2 # Guess values for system-dependent variables and create Makefiles.
3 # Generated by GNU Autoconf 2.59 for chise-base 0.23.
5 # Report bugs to <chise-en@m17n.org>.
7 # Copyright (C) 2003 Free Software Foundation, Inc.
8 # This configure script is free software; the Free Software Foundation
9 # gives unlimited permission to copy, distribute and modify it.
10 ## --------------------- ##
11 ## M4sh Initialization. ##
12 ## --------------------- ##
14 # Be Bourne compatible
15 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
18 # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
19 # is contrary to our usage. Disable this feature.
20 alias -g '${1+"$@"}'='"$@"'
21 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
24 DUALCASE=1; export DUALCASE # for MKS sh
26 # Support unset when possible.
27 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
34 # Work around bugs in pre-3.0 UWIN ksh.
35 $as_unset ENV MAIL MAILPATH
42 LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
43 LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
46 if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
47 eval $as_var=C; export $as_var
53 # Required to use basename.
54 if expr a : '\(a\)' >/dev/null 2>&1; then
60 if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
67 # Name of the executable.
68 as_me=`$as_basename "$0" ||
69 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
70 X"$0" : 'X\(//\)$' \| \
71 X"$0" : 'X\(/\)$' \| \
72 . : '\(.\)' 2>/dev/null ||
74 sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
75 /^X\/\(\/\/\)$/{ s//\1/; q; }
76 /^X\/\(\/\).*/{ s//\1/; q; }
80 # PATH needs CR, and LINENO needs CR and PATH.
81 # Avoid depending upon Character Ranges.
82 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
83 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
84 as_cr_Letters=$as_cr_letters$as_cr_LETTERS
85 as_cr_digits='0123456789'
86 as_cr_alnum=$as_cr_Letters$as_cr_digits
88 # The user is always right.
89 if test "${PATH_SEPARATOR+set}" != set; then
90 echo "#! /bin/sh" >conf$$.sh
91 echo "exit 0" >>conf$$.sh
93 if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
104 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
105 test "x$as_lineno_1" != "x$as_lineno_2" &&
106 test "x$as_lineno_3" = "x$as_lineno_2" || {
107 # Find who we are. Look in the path if we contain no path at all
110 *[\\/]* ) as_myself=$0 ;;
111 *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
115 test -z "$as_dir" && as_dir=.
116 test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
121 # We did not find ourselves, most probably we were run as `sh COMMAND'
122 # in which case we are not to be found in the path.
123 if test "x$as_myself" = x; then
126 if test ! -f "$as_myself"; then
127 { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
128 { (exit 1); exit 1; }; }
130 case $CONFIG_SHELL in
132 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
133 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
136 test -z "$as_dir" && as_dir=.
137 for as_base in sh bash ksh sh5; do
140 if ("$as_dir/$as_base" -c '
143 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
144 test "x$as_lineno_1" != "x$as_lineno_2" &&
145 test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
146 $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
147 $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
148 CONFIG_SHELL=$as_dir/$as_base
150 exec "$CONFIG_SHELL" "$0" ${1+"$@"}
158 # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
159 # uniformly replaced by the line number. The first 'sed' inserts a
160 # line-number line before each line; the second 'sed' does the real
161 # work. The second script uses 'