnus:: Third time best---Gnus 5.4/5.5.
-* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
-@end menu
+@vindex gnus-picons-convert-x-face
+If you want to display faces from @code{X-Face} headers, you should have
+the @code{xface} support compiled into XEmacs. Otherwise you must have
+the @code{netpbm} utilities installed, or munge the
+@code{gnus-picons-convert-x-face} variable to use something else.
+(NOTE: @code{x-face} is used in the variable name, not @code{xface})
-These lists are, of course, just @emph{short} overviews of the
-@emph{most} important new features. No, really. There are tons more.
-Yes, we have feeping creaturism in full effect.
+@node Easy Picons
+@subsubsection Easy Picons
+To enable displaying picons, simply put the following line in your
+@file{~/.gnus} file and start Gnus.
-@node ding Gnus
-@subsubsection (ding) Gnus
+@lisp
+(setq gnus-use-picons t)
+(setq gnus-treat-display-picons t)
+@end lisp
-New features in Gnus 5.0/5.1:
+and make sure @code{gnus-picons-database} points to the directory
+containing the Picons databases.
-@itemize @bullet
+Alternatively if you want to use the web piconsearch engine add this:
-@item
-The look of all buffers can be changed by setting format-like variables
-(@pxref{Group Buffer Format} and @pxref{Summary Buffer Format}).
+@lisp
+(setq gnus-picons-piconsearch-url
+ "http://www.cs.indiana.edu:800/piconsearch")
+@end lisp
-@item
-Local spool and several @sc{nntp} servers can be used at once
-(@pxref{Select Methods}).
-@item
-You can combine groups into virtual groups (@pxref{Virtual Groups}).
+@node Hard Picons
+@subsubsection Hard Picons
-@item
-You can read a number of different mail formats (@pxref{Getting Mail}).
-All the mail backends implement a convenient mail expiry scheme
-(@pxref{Expiring Mail}).
+@iftex
+@iflatex
+\margindex{}
+@end iflatex
+@end iftex
-@item
-Gnus can use various strategies for gathering threads that have lost
-their roots (thereby gathering loose sub-threads into one thread) or it
-can go back and retrieve enough headers to build a complete thread
-(@pxref{Customizing Threading}).
+Gnus can display picons for you as you enter and leave groups and
+articles. It knows how to interact with three sections of the picons
+database. Namely, it can display the picons newsgroup pictures,
+author's face picture(s), and the authors domain. To enable this
+feature, you need to select where to get the picons from, and where to
+display them.
-@item
-Killed groups can be displayed in the group buffer, and you can read
-them as well (@pxref{Listing Groups}).
+@table @code
-@item
-Gnus can do partial group updates---you do not have to retrieve the
-entire active file just to check for new articles in a few groups
-(@pxref{The Active File}).
+@item gnus-picons-database
+@vindex gnus-picons-database
+The location of the picons database. Should point to a directory
+containing the @file{news}, @file{domains}, @file{users} (and so on)
+subdirectories. This is only useful if
+@code{gnus-picons-piconsearch-url} is @code{nil}. Defaults to
+@file{/usr/local/faces/}.
-@item
-Gnus implements a sliding scale of subscribedness to groups
-(@pxref{Group Levels}).
+@item gnus-picons-piconsearch-url
+@vindex gnus-picons-piconsearch-url
+The URL for the web picons search engine. The only currently known
+engine is @uref{http://www.cs.indiana.edu:800/piconsearch}. To
+workaround network delays, icons will be fetched in the background. If
+this is @code{nil} 'the default), then picons are fetched from local
+database indicated by @code{gnus-picons-database}.
-@item
-You can score articles according to any number of criteria
-(@pxref{Scoring}). You can even get Gnus to find out how to score
-articles for you (@pxref{Adaptive Scoring}).
+@item gnus-picons-display-where
+@vindex gnus-picons-display-where
+Where the picon images should be displayed. It is @code{picons} by
+default (which by default maps to the buffer @samp{*Picons*}). Other
+valid places could be @code{article}, @code{summary}, or
+@samp{*scratch*} for all I care. Just make sure that you've made the
+buffer visible using the standard Gnus window configuration
+routines---@pxref{Window Layout}.
-@item
-Gnus maintains a dribble buffer that is auto-saved the normal Emacs
-manner, so it should be difficult to lose much data on what you have
-read if your machine should go down (@pxref{Auto Save}).
+@item gnus-picons-group-excluded-groups
+@vindex gnus-picons-group-excluded-groups
+Groups that are matched by this regexp won't have their group icons
+displayed.
-@item
-Gnus now has its own startup file (@file{.gnus}) to avoid cluttering up
-the @file{.emacs} file.
+@end table
-@item
-You can set the process mark on both groups and articles and perform
-operations on all the marked items (@pxref{Process/Prefix}).
+Note: If you set @code{gnus-use-picons} to @code{t}, it will set up your
+window configuration for you to include the @code{picons} buffer.
-@item
-You can grep through a subset of groups and create a group from the
-results (@pxref{Kibozed Groups}).
+Now that you've made those decision, you need to add the following
+functions to the appropriate hooks so these pictures will get displayed
+at the right time.
-@item
-You can list subsets of groups according to, well, anything
-(@pxref{Listing Groups}).
+@vindex gnus-picons-display-where
+@table @code
+@item gnus-article-display-picons
+@findex gnus-article-display-picons
+Looks up and displays the picons for the author and the author's domain
+in the @code{gnus-picons-display-where} buffer.
-@item
-You can browse foreign servers and subscribe to groups from those
-servers (@pxref{Browse Foreign Server}).
+@item gnus-picons-article-display-x-face
+@findex gnus-picons-article-display-x-face
+Decodes and displays the X-Face header if present.
+(NOTE: @code{x-face} is used in the function name, not @code{xface})
-@item
-Gnus can fetch articles, asynchronously, on a second connection to the
-server (@pxref{Asynchronous Fetching}).
+@end table
-@item
-You can cache articles locally (@pxref{Article Caching}).
-@item
-The uudecode functions have been expanded and generalized
-(@pxref{Decoding Articles}).
-@item
-You can still post uuencoded articles, which was a little-known feature
-of @sc{gnus}' past (@pxref{Uuencoding and Posting}).
+@node Picon Useless Configuration
+@subsubsection Picon Useless Configuration
-@item
-Fetching parents (and other articles) now actually works without
-glitches (@pxref{Finding the Parent}).
+@iftex
+@iflatex
+\margindex{}
+@end iflatex
+@end iftex
-@item
-Gnus can fetch FAQs and group descriptions (@pxref{Group Information}).
+The following variables offer further control over how things are
+done, where things are located, and other useless stuff you really
+don't need to worry about.
-@item
-Digests (and other files) can be used as the basis for groups
-(@pxref{Document Groups}).
+@table @code
-@item
-Articles can be highlighted and customized (@pxref{Customizing
-Articles}).
+@item gnus-picons-news-directories
+@vindex gnus-picons-news-directories
+List of subdirectories to search in @code{gnus-picons-database} for
+newsgroups faces. @code{("news")} is the default.
-@item
-URLs and other external references can be buttonized (@pxref{Article
-Buttons}).
+@item gnus-picons-user-directories
+@vindex gnus-picons-user-directories
+List of subdirectories to search in @code{gnus-picons-database} for user
+faces. @code{("local" "users" "usenix" "misc")} is the default.
-@item
-You can do lots of strange stuff with the Gnus window & frame
-configuration (@pxref{Windows Configuration}).
+@item gnus-picons-domain-directories
+@vindex gnus-picons-domain-directories
+List of subdirectories to search in @code{gnus-picons-database} for
+domain name faces. Defaults to @code{("domains")}. Some people may
+want to add @samp{"unknown"} to this list.
-@item
-You can click on buttons instead of using the keyboard
-(@pxref{Buttons}).
+@item gnus-picons-convert-x-face
+@vindex gnus-picons-convert-x-face
+If you don't have @code{xface} support builtin XEmacs, this is the
+command to use to convert the @code{X-Face} header to an X bitmap
+(@code{xbm}). Defaults to @code{(format "@{ echo '/* Width=48,
+Height=48 */'; uncompface; @} | icontopbm | pbmtoxbm > %s"
+gnus-picons-x-face-file-name)}
+(NOTE: @code{x-face} is used in the variable name, not @code{xface})
-@end itemize
+@item gnus-picons-x-face-file-name
+@vindex gnus-picons-x-face-file-name
+Names a temporary file to store the @code{X-Face} bitmap in. Defaults
+to @code{(format "/tmp/picon-xface.%s.xbm" (user-login-name))}.
+(NOTE: @code{x-face} is used in the variable name, not @code{xface})
+
+@item gnus-picons-has-modeline-p
+@vindex gnus-picons-has-modeline-p
+If you have set @code{gnus-picons-display-where} to @code{picons}, your
+XEmacs frame will become really cluttered. To alleviate this a bit you
+can set @code{gnus-picons-has-modeline-p} to @code{nil}; this will
+remove the mode line from the Picons buffer. This is only useful if
+@code{gnus-picons-display-where} is @code{picons}.
+
+@item gnus-picons-refresh-before-display
+@vindex gnus-picons-refresh-before-display
+If non-nil, display the article buffer before computing the picons.
+Defaults to @code{nil}.
+@item gnus-picons-display-as-address
+@vindex gnus-picons-display-as-address
+If @code{t} display textual email addresses along with pictures.
+Defaults to @code{t}.
-@node September Gnus
-@subsubsection September Gnus
+@item gnus-picons-file-suffixes
+@vindex gnus-picons-file-suffixes
+Ordered list of suffixes on picon file names to try. Defaults to
+@code{("xpm" "gif" "xbm")} minus those not builtin your XEmacs.
+
+@item gnus-picons-setup-hook
+@vindex gnus-picons-setup-hook
+Hook run in the picon buffer, if that is displayed.
+
+@item gnus-picons-display-article-move-p
+@vindex gnus-picons-display-article-move-p
+Whether to move point to first empty line when displaying picons. This
+has only an effect if `gnus-picons-display-where' has value `article'.
+
+If @code{nil}, display the picons in the @code{From} and
+@code{Newsgroups} lines. This is the default.
+
+@item gnus-picons-clear-cache-on-shutdown
+@vindex gnus-picons-clear-cache-on-shutdown
+Whether to clear the picons cache when exiting gnus. Gnus caches every
+picons it finds while it is running. This saves some time in the search
+process but eats some memory. If this variable is set to @code{nil},
+Gnus will never clear the cache itself; you will have to manually call
+@code{gnus-picons-clear-cache} to clear it. Otherwise the cache will be
+cleared every time you exit Gnus. Defaults to @code{t}.
@iftex
@iflatex
-\gnusfig{-28cm}{0cm}{\epsfig{figure=tmp/september.ps,height=20cm}}
+\margindex{}
@end iflatex
@end iftex
-New features in Gnus 5.2/5.3:
+@end table
-@itemize @bullet
+@node Smileys
+@subsection Smileys
+@cindex smileys
-@item
-A new message composition mode is used. All old customization variables
-for @code{mail-mode}, @code{rnews-reply-mode} and @code{gnus-msg} are
-now obsolete.
+@iftex
+@iflatex
+\gnusfig{-3cm}{0.5cm}{\epsfig{figure=ps/BigFace,height=20cm}}
+\input{smiley}
+@end iflatex
+@end iftex
-@item
-Gnus is now able to generate @dfn{sparse} threads---threads where
-missing articles are represented by empty nodes (@pxref{Customizing
-Threading}).
+@dfn{Smiley} is a package separate from Gnus, but since Gnus is
+currently the only package that uses Smiley, it is documented here.
+
+In short---to use Smiley in Gnus, put the following in your
+@file{.gnus.el} file:
@lisp
-(setq gnus-build-sparse-threads 'some)
+(setq gnus-treat-display-smileys t)
@end lisp
-@item
-Outgoing articles are stored on a special archive server
-(@pxref{Archived Messages}).
+Smiley maps text smiley faces---@samp{:-)}, @samp{:-=}, @samp{:-(} and
+the like---to pictures and displays those instead of the text smiley
+faces. The conversion is controlled by a list of regexps that matches
+text and maps that to file names.
-@item
-Partial thread regeneration now happens when articles are
-referred.
+@vindex smiley-nosey-regexp-alist
+@vindex smiley-deformed-regexp-alist
+Smiley supplies two example conversion alists by default:
+@code{smiley-deformed-regexp-alist} (which matches @samp{:)}, @samp{:(}
+and so on), and @code{smiley-nosey-regexp-alist} (which matches
+@samp{:-)}, @samp{:-(} and so on).
-@item
-Gnus can make use of GroupLens predictions (@pxref{GroupLens}).
+The alist used is specified by the @code{smiley-regexp-alist} variable,
+which defaults to the value of @code{smiley-deformed-regexp-alist}.
-@item
-Picons (personal icons) can be displayed under XEmacs (@pxref{Picons}).
+The first item in each element is the regexp to be matched; the second
+element is the regexp match group that is to be replaced by the picture;
+and the third element is the name of the file to be displayed.
-@item
-A @code{trn}-like tree buffer can be displayed (@pxref{Tree Display}).
+The following variables customize where Smiley will look for these
+files, as well as the color to be used and stuff:
-@lisp
-(setq gnus-use-trees t)
-@end lisp
+@table @code
-@item
-An @code{nn}-like pick-and-read minor mode is available for the summary
-buffers (@pxref{Pick and Read}).
+@item smiley-data-directory
+@vindex smiley-data-directory
+Where Smiley will look for smiley faces files.
-@lisp
-(add-hook 'gnus-summary-mode-hook 'gnus-pick-mode)
-@end lisp
+@item smiley-flesh-color
+@vindex smiley-flesh-color
+Skin color. The default is @samp{yellow}, which is really racist.
-@item
-In binary groups you can use a special binary minor mode (@pxref{Binary
-Groups}).
+@item smiley-features-color
+@vindex smiley-features-color
+Color of the features of the face. The default is @samp{black}.
-@item
-Groups can be grouped in a folding topic hierarchy (@pxref{Group
-Topics}).
+@item smiley-tongue-color
+@vindex smiley-tongue-color
+Color of the tongue. The default is @samp{red}.
-@lisp
-(add-hook 'gnus-group-mode-hook 'gnus-topic-mode)
-@end lisp
+@item smiley-circle-color
+@vindex smiley-circle-color
+Color of the circle around the face. The default is @samp{black}.
-@item
-Gnus can re-send and bounce mail (@pxref{Summary Mail Commands}).
+@item smiley-mouse-face
+@vindex smiley-mouse-face
+Face used for mouse highlighting over the smiley face.
-@item
-Groups can now have a score, and bubbling based on entry frequency
-is possible (@pxref{Group Score}).
+@end table
-@lisp
-(add-hook 'gnus-summary-exit-hook 'gnus-summary-bubble-group)
-@end lisp
-@item
-Groups can be process-marked, and commands can be performed on
-groups of groups (@pxref{Marking Groups}).
+@node X-Face
+@subsection X-Face
+@cindex x-face
-@item
-Caching is possible in virtual groups.
+@code{X-Face} headers describe a 48x48 pixel black-and-white (1 bit
+depth) image that's supposed to represent the author of the message.
+It seems to be supported by an ever-growing number of mail and news
+readers.
-@item
-@code{nndoc} now understands all kinds of digests, mail boxes, rnews
-news batches, ClariNet briefs collections, and just about everything
-else (@pxref{Document Groups}).
+@cindex x-face
+@findex gnus-article-display-x-face
+@findex gnus-article-x-face-command
+@vindex gnus-article-x-face-command
+@vindex gnus-article-x-face-too-ugly
+@iftex
+@iflatex
+\include{xface}
+@end iflatex
+@end iftex
+@c @anchor{X-Face}
+
+Decoding an @code{X-Face} header either requires an Emacs that has
+@samp{compface} support (which most XEmacs versions has), or that you
+have @samp{compface} installed on your system. If either is true,
+Gnus will default to displaying @code{X-Face} headers.
+
+The variable that controls this is the
+@code{gnus-article-x-face-command} variable. If this variable is a
+string, this string will be executed in a sub-shell. If it is a
+function, this function will be called with the face as the argument.
+If the @code{gnus-article-x-face-too-ugly} (which is a regexp) matches
+the @code{From} header, the face will not be shown.
+
+The default action under Emacs 20 is to fork off the @code{display}
+program@footnote{@code{display} is from the ImageMagick package. For
+the @code{uncompface} and @code{icontopbm} programs look for a package
+like @code{compface} or @code{faces-xface} on a GNU/Linux system.} to
+view the face.
+
+Under XEmacs or Emacs 21+ with suitable image support, the default
+action is to display the face before the @code{From} header. (It's
+nicer if XEmacs has been compiled with @code{X-Face} support---that
+will make display somewhat faster. If there's no native @code{X-Face}
+support, Gnus will try to convert the @code{X-Face} header using
+external programs from the @code{pbmplus} package and
+friends.@footnote{On a GNU/Linux system look for packages with names
+like @code{netpbm}, @code{libgr-progs} and @code{compface}.})
+
+(NOTE: @code{x-face} is used in the variable/function names, not
+@code{xface}).
+
+Gnus provides a few convenience functions and variables to allow
+easier insertion of X-Face headers in outgoing messages.
+
+@findex gnus-random-x-face
+@code{gnus-random-x-face} goes through all the @samp{pbm} files in
+@code{gnus-x-face-directory} and picks one at random, and then
+converts it to the X-Face format by using the
+@code{gnus-convert-pbm-to-x-face-command} shell command. The
+@samp{pbm} files should be 48x48 pixels big. It returns the X-Face
+header data as a string.
+
+@findex gnus-insert-random-x-face-header
+@code{gnus-insert-random-x-face-header} calls
+@code{gnus-random-x-face} and inserts a @samp{X-Face} header with the
+randomly generated data.
+
+@findex gnus-x-face-from-file
+@code{gnus-x-face-from-file} takes a GIF file as the parameter, and then
+converts the file to X-Face format by using the
+@code{gnus-convert-image-to-x-face-command} shell command.
+
+Here's how you would typically use the first function. Put something
+like the following in your @file{.gnus.el} file:
-@item
-Gnus has a new backend (@code{nnsoup}) to create/read SOUP packets
-(@pxref{SOUP}).
+@lisp
+(setq message-required-news-headers
+ (nconc message-required-news-headers
+ (list '(X-Face . gnus-random-x-face))))
+@end lisp
-@item
-The Gnus cache is much faster.
+Using the last function would be something like this:
-@item
-Groups can be sorted according to many criteria (@pxref{Sorting
-Groups}).
+@lisp
+(setq message-required-news-headers
+ (nconc message-required-news-headers
+ (list '(X-Face . (lambda ()
+ (gnus-x-face-from-file
+ "~/My-face.gif"))))))
+@end lisp
-@item
-New group parameters have been introduced to set list-addresses and
-expiry times (@pxref{Group Parameters}).
-@item
-All formatting specs allow specifying faces to be used
-(@pxref{Formatting Fonts}).
+@node Toolbar
+@subsection Toolbar
-@item
-There are several more commands for setting/removing/acting on process
-marked articles on the @kbd{M P} submap (@pxref{Setting Process Marks}).
+@table @code
-@item
-The summary buffer can be limited to show parts of the available
-articles based on a wide range of criteria. These commands have been
-bound to keys on the @kbd{/} submap (@pxref{Limiting}).
+@iftex
+@iflatex
+\margindex{}
+@end iflatex
+@end iftex
-@item
-Articles can be made persistent with the @kbd{*} command
-(@pxref{Persistent Articles}).
+@item gnus-use-toolbar
+@vindex gnus-use-toolbar
+If @code{nil}, don't display toolbars. If non-@code{nil}, it should be
+one of @code{default-toolbar}, @code{top-toolbar}, @code{bottom-toolbar},
+@code{right-toolbar}, or @code{left-toolbar}.
-@item
-All functions for hiding article elements are now toggles.
+@item gnus-group-toolbar
+@vindex gnus-group-toolbar
+The toolbar in the group buffer.
-@item
-Article headers can be buttonized (@pxref{Article Washing}).
+@item gnus-summary-toolbar
+@vindex gnus-summary-toolbar
+The toolbar in the summary buffer.
-@item
-All mail backends support fetching articles by @code{Message-ID}.
+@item gnus-summary-mail-toolbar
+@vindex gnus-summary-mail-toolbar
+The toolbar in the summary buffer of mail groups.
-@item
-Duplicate mail can now be treated properly (@pxref{Duplicates}).
+@end table
-@item
-All summary mode commands are available directly from the article
-buffer (@pxref{Article Keymap}).
-@item
-Frames can be part of @code{gnus-buffer-configuration} (@pxref{Windows
-Configuration}).
+@node XVarious
+@subsection Various XEmacs Variables
+
+@table @code
+@item gnus-xmas-glyph-directory
+@vindex gnus-xmas-glyph-directory
+This is where Gnus will look for pictures. Gnus will normally
+auto-detect this directory, but you may set it manually if you have an
+unusual directory structure.
+
+@item gnus-xmas-logo-color-alist
+@vindex gnus-xmas-logo-color-alist
+This is an alist where the key is a type symbol and the values are the
+foreground and background color of the splash page glyph.
+
+@item gnus-xmas-logo-color-style
+@vindex gnus-xmas-logo-color-style
+This is the key used to look up the color in the alist described above.
+Valid values include @code{flame}, @code{pine}, @code{moss},
+@code{irish}, @code{sky}, @code{tin}, @code{velvet}, @code{grape},
+@code{labia}, @code{berry}, @code{neutral}, and @code{september}.
+
+@item gnus-xmas-modeline-glyph
+@vindex gnus-xmas-modeline-glyph
+A glyph displayed in all Gnus mode lines. It is a tiny gnu head by
+default.
-@item
-Mail can be re-scanned by a daemonic process (@pxref{Daemons}).
@iftex
@iflatex
-\marginpar[\mbox{}\hfill\epsfig{figure=tmp/fseptember.ps,height=5cm}]{\epsfig{figure=tmp/fseptember.ps,height=5cm}}
+\margindex{}
@end iflatex
@end iftex
-@item
-Gnus can make use of NoCeM files to weed out spam (@pxref{NoCeM}).
+@end table
-@lisp
-(setq gnus-use-nocem t)
-@end lisp
-@item
-Groups can be made permanently visible (@pxref{Listing Groups}).
-@lisp
-(setq gnus-permanently-visible-groups "^nnml:")
-@end lisp
-@item
-Many new hooks have been introduced to make customizing easier.
+@node Fuzzy Matching
+@section Fuzzy Matching
+@cindex fuzzy matching
-@item
-Gnus respects the @code{Mail-Copies-To} header.
+Gnus provides @dfn{fuzzy matching} of @code{Subject} lines when doing
+things like scoring, thread gathering and thread comparison.
-@item
-Threads can be gathered by looking at the @code{References} header
-(@pxref{Customizing Threading}).
+As opposed to regular expression matching, fuzzy matching is very fuzzy.
+It's so fuzzy that there's not even a definition of what @dfn{fuzziness}
+means, and the implementation has changed over time.
-@lisp
-(setq gnus-summary-thread-gathering-function
- 'gnus-gather-threads-by-references)
-@end lisp
+Basically, it tries to remove all noise from lines before comparing.
+@samp{Re: }, parenthetical remarks, white space, and so on, are filtered
+out of the strings before comparing the results. This often leads to
+adequate results---even when faced with strings generated by text
+manglers masquerading as newsreaders.
-@item
-Read articles can be stored in a special backlog buffer to avoid
-refetching (@pxref{Article Backlog}).
-@lisp
-(setq gnus-keep-backlog 50)
-@end lisp
+@node Thwarting Email Spam
+@section Thwarting Email Spam
+@cindex email spam
+@cindex spam
+@cindex UCE
+@cindex unsolicited commercial email
-@item
-A clean copy of the current article is always stored in a separate
-buffer to allow easier treatment.
+In these last days of the Usenet, commercial vultures are hanging about
+and grepping through news like crazy to find email addresses they can
+foist off their scams and products to. As a reaction to this, many
+people have started putting nonsense addresses into their @code{From}
+lines. I think this is counterproductive---it makes it difficult for
+people to send you legitimate mail in response to things you write, as
+well as making it difficult to see who wrote what. This rewriting may
+perhaps be a bigger menace than the unsolicited commercial email itself
+in the end.
-@item
-Gnus can suggest where to save articles (@pxref{Saving Articles}).
+The biggest problem I have with email spam is that it comes in under
+false pretenses. I press @kbd{g} and Gnus merrily informs me that I
+have 10 new emails. I say ``Golly gee! Happy is me!'' and select the
+mail group, only to find two pyramid schemes, seven advertisements
+(``New! Miracle tonic for growing full, lustrous hair on your toes!'')
+and one mail asking me to repent and find some god.
-@item
-Gnus doesn't have to do as much prompting when saving (@pxref{Saving
-Articles}).
+This is annoying. Here's what you can do about it.
+
+@menu
+* The problem of spam:: Some background, and some solutions
+* Anti-Spam Basics:: Simple steps to reduce the amount of spam.
+* SpamAssassin:: How to use external anti-spam tools.
+* Hashcash:: Reduce spam by burning CPU time.
+* Filtering Spam Using The Spam ELisp Package::
+* Filtering Spam Using Statistics with spam-stat::
+@end menu
+
+@node The problem of spam
+@subsection The problem of spam
+@cindex email spam
+@cindex spam filtering approaches
+@cindex filtering approaches, spam
+@cindex UCE
+@cindex unsolicited commercial email
+
+First, some background on spam.
+
+If you have access to e-mail, you are familiar with spam (technically
+termed @acronym{UCE}, Unsolicited Commercial E-mail). Simply put, it exists
+because e-mail delivery is very cheap compared to paper mail, so only
+a very small percentage of people need to respond to an UCE to make it
+worthwhile to the advertiser. Ironically, one of the most common
+spams is the one offering a database of e-mail addresses for further
+spamming. Senders of spam are usually called @emph{spammers}, but terms like
+@emph{vermin}, @emph{scum}, and @emph{morons} are in common use as well.
+
+Spam comes from a wide variety of sources. It is simply impossible to
+dispose of all spam without discarding useful messages. A good
+example is the TMDA system, which requires senders
+unknown to you to confirm themselves as legitimate senders before
+their e-mail can reach you. Without getting into the technical side
+of TMDA, a downside is clearly that e-mail from legitimate sources may
+be discarded if those sources can't or won't confirm themselves
+through the TMDA system. Another problem with TMDA is that it
+requires its users to have a basic understanding of e-mail delivery
+and processing.
+
+The simplest approach to filtering spam is filtering. If you get 200
+spam messages per day from @email{random-address@@vmadmin.com}, you
+block @samp{vmadmin.com}. If you get 200 messages about
+@samp{VIAGRA}, you discard all messages with @samp{VIAGRA} in the
+message. This, unfortunately, is a great way to discard legitimate
+e-mail. For instance, the very informative and useful RISKS digest
+has been blocked by overzealous mail filters because it
+@strong{contained} words that were common in spam messages.
+Nevertheless, in isolated cases, with great care, direct filtering of
+mail can be useful.
+
+Another approach to filtering e-mail is the distributed spam
+processing, for instance DCC implements such a system. In essence,
+@code{N} systems around the world agree that a machine @samp{X} in
+China, Ghana, or California is sending out spam e-mail, and these
+@code{N} systems enter @samp{X} or the spam e-mail from @samp{X} into
+a database. The criteria for spam detection vary - it may be the
+number of messages sent, the content of the messages, and so on. When
+a user of the distributed processing system wants to find out if a
+message is spam, he consults one of those @code{N} systems.
+
+Distributed spam processing works very well against spammers that send
+a large number of messages at once, but it requires the user to set up
+fairly complicated checks. There are commercial and free distributed
+spam processing systems. Distributed spam processing has its risks as
+well. For instance legitimate e-mail senders have been accused of
+sending spam, and their web sites have been shut down for some time
+because of the incident.
+
+The statistical approach to spam filtering is also popular. It is
+based on a statistical analysis of previous spam messages. Usually
+the analysis is a simple word frequency count, with perhaps pairs of
+words or 3-word combinations thrown into the mix. Statistical
+analysis of spam works very well in most of the cases, but it can
+classify legitimate e-mail as spam in some cases. It takes time to
+run the analysis, the full message must be analyzed, and the user has
+to store the database of spam analyses.
+
+@node Anti-Spam Basics
+@subsection Anti-Spam Basics
+@cindex email spam
+@cindex spam
+@cindex UCE
+@cindex unsolicited commercial email
+
+One way of dealing with spam is having Gnus split out all spam into a
+@samp{spam} mail group (@pxref{Splitting Mail}).
+
+First, pick one (1) valid mail address that you can be reached at, and
+put it in your @code{From} header of all your news articles. (I've
+chosen @samp{larsi@@trym.ifi.uio.no}, but for many addresses on the form
+@samp{larsi+usenet@@ifi.uio.no} will be a better choice. Ask your
+sysadmin whether your sendmail installation accepts keywords in the local
+part of the mail address.)
@lisp
-(setq gnus-prompt-before-saving t)
+(setq message-default-news-headers
+ "From: Lars Magne Ingebrigtsen <larsi@@trym.ifi.uio.no>\n")
@end lisp
-@item
-@code{gnus-uu} can view decoded files asynchronously while fetching
-articles (@pxref{Other Decode Variables}).
+Then put the following split rule in @code{nnmail-split-fancy}
+(@pxref{Fancy Mail Splitting}):
@lisp
-(setq gnus-uu-grabbed-file-functions 'gnus-uu-grab-view)
+(
+ ...
+ (to "larsi@@trym.ifi.uio.no"
+ (| ("subject" "re:.*" "misc")
+ ("references" ".*@@.*" "misc")
+ "spam"))
+ ...
+)
@end lisp
-@item
-Filling in the article buffer now works properly on cited text
-(@pxref{Article Washing}).
+This says that all mail to this address is suspect, but if it has a
+@code{Subject} that starts with a @samp{Re:} or has a @code{References}
+header, it's probably ok. All the rest goes to the @samp{spam} group.
+(This idea probably comes from Tim Pierce.)
-@item
-Hiding cited text adds buttons to toggle hiding, and how much
-cited text to hide is now customizable (@pxref{Article Hiding}).
+In addition, many mail spammers talk directly to your @sc{smtp} server
+and do not include your email address explicitly in the @code{To}
+header. Why they do this is unknown---perhaps it's to thwart this
+thwarting scheme? In any case, this is trivial to deal with---you just
+put anything not addressed to you in the @samp{spam} group by ending
+your fancy split rule in this way:
@lisp
-(setq gnus-cited-lines-visible 2)
+(
+ ...
+ (to "larsi" "misc")
+ "spam")
@end lisp
-@item
-Boring headers can be hidden (@pxref{Article Hiding}).
+In my experience, this will sort virtually everything into the right
+group. You still have to check the @samp{spam} group from time to time to
+check for legitimate mail, though. If you feel like being a good net
+citizen, you can even send off complaints to the proper authorities on
+each unsolicited commercial email---at your leisure.
-@item
-Default scoring values can now be set from the menu bar.
+If you are also a lazy net citizen, you will probably prefer complaining
+automatically with the @file{gnus-junk.el} package, available FOR FREE
+at @* @uref{http://stud2.tuwien.ac.at/~e9426626/gnus-junk.html}.
+Since most e-mail spam is sent automatically, this may reconcile the
+cosmic balance somewhat.
-@item
-Further syntax checking of outgoing articles have been added.
+This works for me. It allows people an easy way to contact me (they can
+just press @kbd{r} in the usual way), and I'm not bothered at all with
+spam. It's a win-win situation. Forging @code{From} headers to point
+to non-existent domains is yucky, in my opinion.
-@end itemize
-@node Red Gnus
-@subsubsection Red Gnus
+@node SpamAssassin
+@subsection SpamAssassin, Vipul's Razor, DCC, etc
+@cindex SpamAssassin
+@cindex Vipul's Razor
+@cindex DCC
-New features in Gnus 5.4/5.5:
+The days where the hints in the previous section was sufficient in
+avoiding spam is coming to an end. There are many tools out there
+that claim to reduce the amount of spam you get. This section could
+easily become outdated fast, as new products replace old, but
+fortunately most of these tools seem to have similar interfaces. Even
+though this section will use SpamAssassin as an example, it should be
+easy to adapt it to most other tools.
-@iftex
-@iflatex
-\gnusfig{-5.5cm}{-4cm}{\epsfig{figure=tmp/red.ps,height=20cm}}
-@end iflatex
-@end iftex
+If the tool you are using is not installed on the mail server, you
+need to invoke it yourself. Ideas on how to use the
+@code{:postscript} mail source parameter (@pxref{Mail Source
+Specifiers}) follows.
-@itemize @bullet
+@lisp
+(setq mail-sources
+ '((file :prescript "formail -bs spamassassin < /var/mail/%u")
+ (pop :user "jrl"
+ :server "pophost"
+ :postscript "mv %t /tmp/foo; formail -bs spamc < /tmp/foo > %t")))
+@end lisp
-@item
-@file{nntp.el} has been totally rewritten in an asynchronous fashion.
+Once you managed to process your incoming spool somehow, thus making
+the mail contain e.g. a header indicating it is spam, you are ready to
+filter it out. Using normal split methods (@pxref{Splitting Mail}):
-@item
-Article prefetching functionality has been moved up into
-Gnus (@pxref{Asynchronous Fetching}).
+@lisp
+(setq nnmail-split-methods '(("spam" "^X-Spam-Flag: YES")
+ ...))
+@end lisp
-@item
-Scoring can now be performed with logical operators like @code{and},
-@code{or}, @code{not}, and parent redirection (@pxref{Advanced
-Scoring}).
+Or using fancy split methods (@pxref{Fancy Mail Splitting}):
-@item
-Article washing status can be displayed in the
-article mode line (@pxref{Misc Article}).
+@lisp
+(setq nnmail-split-methods 'nnmail-split-fancy
+ nnmail-split-fancy '(| ("X-Spam-Flag" "YES" "spam")
+ ...))
+@end lisp
-@item
-@file{gnus.el} has been split into many smaller files.
+Some people might not like the idea of piping the mail through various
+programs using a @code{:prescript} (if some program is buggy, you
+might lose all mail). If you are one of them, another solution is to
+call the external tools during splitting. Example fancy split method:
-@item
-Suppression of duplicate articles based on Message-ID can be done
-(@pxref{Duplicate Suppression}).
+@lisp
+(setq nnmail-split-fancy '(| (: kevin-spamassassin)
+ ...))
+(defun kevin-spamassassin ()
+ (save-excursion
+ (let ((buf (or (get-buffer " *nnmail incoming*")
+ (get-buffer " *nnml move*"))))
+ (if (not buf)
+ (progn (message "Oops, cannot find message buffer") nil)
+ (set-buffer buf)
+ (if (eq 1 (call-process-region (point-min) (point-max)
+ "spamc" nil nil nil "-c"))
+ "spam")))))
+@end lisp
+
+That is about it. As some spam is likely to get through anyway, you
+might want to have a nifty function to call when you happen to read
+spam. And here is the nifty function:
@lisp
-(setq gnus-suppress-duplicates t)
+ (defun my-gnus-raze-spam ()
+ "Submit SPAM to Vipul's Razor, then mark it as expirable."
+ (interactive)
+ (gnus-summary-show-raw-article)
+ (gnus-summary-save-in-pipe "razor-report -f -d")
+ (gnus-summary-mark-as-expirable 1))
@end lisp
-@item
-New variables for specifying what score and adapt files are to be
-considered home score and adapt files (@pxref{Home Score File}) have
-been added.
+@node Hashcash
+@subsection Hashcash
+@cindex hashcash
+
+A novel technique to fight spam is to require senders to do something
+costly for each message they send. This has the obvious drawback that
+you cannot rely on that everyone in the world uses this technique,
+since it is not part of the Internet standards, but it may be useful
+in smaller communities.
+
+While the tools in the previous section work well in practice, they
+work only because the tools are constantly maintained and updated as
+new form of spam appears. This means that a small percentage of spam
+will always get through. It also means that somewhere, someone needs
+to read lots of spam to update these tools. Hashcash avoids that, but
+instead requires that everyone you communicate with supports the
+scheme. You can view the two approaches as pragmatic vs dogmatic.
+The approaches have their own advantages and disadvantages, but as
+often in the real world, a combination of them is stronger than either
+one of them separately.
+
+@cindex X-Hashcash
+The ``something costly'' is to burn CPU time, more specifically to
+compute a hash collision up to a certain number of bits. The
+resulting hashcash cookie is inserted in a @samp{X-Hashcash:}
+header. For more details, and for the external application
+@code{hashcash} you need to install to use this feature, see
+@uref{http://www.cypherspace.org/~adam/hashcash/}. Even more
+information can be found at @uref{http://www.camram.org/}.
+
+If you wish to call hashcash for each message you send, say something
+like:
-@item
-@code{nndoc} was rewritten to be easily extendable (@pxref{Document
-Server Internals}).
+@lisp
+(require 'hashcash)
+(add-hook 'message-send-hook 'mail-add-payment)
+@end lisp
-@item
-Groups can inherit group parameters from parent topics (@pxref{Topic
-Parameters}).
+The @code{hashcash.el} library can be found at
+@uref{http://users.actrix.gen.nz/mycroft/hashcash.el}, or in the Gnus
+development contrib directory.
-@item
-Article editing has been revamped and is now actually usable.
+You will need to set up some additional variables as well:
-@item
-Signatures can be recognized in more intelligent fashions
-(@pxref{Article Signature}).
+@table @code
-@item
-Summary pick mode has been made to look more @code{nn}-like. Line
-numbers are displayed and the @kbd{.} command can be used to pick
-articles (@code{Pick and Read}).
+@item hashcash-default-payment
+@vindex hashcash-default-payment
+This variable indicates the default number of bits the hash collision
+should consist of. By default this is 0, meaning nothing will be
+done. Suggested useful values include 17 to 29.
+
+@item hashcash-payment-alist
+@vindex hashcash-payment-alist
+Some receivers may require you to spend burn more CPU time than the
+default. This variable contains a list of @samp{(ADDR AMOUNT)} cells,
+where ADDR is the receiver (email address or newsgroup) and AMOUNT is
+the number of bits in the collision that is needed. It can also
+contain @samp{(ADDR STRING AMOUNT)} cells, where the STRING is the
+string to use (normally the email address or newsgroup name is used).
+
+@item hashcash
+@vindex hashcash
+Where the @code{hashcash} binary is installed.
-@item
-Commands for moving the @file{.newsrc.eld} from one server to
-another have been added (@pxref{Changing Servers}).
+@end table
-@item
-There's a way now to specify that ``uninteresting'' fields be suppressed
-when generating lines in buffers (@pxref{Advanced Formatting}).
+Currently there is no built in functionality in Gnus to verify
+hashcash cookies, it is expected that this is performed by your hand
+customized mail filtering scripts. Improvements in this area would be
+a useful contribution, however.
-@item
-Several commands in the group buffer can be undone with @kbd{M-C-_}
-(@pxref{Undo}).
+@node Filtering Spam Using The Spam ELisp Package
+@subsection Filtering Spam Using The Spam ELisp Package
+@cindex spam filtering
+@cindex spam
-@item
-Scoring can be done on words using the new score type @code{w}
-(@pxref{Score File Format}).
+The idea behind @code{spam.el} is to have a control center for spam detection
+and filtering in Gnus. To that end, @code{spam.el} does two things: it
+filters incoming mail, and it analyzes mail known to be spam or ham.
+@emph{Ham} is the name used throughout @code{spam.el} to indicate
+non-spam messages.
-@item
-Adaptive scoring can be done on a Subject word-by-word basis
-(@pxref{Adaptive Scoring}).
+So, what happens when you load @code{spam.el}? First of all, you get
+the following keyboard commands:
-@lisp
-(setq gnus-use-adaptive-scoring '(word))
-@end lisp
+@table @kbd
-@item
-Scores can be decayed (@pxref{Score Decays}).
+@item M-d
+@itemx M s x
+@itemx S x
+@kindex M-d
+@kindex S x
+@kindex M s x
+@findex gnus-summary-mark-as-spam
+@code{gnus-summary-mark-as-spam}.
+
+Mark current article as spam, showing it with the @samp{H} mark.
+Whenever you see a spam article, make sure to mark its summary line
+with @kbd{M-d} before leaving the group. This is done automatically
+for unread articles in @emph{spam} groups.
+
+@item M s t
+@itemx S t
+@kindex M s t
+@kindex S t
+@findex spam-bogofilter-score
+@code{spam-bogofilter-score}.
+
+You must have Bogofilter installed for that command to work properly.
+
+@xref{Bogofilter}.
-@lisp
-(setq gnus-decay-scores t)
-@end lisp
+@end table
-@item
-Scoring can be performed using a regexp on the Date header. The Date is
-normalized to compact ISO 8601 format first (@pxref{Score File Format}).
+Also, when you load @code{spam.el}, you will be able to customize its
+variables. Try @code{customize-group} on the @samp{spam} variable
+group.
-@item
-A new command has been added to remove all data on articles from
-the native server (@pxref{Changing Servers}).
+The concepts of ham processors and spam processors are very important.
+Ham processors and spam processors for a group can be set with the
+@code{spam-process} group parameter, or the
+@code{gnus-spam-process-newsgroups} variable. Ham processors take
+mail known to be non-spam (@emph{ham}) and process it in some way so
+that later similar mail will also be considered non-spam. Spam
+processors take mail known to be spam and process it so similar spam
+will be detected later.
+
+Gnus learns from the spam you get. You have to collect your spam in
+one or more spam groups, and set or customize the variable
+@code{spam-junk-mailgroups} as appropriate. You can also declare
+groups to contain spam by setting their group parameter
+@code{spam-contents} to @code{gnus-group-spam-classification-spam}, or
+by customizing the corresponding variable
+@code{gnus-spam-newsgroup-contents}. The @code{spam-contents} group
+parameter and the @code{gnus-spam-newsgroup-contents} variable can
+also be used to declare groups as @emph{ham} groups if you set their
+classification to @code{gnus-group-spam-classification-ham}. If
+groups are not classified by means of @code{spam-junk-mailgroups},
+@code{spam-contents}, or @code{gnus-spam-newsgroup-contents}, they are
+considered @emph{unclassified}. All groups are unclassified by
+default.
-@item
-A new command for reading collections of documents
-(@code{nndoc} with @code{nnvirtual} on top) has been added---@kbd{M-C-d}
-(@pxref{Really Various Summary Commands}).
+In spam groups, all messages are considered to be spam by default:
+they get the @samp{H} mark when you enter the group. You must review
+these messages from time to time and remove the @samp{H} mark for
+every message that is not spam after all. To remove the @samp{H}
+mark, you can use @kbd{M-u} to "unread" the article, or @kbd{d} for
+declaring it read the non-spam way. When you leave a group, all
+spam-marked (@samp{H}) articles are sent to a spam processor which
+will study them as spam samples.
+
+Messages may also be deleted in various other ways, and unless
+@code{spam-ham-marks} gets overridden below, marks @samp{R} and
+@samp{r} for default read or explicit delete, marks @samp{X} and
+@samp{K} for automatic or explicit kills, as well as mark @samp{Y} for
+low scores, are all considered to be associated with articles which
+are not spam. This assumption might be false, in particular if you
+use kill files or score files as means for detecting genuine spam, you
+should then adjust the @code{spam-ham-marks} variable.
+
+@defvar spam-ham-marks
+You can customize this variable to be the list of marks you want to
+consider ham. By default, the list contains the deleted, read,
+killed, kill-filed, and low-score marks.
+@end defvar
+
+@defvar spam-spam-marks
+You can customize this variable to be the list of marks you want to
+consider spam. By default, the list contains only the spam mark.
+@end defvar
+
+When you leave @emph{any} group, regardless of its
+@code{spam-contents} classification, all spam-marked articles are sent
+to a spam processor, which will study these as spam samples. If you
+explicit kill a lot, you might sometimes end up with articles marked
+@samp{K} which you never saw, and which might accidentally contain
+spam. Best is to make sure that real spam is marked with @samp{H},
+and nothing else.
+
+When you leave a @emph{spam} group, all spam-marked articles are
+marked as expired after processing with the spam processor. This is
+not done for @emph{unclassified} or @emph{ham} groups. Also, any
+@strong{ham} articles in a spam group will be moved to a location
+determined by either the @code{ham-process-destination} group
+parameter or a match in the @code{gnus-ham-process-destinations}
+variable, which is a list of regular expressions matched with group
+names (it's easiest to customize this variable with
+@code{customize-variable gnus-ham-process-destinations}). The ultimate
+location is a group name. If the @code{ham-process-destination}
+parameter is not set, spam articles are only expired.
+
+When you leave a @emph{ham} group, all ham-marked articles are sent to
+a ham processor, which will study these as non-spam samples.
+
+When you leave a @emph{ham} or @emph{unclassified} group, all
+@strong{spam} articles are moved to a location determined by either
+the @code{spam-process-destination} group parameter or a match in the
+@code{gnus-spam-process-destinations} variable, which is a list of
+regular expressions matched with group names (it's easiest to
+customize this variable with @code{customize-variable
+gnus-spam-process-destinations}). The ultimate location is a group
+name. If the @code{spam-process-destination} parameter is not set,
+the spam articles are only expired.
+
+To use the @code{spam.el} facilities for incoming mail filtering, you
+must add the following to your fancy split list
+@code{nnmail-split-fancy} or @code{nnimap-split-fancy}:
-@item
-Process mark sets can be pushed and popped (@pxref{Setting Process
-Marks}).
+@example
+(: spam-split)
+@end example
-@item
-A new mail-to-news backend makes it possible to post even when the NNTP
-server doesn't allow posting (@pxref{Mail-To-News Gateways}).
+Note that the fancy split may be called @code{nnmail-split-fancy} or
+@code{nnimap-split-fancy}, depending on whether you use the nnmail or
+nnimap back ends to retrieve your mail.
-@item
-A new backend for reading searches from Web search engines
-(@dfn{DejaNews}, @dfn{Alta Vista}, @dfn{InReference}) has been added
-(@pxref{Web Searches}).
+The @code{spam-split} function will process incoming mail and send the
+mail considered to be spam into the group name given by the variable
+@code{spam-split-group}. By default that group name is @samp{spam},
+but you can customize it.
-@item
-Groups inside topics can now be sorted using the standard sorting
-functions, and each topic can be sorted independently (@pxref{Topic
-Sorting}).
+@emph{Note for IMAP users}
-@item
-Subsets of the groups can be sorted independently (@code{Sorting
-Groups}).
+The boolean variable @code{nnimap-split-download-body} needs to be
+set, if you want to split based on the whole message instead of just
+the headers. By default, the nnimap backend will only retrieve the
+message headers. If you use spam-check-bogofilter, spam-check-ifile,
+or spam-check-stat (the splitters that can benefit from the full
+message body), you should set this variable. It is not set by default
+because it will slow IMAP down.
-@item
-Cached articles can be pulled into the groups (@pxref{Summary Generation
-Commands}).
-@iftex
-@iflatex
-\marginpar[\mbox{}\hfill\epsfig{figure=tmp/fred.ps,width=3cm}]{\epsfig{figure=tmp/fred.ps,width=3cm}}
-@end iflatex
-@end iftex
+@xref{Splitting in IMAP}.
-@item
-Score files are now applied in a more reliable order (@pxref{Score
-Variables}).
+@emph{TODO: Currently, spam.el only supports insertion of articles
+into a backend. There is no way to tell spam.el that an article is no
+longer spam or ham.}
-@item
-Reports on where mail messages end up can be generated (@pxref{Splitting
-Mail}).
+@emph{TODO: spam.el needs to provide a uniform way of training all the
+statistical databases. Some have that functionality built-in, others
+don't.}
-@item
-More hooks and functions have been added to remove junk from incoming
-mail before saving the mail (@pxref{Washing Mail}).
+The following are the methods you can use to control the behavior of
+@code{spam-split} and their corresponding spam and ham processors:
-@item
-Emphasized text can be properly fontisized:
+@menu
+* Blacklists and Whitelists::
+* BBDB Whitelists::
+* Blackholes::
+* Bogofilter::
+* ifile spam filtering::
+* spam-stat spam filtering::
+* Extending the spam elisp package::
+@end menu
-@end itemize
+@node Blacklists and Whitelists
+@subsubsection Blacklists and Whitelists
+@cindex spam filtering
+@cindex whitelists, spam filtering
+@cindex blacklists, spam filtering
+@cindex spam
+@defvar spam-use-blacklist
+Set this variable to @code{t} if you want to use blacklists when
+splitting incoming mail. Messages whose senders are in the blacklist
+will be sent to the @code{spam-split-group}. This is an explicit
+filter, meaning that it acts only on mail senders @emph{declared} to
+be spammers.
+@end defvar
+
+@defvar spam-use-whitelist
+Set this variable to @code{t} if you want to use whitelists when
+splitting incoming mail. Messages whose senders are not in the
+whitelist will be sent to the @code{spam-split-group}. This is an
+implicit filter, meaning it believes everyone to be a spammer unless
+told otherwise. Use with care.
+@end defvar
+
+@defvar gnus-group-spam-exit-processor-blacklist
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the senders of
+spam-marked articles will be added to the blacklist.
+@end defvar
+
+@defvar gnus-group-ham-exit-processor-whitelist
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the senders of
+ham-marked articles in @emph{ham} groups will be added to the
+whitelist. Note that this ham processor has no effect in @emph{spam}
+or @emph{unclassified} groups.
+@end defvar
+
+Blacklists are lists of regular expressions matching addresses you
+consider to be spam senders. For instance, to block mail from any
+sender at @samp{vmadmin.com}, you can put @samp{vmadmin.com} in your
+blacklist. You start out with an empty blacklist. Blacklist entries
+use the Emacs regular expression syntax.
+
+Conversely, whitelists tell Gnus what addresses are considered
+legitimate. All non-whitelisted addresses are considered spammers.
+This option is probably not useful for most Gnus users unless the
+whitelists is very comprehensive or permissive. Also see @ref{BBDB
+Whitelists}. Whitelist entries use the Emacs regular expression
+syntax.
+
+The blacklist and whitelist file locations can be customized with the
+@code{spam-directory} variable (@file{~/News/spam} by default), or
+the @code{spam-whitelist} and @code{spam-blacklist} variables
+directly. The whitelist and blacklist files will by default be in the
+@code{spam-directory} directory, named @file{whitelist} and
+@file{blacklist} respectively.
+
+@node BBDB Whitelists
+@subsubsection BBDB Whitelists
+@cindex spam filtering
+@cindex BBDB whitelists, spam filtering
+@cindex BBDB, spam filtering
+@cindex spam
-@node Quassia Gnus
-@subsubsection Quassia Gnus
+@defvar spam-use-BBDB
+
+Analogous to @code{spam-use-whitelist} (@pxref{Blacklists and
+Whitelists}), but uses the BBDB as the source of whitelisted addresses,
+without regular expressions. You must have the BBDB loaded for
+@code{spam-use-BBDB} to work properly. Only addresses in the BBDB
+will be allowed through; all others will be classified as spam.
+
+@end defvar
+
+@defvar gnus-group-ham-exit-processor-BBDB
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the senders of
+ham-marked articles in @emph{ham} groups will be added to the
+BBDB. Note that this ham processor has no effect in @emph{spam}
+or @emph{unclassified} groups.
+@end defvar
+
+@node Blackholes
+@subsubsection Blackholes
+@cindex spam filtering
+@cindex blackholes, spam filtering
+@cindex spam
-New features in Gnus 5.6:
+@defvar spam-use-blackholes
-@itemize @bullet
+This option is disabled by default. You can let Gnus consult the
+blackhole-type distributed spam processing systems (DCC, for instance)
+when you set this option. The variable @code{spam-blackhole-servers}
+holds the list of blackhole servers Gnus will consult. The current
+list is fairly comprehensive, but make sure to let us know if it
+contains outdated servers.
-@item
-New functionality for using Gnus as an offline newsreader has been
-added. A plethora of new commands and modes have been added. See
-@pxref{Gnus Unplugged} for the full story.
+The blackhole check uses the @code{dig.el} package, but you can tell
+@code{spam.el} to use @code{dns.el} instead for better performance if
+you set @code{spam-use-dig} to nil. It is not recommended at this
+time to set @code{spam-use-dig} to nil despite the possible
+performance improvements, because some users may be unable to use it,
+but you can try it and see if it works for you.
-@item
- The @code{nndraft} backend has returned, but works differently than
-before. All Message buffers are now also articles in the @code{nndraft}
-group, which is created automatically.
+@end defvar
-@item
-@code{gnus-alter-header-function} can now be used to alter header
-values.
+@defvar spam-blackhole-servers
-@item
- @code{gnus-summary-goto-article} now accept Message-ID's.
+The list of servers to consult for blackhole checks.
-@item
- A new Message command for deleting text in the body of a message
-outside the region: @kbd{C-c C-v}.
+@end defvar
-@item
- You can now post to component group in @code{nnvirtual} groups with
-@kbd{C-u C-c C-c}.
+@defvar spam-use-dig
-@item
- @code{nntp-rlogin-program}---new variable to ease customization.
+Use the @code{dig.el} package instead of the @code{dns.el} package.
+The default setting of @code{t} is recommended.
-@item
- @code{C-u C-c C-c} in @code{gnus-article-edit-mode} will now inhibit
-re-highlighting of the article buffer.
+@end defvar
-@item
- New element in @code{gnus-boring-article-headers}---@code{long-to}.
+Blackhole checks are done only on incoming mail. There is no spam or
+ham processor for blackholes.
-@item
- @kbd{M-i} symbolic prefix command. See the section "Symbolic
-Prefixes" in the Gnus manual for details.
+@node Bogofilter
+@subsubsection Bogofilter
+@cindex spam filtering
+@cindex bogofilter, spam filtering
+@cindex spam
-@item
- @kbd{L} and @kbd{I} in the summary buffer now take the symbolic prefix
-@kbd{a} to add the score rule to the "all.SCORE" file.
+@defvar spam-use-bogofilter
-@item
- @code{gnus-simplify-subject-functions} variable to allow greater
-control over simplification.
+Set this variable if you want @code{spam-split} to use Eric Raymond's
+speedy Bogofilter.
-@item
- @kbd{A T}---new command for fetching the current thread.
+With a minimum of care for associating the @samp{H} mark for spam
+articles only, Bogofilter training all gets fairly automatic. You
+should do this until you get a few hundreds of articles in each
+category, spam or not. The command @kbd{S t} in summary mode, either
+for debugging or for curiosity, shows the @emph{spamicity} score of
+the current article (between 0.0 and 1.0).
-@item
- @kbd{/ T}---new command for including the current thread in the
-limit.
+Bogofilter determines if a message is spam based on an internal
+threshold, set at compilation time. That threshold can't be
+customized.
-@item
- @kbd{M-RET} is a new Message command for breaking cited text.
+If the @code{bogofilter} executable is not in your path, Bogofilter
+processing will be turned off.
-@item
- @samp{\\1}-expressions are now valid in @code{nnmail-split-methods}.
+You should not enable this if you use @code{spam-use-bogofilter-headers}.
-@item
- The @code{custom-face-lookup} function has been removed.
-If you used this function in your initialization files, you must
-rewrite them to use @code{face-spec-set} instead.
+@end defvar
-@item
- Canceling now uses the current select method. Symbolic prefix
-@kbd{a} forces normal posting method.
+@defvar spam-use-bogofilter-headers
-@item
- New command to translate M******** sm*rtq**t*s into proper
-text---@kbd{W d}.
+Set this variable if you want @code{spam-split} to use Eric Raymond's
+speedy Bogofilter, looking only at the message headers. It works
+similarly to @code{spam-use-bogofilter}, but the @code{X-Bogosity} header
+must be in the message already. Normally you would do this with a
+procmail recipe or something similar; consult the Bogofilter
+installation documents for details.
-@item
- For easier debugging of @code{nntp}, you can set
-@code{nntp-record-commands} to a non-@code{nil} value.
+You should not enable this if you use @code{spam-use-bogofilter}.
-@item
- @code{nntp} now uses @file{~/.authinfo}, a @file{.netrc}-like file, for
-controlling where and how to send @sc{authinfo} to @sc{nntp} servers.
+@end defvar
-@item
- A command for editing group parameters from the summary buffer
-has been added.
+@defvar gnus-group-spam-exit-processor-bogofilter
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, spam-marked articles
+will be added to the Bogofilter spam database.
+@end defvar
-@item
- A history of where mails have been split is available.
+@defvar gnus-group-ham-exit-processor-bogofilter
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the ham-marked
+articles in @emph{ham} groups will be added to the Bogofilter database
+of non-spam messages. Note that this ham processor has no effect in
+@emph{spam} or @emph{unclassified} groups.
+@end defvar
-@item
- A new article date command has been added---@code{article-date-iso8601}.
+@defvar spam-bogofilter-database-directory
-@item
- Subjects can be simplified when threading by setting
-@code{gnus-score-thread-simplify}.
+This is the directory where Bogofilter will store its databases. It
+is not specified by default, so Bogofilter will use its own default
+database directory.
-@item
- A new function for citing in Message has been
-added---@code{message-cite-original-without-signature}.
+@end defvar
-@item
- @code{article-strip-all-blank-lines}---new article command.
+The Bogofilter mail classifier is similar to ifile in intent and
+purpose. A ham and a spam processor are provided, plus the
+@code{spam-use-bogofilter} and @code{spam-use-bogofilter-headers}
+variables to indicate to spam-split that Bogofilter should either be
+used, or has already been used on the article. The 0.9.2.1 version of
+Bogofilter was used to test this functionality.
-@item
- A new Message command to kill to the end of the article has
-been added.
+@node ifile spam filtering
+@subsubsection ifile spam filtering
+@cindex spam filtering
+@cindex ifile, spam filtering
+@cindex spam
-@item
- A minimum adaptive score can be specified by using the
-@code{gnus-adaptive-word-minimum} variable.
+@defvar spam-use-ifile
-@item
- The "lapsed date" article header can be kept continually
-updated by the @code{gnus-start-date-timer} command.
+Enable this variable if you want @code{spam-split} to use ifile, a
+statistical analyzer similar to Bogofilter.
-@item
- Web listserv archives can be read with the @code{nnlistserv} backend.
+@end defvar
-@item
- Old dejanews archives can now be read by @code{nnweb}.
+@defvar spam-ifile-all-categories
-@end itemize
+Enable this variable if you want @code{spam-use-ifile} to give you all
+the ifile categories, not just spam/non-spam. If you use this, make
+sure you train ifile as described in its documentation.
+@end defvar
-@node Newest Features
-@subsection Newest Features
-@cindex todo
+@defvar spam-ifile-spam-category
-Also known as the @dfn{todo list}. Sure to be implemented before the
-next millennium.
+This is the category of spam messages as far as ifile is concerned.
+The actual string used is irrelevant, but you probably want to leave
+the default value of @samp{spam}.
+@end defvar
-Be afraid. Be very afraid.
+@defvar spam-ifile-database-path
-(That a feature appears in this list doesn't necessarily mean that I've
-decided to actually implement it. It just means that I think it sounds
-interesting.)
+This is the filename for the ifile database. It is not specified by
+default, so ifile will use its own default database name.
-(Yes, this is the actual, up-to-the-second todo list.)
+@end defvar
-@itemize @bullet
+The ifile mail classifier is similar to Bogofilter in intent and
+purpose. A ham and a spam processor are provided, plus the
+@code{spam-use-ifile} variable to indicate to spam-split that ifile
+should be used. The 1.2.1 version of ifile was used to test this
+functionality.
-@item
- I would like the zombie-page to contain an URL to the source of the
-latest version of gnus or some explanation on where to find it.
+@node spam-stat spam filtering
+@subsubsection spam-stat spam filtering
+@cindex spam filtering
+@cindex spam-stat, spam filtering
+@cindex spam-stat
+@cindex spam
-@item
- A way to continue editing the latest Message composition.
+@xref{Filtering Spam Using Statistics with spam-stat}.
-@item
- http://www.sonicnet.com/feature/ari3/
+@defvar spam-use-stat
-@item
- facep is not declared.
+Enable this variable if you want @code{spam-split} to use
+spam-stat.el, an Emacs Lisp statistical analyzer.
-@item
- Include a section in the manual on why the number of articles
-isn't the same in the group buffer and on the SPC prompt.
+@end defvar
-@item
- Interacting with rmail fcc isn't easy.
+@defvar gnus-group-spam-exit-processor-stat
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the spam-marked
+articles will be added to the spam-stat database of spam messages.
+@end defvar
+
+@defvar gnus-group-ham-exit-processor-stat
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the ham-marked
+articles in @emph{ham} groups will be added to the spam-stat database
+of non-spam messages. Note that this ham processor has no effect in
+@emph{spam} or @emph{unclassified} groups.
+@end defvar
+
+This enables spam.el to cooperate with spam-stat.el. spam-stat.el
+provides an internal (Lisp-only) spam database, which unlike ifile or
+Bogofilter does not require external programs. A spam and a ham
+processor, and the @code{spam-use-stat} variable for @code{spam-split}
+are provided.
+
+@node Extending the spam elisp package
+@subsubsection Extending the spam elisp package
+@cindex spam filtering
+@cindex spam elisp package, extending
+@cindex extending the spam elisp package
+
+Say you want to add a new back end called blackbox. For filtering
+incoming mail, provide the following:
+
+@enumerate
@item
+code
+
@example
- Hypermail:
-<URL:http://www.falch.no/people/pepper/DSSSL-Lite/archives/>
-<URL:http://www.eit.com/software/hypermail/hypermail.html>
-<URL:http://homer.ncm.com/>
-<URL:http://www.yahoo.com/Computers_and_Internet/Internet/World_Wide_Web/HTML_Converters/>
-http://www.uwsg.indiana.edu/hypermail/linux/kernel/9610/index.html
-<URL:http://union.ncsa.uiuc.edu/HyperNews/get/www/html/converters.html>
-http://www.miranova.com/gnus-list/
+(defvar spam-use-blackbox nil
+ "True if blackbox should be used.")
+@end example
+Add
+@example
+ (spam-use-blackbox . spam-check-blackbox)
@end example
+to @code{spam-list-of-checks}.
@item
-@samp{^-- } is made into - in LaTeX.
+functionality
-@item
- gnus-kill is much slower than it was in GNUS 4.1.3.
+Write the @code{spam-check-blackbox} function. It should return
+@samp{nil} or @code{spam-split-group}. See the existing
+@code{spam-check-*} functions for examples of what you can do.
+@end enumerate
-@item
- when expunging articles on low score, the sparse nodes keep hanging on?
-@item
- starting the first time seems to hang Gnus on some systems. Does
-NEWGROUPS answer too fast?
-@item
- nndir doesn't read gzipped files.
-@item
- FAQ doesn't have an up node?
-@item
- when moving mail from a procmail spool to the crash-box,
-the crash-box is only appropriate to one specific group.
-@item
- `t' `t' makes X-Faces disappear.
-@item
- nnmh-be-safe means that crossposted articles will
-be marked as unread.
-@item
- Orphan score entries don't show on "V t" score trace
-@item
- when clearing out data, the cache data should also be reset.
-@item
- rewrite gnus-summary-limit-children to be non-recursive
-to avoid exceeding lisp nesting on huge groups.
-@item
- expunged articles are counted when computing scores.
-@item
- implement gnus-batch-brew-soup
-@item
- ticked articles aren't easy to read in pick mode -- `n' and
-stuff just skips past them. Read articles are the same.
-@item
- topics that contain just groups with ticked
-articles aren't displayed.
-@item
- nndoc should always allocate unique Message-IDs.
-@item
- If there are mail groups the first time you use Gnus, Gnus'll
-make the mail groups killed.
-@item
- no "no news is good news" when using topics.
-@item
- when doing crosspost marking, the cache has to be consulted
-and articles have to be removed.
-@item
- nnweb should fetch complete articles when they are split into several
-parts.
-@item
- scoring on head immediate doesn't work.
-@item
- finding short score file names takes forever.
-@item
- canceling articles in foreign groups.
-@item
- nntp-open-rlogin no longer works.
-@item
- C-u C-x C-s (Summary) switches to the group buffer.
-@item
- move nnmail-split-history out to the backends.
-@item
- nnweb doesn't work properly.
-@item
- using a virtual server name as `gnus-select-method' doesn't work?
-@item
- when killing/yanking a group from one topic to another in a slave, the
-master will yank it first to one topic and then add it to another.
-Perhaps.
+For processing spam and ham messages, provide the following:
+
+@enumerate
@item
- warn user about `=' redirection of a group in the active file?
-@item
- take over the XEmacs menubar and offer a toggle between the XEmacs
-bar and the Gnus bar.
-@item
+code
+
+Note you don't have to provide a spam or a ham processor. Only
+provide them if Blackbox supports spam or ham processing.
+
@example
- push active file and NOV file parsing down into C code.
-`(canonize-message-id id)'
-`(mail-parent-message-id references n)'
-`(parse-news-nov-line &optional dependency-hashtb)'
-`(parse-news-nov-region beg end &optional dependency-hashtb fullp)'
-`(parse-news-active-region beg end hashtb)'
+(defvar gnus-group-spam-exit-processor-blackbox "blackbox"
+ "The Blackbox summary exit spam processor.
+Only applicable to spam groups.")
+
+(defvar gnus-group-ham-exit-processor-blackbox "blackbox"
+ "The whitelist summary exit ham processor.
+Only applicable to non-spam (unclassified and ham) groups.")
@end example
@item
- nnml .overview directory with splits.
-@item
- asynchronous cache
-@item
- postponed commands.
-@item
- the selected article show have its Subject displayed in its summary line.
-@item
- when entering groups, get the real number of unread articles from
-the server?
-@item
- sort after gathering threads -- make false roots have the
-headers of the oldest orphan with a 0 article number?
-@item
- nndoc groups should inherit the score files of their parents? Also
-inherit copy prompts and save files.
-@item
- command to start up Gnus (if not running) and enter a mail mode buffer.
-@item
- allow editing the group description from the group buffer
-for backends that support that.
-@item
-gnus-hide,show-all-topics
-@item
- groups and sub-topics should be allowed to mingle inside each topic,
-and not just list all subtopics at the end.
-@item
- a command to remove all read articles that are not needed to connect
-threads -- `gnus-summary-limit-to-sparse-unread'?
-@item
- a variable to turn off limiting/cutting of threads in the tree buffer.
-@item
- a variable to limit how many files are uudecoded.
-@item
- add zombie groups to a special "New Groups" topic.
-@item
- server mode command: close/open all connections
-@item
- put a file date in gnus-score-alist and check whether the file
-has been changed before using it.
-@item
- on exit from a digest group, go to the next article in the parent group.
-@item
- hide (sub)threads with low score.
-@item
- when expiring, remove all marks from expired articles.
-@item
- gnus-summary-limit-to-body
-@item
- a regexp alist that says what level groups are to be subscribed
-on. Eg. -- `(("nnml:" . 1))'.
-@item
- easier interface to nnkiboze to create ephemeral groups that
-contain groups that match a regexp.
-@item
- allow newlines in <URL:> urls, but remove them before using
-the URL.
-@item
- If there is no From line, the mail backends should fudge one from the
-"From " line.
-@item
- fuzzy simplifying should strip all non-alpha-numerical info
-from subject lines.
-@item
- gnus-soup-brew-soup-with-high-scores.
-@item
- nntp-ping-before-connect
-@item
- command to check whether NOV is evil. "list overview.fmt".
-@item
- when entering a group, Gnus should look through the score
-files very early for `local' atoms and set those local variables.
-@item
- message annotations.
-@item
- topics are always yanked before groups, and that's not good.
-@item
- (set-extent-property extent 'help-echo "String to display in minibuf")
-to display help in the minibuffer on buttons under XEmacs.
-@item
- allow group line format spec to say how many articles there
-are in the cache.
-@item
- AUTHINFO GENERIC
-@item
- `run-with-idle-timer' in gnus-demon.
-@item
- stop using invisible text properties and start using overlays instead
-@item
- C-c C-f C-e to add an Expires header.
-@item
- go from one group to the next; everything is expunged; go to the
-next group instead of going to the group buffer.
-@item
- gnus-renumber-cache -- to renumber the cache using "low" numbers.
-@item
- record topic changes in the dribble buffer.
-@item
- `nnfolder-generate-active-file' should look at the folders it
-finds and generate proper active ranges.
-@item
- nneething-look-in-files-for-article-heads variable to control
-whether nneething should sniff all files in the directories.
-@item
- gnus-fetch-article -- start Gnus, enter group, display article
-@item
- gnus-dont-move-articles-to-same-group variable when respooling.
-@item
- when messages are crossposted between several auto-expirable groups,
-articles aren't properly marked as expirable.
-@item
- nneething should allow deletion/moving.
-@item
- TAB on the last button should go to the first button.
-@item
- if the car of an element in `mail-split-methods' is a function,
-and the function returns non-nil, use that as the name of the group(s) to
-save mail in.
-@item
- command for listing all score files that have been applied.
-@item
- a command in the article buffer to return to `summary' config.
-@item
- `gnus-always-post-using-current-server' -- variable to override
-`C-c C-c' when posting.
-@item
- nnmail-group-spool-alist -- says where each group should use
-as a spool file.
-@item
- when an article is crossposted to an auto-expirable group, the article
-should be marker as expirable.
-@item
- article mode command/menu for "send region as URL to browser".
-@item
- on errors, jump to info nodes that explain the error. For instance,
-on invalid From headers, or on error messages from the nntp server.
-@item
- when gathering threads, make the article that has no "Re: " the parent.
-Also consult Date headers.
-@item
- a token in splits to call shrink-window-if-larger-than-buffer
-@item
- `1 0 A M' to do matches on the active hashtb.
-@item
- duplicates -- command to remove Gnus-Warning header, use the read
-Message-ID, delete the "original".
-@item
- when replying to several messages at once, put the "other" message-ids
-into a See-Also header.
-@item
- support setext: URL:http://www.bsdi.com/setext/
-@item
- support ProleText: <URL:http://proletext.clari.net/prole/proletext.html>
-@item
- when browsing a foreign server, the groups that are already subscribed
-should be listed as such and not as "K".
-@item
- generate font names dynamically.
-@item
- score file mode auto-alist.
-@item
- allow nndoc to change/add/delete things from documents. Implement
-methods for each format for adding an article to the document.
-@item
- `gnus-fetch-old-headers' `all' value to incorporate
-absolutely all headers there is.
-@item
- function like `|', but concatenate all marked articles
-and pipe them to the process.
-@item
- cache the list of killed (or active) groups in a separate file. Update
-the file whenever we read the active file or the list
-of killed groups in the .eld file reaches a certain length.
-@item
- function for starting to edit a file to put into
-the current mail group.
-@item
- score-find-trace should display the total score of the article.
-@item
- "ghettozie" -- score on Xref header and nix it out after using it
-to avoid marking as read in other groups it has been crossposted to.
-@item
- look at procmail splitting. The backends should create
-the groups automatically if a spool file exists for that group.
-@item
- function for backends to register themselves with Gnus.
-@item
- when replying to several process-marked articles,
-have all the From end up in Cc headers? Variable to toggle.
-@item
- command to delete a crossposted mail article from all
-groups it has been mailed to.
-@item
- `B c' and `B m' should be crosspost aware.
-@item
- hide-pgp should also hide PGP public key blocks.
-@item
- Command in the group buffer to respool process-marked groups.
-@item
- `gnus-summary-find-matching' should accept
-pseudo-"headers" like "body", "head" and "all"
-@item
- When buttifying <URL: > things, all white space (including
-newlines) should be ignored.
-@item
- Process-marking all groups in a topic should process-mark
-groups in subtopics as well.
-@item
- Add non-native groups to the list of killed groups when killing them.
-@item
- nntp-suggest-kewl-config to probe the nntp server and suggest
-variable settings.
-@item
- add edit and forward secondary marks.
-@item
- nnml shouldn't visit its .overview files.
-@item
- allow customizing sorting within gathered threads.
-@item
- `B q' shouldn't select the current article.
-@item
- nnmbox should support a newsgroups file for descriptions.
-@item
- allow fetching mail from several pop servers.
-@item
- Be able to specify whether the saving commands save the original
-or the formatted article.
-@item
- a command to reparent with the child process-marked (cf. `T ^'.).
-@item
- I think the possibility to send a password with nntp-open-rlogin
-should be a feature in Red Gnus.
-@item
- The `Z n' command should be possible to execute from a mouse click.
-@item
- more limiting functions -- date, etc.
-@item
- be able to limit on a random header; on body; using reverse matches.
-@item
- a group parameter (`absofucking-total-expiry') that will make Gnus expire
-even unread articles.
-@item
- a command to print the article buffer as postscript.
-@item
- variable to disable password fetching when opening by nntp-open-telnet.
-@item
- manual: more example servers -- nntp with rlogin, telnet
-@item
- checking for bogus groups should clean topic alists as well.
-@item
- canceling articles in foreign groups.
-@item
- article number in folded topics isn't properly updated by
-Xref handling.
-@item
- Movement in the group buffer to the next unread group should go to the
-next closed topic with unread messages if no group can be found.
-@item
- Extensive info pages generated on the fly with help everywhere --
-in the "*Gnus edit*" buffers, for instance.
-@item
- Topic movement commands -- like thread movement. Up, down, forward, next.
-@item
- a way to tick/mark as read Gcc'd articles.
-@item
- a way to say that all groups within a specific topic comes
-from a particular server? Hm.
-@item
- `gnus-article-fill-if-long-lines' -- a function to fill
-the article buffer if there are any looong lines there.
-@item
- `T h' should jump to the parent topic and fold it.
-@item
- a command to create an ephemeral nndoc group out of a file,
-and then splitting it/moving it to some other group/backend.
-@item
- a group parameter for nnkiboze groups that says that
-all kibozed articles should be entered into the cache.
-@item
- It should also probably be possible to delimit what
-`gnus-jog-cache' does -- for instance, work on just some groups, or on
-some levels, and entering just articles that have a score higher than
-a certain number.
-@item
- nnfolder should append to the folder instead of re-writing
-the entire folder to disk when accepting new messages.
-@item
- allow all backends to do the proper thing with .gz files.
-@item
- a backend for reading collections of babyl files nnbabylfolder?
-@item
- a command for making the native groups into foreign groups.
-@item
- server mode command for clearing read marks from all groups
-from a server.
-@item
- when following up multiple articles, include all To, Cc, etc headers
-from all articles.
-@item
- a command for deciding what the total score of the current
-thread is. Also a way to highlight based on this.
-@item
- command to show and edit group scores
-@item
- a gnus-tree-minimize-horizontal to minimize tree buffers
-horizontally.
-@item
- command to generate nnml overview file for one group.
-@item
- `C-u C-u a' -- prompt for many crossposted groups.
-@item
- keep track of which mail groups have received new articles (in this session).
-Be able to generate a report and perhaps do some marking in the group
-buffer.
-@item
- gnus-build-sparse-threads to a number -- build only sparse threads
-that are of that length.
-@item
- have nnmh respect mh's unseen sequence in .mh_profile.
-@item
- cache the newsgroups descriptions locally.
-@item
- asynchronous posting under nntp.
-@item
- be able to control word adaptive scoring from the score files.
-@item
- a variable to make `C-c C-c' post using the "current" select method.
-@item
- `limit-exclude-low-scored-articles'.
+functionality
+
+@example
+(defun spam-blackbox-register-spam-routine ()
+ (spam-generic-register-routine
+ ;; the spam function
+ (lambda (article)
+ (let ((from (spam-fetch-field-from-fast article)))
+ (when (stringp from)
+ (blackbox-do-something-with-this-spammer from))))
+ ;; the ham function
+ nil))
+
+(defun spam-blackbox-register-ham-routine ()
+ (spam-generic-register-routine
+ ;; the spam function
+ nil
+ ;; the ham function
+ (lambda (article)
+ (let ((from (spam-fetch-field-from-fast article)))
+ (when (stringp from)
+ (blackbox-do-something-with-this-ham-sender from))))))
+@end example
+
+Write the @code{blackbox-do-something-with-this-ham-sender} and
+@code{blackbox-do-something-with-this-spammer} functions. You can add
+more complex code than fetching the message sender, but keep in mind
+that retrieving the whole message takes significantly longer than the
+sender through @code{spam-fetch-field-from-fast}, because the message
+senders are kept in memory by Gnus.
+
+@end enumerate
+
+
+@node Filtering Spam Using Statistics with spam-stat
+@subsection Filtering Spam Using Statistics with spam-stat
+@cindex Paul Graham
+@cindex Graham, Paul
+@cindex naive Bayesian spam filtering
+@cindex Bayesian spam filtering, naive
+@cindex spam filtering, naive Bayesian
+
+Paul Graham has written an excellent essay about spam filtering using
+statistics: @uref{http://www.paulgraham.com/spam.html,A Plan for
+Spam}. In it he describes the inherent deficiency of rule-based
+filtering as used by SpamAssassin, for example: Somebody has to write
+the rules, and everybody else has to install these rules. You are
+always late. It would be much better, he argues, to filter mail based
+on whether it somehow resembles spam or non-spam. One way to measure
+this is word distribution. He then goes on to describe a solution
+that checks whether a new mail resembles any of your other spam mails
+or not.
+
+The basic idea is this: Create a two collections of your mail, one
+with spam, one with non-spam. Count how often each word appears in
+either collection, weight this by the total number of mails in the
+collections, and store this information in a dictionary. For every
+word in a new mail, determine its probability to belong to a spam or a
+non-spam mail. Use the 15 most conspicuous words, compute the total
+probability of the mail being spam. If this probability is higher
+than a certain threshold, the mail is considered to be spam.
+
+Gnus supports this kind of filtering. But it needs some setting up.
+First, you need two collections of your mail, one with spam, one with
+non-spam. Then you need to create a dictionary using these two
+collections, and save it. And last but not least, you need to use
+this dictionary in your fancy mail splitting rules.
+
+@menu
+* Creating a spam-stat dictionary::
+* Splitting mail using spam-stat::
+* Low-level interface to the spam-stat dictionary::
+@end menu
+
+@node Creating a spam-stat dictionary
+@subsubsection Creating a spam-stat dictionary
+
+Before you can begin to filter spam based on statistics, you must
+create these statistics based on two mail collections, one with spam,
+one with non-spam. These statistics are then stored in a dictionary
+for later use. In order for these statistics to be meaningful, you
+need several hundred emails in both collections.
+
+Gnus currently supports only the nnml back end for automated dictionary
+creation. The nnml back end stores all mails in a directory, one file
+per mail. Use the following:
+
+@defun spam-stat-process-spam-directory
+Create spam statistics for every file in this directory. Every file
+is treated as one spam mail.
+@end defun
+
+@defun spam-stat-process-non-spam-directory
+Create non-spam statistics for every file in this directory. Every
+file is treated as one non-spam mail.
+@end defun
+
+Usually you would call @code{spam-stat-process-spam-directory} on a
+directory such as @file{~/Mail/mail/spam} (this usually corresponds
+the the group @samp{nnml:mail.spam}), and you would call
+@code{spam-stat-process-non-spam-directory} on a directory such as
+@file{~/Mail/mail/misc} (this usually corresponds the the group
+@samp{nnml:mail.misc}).
+
+When you are using IMAP, you won't have the mails available locally,
+so that will not work. One solution is to use the Gnus Agent to cache
+the articles. Then you can use directories such as
+@file{"~/News/agent/nnimap/mail.yourisp.com/personal_spam"} for
+@code{spam-stat-process-spam-directory}. @xref{Agent as Cache}.
+
+@defvar spam-stat
+This variable holds the hash-table with all the statistics -- the
+dictionary we have been talking about. For every word in either
+collection, this hash-table stores a vector describing how often the
+word appeared in spam and often it appeared in non-spam mails.
+@end defvar
+
+If you want to regenerate the statistics from scratch, you need to
+reset the dictionary.
+
+@defun spam-stat-reset
+Reset the @code{spam-stat} hash-table, deleting all the statistics.
+@end defun
+
+When you are done, you must save the dictionary. The dictionary may
+be rather large. If you will not update the dictionary incrementally
+(instead, you will recreate it once a month, for example), then you
+can reduce the size of the dictionary by deleting all words that did
+not appear often enough or that do not clearly belong to only spam or
+only non-spam mails.
+
+@defun spam-stat-reduce-size
+Reduce the size of the dictionary. Use this only if you do not want
+to update the dictionary incrementally.
+@end defun
+
+@defun spam-stat-save
+Save the dictionary.
+@end defun
+
+@defvar spam-stat-file
+The filename used to store the dictionary. This defaults to
+@file{~/.spam-stat.el}.
+@end defvar
+
+@node Splitting mail using spam-stat
+@subsubsection Splitting mail using spam-stat
+
+In order to use @code{spam-stat} to split your mail, you need to add the
+following to your @file{~/.gnus} file:
+
+@example
+(require 'spam-stat)
+(spam-stat-load)
+@end example
+
+This will load the necessary Gnus code, and the dictionary you
+created.
+
+Next, you need to adapt your fancy splitting rules: You need to
+determine how to use @code{spam-stat}. The following examples are for
+the nnml back end. Using the nnimap back end works just as well. Just
+use @code{nnimap-split-fancy} instead of @code{nnmail-split-fancy}.
+
+In the simplest case, you only have two groups, @samp{mail.misc} and
+@samp{mail.spam}. The following expression says that mail is either
+spam or it should go into @samp{mail.misc}. If it is spam, then
+@code{spam-stat-split-fancy} will return @samp{mail.spam}.
+
+@example
+(setq nnmail-split-fancy
+ `(| (: spam-stat-split-fancy)
+ "mail.misc"))
+@end example
+
+@defvar spam-stat-split-fancy-spam-group
+The group to use for spam. Default is @samp{mail.spam}.
+@end defvar
+
+If you also filter mail with specific subjects into other groups, use
+the following expression. Only mails not matching the regular
+expression are considered potential spam.
+
+@example
+(setq nnmail-split-fancy
+ `(| ("Subject" "\\bspam-stat\\b" "mail.emacs")
+ (: spam-stat-split-fancy)
+ "mail.misc"))
+@end example
+
+If you want to filter for spam first, then you must be careful when
+creating the dictionary. Note that @code{spam-stat-split-fancy} must
+consider both mails in @samp{mail.emacs} and in @samp{mail.misc} as
+non-spam, therefore both should be in your collection of non-spam
+mails, when creating the dictionary!
+
+@example
+(setq nnmail-split-fancy
+ `(| (: spam-stat-split-fancy)
+ ("Subject" "\\bspam-stat\\b" "mail.emacs")
+ "mail.misc"))
+@end example
+
+You can combine this with traditional filtering. Here, we move all
+HTML-only mails into the @samp{mail.spam.filtered} group. Note that since
+@code{spam-stat-split-fancy} will never see them, the mails in
+@samp{mail.spam.filtered} should be neither in your collection of spam mails,
+nor in your collection of non-spam mails, when creating the
+dictionary!
+
+@example
+(setq nnmail-split-fancy
+ `(| ("Content-Type" "text/html" "mail.spam.filtered")
+ (: spam-stat-split-fancy)
+ ("Subject" "\\bspam-stat\\b" "mail.emacs")
+ "mail.misc"))
+@end example
+
+
+@node Low-level interface to the spam-stat dictionary
+@subsubsection Low-level interface to the spam-stat dictionary
+
+The main interface to using @code{spam-stat}, are the following functions:
+
+@defun spam-stat-buffer-is-spam
+Called in a buffer, that buffer is considered to be a new spam mail.
+Use this for new mail that has not been processed before.
+@end defun
+
+@defun spam-stat-buffer-is-no-spam
+Called in a buffer, that buffer is considered to be a new non-spam
+mail. Use this for new mail that has not been processed before.
+@end defun
+
+@defun spam-stat-buffer-change-to-spam
+Called in a buffer, that buffer is no longer considered to be normal
+mail but spam. Use this to change the status of a mail that has
+already been processed as non-spam.
+@end defun
+
+@defun spam-stat-buffer-change-to-non-spam
+Called in a buffer, that buffer is no longer considered to be spam but
+normal mail. Use this to change the status of a mail that has already
+been processed as spam.
+@end defun
+
+@defun spam-stat-save
+Save the hash table to the file. The filename used is stored in the
+variable @code{spam-stat-file}.
+@end defun
+
+@defun spam-stat-load
+Load the hash table from a file. The filename used is stored in the
+variable @code{spam-stat-file}.
+@end defun
+
+@defun spam-stat-score-word
+Return the spam score for a word.
+@end defun
+
+@defun spam-stat-score-buffer
+Return the spam score for a buffer.
+@end defun
+
+@defun spam-stat-split-fancy
+Use this function for fancy mail splitting. Add the rule @samp{(:
+spam-stat-split-fancy)} to @code{nnmail-split-fancy}
+@end defun
+
+Make sure you load the dictionary before using it. This requires the
+following in your @file{~/.gnus} file:
+
+@example
+(require 'spam-stat)
+(spam-stat-load)
+@end example
+
+Typical test will involve calls to the following functions:
+
+@example
+Reset: (setq spam-stat (make-hash-table :test 'equal))
+Learn spam: (spam-stat-process-spam-directory "~/Mail/mail/spam")
+Learn non-spam: (spam-stat-process-non-spam-directory "~/Mail/mail/misc")
+Save table: (spam-stat-save)
+File size: (nth 7 (file-attributes spam-stat-file))
+Number of words: (hash-table-count spam-stat)
+Test spam: (spam-stat-test-directory "~/Mail/mail/spam")
+Test non-spam: (spam-stat-test-directory "~/Mail/mail/misc")
+Reduce table size: (spam-stat-reduce-size)
+Save table: (spam-stat-save)
+File size: (nth 7 (file-attributes spam-stat-file))
+Number of words: (hash-table-count spam-stat)
+Test spam: (spam-stat-test-directory "~/Mail/mail/spam")
+Test non-spam: (spam-stat-test-directory "~/Mail/mail/misc")
+@end example
+
+Here is how you would create your dictionary:
+
+@example
+Reset: (setq spam-stat (make-hash-table :test 'equal))
+Learn spam: (spam-stat-process-spam-directory "~/Mail/mail/spam")
+Learn non-spam: (spam-stat-process-non-spam-directory "~/Mail/mail/misc")
+Repeat for any other non-spam group you need...
+Reduce table size: (spam-stat-reduce-size)
+Save table: (spam-stat-save)
+@end example
+
+@node Various Various
+@section Various Various
+@cindex mode lines
+@cindex highlights
+
+@table @code
+
+@item gnus-home-directory
+All Gnus file and directory variables will be initialized from this
+variable, which defaults to @file{~/}.
+
+@item gnus-directory
+@vindex gnus-directory
+Most Gnus storage file and directory variables will be initialized from
+this variable, which defaults to the @samp{SAVEDIR} environment
+variable, or @file{~/News/} if that variable isn't set.
+
+Note that Gnus is mostly loaded when the @file{.gnus.el} file is read.
+This means that other directory variables that are initialized from this
+variable won't be set properly if you set this variable in
+@file{.gnus.el}. Set this variable in @file{.emacs} instead.
+
+@item gnus-default-directory
+@vindex gnus-default-directory
+Not related to the above variable at all---this variable says what the
+default directory of all Gnus buffers should be. If you issue commands
+like @kbd{C-x C-f}, the prompt you'll get starts in the current buffer's
+default directory. If this variable is @code{nil} (which is the
+default), the default directory will be the default directory of the
+buffer you were in when you started Gnus.
+
+@item gnus-verbose
+@vindex gnus-verbose
+This variable is an integer between zero and ten. The higher the value,
+the more messages will be displayed. If this variable is zero, Gnus
+will never flash any messages, if it is seven (which is the default),
+most important messages will be shown, and if it is ten, Gnus won't ever
+shut up, but will flash so many messages it will make your head swim.
+
+@item gnus-verbose-backends
+@vindex gnus-verbose-backends
+This variable works the same way as @code{gnus-verbose}, but it applies
+to the Gnus back ends instead of Gnus proper.
+
+@item nnheader-max-head-length
+@vindex nnheader-max-head-length
+When the back ends read straight heads of articles, they all try to read
+as little as possible. This variable (default 4096) specifies
+the absolute max length the back ends will try to read before giving up
+on finding a separator line between the head and the body. If this
+variable is @code{nil}, there is no upper read bound. If it is
+@code{t}, the back ends won't try to read the articles piece by piece,
+but read the entire articles. This makes sense with some versions of
+@code{ange-ftp} or @code{efs}.
+
+@item nnheader-head-chop-length
+@vindex nnheader-head-chop-length
+This variable (default 2048) says how big a piece of each article to
+read when doing the operation described above.
+
+@item nnheader-file-name-translation-alist
+@vindex nnheader-file-name-translation-alist
+@cindex file names
+@cindex invalid characters in file names
+@cindex characters in file names
+This is an alist that says how to translate characters in file names.
+For instance, if @samp{:} is invalid as a file character in file names
+on your system (you OS/2 user you), you could say something like:
+
+@lisp
+(setq nnheader-file-name-translation-alist
+ '((?: . ?_)))
+@end lisp
+
+In fact, this is the default value for this variable on OS/2 and MS
+Windows (phooey) systems.
+
+@item gnus-hidden-properties
+@vindex gnus-hidden-properties
+This is a list of properties to use to hide ``invisible'' text. It is
+@code{(invisible t intangible t)} by default on most systems, which
+makes invisible text invisible and intangible.
+
+@item gnus-parse-headers-hook
+@vindex gnus-parse-headers-hook
+A hook called before parsing headers. It can be used, for instance, to
+gather statistics on the headers fetched, or perhaps you'd like to prune
+some headers. I don't see why you'd want that, though.
+
+@item gnus-shell-command-separator
+@vindex gnus-shell-command-separator
+String used to separate two shell commands. The default is @samp{;}.
+
+@item gnus-invalid-group-regexp
+@vindex gnus-invalid-group-regexp
+
+Regexp to match ``invalid'' group names when querying user for a group
+name. The default value catches some @strong{really} invalid group
+names who could possibly mess up Gnus internally (like allowing
+@samp{:} in a group name, which is normally used to delimit method and
+group).
+
+@sc{imap} users might want to allow @samp{/} in group names though.
+
+
+@end table
+
+@node The End
+@chapter The End
+
+Well, that's the manual---you can get on with your life now. Keep in
+touch. Say hello to your cats from me.
+
+My @strong{ghod}---I just can't stand goodbyes. Sniffle.
+
+Ol' Charles Reznikoff said it pretty well, so I leave the floor to him:
+
+@quotation
+@strong{Te Deum}
+
+@sp 1
+Not because of victories @*
+I sing,@*
+having none,@*
+but for the common sunshine,@*
+the breeze,@*
+the largess of the spring.
+
+@sp 1
+Not for victory@*
+but for the day's work done@*
+as well as I was able;@*
+not for a seat upon the dais@*
+but at the common table.@*
+@end quotation
+
+
+@node Appendices
+@chapter Appendices
+
+@menu
+* XEmacs:: Requirements for installing under XEmacs.
+* History:: How Gnus got where it is today.
+* On Writing Manuals:: Why this is not a beginner's guide.
+* Terminology:: We use really difficult, like, words here.
+* Customization:: Tailoring Gnus to your needs.
+* Troubleshooting:: What you might try if things do not work.
+* Gnus Reference Guide:: Rilly, rilly technical stuff.
+* Emacs for Heathens:: A short introduction to Emacsian terms.
+* Frequently Asked Questions::
+@end menu
+
+
+@node XEmacs
+@section XEmacs
+@cindex XEmacs
+@cindex Installing under XEmacs
+
+XEmacs is distributed as a collection of packages. You should install
+whatever packages the Gnus XEmacs package requires. The current
+requirements are @samp{gnus}, @samp{w3}, @samp{mh-e},
+@samp{mailcrypt}, @samp{rmail}, @samp{eterm}, @samp{mail-lib},
+@samp{xemacs-base}, @samp{sh-script} and @samp{fsf-compat}. The
+@samp{misc-games} package is required for Morse decoding.
+
+
+@node History
+@section History
+
+@cindex history
+@sc{gnus} was written by Masanobu @sc{Umeda}. When autumn crept up in
+'94, Lars Magne Ingebrigtsen grew bored and decided to rewrite Gnus.
+
+If you want to investigate the person responsible for this outrage,
+you can point your (feh!) web browser to
+@uref{http://quimby.gnus.org/}. This is also the primary
+distribution point for the new and spiffy versions of Gnus, and is
+known as The Site That Destroys Newsrcs And Drives People Mad.
+
+During the first extended alpha period of development, the new Gnus was
+called ``(ding) Gnus''. @dfn{(ding)} is, of course, short for
+@dfn{ding is not Gnus}, which is a total and utter lie, but who cares?
+(Besides, the ``Gnus'' in this abbreviation should probably be
+pronounced ``news'' as @sc{Umeda} intended, which makes it a more
+appropriate name, don't you think?)
+
+In any case, after spending all that energy on coming up with a new and
+spunky name, we decided that the name was @emph{too} spunky, so we
+renamed it back again to ``Gnus''. But in mixed case. ``Gnus'' vs.
+``@sc{gnus}''. New vs. old.
+
+@menu
+* Gnus Versions:: What Gnus versions have been released.
+* Other Gnus Versions:: Other Gnus versions that also have been released.
+* Why?:: What's the point of Gnus?
+* Compatibility:: Just how compatible is Gnus with @sc{gnus}?
+* Conformity:: Gnus tries to conform to all standards.
+* Emacsen:: Gnus can be run on a few modern Emacsen.
+* Gnus Development:: How Gnus is developed.
+* Contributors:: Oodles of people.
+* New Features:: Pointers to some of the new stuff in Gnus.
+@end menu
+
+
+@node Gnus Versions
+@subsection Gnus Versions
+@cindex ding Gnus
+@cindex September Gnus
+@cindex Red Gnus
+@cindex Quassia Gnus
+@cindex Pterodactyl Gnus
+@cindex Oort Gnus
+@cindex No Gnus
+
+The first ``proper'' release of Gnus 5 was done in November 1995 when it
+was included in the Emacs 19.30 distribution (132 (ding) Gnus releases
+plus 15 Gnus 5.0 releases).
+
+In May 1996 the next Gnus generation (aka. ``September Gnus'' (after 99
+releases)) was released under the name ``Gnus 5.2'' (40 releases).
+
+On July 28th 1996 work on Red Gnus was begun, and it was released on
+January 25th 1997 (after 84 releases) as ``Gnus 5.4'' (67 releases).
+
+On September 13th 1997, Quassia Gnus was started and lasted 37 releases.
+If was released as ``Gnus 5.6'' on March 8th 1998 (46 releases).
+
+Gnus 5.6 begat Pterodactyl Gnus on August 29th 1998 and was released as
+``Gnus 5.8'' (after 99 releases and a CVS repository) on December 3rd
+1999.
+
+On the 26th of October 2000, Oort Gnus was begun.
+
+If you happen upon a version of Gnus that has a prefixed name --
+``(ding) Gnus'', ``September Gnus'', ``Red Gnus'', ``Quassia Gnus'',
+``Pterodactyl Gnus'', ``Oort Gnus'' -- don't panic. Don't let it know
+that you're frightened. Back away. Slowly. Whatever you do, don't
+run. Walk away, calmly, until you're out of its reach. Find a proper
+released version of Gnus and snuggle up to that instead.
+
+
+@node Other Gnus Versions
+@subsection Other Gnus Versions
+@cindex Semi-gnus
+
+In addition to the versions of Gnus which have had their releases
+coordinated by Lars, one major development has been Semi-gnus from
+Japan. It's based on a library called @sc{semi}, which provides
+@sc{mime} capabilities.
+
+These Gnusae are based mainly on Gnus 5.6 and Pterodactyl Gnus.
+Collectively, they are called ``Semi-gnus'', and different strains are
+called T-gnus, ET-gnus, Nana-gnus and Chaos. These provide powerful
+@sc{mime} and multilingualization things, especially important for
+Japanese users.
+
+
+@node Why?
+@subsection Why?
+
+What's the point of Gnus?
+
+I want to provide a ``rad'', ``happening'', ``way cool'' and ``hep''
+newsreader, that lets you do anything you can think of. That was my
+original motivation, but while working on Gnus, it has become clear to
+me that this generation of newsreaders really belong in the stone age.
+Newsreaders haven't developed much since the infancy of the net. If the
+volume continues to rise with the current rate of increase, all current
+newsreaders will be pretty much useless. How do you deal with
+newsgroups that have thousands of new articles each day? How do you
+keep track of millions of people who post?
+
+Gnus offers no real solutions to these questions, but I would very much
+like to see Gnus being used as a testing ground for new methods of
+reading and fetching news. Expanding on @sc{Umeda}-san's wise decision
+to separate the newsreader from the back ends, Gnus now offers a simple
+interface for anybody who wants to write new back ends for fetching mail
+and news from different sources. I have added hooks for customizations
+everywhere I could imagine it being useful. By doing so, I'm inviting
+every one of you to explore and invent.
+
+May Gnus never be complete. @kbd{C-u 100 M-x all-hail-emacs} and
+@kbd{C-u 100 M-x all-hail-xemacs}.
+
+
+@node Compatibility
+@subsection Compatibility
+
+@cindex compatibility
+Gnus was designed to be fully compatible with @sc{gnus}. Almost all key
+bindings have been kept. More key bindings have been added, of course,
+but only in one or two obscure cases have old bindings been changed.
+
+Our motto is:
+@quotation
+@cartouche
+@center In a cloud bones of steel.
+@end cartouche
+@end quotation
+
+All commands have kept their names. Some internal functions have changed
+their names.
+
+The @code{gnus-uu} package has changed drastically. @xref{Decoding
+Articles}.
+
+One major compatibility question is the presence of several summary
+buffers. All variables relevant while reading a group are
+buffer-local to the summary buffer they belong in. Although many
+important variables have their values copied into their global
+counterparts whenever a command is executed in the summary buffer, this
+change might lead to incorrect values being used unless you are careful.
+
+All code that relies on knowledge of @sc{gnus} internals will probably
+fail. To take two examples: Sorting @code{gnus-newsrc-alist} (or
+changing it in any way, as a matter of fact) is strictly verboten. Gnus
+maintains a hash table that points to the entries in this alist (which
+speeds up many functions), and changing the alist directly will lead to
+peculiar results.
+
+@cindex hilit19
+@cindex highlighting
+Old hilit19 code does not work at all. In fact, you should probably
+remove all hilit code from all Gnus hooks
+(@code{gnus-group-prepare-hook} and @code{gnus-summary-prepare-hook}).
+Gnus provides various integrated functions for highlighting. These are
+faster and more accurate. To make life easier for everybody, Gnus will
+by default remove all hilit calls from all hilit hooks. Uncleanliness!
+Away!
+
+Packages like @code{expire-kill} will no longer work. As a matter of
+fact, you should probably remove all old @sc{gnus} packages (and other
+code) when you start using Gnus. More likely than not, Gnus already
+does what you have written code to make @sc{gnus} do. (Snicker.)
+
+Even though old methods of doing things are still supported, only the
+new methods are documented in this manual. If you detect a new method of
+doing something while reading this manual, that does not mean you have
+to stop doing it the old way.
+
+Gnus understands all @sc{gnus} startup files.
+
+@kindex M-x gnus-bug
+@findex gnus-bug
+@cindex reporting bugs
+@cindex bugs
+Overall, a casual user who hasn't written much code that depends on
+@sc{gnus} internals should suffer no problems. If problems occur,
+please let me know by issuing that magic command @kbd{M-x gnus-bug}.
+
+@vindex gnus-bug-create-help-buffer
+If you are in the habit of sending bug reports @emph{very} often, you
+may find the helpful help buffer annoying after a while. If so, set
+@code{gnus-bug-create-help-buffer} to @code{nil} to avoid having it pop
+up at you.
+
+
+@node Conformity
+@subsection Conformity
+
+No rebels without a clue here, ma'am. We conform to all standards known
+to (wo)man. Except for those standards and/or conventions we disagree
+with, of course.
+
+@table @strong
+
+@item RFC (2)822
+@cindex RFC 822
+@cindex RFC 2822
+There are no known breaches of this standard.
+
+@item RFC 1036
+@cindex RFC 1036
+There are no known breaches of this standard, either.
+
+@item Son-of-RFC 1036
+@cindex Son-of-RFC 1036
+We do have some breaches to this one.
+
+@table @emph
+
+@item X-Newsreader
+@itemx User-Agent
+These are considered to be ``vanity headers'', while I consider them
+to be consumer information. After seeing so many badly formatted
+articles coming from @code{tin} and @code{Netscape} I know not to use
+either of those for posting articles. I would not have known that if
+it wasn't for the @code{X-Newsreader} header.
+@end table
+
+@item USEFOR
+@cindex USEFOR
+USEFOR is an IETF working group writing a successor to RFC 1036, based
+on Son-of-RFC 1036. They have produced a number of drafts proposing
+various changes to the format of news articles. The Gnus towers will
+look into implementing the changes when the draft is accepted as an RFC.
+
+@item MIME - RFC 2045-2049 etc
+@cindex MIME
+All the various @sc{mime} RFCs are supported.
+
+@item Disposition Notifications - RFC 2298
+Message Mode is able to request notifications from the receiver.
+
+@item PGP - RFC 1991 and RFC 2440
+@cindex RFC 1991
+@cindex RFC 2440
+RFC 1991 is the original PGP message specification, published as a
+Information RFC. RFC 2440 was the follow-up, now called Open PGP, and
+put on the Standards Track. Both document a non-@sc{mime} aware PGP
+format. Gnus supports both encoding (signing and encryption) and
+decoding (verification and decryption).
+
+@item PGP/MIME - RFC 2015/3156
+RFC 2015 (superseded by 3156 which references RFC 2440 instead of RFC
+1991) describes the @sc{mime}-wrapping around the RF 1991/2440 format.
+Gnus supports both encoding and decoding.
+
+@item S/MIME - RFC 2633
+RFC 2633 describes the @sc{s/mime} format.
+
+@item IMAP - RFC 1730/2060, RFC 2195, RFC 2086, RFC 2359, RFC 2595, RFC 1731
+RFC 1730 is @sc{imap} version 4, updated somewhat by RFC 2060 (@sc{imap} 4
+revision 1). RFC 2195 describes CRAM-MD5 authentication for @sc{imap}. RFC
+2086 describes access control lists (ACLs) for @sc{imap}. RFC 2359
+describes a @sc{imap} protocol enhancement. RFC 2595 describes the proper
+TLS integration (STARTTLS) with @sc{imap}. RFC 1731 describes the
+GSSAPI/Kerberos4 mechanisms for @sc{imap}.
+
+@end table
+
+If you ever notice Gnus acting non-compliant with regards to the texts
+mentioned above, don't hesitate to drop a note to Gnus Towers and let us
+know.
+
+
+@node Emacsen
+@subsection Emacsen
+@cindex Emacsen
+@cindex XEmacs
+@cindex Mule
+@cindex Emacs
+
+Gnus should work on :
+
+@itemize @bullet
+
@item
- if `gnus-summary-show-thread' is a number, hide threads that have
-a score lower than this number.
+Emacs 20.3 and up.
+
@item
- split newsgroup subscription variable up into "order" and "method".
+XEmacs 20.4 and up.
+
+@end itemize
+
+This Gnus version will absolutely not work on any Emacsen older than
+that. Not reliably, at least. Older versions of Gnus may work on older
+Emacs versions.
+
+There are some vague differences between Gnus on the various
+platforms---XEmacs features more graphics (a logo and a toolbar)---but
+other than that, things should look pretty much the same under all
+Emacsen.
+
+
+@node Gnus Development
+@subsection Gnus Development
+
+Gnus is developed in a two-phased cycle. The first phase involves much
+discussion on the @samp{ding@@gnus.org} mailing list, where people
+propose changes and new features, post patches and new back ends. This
+phase is called the @dfn{alpha} phase, since the Gnusae released in this
+phase are @dfn{alpha releases}, or (perhaps more commonly in other
+circles) @dfn{snapshots}. During this phase, Gnus is assumed to be
+unstable and should not be used by casual users. Gnus alpha releases
+have names like ``Red Gnus'' and ``Quassia Gnus''.
+
+After futzing around for 50-100 alpha releases, Gnus is declared
+@dfn{frozen}, and only bug fixes are applied. Gnus loses the prefix,
+and is called things like ``Gnus 5.6.32'' instead. Normal people are
+supposed to be able to use these, and these are mostly discussed on the
+@samp{gnu.emacs.gnus} newsgroup.
+
+@cindex Incoming*
+@vindex mail-source-delete-incoming
+Some variable defaults differ between alpha Gnusae and released Gnusae.
+In particular, @code{mail-source-delete-incoming} defaults to @code{nil} in
+alpha Gnusae and @code{t} in released Gnusae. This is to prevent
+lossage of mail if an alpha release hiccups while handling the mail.
+
+The division of discussion between the ding mailing list and the Gnus
+newsgroup is not purely based on publicity concerns. It's true that
+having people write about the horrible things that an alpha Gnus release
+can do (sometimes) in a public forum may scare people off, but more
+importantly, talking about new experimental features that have been
+introduced may confuse casual users. New features are frequently
+introduced, fiddled with, and judged to be found wanting, and then
+either discarded or totally rewritten. People reading the mailing list
+usually keep up with these rapid changes, while people on the newsgroup
+can't be assumed to do so.
+
+
+
+@node Contributors
+@subsection Contributors
+@cindex contributors
+
+The new Gnus version couldn't have been done without the help of all the
+people on the (ding) mailing list. Every day for over a year I have
+gotten billions of nice bug reports from them, filling me with joy,
+every single one of them. Smooches. The people on the list have been
+tried beyond endurance, what with my ``oh, that's a neat idea <type
+type>, yup, I'll release it right away <ship off> no wait, that doesn't
+work at all <type type>, yup, I'll ship that one off right away <ship
+off> no, wait, that absolutely does not work'' policy for releases.
+Micro$oft---bah. Amateurs. I'm @emph{much} worse. (Or is that
+``worser''? ``much worser''? ``worsest''?)
+
+I would like to take this opportunity to thank the Academy for... oops,
+wrong show.
+
+@itemize @bullet
+
@item
- buttonize ange-ftp file names.
+Masanobu @sc{Umeda}---the writer of the original @sc{gnus}.
+
@item
- a command to make a duplicate copy of the current article
-so that each copy can be edited separately.
+Shenghuo Zhu---uudecode.el, mm-uu.el, rfc1843.el, webmail.el,
+nnwarchive and many, many other things connected with @sc{mime} and
+other types of en/decoding, as well as general bug fixing, new
+functionality and stuff.
+
@item
- nnweb should allow fetching from the local nntp server.
+Per Abrahamsen---custom, scoring, highlighting and @sc{soup} code (as
+well as numerous other things).
+
@item
- record the sorting done in the summary buffer so that
-it can be repeated when limiting/regenerating the buffer.
+Luis Fernandes---design and graphics.
+
@item
- nnml-generate-nov-databses should generate for
-all nnml servers.
+Joe Reiss---creator of the smiley faces.
+
@item
- when the user does commands in the group buffer, check
-the modification time of the .newsrc.eld file and use
-ask-user-about-supersession-threat. Also warn when trying
-to save .newsrc.eld and it has changed.
+Justin Sheehy--the FAQ maintainer.
+
@item
- M-g on a topic will display all groups with 0 articles in
-the topic.
+Erik Naggum---help, ideas, support, code and stuff.
+
@item
- command to remove all topic stuff.
+Wes Hardaker---@file{gnus-picon.el} and the manual section on
+@dfn{picons} (@pxref{Picons}).
+
@item
- allow exploding incoming digests when reading incoming mail
-and splitting the resulting digests.
+Kim-Minh Kaplan---further work on the picon code.
+
@item
- nnsoup shouldn't set the `message-' variables.
+Brad Miller---@file{gnus-gl.el} and the GroupLens manual section
+(@pxref{GroupLens}).
+
@item
- command to nix out all nnoo state information.
+Sudish Joseph---innumerable bug fixes.
+
@item
- nnmail-process-alist that calls functions if group names
-matches an alist -- before saving.
+Ilja Weis---@file{gnus-topic.el}.
+
@item
- use buffer-invisibility-spec everywhere for hiding text.
+Steven L. Baur---lots and lots and lots of bugs detections and fixes.
+
@item
- variable to activate each group before entering them
-to get the (new) number of articles. `gnus-activate-before-entering'.
+Vladimir Alexiev---the refcard and reference booklets.
+
@item
- command to fetch a Message-ID from any buffer, even
-starting Gnus first if necessary.
+Felix Lee & Jamie Zawinski---I stole some pieces from the XGnus
+distribution by Felix Lee and JWZ.
+
@item
- when posting and checking whether a group exists or not, just
-ask the nntp server instead of relying on the active hashtb.
+Scott Byer---@file{nnfolder.el} enhancements & rewrite.
+
@item
- buttonize the output of `C-c C-a' in an apropos-like way.
+Peter Mutsaers---orphan article scoring code.
+
@item
- `G p' should understand process/prefix, and allow editing
-of several groups at once.
+Ken Raeburn---POP mail support.
+
@item
- command to create an ephemeral nnvirtual group that
-matches some regexp(s).
+Hallvard B Furuseth---various bits and pieces, especially dealing with
+.newsrc files.
+
@item
- nndoc should understand "Content-Type: message/rfc822" forwarded messages.
+Brian Edmonds---@file{gnus-bbdb.el}.
+
@item
- it should be possible to score "thread" on the From header.
+David Moore---rewrite of @file{nnvirtual.el} and many other things.
+
@item
- hitting RET on a "gnus-uu-archive" pseudo article should unpack it.
+Kevin Davidson---came up with the name @dfn{ding}, so blame him.
+
@item
- `B i' should display the article at once in the summary buffer.
+François Pinard---many, many interesting and thorough bug reports, as
+well as autoconf support.
+
+@end itemize
+
+This manual was proof-read by Adrian Aichner, with Ricardo Nassif, Mark
+Borges, and Jost Krieger proof-reading parts of the manual.
+
+The following people have contributed many patches and suggestions:
+
+Christopher Davis,
+Andrew Eskilsson,
+Kai Grossjohann,
+David Kågedal,
+Richard Pieri,
+Fabrice Popineau,
+Daniel Quinlan,
+Jason L. Tibbitts, III,
+and
+Jack Vinson.
+
+Also thanks to the following for patches and stuff:
+
+Jari Aalto,
+Adrian Aichner,
+Vladimir Alexiev,
+Russ Allbery,
+Peter Arius,
+Matt Armstrong,
+Marc Auslander,
+Miles Bader,
+Alexei V. Barantsev,
+Frank Bennett,
+Robert Bihlmeyer,
+Chris Bone,
+Mark Borges,
+Mark Boyns,
+Lance A. Brown,
+Rob Browning,
+Kees de Bruin,
+Martin Buchholz,
+Joe Buehler,
+Kevin Buhr,
+Alastair Burt,
+Joao Cachopo,
+Zlatko Calusic,
+Massimo Campostrini,
+Castor,
+David Charlap,
+Dan Christensen,
+Kevin Christian,
+Jae-you Chung, @c ?
+James H. Cloos, Jr.,
+Laura Conrad,
+Michael R. Cook,
+Glenn Coombs,
+Andrew J. Cosgriff,
+Neil Crellin,
+Frank D. Cringle,
+Geoffrey T. Dairiki,
+Andre Deparade,
+Ulrik Dickow,
+Dave Disser,
+Rui-Tao Dong, @c ?
+Joev Dubach,
+Michael Welsh Duggan,
+Dave Edmondson,
+Paul Eggert,
+Mark W. Eichin,
+Karl Eichwalder,
+Enami Tsugutomo, @c Enami
+Michael Ernst,
+Luc Van Eycken,
+Sam Falkner,
+Nelson Jose dos Santos Ferreira,
+Sigbjorn Finne,
+Sven Fischer,
+Paul Fisher,
+Decklin Foster,
+Gary D. Foster,
+Paul Franklin,
+Guy Geens,
+Arne Georg Gleditsch,
+David S. Goldberg,
+Michelangelo Grigni,
+Dale Hagglund,
+D. Hall,
+Magnus Hammerin,
+Kenichi Handa, @c Handa
+Raja R. Harinath,
+Yoshiki Hayashi, @c ?
+P. E. Jareth Hein,
+Hisashige Kenji, @c Hisashige
+Scott Hofmann,
+Marc Horowitz,
+Gunnar Horrigmo,
+Richard Hoskins,
+Brad Howes,
+Miguel de Icaza,
+François Felix Ingrand,
+Tatsuya Ichikawa, @c ?
+Ishikawa Ichiro, @c Ishikawa
+Lee Iverson,
+Iwamuro Motonori, @c Iwamuro
+Rajappa Iyer,
+Andreas Jaeger,
+Adam P. Jenkins,
+Randell Jesup,
+Fred Johansen,
+Gareth Jones,
+Simon Josefsson,
+Greg Klanderman,
+Karl Kleinpaste,
+Michael Klingbeil,
+Peter Skov Knudsen,
+Shuhei Kobayashi, @c Kobayashi
+Petr Konecny,
+Koseki Yoshinori, @c Koseki
+Thor Kristoffersen,
+Jens Lautenbacher,
+Martin Larose,
+Seokchan Lee, @c Lee
+Joerg Lenneis,
+Carsten Leonhardt,
+James LewisMoss,
+Christian Limpach,
+Markus Linnala,
+Dave Love,
+Mike McEwan,
+Tonny Madsen,
+Shlomo Mahlab,
+Nat Makarevitch,
+Istvan Marko,
+David Martin,
+Jason R. Mastaler,
+Gordon Matzigkeit,
+Timo Metzemakers,
+Richard Mlynarik,
+Lantz Moore,
+Morioka Tomohiko, @c Morioka
+Erik Toubro Nielsen,
+Hrvoje Niksic,
+Andy Norman,
+Fred Oberhauser,
+C. R. Oldham,
+Alexandre Oliva,
+Ken Olstad,
+Masaharu Onishi, @c Onishi
+Hideki Ono, @c Ono
+Ettore Perazzoli,
+William Perry,
+Stephen Peters,
+Jens-Ulrik Holger Petersen,
+Ulrich Pfeifer,
+Matt Pharr,
+Andy Piper,
+John McClary Prevost,
+Bill Pringlemeir,
+Mike Pullen,
+Jim Radford,
+Colin Rafferty,
+Lasse Rasinen,
+Lars Balker Rasmussen,
+Joe Reiss,
+Renaud Rioboo,
+Roland B. Roberts,
+Bart Robinson,
+Christian von Roques,
+Markus Rost,
+Jason Rumney,
+Wolfgang Rupprecht,
+Jay Sachs,
+Dewey M. Sasser,
+Conrad Sauerwald,
+Loren Schall,
+Dan Schmidt,
+Ralph Schleicher,
+Philippe Schnoebelen,
+Andreas Schwab,
+Randal L. Schwartz,
+Danny Siu,
+Matt Simmons,
+Paul D. Smith,
+Jeff Sparkes,
+Toby Speight,
+Michael Sperber,
+Darren Stalder,
+Richard Stallman,
+Greg Stark,
+Sam Steingold,
+Paul Stevenson,
+Jonas Steverud,
+Paul Stodghill,
+Kiyokazu Suto, @c Suto
+Kurt Swanson,
+Samuel Tardieu,
+Teddy,
+Chuck Thompson,
+Tozawa Akihiko, @c Tozawa
+Philippe Troin,
+James Troup,
+Trung Tran-Duc,
+Jack Twilley,
+Aaron M. Ucko,
+Aki Vehtari,
+Didier Verna,
+Vladimir Volovich,
+Jan Vroonhof,
+Stefan Waldherr,
+Pete Ware,
+Barry A. Warsaw,
+Christoph Wedler,
+Joe Wells,
+Lee Willis,
+Katsumi Yamaoka @c Yamaoka
+and
+Lloyd Zusman.
+
+
+For a full overview of what each person has done, the ChangeLogs
+included in the Gnus alpha distributions should give ample reading
+(550kB and counting).
+
+Apologies to everybody that I've forgotten, of which there are many, I'm
+sure.
+
+Gee, that's quite a list of people. I guess that must mean that there
+actually are people who are using Gnus. Who'd'a thunk it!
+
+
+@node New Features
+@subsection New Features
+@cindex new features
+
+@menu
+* ding Gnus:: New things in Gnus 5.0/5.1, the first new Gnus.
+* September Gnus:: The Thing Formally Known As Gnus 5.2/5.3.
+* Red Gnus:: Third time best---Gnus 5.4/5.5.
+* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
+* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
+@end menu
+
+These lists are, of course, just @emph{short} overviews of the
+@emph{most} important new features. No, really. There are tons more.
+Yes, we have feeping creaturism in full effect.
+
+@node ding Gnus
+@subsubsection (ding) Gnus
+
+New features in Gnus 5.0/5.1:
+
+@itemize @bullet
+
@item
- remove the "*" mark at once when unticking an article.
+The look of all buffers can be changed by setting format-like variables
+(@pxref{Group Buffer Format} and @pxref{Summary Buffer Format}).
+
@item
- `M-s' should highlight the matching text.
+Local spool and several @sc{nntp} servers can be used at once
+(@pxref{Select Methods}).
+
@item
- when checking for duplicated mails, use Resent-Message-ID if present.
+You can combine groups into virtual groups (@pxref{Virtual Groups}).
+
@item
- killing and yanking groups in topics should be better. If killing one copy
-of a group that exists in multiple topics, only that copy should
-be removed. Yanking should insert the copy, and yanking topics
-should be possible to be interspersed with the other yankings.
+You can read a number of different mail formats (@pxref{Getting Mail}).
+All the mail back ends implement a convenient mail expiry scheme
+(@pxref{Expiring Mail}).
+
@item
- command for enter a group just to read the cached articles. A way to say
-"ignore the nntp connection; just read from the cache."
+Gnus can use various strategies for gathering threads that have lost
+their roots (thereby gathering loose sub-threads into one thread) or it
+can go back and retrieve enough headers to build a complete thread
+(@pxref{Customizing Threading}).
+
@item
- `X u' should decode base64 articles.
+Killed groups can be displayed in the group buffer, and you can read
+them as well (@pxref{Listing Groups}).
+
@item
- a way to hide all "inner" cited text, leaving just the most
-recently cited text.
+Gnus can do partial group updates---you do not have to retrieve the
+entire active file just to check for new articles in a few groups
+(@pxref{The Active File}).
+
@item
- nnvirtual should be asynchronous.
+Gnus implements a sliding scale of subscribedness to groups
+(@pxref{Group Levels}).
+
@item
- after editing an article, gnus-original-article-buffer should
-be invalidated.
+You can score articles according to any number of criteria
+(@pxref{Scoring}). You can even get Gnus to find out how to score
+articles for you (@pxref{Adaptive Scoring}).
+
@item
- there should probably be a way to make Gnus not connect to the
-server and just read the articles in the server
+Gnus maintains a dribble buffer that is auto-saved the normal Emacs
+manner, so it should be difficult to lose much data on what you have
+read if your machine should go down (@pxref{Auto Save}).
+
@item
- allow a `set-default' (or something) to change the default
-value of nnoo variables.
+Gnus now has its own startup file (@file{.gnus.el}) to avoid cluttering up
+the @file{.emacs} file.
+
@item
- a command to import group infos from a .newsrc.eld file.
+You can set the process mark on both groups and articles and perform
+operations on all the marked items (@pxref{Process/Prefix}).
+
@item
- groups from secondary servers have the entire select method
-listed in each group info.
+You can grep through a subset of groups and create a group from the
+results (@pxref{Kibozed Groups}).
+
@item
- a command for just switching from the summary buffer to the group
-buffer.
+You can list subsets of groups according to, well, anything
+(@pxref{Listing Groups}).
+
@item
- a way to specify that some incoming mail washing functions
-should only be applied to some groups.
+You can browse foreign servers and subscribe to groups from those
+servers (@pxref{Browse Foreign Server}).
+
@item
- Message `C-f C-t' should ask the user whether to heed
-mail-copies-to: never.
+Gnus can fetch articles, asynchronously, on a second connection to the
+server (@pxref{Asynchronous Fetching}).
+
@item
- new group parameter -- `post-to-server' that says to post
-using the current server. Also a variable to do the same.
+You can cache articles locally (@pxref{Article Caching}).
+
@item
- the slave dribble files should auto-save to the slave file names.
+The uudecode functions have been expanded and generalized
+(@pxref{Decoding Articles}).
+
@item
- a group parameter that says what articles to display on group entry, based
-on article marks.
+You can still post uuencoded articles, which was a little-known feature
+of @sc{gnus}' past (@pxref{Uuencoding and Posting}).
+
@item
- a way to visually distinguish slave Gnusae from masters. (Whip instead
-of normal logo?)
+Fetching parents (and other articles) now actually works without
+glitches (@pxref{Finding the Parent}).
+
@item
- Use DJ Bernstein "From " quoting/dequoting, where applicable.
+Gnus can fetch FAQs and group descriptions (@pxref{Group Information}).
+
@item
- Why is hide-citation-maybe and hide-citation different? Also
-clear up info.
+Digests (and other files) can be used as the basis for groups
+(@pxref{Document Groups}).
+
@item
- group user-defined meta-parameters.
+Articles can be highlighted and customized (@pxref{Customizing
+Articles}).
+@item
+URLs and other external references can be buttonized (@pxref{Article
+Buttons}).
+@item
+You can do lots of strange stuff with the Gnus window & frame
+configuration (@pxref{Window Layout}).
-From: John Griffith <griffith@@sfs.nphil.uni-tuebingen.de>
@item
- I like the option for trying to retrieve the FAQ for a group and I was
-thinking it would be great if for those newsgroups that had archives
-you could also try to read the archive for that group. Part of the
-problem is that archives are spread all over the net, unlike FAQs.
-What would be best I suppose is to find the one closest to your site.
+You can click on buttons instead of using the keyboard
+(@pxref{Buttons}).
-In any case, there is a list of general news group archives at @*
-ftp://ftp.neosoft.com/pub/users/claird/news.lists/newsgroup_archives.html
+@end itemize
+@node September Gnus
+@subsubsection September Gnus
+@iftex
+@iflatex
+\gnusfig{-28cm}{0cm}{\epsfig{figure=ps/september,height=20cm}}
+@end iflatex
+@end iftex
-@item
-@example
-From: Jason L Tibbitts III <tibbs@@hpc.uh.edu>
-(add-hook 'gnus-select-group-hook
- (lambda ()
- (gnus-group-add-parameter group
- (cons 'gnus-group-date-last-entered (list (current-time-string))))))
+New features in Gnus 5.2/5.3:
-(defun gnus-user-format-function-d (headers)
- "Return the date the group was last read."
- (cond ((car (gnus-group-get-parameter gnus-tmp-group 'gnus-group-date-last-entered)))
- (t "")))
-@end example
+@itemize @bullet
@item
- tanken var at når du bruker `gnus-startup-file' som prefix (FOO) til å lete
-opp en fil FOO-SERVER, FOO-SERVER.el, FOO-SERVER.eld, kan du la den være en
-liste hvor du bruker hvert element i listen som FOO, istedet. da kunne man
-hatt forskjellige serveres startup-filer forskjellige steder.
-
+A new message composition mode is used. All old customization variables
+for @code{mail-mode}, @code{rnews-reply-mode} and @code{gnus-msg} are
+now obsolete.
@item
-LMI> Well, nnbabyl could alter the group info to heed labels like
-LMI> answered and read, I guess.
+Gnus is now able to generate @dfn{sparse} threads---threads where
+missing articles are represented by empty nodes (@pxref{Customizing
+Threading}).
-It could also keep them updated (the same for the Status: header of
-unix mbox files).
+@lisp
+(setq gnus-build-sparse-threads 'some)
+@end lisp
-They could be used like this:
+@item
+Outgoing articles are stored on a special archive server
+(@pxref{Archived Messages}).
+@item
+Partial thread regeneration now happens when articles are
+referred.
-@example
-`M l <name> RET' add label <name> to current message.
-`M u <name> RET' remove label <name> from current message.
-`/ l <expr> RET' limit summary buffer according to <expr>.
+@item
+Gnus can make use of GroupLens predictions (@pxref{GroupLens}).
-<expr> would be a boolean expression on the labels, e.g.
+@item
+Picons (personal icons) can be displayed under XEmacs (@pxref{Picons}).
-`/ l bug & !fixed RET'
-@end example
+@item
+A @code{trn}-like tree buffer can be displayed (@pxref{Tree Display}).
-would show all the messages which are labeled `bug' but not labeled
-`fixed'.
+@lisp
+(setq gnus-use-trees t)
+@end lisp
-One could also imagine the labels being used for highlighting, or
-affect the summary line format.
+@item
+An @code{nn}-like pick-and-read minor mode is available for the summary
+buffers (@pxref{Pick and Read}).
+@lisp
+(add-hook 'gnus-summary-mode-hook 'gnus-pick-mode)
+@end lisp
@item
-Sender: abraham@@dina.kvl.dk
+In binary groups you can use a special binary minor mode (@pxref{Binary
+Groups}).
-I'd like a gnus-find-file which work like find file, except that it
-would recognize things that looks like messages or folders:
+@item
+Groups can be grouped in a folding topic hierarchy (@pxref{Group
+Topics}).
-- If it is a directory containing numbered files, create an nndir
-summary buffer.
+@lisp
+(add-hook 'gnus-group-mode-hook 'gnus-topic-mode)
+@end lisp
-- For other directories, create a nneething summary buffer.
+@item
+Gnus can re-send and bounce mail (@pxref{Summary Mail Commands}).
-- For files matching "\\`From ", create a nndoc/mbox summary.
+@item
+Groups can now have a score, and bubbling based on entry frequency
+is possible (@pxref{Group Score}).
-- For files matching "\\`BABYL OPTIONS:", create a nndoc/baby summary.
+@lisp
+(add-hook 'gnus-summary-exit-hook 'gnus-summary-bubble-group)
+@end lisp
-- For files matching "\\`[^ \t\n]+:", create an *Article* buffer.
+@item
+Groups can be process-marked, and commands can be performed on
+groups of groups (@pxref{Marking Groups}).
-- For other files, just find them normally.
+@item
+Caching is possible in virtual groups.
-I'd like `nneething' to use this function, so it would work on a
-directory potentially containing mboxes or babyl files.
+@item
+@code{nndoc} now understands all kinds of digests, mail boxes, rnews
+news batches, ClariNet briefs collections, and just about everything
+else (@pxref{Document Groups}).
@item
-Please send a mail to bwarsaw@@cnri.reston.va.us (Barry A. Warsaw) and
-tell him what you are doing.
+Gnus has a new back end (@code{nnsoup}) to create/read SOUP packets
+(@pxref{SOUP}).
@item
-Currently, I get prompted:
+The Gnus cache is much faster.
-decend into sci?
-- type y
-decend into sci.something ?
-- type n
-decend into ucd?
+@item
+Groups can be sorted according to many criteria (@pxref{Sorting
+Groups}).
-The problem above is that since there is really only one subsection of
-science, shouldn't it prompt you for only descending sci.something? If
-there was a sci.somethingelse group or section, then it should prompt
-for sci? first the sci.something? then sci.somethingelse?...
+@item
+New group parameters have been introduced to set list-addresses and
+expiry times (@pxref{Group Parameters}).
@item
-Ja, det burde være en måte å si slikt. Kanskje en ny variabel?
-`gnus-use-few-score-files'? Så kunne score-regler legges til den
-"mest" lokale score-fila. F. eks. ville no-gruppene betjenes av
-"no.all.SCORE", osv.
+All formatting specs allow specifying faces to be used
+(@pxref{Formatting Fonts}).
@item
-What i want is for Gnus to treat any sequence or combination of the following
-as a single spoiler warning and hide it all, replacing it with a "Next Page"
-button:
+There are several more commands for setting/removing/acting on process
+marked articles on the @kbd{M P} submap (@pxref{Setting Process Marks}).
+@item
+The summary buffer can be limited to show parts of the available
+articles based on a wide range of criteria. These commands have been
+bound to keys on the @kbd{/} submap (@pxref{Limiting}).
-^L's
+@item
+Articles can be made persistent with the @kbd{*} command
+(@pxref{Persistent Articles}).
-more than n blank lines
+@item
+All functions for hiding article elements are now toggles.
-more than m identical lines
-(which should be replaced with button to show them)
+@item
+Article headers can be buttonized (@pxref{Article Washing}).
-any whitespace surrounding any of the above
+@item
+All mail back ends support fetching articles by @code{Message-ID}.
+@item
+Duplicate mail can now be treated properly (@pxref{Duplicates}).
@item
-Well, we could allow a new value to `gnus-thread-ignore-subject' --
-`spaces', or something. (We could even default to that.) And then
-subjects that differ in white space only could be considered the
-"same" subject for threading purposes.
+All summary mode commands are available directly from the article
+buffer (@pxref{Article Keymap}).
@item
-Modes to preprocess the contents (e.g. jka-compr) use the second form
-"(REGEXP FUNCTION NON-NIL)" while ordinary modes (e.g. tex) use the first
-form "(REGEXP . FUNCTION)", so you could use it to distinguish between
-those two types of modes. (auto-modes-alist, insert-file-contents-literally.)
+Frames can be part of @code{gnus-buffer-configuration} (@pxref{Window
+Layout}).
@item
- Under XEmacs -- do funny article marks:
-tick - thumb tack
-killed - skull
-soup - bowl of soup
-score below - dim light bulb
-score over - bright light bulb
+Mail can be re-scanned by a daemonic process (@pxref{Daemons}).
+@iftex
+@iflatex
+\marginpar[\mbox{}\hfill\epsfig{figure=ps/fseptember,height=5cm}]{\epsfig{figure=ps/fseptember,height=5cm}}
+@end iflatex
+@end iftex
@item
-Yes. I think the algorithm is as follows:
+Gnus can make use of NoCeM files to weed out spam (@pxref{NoCeM}).
-@example
-Group-mode
-
- show-list-of-articles-in-group
- if (key-pressed == SPACE)
- if (no-more-articles-in-group-to-select)
- if (articles-selected)
- start-reading-selected-articles;
- junk-unread-articles;
- next-group;
- else
- show-next-page;
-
- else if (key-pressed = '.')
- if (consolidated-menus) # same as hide-thread in Gnus
- select-thread-under-cursor;
- else
- select-article-under-cursor;
-
-
-Article-mode
- if (key-pressed == SPACE)
- if (more-pages-in-article)
- next-page;
- else if (more-selected-articles-to-read)
- next-article;
- else
- next-group;
-@end example
+@lisp
+(setq gnus-use-nocem t)
+@end lisp
@item
-My precise need here would have been to limit files to Incoming*.
-One could think of some `nneething-only-files' variable, but I guess
-it would have been unacceptable if one was using many unrelated such
-nneething groups.
+Groups can be made permanently visible (@pxref{Listing Groups}).
-A more useful approach would be to, in response to the `G D' prompt, be
-allowed to say something like: `~/.mail/Incoming*', somewhat limiting
-the top-level directory only (in case directories would be matched by
-the wildcard expression).
+@lisp
+(setq gnus-permanently-visible-groups "^nnml:")
+@end lisp
@item
-It would be nice if it also handled
-
- <URL:news://sunsite.auc.dk/>
-
-which should correspond to `B nntp RET sunsite.auc.dk' in *Group*.
-
+Many new hooks have been introduced to make customizing easier.
@item
+Gnus respects the @code{Mail-Copies-To} header.
- Take a look at w3-menu.el in the Emacs-W3 distribution - this works out
-really well. Each menu is 'named' by a symbol that would be on a
-gnus-*-menus (where * would be whatever, but at least group, summary, and
-article versions) variable.
+@item
+Threads can be gathered by looking at the @code{References} header
+(@pxref{Customizing Threading}).
- So for gnus-summary-menus, I would set to '(sort mark dispose ...)
+@lisp
+(setq gnus-summary-thread-gathering-function
+ 'gnus-gather-threads-by-references)
+@end lisp
- A value of '1' would just put _all_ the menus in a single 'GNUS' menu in
-the main menubar. This approach works really well for Emacs-W3 and VM.
+@item
+Read articles can be stored in a special backlog buffer to avoid
+refetching (@pxref{Article Backlog}).
+@lisp
+(setq gnus-keep-backlog 50)
+@end lisp
@item
- nndoc should take care to create unique Message-IDs for all its
-articles.
-@item
- gnus-score-followup-article only works when you have a summary buffer
-active. Make it work when posting from the group buffer as well.
-(message-sent-hook).
+A clean copy of the current article is always stored in a separate
+buffer to allow easier treatment.
+
@item
- rewrite gnus-demon to use run-with-idle-timers.
+Gnus can suggest where to save articles (@pxref{Saving Articles}).
@item
- * Enhancements to Gnus:
+Gnus doesn't have to do as much prompting when saving (@pxref{Saving
+Articles}).
- Add two commands:
+@lisp
+(setq gnus-prompt-before-saving t)
+@end lisp
- * gnus-servers (gnus-start-server-buffer?)--enters Gnus and goes
- straight to the server buffer, without opening any connections to
- servers first.
+@item
+@code{gnus-uu} can view decoded files asynchronously while fetching
+articles (@pxref{Other Decode Variables}).
- * gnus-server-read-server-newsrc--produces a buffer very similar to
- the group buffer, but with only groups from that server listed;
- quitting this buffer returns to the server buffer.
+@lisp
+(setq gnus-uu-grabbed-file-functions 'gnus-uu-grab-view)
+@end lisp
@item
- add a command to check the integrity of an nnfolder folder --
-go through the article numbers and see that there are no duplicates,
-and stuff.
+Filling in the article buffer now works properly on cited text
+(@pxref{Article Washing}).
@item
- `unsmileyfy-buffer' to undo smileification.
+Hiding cited text adds buttons to toggle hiding, and how much
+cited text to hide is now customizable (@pxref{Article Hiding}).
-@item
- a command to give all relevant info on an article, including all
-secondary marks.
+@lisp
+(setq gnus-cited-lines-visible 2)
+@end lisp
@item
- when doing `-request-accept-article', the backends should do
-the nnmail duplicate checking.
+Boring headers can be hidden (@pxref{Article Hiding}).
@item
- allow `message-signature-file' to be a function to return the
-value of the signature file.
+Default scoring values can now be set from the menu bar.
@item
- In addition, I would love it if I could configure message-tab so that it
-could call `bbdb-complete-name' in other headers. So, some sort of
-interface like
+Further syntax checking of outgoing articles have been added.
-(setq message-tab-alist
- '((message-header-regexp message-expand-group)
- ("^\\(To\\|[cC]c\\|[bB]cc\\)" bbdb-complete-name)))
+@end itemize
-then you could run the relevant function to complete the information in
-the header
-@item
- cache the newsgroups file locally to avoid reloading it all the time.
+@node Red Gnus
+@subsubsection Red Gnus
-@item
- a command to import a buffer into a group.
+New features in Gnus 5.4/5.5:
-@item
- nnweb should allow fetching by Message-ID from servers.
+@iftex
+@iflatex
+\gnusfig{-5.5cm}{-4cm}{\epsfig{figure=ps/red,height=20cm}}
+@end iflatex
+@end iftex
-@item
- point in the article buffer doesn't always go to the
-beginning of the buffer when selecting new articles.
+@itemize @bullet
@item
- a command to process mark all unread articles.
+@file{nntp.el} has been totally rewritten in an asynchronous fashion.
@item
- `gnus-gather-threads-by-references-and-subject' -- first
-do gathering by references, and then go through the dummy roots and
-do more gathering by subject.
+Article prefetching functionality has been moved up into
+Gnus (@pxref{Asynchronous Fetching}).
@item
- gnus-uu-mark-in-numerical-order -- process mark articles in
-article numerical order.
+Scoring can now be performed with logical operators like @code{and},
+@code{or}, @code{not}, and parent redirection (@pxref{Advanced
+Scoring}).
@item
- (gnus-thread-total-score
- (gnus-id-to-thread (mail-header-id (gnus-summary-article-header))))
-bind to a key.
+Article washing status can be displayed in the
+article mode line (@pxref{Misc Article}).
@item
- sorting by score is wrong when using sparse threads.
+@file{gnus.el} has been split into many smaller files.
@item
- a command to fetch an arbitrary article -- without having to be
-in the summary buffer.
+Suppression of duplicate articles based on Message-ID can be done
+(@pxref{Duplicate Suppression}).
-@item
- a new nncvs backend. Each group would show an article, using
-version branches as threading, checkin date as the date, etc.
+@lisp
+(setq gnus-suppress-duplicates t)
+@end lisp
@item
- http://www.dejanews.com/forms/dnsetfilter_exp.html ?
-This filter allows one to construct advance queries on the Dejanews
-database such as specifying start and end dates, subject, author,
-and/or newsgroup name.
+New variables for specifying what score and adapt files are to be
+considered home score and adapt files (@pxref{Home Score File}) have
+been added.
@item
- new Date header scoring type -- older, newer
+@code{nndoc} was rewritten to be easily extendable (@pxref{Document
+Server Internals}).
@item
- use the summary toolbar in the article buffer.
+Groups can inherit group parameters from parent topics (@pxref{Topic
+Parameters}).
@item
- a command to fetch all articles that are less than X days old.
+Article editing has been revamped and is now actually usable.
@item
- in pick mode, `q' should save the list of selected articles in the
-group info. The next time the group is selected, these articles
-will automatically get the process mark.
+Signatures can be recognized in more intelligent fashions
+(@pxref{Article Signature}).
@item
- Isn't it possible to (also?) allow M-^ to automatically try the
-default server if it fails on the current server? (controlled by a
-user variable, (nil, t, 'ask)).
+Summary pick mode has been made to look more @code{nn}-like. Line
+numbers are displayed and the @kbd{.} command can be used to pick
+articles (@code{Pick and Read}).
@item
- make it possible to cancel articles using the select method for the
-current group.
+Commands for moving the @file{.newsrc.eld} from one server to
+another have been added (@pxref{Changing Servers}).
@item
- `gnus-summary-select-article-on-entry' or something. It'll default
-to t and will select whatever article decided by `gnus-auto-select-first'.
+There's a way now to specify that ``uninteresting'' fields be suppressed
+when generating lines in buffers (@pxref{Advanced Formatting}).
@item
- a new variable to control which selection commands should be unselecting.
-`first', `best', `next', `prev', `next-unread', `prev-unread' are
-candidates.
+Several commands in the group buffer can be undone with @kbd{C-M-_}
+(@pxref{Undo}).
@item
- be able to select groups that have no articles in them
-to be able to post in them (using the current select method).
+Scoring can be done on words using the new score type @code{w}
+(@pxref{Score File Format}).
@item
- be able to post via DejaNews.
+Adaptive scoring can be done on a Subject word-by-word basis
+(@pxref{Adaptive Scoring}).
-@item
- `x' should retain any sortings that have been performed.
+@lisp
+(setq gnus-use-adaptive-scoring '(word))
+@end lisp
@item
- allow the user to specify the precedence of the secondary marks. Also
-allow them to be displayed separately.
+Scores can be decayed (@pxref{Score Decays}).
-@item
- gnus-summary-save-in-pipe should concatenate the results from
-the processes when doing a process marked pipe.
+@lisp
+(setq gnus-decay-scores t)
+@end lisp
@item
- a new match type, like Followup, but which adds Thread matches on all
-articles that match a certain From header.
+Scoring can be performed using a regexp on the Date header. The Date is
+normalized to compact ISO 8601 format first (@pxref{Score File Format}).
@item
- a function that can be read from kill-emacs-query-functions to offer
-saving living summary buffers.
+A new command has been added to remove all data on articles from
+the native server (@pxref{Changing Servers}).
@item
- a function for selecting a particular group which will contain
-the articles listed in a list of article numbers/id's.
+A new command for reading collections of documents
+(@code{nndoc} with @code{nnvirtual} on top) has been added---@kbd{C-M-d}
+(@pxref{Really Various Summary Commands}).
@item
- a battery of character translation functions to translate common
-Mac, MS (etc) characters into ISO 8859-1.
-
-@example
-(defun article-fix-m$word ()
- "Fix M$Word smartquotes in an article."
- (interactive)
- (save-excursion
- (let ((buffer-read-only nil))
- (goto-char (point-min))
- (while (search-forward "\221" nil t)
- (replace-match "`" t t))
- (goto-char (point-min))
- (while (search-forward "\222" nil t)
- (replace-match "'" t t))
- (goto-char (point-min))
- (while (search-forward "\223" nil t)
- (replace-match "\"" t t))
- (goto-char (point-min))
- (while (search-forward "\224" nil t)
- (replace-match "\"" t t)))))
-@end example
+Process mark sets can be pushed and popped (@pxref{Setting Process
+Marks}).
@item
-@example
- (add-hook 'gnus-exit-query-functions
-'(lambda ()
- (if (and (file-exists-p nnmail-spool-file)
- (> (nnheader-file-size nnmail-spool-file) 0))
- (yes-or-no-p "New mail has arrived. Quit Gnus anyways? ")
- (y-or-n-p "Are you sure you want to quit Gnus? "))))
-@end example
+A new mail-to-news back end makes it possible to post even when the @sc{nntp}
+server doesn't allow posting (@pxref{Mail-To-News Gateways}).
@item
- allow message-default-headers to be a function.
+A new back end for reading searches from Web search engines
+(@dfn{DejaNews}, @dfn{Alta Vista}, @dfn{InReference}) has been added
+(@pxref{Web Searches}).
@item
- new Date score match types -- < > = (etc) that take floating point
-numbers and match on the age of the article.
+Groups inside topics can now be sorted using the standard sorting
+functions, and each topic can be sorted independently (@pxref{Topic
+Sorting}).
@item
-@example
-> > > If so, I've got one gripe: It seems that when I fire up gnus 5.2.25
-> > > under xemacs-19.14, it's creating a new frame, but is erasing the
-> > > buffer in the frame that it was called from =:-O
->
-> > Hm. How do you start up Gnus? From the toolbar or with
-> > `M-x gnus-other-frame'?
->
-> I normally start it up from the toolbar; at
-> least that's the way I've caught it doing the
-> deed before.
-@end example
+Subsets of the groups can be sorted independently (@code{Sorting
+Groups}).
@item
- all commands that react to the process mark should push
-the current process mark set onto the stack.
+Cached articles can be pulled into the groups (@pxref{Summary Generation
+Commands}).
+@iftex
+@iflatex
+\marginpar[\mbox{}\hfill\epsfig{figure=ps/fred,width=3cm}]{\epsfig{figure=ps/fred,width=3cm}}
+@end iflatex
+@end iftex
@item
- gnus-article-hide-pgp
-Selv ville jeg nok ha valgt å slette den dersom teksten matcher
-@example
-"\\(This\s+\\)?[^ ]+ has been automatically signed by"
-@end example
-og det er maks hundre tegn mellom match-end og ----linja. Men -det-
-er min type heuristikk og langt fra alles.
+Score files are now applied in a more reliable order (@pxref{Score
+Variables}).
@item
- `gnus-subscribe-sorted' -- insert new groups where they would have been
-sorted to if `gnus-group-sort-function' were run.
+Reports on where mail messages end up can be generated (@pxref{Splitting
+Mail}).
@item
- gnus-(group,summary)-highlight should respect any `face' text props set
-on the lines.
+More hooks and functions have been added to remove junk from incoming
+mail before saving the mail (@pxref{Washing Mail}).
@item
- use run-with-idle-timer for gnus-demon instead of the
-home-brewed stuff for better reliability.
+Emphasized text can be properly fontisized:
-@item
- add a way to select which NoCeM type to apply -- spam, troll, etc.
+@end itemize
-@item
- nndraft-request-group should tally auto-save files.
-@item
- implement nntp-retry-on-break and nntp-command-timeout.
+@node Quassia Gnus
+@subsubsection Quassia Gnus
-@item
- gnus-article-highlight-limit that says when not to highlight (long)
-articles.
+New features in Gnus 5.6:
-@item
- (nnoo-set SERVER VARIABLE VALUE)
+@itemize @bullet
@item
- nn*-spool-methods
+New functionality for using Gnus as an offline newsreader has been
+added. A plethora of new commands and modes have been added. See
+@pxref{Gnus Unplugged} for the full story.
@item
- interrupitng agent fetching of articles should save articles.
+ The @code{nndraft} back end has returned, but works differently than
+before. All Message buffers are now also articles in the @code{nndraft}
+group, which is created automatically.
@item
- command to open a digest group, and copy all the articles there to the
-current group.
+@code{gnus-alter-header-function} can now be used to alter header
+values.
@item
- a variable to disable article body highlights if there's more than
-X characters in the body.
+ @code{gnus-summary-goto-article} now accept Message-ID's.
@item
- handle 480/381 authinfo requests separately.
+ A new Message command for deleting text in the body of a message
+outside the region: @kbd{C-c C-v}.
@item
- include the texi/dir file in the distribution.
+ You can now post to component group in @code{nnvirtual} groups with
+@kbd{C-u C-c C-c}.
@item
- format spec to "tab" to a position.
+ @code{nntp-rlogin-program}---new variable to ease customization.
@item
- Move all prompting to the new `M-n' default style.
+ @code{C-u C-c C-c} in @code{gnus-article-edit-mode} will now inhibit
+re-highlighting of the article buffer.
@item
- command to display all dormant articles.
+ New element in @code{gnus-boring-article-headers}---@code{long-to}.
@item
- gnus-auto-select-next makeover -- list of things it should do.
+ @kbd{M-i} symbolic prefix command. See the section "Symbolic
+Prefixes" in the Gnus manual for details.
@item
- a score match type that adds scores matching on From if From has replied
-to something someone else has said.
+ @kbd{L} and @kbd{I} in the summary buffer now take the symbolic prefix
+@kbd{a} to add the score rule to the "all.SCORE" file.
@item
- Read Netscape discussion groups:
-snews://secnews.netscape.com/netscape.communicator.unix
+ @code{gnus-simplify-subject-functions} variable to allow greater
+control over simplification.
@item
-One command to edit the original version if an article, and one to edit
-the displayed version.
+ @kbd{A T}---new command for fetching the current thread.
@item
-@kbd{T v} -- make all process-marked articles the children of the
-current article.
+ @kbd{/ T}---new command for including the current thread in the
+limit.
@item
-Switch from initial text to the new default text mechanism.
+ @kbd{M-RET} is a new Message command for breaking cited text.
@item
-How about making it possible to expire local articles? Will it be
-possible to make various constraints on when an article can be
-expired, e.g. (read), (age > 14 days), or the more interesting (read
-& age > 14 days)?
+ @samp{\\1}-expressions are now valid in @code{nnmail-split-methods}.
@item
-New limit command---limit to articles that have a certain string
-in the head or body.
+ The @code{custom-face-lookup} function has been removed.
+If you used this function in your initialization files, you must
+rewrite them to use @code{face-spec-set} instead.
@item
-Allow breaking lengthy NNTP commands.
+ Canceling now uses the current select method. Symbolic prefix
+@kbd{a} forces normal posting method.
@item
-gnus-article-highlight-limit, to disable highlighting in big articles.
+ New command to translate M******** sm*rtq**t*s into proper
+text---@kbd{W d}.
@item
-Editing an article should put the article to be edited
-in a special, unique buffer.
+ For easier debugging of @code{nntp}, you can set
+@code{nntp-record-commands} to a non-@code{nil} value.
@item
-A command to send a mail to the admin-address group param.
+ @code{nntp} now uses @file{~/.authinfo}, a @file{.netrc}-like file, for
+controlling where and how to send @sc{authinfo} to @sc{nntp} servers.
@item
-A Date scoring type that will match if the article
-is less than a certain number of days old.
+ A command for editing group parameters from the summary buffer
+has been added.
@item
-New spec: %~(tab 56) to put point on column 56
+ A history of where mails have been split is available.
@item
-Allow Gnus Agent scoring to use normal score files.
+ A new article date command has been added---@code{article-date-iso8601}.
@item
-Rething the Agent active file thing. `M-g' doesn't update the active
-file, for instance.
+ Subjects can be simplified when threading by setting
+@code{gnus-score-thread-simplify}.
@item
-With dummy roots, `^' and then selecing the first article
-in any other dummy thread will make Gnus highlight the
-dummy root instead of the first article.
+ A new function for citing in Message has been
+added---@code{message-cite-original-without-signature}.
@item
-Propagate all group properties (marks, article numbers, etc) up to the
-topics for displaying.
+ @code{article-strip-all-blank-lines}---new article command.
@item
-`n' in the group buffer with topics should go to the next group
-with unread articles, even if that group is hidden in a topic.
+ A new Message command to kill to the end of the article has
+been added.
@item
-gnus-posting-styles doesn't work in drafts.
+ A minimum adaptive score can be specified by using the
+@code{gnus-adaptive-word-minimum} variable.
@item
-gnus-summary-limit-include-cached is slow when there are
-many articles in the cache, since it regenerates big parts of the
-summary buffer for each article.
+ The "lapsed date" article header can be kept continually
+updated by the @code{gnus-start-date-timer} command.
@item
-Implement gnus-batch-brew-soup.
+ Web listserv archives can be read with the @code{nnlistserv} back end.
@item
-Group parameters and summary commands for un/subscribing to mailing
-lists.
+ Old dejanews archives can now be read by @code{nnweb}.
-@item
-Introduce nnmail-home-directory.
+@end itemize
-@item
-gnus-fetch-group and friends should exit Gnus when the user
-exits the group.
+@node Pterodactyl Gnus
+@subsubsection Pterodactyl Gnus
-@item
-The jingle is only played on the second invocation of Gnus.
+New features in Gnus 5.8:
-@item
-Bouncing articles should do MIME.
+@itemize @bullet
@item
-Crossposted articles should "inherit" the % or @ mark from the other
-groups it has been crossposted to, or something. (Agent.)
+The mail-fetching functions have changed. See the manual for the
+many details. In particular, all procmail fetching variables are gone.
-@item
-`S D r' should allow expansion of aliases.
+If you used procmail like in
-@item
-If point is on a group that appears multiple times in topics, and
-you press `l', point will move to the first instance of the group.
+@lisp
+(setq nnmail-use-procmail t)
+(setq nnmail-spool-file 'procmail)
+(setq nnmail-procmail-directory "~/mail/incoming/")
+(setq nnmail-procmail-suffix "\\.in")
+@end lisp
-@item
-Fetch by Message-ID from dejanews.
+this now has changed to
+
+@lisp
+(setq mail-sources
+ '((directory :path "~/mail/incoming/"
+ :suffix ".in")))
+@end lisp
-<URL:http://search.dejanews.com/msgid.xp?MID=%3C62h9l9$hm4@@basement.replay.com%3E&fmt=raw>
+More information is available in the info doc at Select Methods ->
+Getting Mail -> Mail Sources
@item
-A spec for the group line format to display the number of
-agent-downloaded articles in the group.
+Gnus is now a @sc{mime}-capable reader. This affects many parts of
+Gnus, and adds a slew of new commands. See the manual for details.
@item
-Some nntp servers never respond when posting, so there should be a
-timeout for all commands.
+Gnus has also been multilingualized. This also affects too
+many parts of Gnus to summarize here, and adds many new variables.
@item
-When stading on a topic line and `t'-ing, point goes to the last line.
-It should go somewhere else.
+@code{gnus-auto-select-first} can now be a function to be
+called to position point.
@item
-I'm having trouble accessing a newsgroup with a "+" in its name with
-Gnus. There is a new newsgroup on msnews.microsoft.com named
-"microsoft.public.multimedia.directx.html+time" that I'm trying to
-access as
-"nntp+msnews.microsoft.com:microsoft.public.multimedia.directx.html+time"
-but it gives an error that it cant access the group.
-
-Is the "+" character illegal in newsgroup names? Is there any way in
-Gnus to work around this? (gnus 5.6.45 - XEmacs 20.4)
+The user can now decide which extra headers should be included in
+summary buffers and @sc{nov} files.
@item
+@code{gnus-article-display-hook} has been removed. Instead, a number
+of variables starting with @code{gnus-treat-} have been added.
-When `#F', do:
-
-@example
-Subject: Answer to your mails 01.01.1999-01.05.1999
- --text follows this line--
-Sorry I killfiled you...
-
-Under the subject "foo", you wrote on 01.01.1999:
-> bar
-Under the subject "foo1", you wrote on 01.01.1999:
-> bar 1
-@end example
+@item
+The Gnus posting styles have been redone again and now works in a
+subtly different manner.
@item
-Allow "orphan" scores in the Agent scoring.
+New web-based back ends have been added: @code{nnslashdot},
+@code{nnwarchive} and @code{nnultimate}. nnweb has been revamped,
+again, to keep up with ever-changing layouts.
@item
-Solve the halting problem.
+Gnus can now read @sc{imap} mail via @code{nnimap}.
-@c TODO
@end itemize
@iftex
@end iftex
+@node On Writing Manuals
+@section On Writing Manuals
+
+I guess most manuals are written after-the-fact; documenting a program
+that's already there. This is not how this manual is written. When
+implementing something, I write the manual entry for that something
+straight away. I then see that it's difficult to explain the
+functionality, so I write how it's supposed to be, and then I change the
+implementation. Writing the documentation and writing the code goes
+hand in hand.
+
+This, of course, means that this manual has no, or little, flow. It
+documents absolutely everything in Gnus, but often not where you're
+looking for it. It is a reference manual, and not a guide to how to get
+started with Gnus.
+
+That would be a totally different book, that should be written using the
+reference manual as source material. It would look quite differently.
+
+
@page
@node Terminology
@section Terminology
Post an article to the current newsgroup responding to the article you
are reading.
-@item backend
-@cindex backend
-Gnus gets fed articles from a number of backends, both news and mail
-backends. Gnus does not handle the underlying media, so to speak---this
-is all done by the backends.
+@item back end
+@cindex back end
+Gnus considers mail and news to be mostly the same, really. The only
+difference is how to access the actual articles. News articles are
+commonly fetched via the protocol NNTP, whereas mail messages could be
+read from a file on the local disk. The internal architecture of Gnus
+thus comprises a `front end' and a number of `back ends'. Internally,
+when you enter a group (by hitting @key{RET}, say), you thereby invoke
+a function in the front end in Gnus. The front end then `talks' to a
+back end and says things like ``Give me the list of articles in the foo
+group'' or ``Show me article number 4711''.
+
+So a back end mainly defines either a protocol (the @code{nntp} back end
+accesses news via NNTP, the @code{nnimap} back end accesses mail via
+IMAP) or a file format and directory layout (the @code{nnspool} back end
+accesses news via the common `spool directory' format, the @code{nnml}
+back end access mail via a file format and directory layout that's
+quite similar).
+
+Gnus does not handle the underlying media, so to speak---this is all
+done by the back ends. A back end is a collection of functions to
+access the articles.
+
+However, sometimes the term `back end' is also used where `server'
+would have been more appropriate. And then there is the term `select
+method' which can mean either. The Gnus terminology can be quite
+confusing.
@item native
@cindex native
-Gnus will always use one method (and backend) as the @dfn{native}, or
+Gnus will always use one method (and back end) as the @dfn{native}, or
default, way of getting news.
@item foreign
@cindex foreign
You can also have any number of foreign groups active at the same time.
-These are groups that use non-native non-secondary backends for getting
+These are groups that use non-native non-secondary back ends for getting
news.
@item secondary
@cindex secondary
-Secondary backends are somewhere half-way between being native and being
+Secondary back ends are somewhere half-way between being native and being
foreign, but they mostly act like they are native.
@item article
@item @sc{nov}
@cindex nov
-When Gnus enters a group, it asks the backend for the headers of all
+When Gnus enters a group, it asks the back end for the headers of all
unread articles in the group. Most servers support the News OverView
format, which is more compact and much faster to read and parse than the
normal @sc{head} format.
@item select method
@cindex select method
-A structure that specifies the backend, the server and the virtual
+A structure that specifies the back end, the server and the virtual
server settings.
@item virtual server
@item digest
@cindex digest
A collection of messages in one file. The most common digest format is
-specified by RFC1153.
+specified by RFC 1153.
@end table
for some quite common situations.
@menu
-* Slow/Expensive Connection:: You run a local Emacs and get the news elsewhere.
-* Slow Terminal Connection:: You run a remote Emacs.
-* Little Disk Space:: You feel that having large setup files is icky.
-* Slow Machine:: You feel like buying a faster machine.
+* Slow/Expensive Connection:: You run a local Emacs and get the news elsewhere.
+* Slow Terminal Connection:: You run a remote Emacs.
+* Little Disk Space:: You feel that having large setup files is icky.
+* Slow Machine:: You feel like buying a faster machine.
@end menu
@node Slow/Expensive Connection
-@subsection Slow/Expensive @sc{nntp} Connection
+@subsection Slow/Expensive NNTP Connection
If you run Emacs on a machine locally, and get your news from a machine
over some very thin strings, you want to cut down on the amount of data
If this is non-@code{nil}, all threads in the summary buffer will be
hidden initially.
+
@item gnus-updated-mode-lines
If this is @code{nil}, Gnus will not put information in the buffer mode
lines, which might save some time.
@kindex M-x gnus-bug
@findex gnus-bug
If you find a bug in Gnus, you can report it with the @kbd{M-x gnus-bug}
-command. @kbd{M-x set-variable RET debug-on-error RET t RET}, and send
+command. @kbd{M-x set-variable RET debug-on-error RET t RET}, and send
me the backtrace. I will fix bugs, but I can only fix them if you send
me a precise description as to how to reproduce the bug.
it somewhere it can be reached, and include the URL of the picture in
the bug report.
+@cindex patches
+If you would like to contribute a patch to fix bugs or make
+improvements, please produce the patch using @samp{diff -u}.
+
+@cindex edebug
+If you want to debug your problem further before reporting, possibly
+in order to solve the problem yourself and send a patch, you can use
+edebug. Debugging lisp code is documented in the Elisp manual
+(@pxref{Debugging, , Debugging Lisp Programs, elisp, The GNU Emacs
+Lisp Reference Manual}). To get you started with edebug, consider if
+you discover some weird behaviour when pressing @kbd{c}, the first
+step is to do @kbd{C-h k c} and click on the hyperlink (Emacs only) in
+the documentation buffer that leads you to the function definition,
+then press @kbd{M-x edebug-defun RET} with point inside that function,
+return to Gnus and press @kbd{c} to invoke the code. You will be
+placed in the lisp buffer and can single step using @kbd{SPC} and
+evaluate expressions using @kbd{M-:} or inspect variables using
+@kbd{C-h v}, abort execution with @kbd{q}, and resume execution with
+@kbd{c} or @kbd{g}.
+
+@cindex elp
+@cindex profile
+@cindex slow
+Sometimes, a problem do not directly generate a elisp error but
+manifests itself by causing Gnus to be very slow. In these cases, you
+can use @kbd{M-x toggle-debug-on-quit} and press C-j when things are
+slow, and then try to analyze the backtrace (repeating the procedure
+helps isolating the real problem areas). A fancier approach is to use
+the elisp profiler, ELP. The profiler is (or should be) fully
+documented elsewhere, but to get you started there are a few steps
+that need to be followed. First, instrument the part of Gnus you are
+interested in for profiling, e.g. @kbd{M-x elp-instrument-package RET
+gnus} or @kbd{M-x elp-instrument-packagre RET message}. Then perform
+the operation that is slow and press @kbd{M-x elp-results}. You will
+then see which operations that takes time, and can debug them further.
+If the entire operation takes much longer than the time spent in the
+slowest function in the profiler output, you probably profiled the
+wrong part of Gnus. To reset profiling statistics, use @kbd{M-x
+elp-reset-all}. @kbd{M-x elp-restore-all} is supposed to remove
+profiling, but given the complexities and dynamic code generation in
+Gnus, it might not always work perfectly.
+
If you just need help, you are better off asking on
@samp{gnu.emacs.gnus}. I'm not very helpful.
You can never expect the internals of a program not to change, but I
will be defining (in some details) the interface between Gnus and its
-backends (this is written in stone), the format of the score files
+back ends (this is written in stone), the format of the score files
(ditto), data structures (some are less likely to change than others)
and general methods of operation.
@menu
-* Gnus Utility Functions:: Common functions and variable to use.
-* Backend Interface:: How Gnus communicates with the servers.
-* Score File Syntax:: A BNF definition of the score file standard.
-* Headers:: How Gnus stores headers internally.
-* Ranges:: A handy format for storing mucho numbers.
-* Group Info:: The group info format.
-* Extended Interactive:: Symbolic prefixes and stuff.
-* Emacs/XEmacs Code:: Gnus can be run under all modern Emacsen.
-* Various File Formats:: Formats of files that Gnus use.
+* Gnus Utility Functions:: Common functions and variable to use.
+* Back End Interface:: How Gnus communicates with the servers.
+* Score File Syntax:: A BNF definition of the score file standard.
+* Headers:: How Gnus stores headers internally.
+* Ranges:: A handy format for storing mucho numbers.
+* Group Info:: The group info format.
+* Extended Interactive:: Symbolic prefixes and stuff.
+* Emacs/XEmacs Code:: Gnus can be run under all modern Emacsen.
+* Various File Formats:: Formats of files that Gnus use.
@end menu
@item gnus-news-group-p
@findex gnus-news-group-p
-Says whether @var{group} came from a news backend.
+Says whether @var{group} came from a news back end.
@item gnus-ephemeral-group-p
@findex gnus-ephemeral-group-p
@item gnus-check-backend-function
@findex gnus-check-backend-function
-Takes two parameters, @var{function} and @var{group}. If the backend
+Takes two parameters, @var{function} and @var{group}. If the back end
@var{group} comes from supports @var{function}, return non-@code{nil}.
@lisp
@end table
-@node Backend Interface
-@subsection Backend Interface
+@node Back End Interface
+@subsection Back End Interface
Gnus doesn't know anything about @sc{nntp}, spools, mail or virtual
groups. It only knows how to talk to @dfn{virtual servers}. A virtual
-server is a @dfn{backend} and some @dfn{backend variables}. As examples
+server is a @dfn{back end} and some @dfn{back end variables}. As examples
of the first, we have @code{nntp}, @code{nnspool} and @code{nnmbox}. As
examples of the latter we have @code{nntp-port-number} and
@code{nnmbox-directory}.
-When Gnus asks for information from a backend---say @code{nntp}---on
+When Gnus asks for information from a back end---say @code{nntp}---on
something, it will normally include a virtual server name in the
-function parameters. (If not, the backend should use the ``current''
+function parameters. (If not, the back end should use the ``current''
virtual server.) For instance, @code{nntp-request-list} takes a virtual
server as its only (optional) parameter. If this virtual server hasn't
been opened, the function should fail.
Here the virtual server name is @samp{odd-one} while the name of
the physical server is @samp{ifi.uio.no}.
-The backends should be able to switch between several virtual servers.
-The standard backends implement this by keeping an alist of virtual
+The back ends should be able to switch between several virtual servers.
+The standard back ends implement this by keeping an alist of virtual
server environments that they pull down/push up when needed.
There are two groups of interface functions: @dfn{required functions},
the function call. Functions that fail should return @code{nil} as the
return value.
-Some backends could be said to be @dfn{server-forming} backends, and
-some might be said not to be. The latter are backends that generally
+Some back ends could be said to be @dfn{server-forming} back ends, and
+some might be said not to be. The latter are back ends that generally
only operate on one group at a time, and have no concept of ``server''
-- they have a group, and they deliver info on that group and nothing
more.
-In the examples and definitions I will refer to the imaginary backend
+Gnus identifies each message by way of group name and article number. A
+few remarks about these article numbers might be useful. First of all,
+the numbers are positive integers. Secondly, it is normally not
+possible for later articles to `re-use' older article numbers without
+confusing Gnus. That is, if a group has ever contained a message
+numbered 42, then no other message may get that number, or Gnus will get
+mightily confused.@footnote{See the function
+@code{nnchoke-request-update-info}, @ref{Optional Back End Functions}.}
+Third, article numbers must be assigned in order of arrival in the
+group; this is not necessarily the same as the date of the message.
+
+The previous paragraph already mentions all the `hard' restrictions that
+article numbers must fulfill. But it seems that it might be useful to
+assign @emph{consecutive} article numbers, for Gnus gets quite confused
+if there are holes in the article numbering sequence. However, due to
+the `no-reuse' restriction, holes cannot be avoided altogether. It's
+also useful for the article numbers to start at 1 to avoid running out
+of numbers as long as possible.
+
+Note that by convention, backends are named @code{nnsomething}, but
+Gnus also comes with some @code{nnnotbackends}, such as
+@file{nnheader.el}, @file{nnmail.el} and @file{nnoo.el}.
+
+In the examples and definitions I will refer to the imaginary back end
@code{nnchoke}.
@cindex @code{nnchoke}
@menu
-* Required Backend Functions:: Functions that must be implemented.
-* Optional Backend Functions:: Functions that need not be implemented.
-* Error Messaging:: How to get messages and report errors.
-* Writing New Backends:: Extending old backends.
-* Hooking New Backends Into Gnus:: What has to be done on the Gnus end.
-* Mail-like Backends:: Some tips on mail backends.
+* Required Back End Functions:: Functions that must be implemented.
+* Optional Back End Functions:: Functions that need not be implemented.
+* Error Messaging:: How to get messages and report errors.
+* Writing New Back Ends:: Extending old back ends.
+* Hooking New Back Ends Into Gnus:: What has to be done on the Gnus end.
+* Mail-like Back Ends:: Some tips on mail back ends.
@end menu
-@node Required Backend Functions
-@subsubsection Required Backend Functions
+@node Required Back End Functions
+@subsubsection Required Back End Functions
@table @code
@item (nnchoke-retrieve-headers ARTICLES &optional GROUP SERVER FETCH-OLD)
@var{articles} is either a range of article numbers or a list of
-@code{Message-ID}s. Current backends do not fully support either---only
-sequences (lists) of article numbers, and most backends do not support
+@code{Message-ID}s. Current back ends do not fully support either---only
+sequences (lists) of article numbers, and most back ends do not support
retrieval of @code{Message-ID}s. But they should try for both.
-The result data should either be HEADs or NOV lines, and the result
+The result data should either be HEADs or @sc{nov} lines, and the result
value should either be @code{headers} or @code{nov} to reflect this.
This might later be expanded to @code{various}, which will be a mixture
-of HEADs and NOV lines, but this is currently not supported by Gnus.
+of HEADs and @sc{nov} lines, but this is currently not supported by Gnus.
If @var{fetch-old} is non-@code{nil} it says to try fetching "extra
headers", in some meaning of the word. This is generally done by
fetching (at most) @var{fetch-old} extra headers less than the smallest
article number in @code{articles}, and filling the gaps as well. The
-presence of this parameter can be ignored if the backend finds it
+presence of this parameter can be ignored if the back end finds it
cumbersome to follow the request. If this is non-@code{nil} and not a
number, do maximum fetches.
@var{server} is here the virtual server name. @var{definitions} is a
list of @code{(VARIABLE VALUE)} pairs that define this virtual server.
-If the server can't be opened, no error should be signaled. The backend
+If the server can't be opened, no error should be signaled. The back end
may then choose to refuse further attempts at connecting to this
server. In fact, it should do so.
@item (nnchoke-request-close)
-Close connection to all servers and free all resources that the backend
-have reserved. All buffers that have been created by that backend
+Close connection to all servers and free all resources that the back end
+have reserved. All buffers that have been created by that back end
should be killed. (Not the @code{nntp-server-buffer}, though.) This
function is generally only called when Gnus is shutting down.
Get data on @var{group}. This function also has the side effect of
making @var{group} the current group.
-If @var{FAST}, don't bother to return useful data, just make @var{group}
+If @var{fast}, don't bother to return useful data, just make @var{group}
the current group.
Here's an example of some result data and a definition of the same:
considering the highest and lowest article numbers, but some articles
may have been canceled. Gnus just discards the total-number, so
whether one should take the bother to generate it properly (if that is a
-problem) is left as an exercise to the reader.
+problem) is left as an exercise to the reader. If the group contains no
+articles, the lowest article number should be reported as 1 and the
+highest as 0.
@example
group-status = [ error / info ] eol
@item (nnchoke-close-group GROUP &optional SERVER)
Close @var{group} and free any resources connected to it. This will be
-a no-op on most backends.
+a no-op on most back ends.
There should be no data returned.
@end example
On each line we have a group name, then the highest article number in
-that group, the lowest article number, and finally a flag.
+that group, the lowest article number, and finally a flag. If the group
+contains no articles, the lowest article number should be reported as 1
+and the highest as 0.
@example
active-file = *active-line
@end table
-@node Optional Backend Functions
-@subsubsection Optional Backend Functions
+@node Optional Back End Functions
+@subsubsection Optional Back End Functions
@table @code
@item (nnchoke-request-update-info GROUP INFO &optional SERVER)
-A Gnus group info (@pxref{Group Info}) is handed to the backend for
-alterations. This comes in handy if the backend really carries all the
+A Gnus group info (@pxref{Group Info}) is handed to the back end for
+alterations. This comes in handy if the back end really carries all the
information (as is the case with virtual and imap groups). This
function should destructively alter the info to suit its needs, and
-should return the (altered) group info.
+should return a non-nil value.
There should be no result data from this function.
@item (nnchoke-request-set-mark GROUP ACTION &optional SERVER)
-Set/remove/add marks on articles. Normally Gnus handles the article
+Set/remove/add marks on articles. Normally Gnus handles the article
marks (such as read, ticked, expired etc) internally, and store them in
-@code{~/.newsrc.eld}. Some backends (such as IMAP) however carry all
-information about the articles on the server, so Gnus need to propagate
-the mark information to the server.
+@code{~/.newsrc.eld}. Some back ends (such as @sc{imap}) however carry
+all information about the articles on the server, so Gnus need to
+propagate the mark information to the server.
ACTION is a list of mark setting requests, having this format:
(RANGE ACTION MARK)
@end example
-Range is a range of articles you wish to update marks on. Action is
-@code{set}, @code{add} or @code{del}, respectively used for removing all
-existing marks and setting them as specified, adding (preserving the
-marks not mentioned) mark and removing (preserving the marks not
-mentioned) marks. Mark is a list of marks; where each mark is a
-symbol. Currently used marks are @code{read}, @code{tick}, @code{reply},
-@code{expire}, @code{killed}, @code{dormant}, @code{save},
-@code{download} and @code{unsend}, but your backend should, if possible,
-not limit itself to theese.
+RANGE is a range of articles you wish to update marks on. ACTION is
+@code{add} or @code{del}, used to add marks or remove marks
+(preserving all marks not mentioned). MARK is a list of marks; where
+each mark is a symbol. Currently used marks are @code{read},
+@code{tick}, @code{reply}, @code{expire}, @code{killed},
+@code{dormant}, @code{save}, @code{download}, @code{unsend},
+@code{forward} and @code{recent}, but your back end should, if
+possible, not limit itself to these.
Given contradictory actions, the last action in the list should be the
-effective one. That is, if your action contains a request to add the
+effective one. That is, if your action contains a request to add the
@code{tick} mark on article 1 and, later in the list, a request to
remove the mark on the same article, the mark should in fact be removed.
@item (nnchoke-request-update-mark GROUP ARTICLE MARK)
-If the user tries to set a mark that the backend doesn't like, this
+If the user tries to set a mark that the back end doesn't like, this
function may change the mark. Gnus will use whatever this function
returns as the mark for @var{article} instead of the original
-@var{mark}. If the backend doesn't care, it must return the original
+@var{mark}. If the back end doesn't care, it must return the original
@var{mark}, and not @code{nil} or any other type of garbage.
The only use for this I can see is what @code{nnvirtual} does with
@item (nnchoke-request-scan &optional GROUP SERVER)
This function may be called at any time (by Gnus or anything else) to
-request that the backend check for incoming articles, in one way or
-another. A mail backend will typically read the spool file or query the
+request that the back end check for incoming articles, in one way or
+another. A mail back end will typically read the spool file or query the
POP server when this function is invoked. The @var{group} doesn't have
-to be heeded---if the backend decides that it is too much work just
+to be heeded---if the back end decides that it is too much work just
scanning for a single group, it may do a total scan of all groups. It
would be nice, however, to keep things local if that's practical.
@item (nnchoke-request-newgroups DATE &optional SERVER)
The result data from this function should be all groups that were
-created after @samp{date}, which is in normal human-readable date
-format. The data should be in the active buffer format.
+created after @samp{date}, which is in normal human-readable date format
+(i.e., the date format used in mail and news headers, and returned by
+the function @code{message-make-date} by default). The data should be
+in the active buffer format.
+
+It is okay for this function to return `too many' groups; some back ends
+might find it cheaper to return the full list of groups, rather than
+just the new groups. But don't do this for back ends with many groups.
+Normally, if the user creates the groups herself, there won't be too
+many groups, so @code{nnml} and the like are probably safe. But for
+back ends like @code{nntp}, where the groups have been created by the
+server, it is quite likely that there can be many groups.
@item (nnchoke-request-create-group GROUP &optional SERVER)
This function should run the expiry process on all articles in the
@var{articles} range (which is currently a simple list of article
-numbers.) It is left up to the backend to decide how old articles
+numbers.) It is left up to the back end to decide how old articles
should be before they are removed by this function. If @var{force} is
non-@code{nil}, all @var{articles} should be deleted, no matter how new
they are.
The function should return a cons where the @code{car} is the group name and
the @code{cdr} is the article number that the article was entered as.
+The group should exist before the backend is asked to accept the
+article for that group.
+
There should be no data returned.
@findex nnheader-report
@findex nnheader-get-report
-The backends should use the function @code{nnheader-report} to report
+The back ends should use the function @code{nnheader-report} to report
error conditions---they should not raise errors when they aren't able to
-perform a request. The first argument to this function is the backend
+perform a request. The first argument to this function is the back end
symbol, and the rest are interpreted as arguments to @code{format} if
there are multiple of them, or just a string if there is one of them.
This function must always returns @code{nil}.
Gnus, in turn, will call @code{nnheader-get-report} when it gets a
@code{nil} back from a server, and this function returns the most
-recently reported message for the backend in question. This function
+recently reported message for the back end in question. This function
takes one argument---the server symbol.
-Internally, these functions access @var{backend}@code{-status-string},
-so the @code{nnchoke} backend will have its error message stored in
+Internally, these functions access @var{back-end}@code{-status-string},
+so the @code{nnchoke} back end will have its error message stored in
@code{nnchoke-status-string}.
-@node Writing New Backends
-@subsubsection Writing New Backends
+@node Writing New Back Ends
+@subsubsection Writing New Back Ends
-Many backends are quite similar. @code{nnml} is just like
+Many back ends are quite similar. @code{nnml} is just like
@code{nnspool}, but it allows you to edit the articles on the server.
@code{nnmh} is just like @code{nnml}, but it doesn't use an active file,
and it doesn't maintain overview databases. @code{nndir} is just like
editing articles.
It would make sense if it were possible to ``inherit'' functions from
-backends when writing new backends. And, indeed, you can do that if you
+back ends when writing new back ends. And, indeed, you can do that if you
want to. (You don't have to if you don't want to, of course.)
-All the backends declare their public variables and functions by using a
+All the back ends declare their public variables and functions by using a
package called @code{nnoo}.
-To inherit functions from other backends (and allow other backends to
-inherit functions from the current backend), you should use the
+To inherit functions from other back ends (and allow other back ends to
+inherit functions from the current back end), you should use the
following macros:
@table @code
declared with @code{defvoo} instead of @code{defvar}.
In addition to the normal @code{defvar} parameters, it takes a list of
-variables in the parent backends to map the variable to when executing
-a function in those backends.
+variables in the parent back ends to map the variable to when executing
+a function in those back ends.
@lisp
(defvoo nndir-directory nil
of @code{nndir}. (The same with @code{nnmh}.)
@item nnoo-define-basics
-This macro defines some common functions that almost all backends should
+This macro defines some common functions that almost all back ends should
have.
@example
@item deffoo
This macro is just like @code{defun} and takes the same parameters. In
addition to doing the normal @code{defun} things, it registers the
-function as being public so that other backends can inherit it.
+function as being public so that other back ends can inherit it.
@item nnoo-map-functions
-This macro allows mapping of functions from the current backend to
-functions from the parent backends.
+This macro allows mapping of functions from the current back end to
+functions from the parent back ends.
@example
(nnoo-map-functions nndir
value of @code{nndir-current-group}.
@item nnoo-import
-This macro allows importing functions from backends. It should be the
+This macro allows importing functions from back ends. It should be the
last thing in the source file, since it will only define functions that
haven't already been defined.
@end table
-Below is a slightly shortened version of the @code{nndir} backend.
+Below is a slightly shortened version of the @code{nndir} back end.
@lisp
;;; nndir.el --- single directory newsgroup access for Gnus
"*Non-nil means that nndir will never retrieve NOV headers."
nnml-nov-is-evil)
-(defvoo nndir-current-group "" nil nnml-current-group nnmh-current-group)
+(defvoo nndir-current-group ""
+ nil
+ nnml-current-group nnmh-current-group)
(defvoo nndir-top-directory nil nil nnml-directory nnmh-directory)
(defvoo nndir-get-new-mail nil nil nnml-get-new-mail nnmh-get-new-mail)
(unless (assq 'nndir-directory defs)
(push `(nndir-directory ,server) defs))
(push `(nndir-current-group
- ,(file-name-nondirectory (directory-file-name nndir-directory)))
+ ,(file-name-nondirectory
+ (directory-file-name nndir-directory)))
defs)
(push `(nndir-top-directory
,(file-name-directory (directory-file-name nndir-directory)))
@end lisp
-@node Hooking New Backends Into Gnus
-@subsubsection Hooking New Backends Into Gnus
+@node Hooking New Back Ends Into Gnus
+@subsubsection Hooking New Back Ends Into Gnus
@vindex gnus-valid-select-methods
-Having Gnus start using your new backend is rather easy---you just
+@findex gnus-declare-backend
+Having Gnus start using your new back end is rather easy---you just
declare it with the @code{gnus-declare-backend} functions. This will
-enter the backend into the @code{gnus-valid-select-methods} variable.
+enter the back end into the @code{gnus-valid-select-methods} variable.
-@code{gnus-declare-backend} takes two parameters---the backend name and
+@code{gnus-declare-backend} takes two parameters---the back end name and
an arbitrary number of @dfn{abilities}.
Here's an example:
(gnus-declare-backend "nnchoke" 'mail 'respool 'address)
@end lisp
+The above line would then go in the @file{nnchoke.el} file.
+
The abilities can be:
@table @code
@item mail
-This is a mailish backend---followups should (probably) go via mail.
+This is a mailish back end---followups should (probably) go via mail.
@item post
-This is a newsish backend---followups should (probably) go via news.
+This is a newsish back end---followups should (probably) go via news.
@item post-mail
-This backend supports both mail and news.
+This back end supports both mail and news.
@item none
-This is neither a post nor mail backend---it's something completely
+This is neither a post nor mail back end---it's something completely
different.
@item respool
It supports respooling---or rather, it is able to modify its source
articles and groups.
@item address
The name of the server should be in the virtual server name. This is
-true for almost all backends.
+true for almost all back ends.
@item prompt-address
The user should be prompted for an address when doing commands like
-@kbd{B} in the group buffer. This is true for backends like
+@kbd{B} in the group buffer. This is true for back ends like
@code{nntp}, but not @code{nnmbox}, for instance.
@end table
-@node Mail-like Backends
-@subsubsection Mail-like Backends
+@node Mail-like Back Ends
+@subsubsection Mail-like Back Ends
-One of the things that separate the mail backends from the rest of the
-backends is the heavy dependence by the mail backends on common
-functions in @file{nnmail.el}. For instance, here's the definition of
-@code{nnml-request-scan}:
+One of the things that separate the mail back ends from the rest of the
+back ends is the heavy dependence by most of the mail back ends on
+common functions in @file{nnmail.el}. For instance, here's the
+definition of @code{nnml-request-scan}:
@lisp
(deffoo nnml-request-scan (&optional group server)
@table @var
@item method
-This should be a symbol to designate which backend is responsible for
+This should be a symbol to designate which back end is responsible for
the call.
@item exit-function
performed for one group only.
@end table
-@code{nnmail-get-new-mail} will call @var{backend}@code{-save-mail} to
-save each article. @var{backend}@code{-active-number} will be called to
+@code{nnmail-get-new-mail} will call @var{back-end}@code{-save-mail} to
+save each article. @var{back-end}@code{-active-number} will be called to
find the article number assigned to this article.
The function also uses the following variables:
-@var{backend}@code{-get-new-mail} (to see whether to get new mail for
-this backend); and @var{backend}@code{-group-alist} and
-@var{backend}@code{-active-file} to generate the new active file.
-@var{backend}@code{-group-alist} should be a group-active alist, like
+@var{back-end}@code{-get-new-mail} (to see whether to get new mail for
+this back end); and @var{back-end}@code{-group-alist} and
+@var{back-end}@code{-active-file} to generate the new active file.
+@var{back-end}@code{-group-alist} should be a group-active alist, like
this:
@example
BNF definition of a score file:
@example
-score-file = "" / "(" *element ")"
-element = rule / atom
-rule = string-rule / number-rule / date-rule
-string-rule = "(" quote string-header quote space *string-match ")"
-number-rule = "(" quote number-header quote space *number-match ")"
-date-rule = "(" quote date-header quote space *date-match ")"
-quote = <ascii 34>
-string-header = "subject" / "from" / "references" / "message-id" /
- "xref" / "body" / "head" / "all" / "followup"
-number-header = "lines" / "chars"
-date-header = "date"
-string-match = "(" quote <string> quote [ "" / [ space score [ "" /
- space date [ "" / [ space string-match-t ] ] ] ] ] ")"
-score = "nil" / <integer>
-date = "nil" / <natural number>
-string-match-t = "nil" / "s" / "substring" / "S" / "Substring" /
- "r" / "regex" / "R" / "Regex" /
- "e" / "exact" / "E" / "Exact" /
- "f" / "fuzzy" / "F" / "Fuzzy"
-number-match = "(" <integer> [ "" / [ space score [ "" /
- space date [ "" / [ space number-match-t ] ] ] ] ] ")"
-number-match-t = "nil" / "=" / "<" / ">" / ">=" / "<="
-date-match = "(" quote <string> quote [ "" / [ space score [ "" /
- space date [ "" / [ space date-match-t ] ] ] ] ")"
-date-match-t = "nil" / "at" / "before" / "after"
-atom = "(" [ required-atom / optional-atom ] ")"
-required-atom = mark / expunge / mark-and-expunge / files /
- exclude-files / read-only / touched
-optional-atom = adapt / local / eval
-mark = "mark" space nil-or-number
-nil-or-number = "nil" / <integer>
-expunge = "expunge" space nil-or-number
+score-file = "" / "(" *element ")"
+element = rule / atom
+rule = string-rule / number-rule / date-rule
+string-rule = "(" quote string-header quote space *string-match ")"
+number-rule = "(" quote number-header quote space *number-match ")"
+date-rule = "(" quote date-header quote space *date-match ")"
+quote = <ascii 34>
+string-header = "subject" / "from" / "references" / "message-id" /
+ "xref" / "body" / "head" / "all" / "followup"
+number-header = "lines" / "chars"
+date-header = "date"
+string-match = "(" quote <string> quote [ "" / [ space score [ "" /
+ space date [ "" / [ space string-match-t ] ] ] ] ] ")"
+score = "nil" / <integer>
+date = "nil" / <natural number>
+string-match-t = "nil" / "s" / "substring" / "S" / "Substring" /
+ "r" / "regex" / "R" / "Regex" /
+ "e" / "exact" / "E" / "Exact" /
+ "f" / "fuzzy" / "F" / "Fuzzy"
+number-match = "(" <integer> [ "" / [ space score [ "" /
+ space date [ "" / [ space number-match-t ] ] ] ] ] ")"
+number-match-t = "nil" / "=" / "<" / ">" / ">=" / "<="
+date-match = "(" quote <string> quote [ "" / [ space score [ "" /
+ space date [ "" / [ space date-match-t ] ] ] ] ")"
+date-match-t = "nil" / "at" / "before" / "after"
+atom = "(" [ required-atom / optional-atom ] ")"
+required-atom = mark / expunge / mark-and-expunge / files /
+ exclude-files / read-only / touched
+optional-atom = adapt / local / eval
+mark = "mark" space nil-or-number
+nil-or-number = "nil" / <integer>
+expunge = "expunge" space nil-or-number
mark-and-expunge = "mark-and-expunge" space nil-or-number
-files = "files" *[ space <string> ]
-exclude-files = "exclude-files" *[ space <string> ]
-read-only = "read-only" [ space "nil" / space "t" ]
-adapt = "adapt" [ space "ignore" / space "t" / space adapt-rule ]
-adapt-rule = "(" *[ <string> *[ "(" <string> <integer> ")" ] ")"
-local = "local" *[ space "(" <string> space <form> ")" ]
-eval = "eval" space <form>
-space = *[ " " / <TAB> / <NEWLINE> ]
+files = "files" *[ space <string> ]
+exclude-files = "exclude-files" *[ space <string> ]
+read-only = "read-only" [ space "nil" / space "t" ]
+adapt = "adapt" [ space "ignore" / space "t" / space adapt-rule ]
+adapt-rule = "(" *[ <string> *[ "(" <string> <integer> ")" ] ")"
+local = "local" *[ space "(" <string> space <form> ")" ]
+eval = "eval" space <form>
+space = *[ " " / <TAB> / <NEWLINE> ]
@end example
Any unrecognized elements in a score file should be ignored, but not
just shamelessly @emph{stole} the entire thing, and one would be right.
@dfn{Header} is a severely overloaded term. ``Header'' is used in
-RFC1036 to talk about lines in the head of an article (e.g.,
+RFC 1036 to talk about lines in the head of an article (e.g.,
@code{From}). It is used by many people as a synonym for
``head''---``the header and the body''. (That should be avoided, in my
opinion.) And Gnus uses a format internally that it calls ``header'',
@subsection Various File Formats
@menu
-* Active File Format:: Information on articles and groups available.
-* Newsgroups File Format:: Group descriptions.
+* Active File Format:: Information on articles and groups available.
+* Newsgroups File Format:: Group descriptions.
@end menu
@example
active = *group-line
-group-line = group space high-number space low-number space flag <NEWLINE>
+group-line = group spc high-number spc low-number spc flag <NEWLINE>
group = <non-white-space string>
-space = " "
+spc = " "
high-number = <non-negative integer>
low-number = <positive integer>
flag = "y" / "n" / "m" / "j" / "x" / "=" group
Believe it or not, but some people who use Gnus haven't really used
Emacs much before they embarked on their journey on the Gnus Love Boat.
-If you are one of those unfortunates whom ``@kbd{M-C-a}'', ``kill the
+If you are one of those unfortunates whom ``@kbd{C-M-a}'', ``kill the
region'', and ``set @code{gnus-flargblossen} to an alist where the key
is a regexp that is used for matching on the group name'' are magical
phrases with little or no meaning, then this appendix is for you. If
cat instead.
@menu
-* Keystrokes:: Entering text and executing commands.
-* Emacs Lisp:: The built-in Emacs programming language.
+* Keystrokes:: Entering text and executing commands.
+* Emacs Lisp:: The built-in Emacs programming language.
@end menu
to the left hand side of the keyboard, usually on the bottom row.
Now, us Emacs people don't say ``press the meta-control-m key'',
-because that's just too inconvenient. We say ``press the @kbd{M-C-m}
+because that's just too inconvenient. We say ``press the @kbd{C-M-m}
key''. @kbd{M-} is the prefix that means ``meta'' and ``C-'' is the
prefix that means ``control''. So ``press @kbd{C-k}'' means ``press
down the control key, and hold it down while you press @kbd{k}''.
-``Press @kbd{M-C-k}'' means ``press down and hold down the meta key and
+``Press @kbd{C-M-k}'' means ``press down and hold down the meta key and
the control key and then press @kbd{k}''. Simple, ay?
This is somewhat complicated by the fact that not all keyboards have a
This function (really ``special form'') @code{setq} is the one that can
set a variable to some value. This is really all you need to know. Now
-you can go and fill your @code{.emacs} file with lots of these to change
+you can go and fill your @file{.emacs} file with lots of these to change
how Gnus works.
-If you have put that thing in your @code{.emacs} file, it will be read
+If you have put that thing in your @file{.emacs} file, it will be read
and @code{eval}ed (which is lisp-ese for ``run'') the next time you
start Emacs. If you want to change the variable right away, simply say
@kbd{C-x C-e} after the closing parenthesis. That will @code{eval} the
@end iflatex
@end iftex
+@c Local Variables:
+@c mode: texinfo
+@c coding: iso-8859-1
@c End:
+% LocalWords: BNF mucho detailmenu cindex kindex kbd
+% LocalWords: findex Gnusae vindex dfn dfn samp nntp setq nnspool nntpserver
+% LocalWords: nnmbox newusers Blllrph NEWGROUPS dingnusdingnusdingnus
+% LocalWords: pre fab rec comp nnslashdot regex ga ga sci nnml nnbabyl nnmh
+% LocalWords: nnfolder emph looong eld newsreaders defun init elc pxref
projects / elisp / gnus.git- / blobdiff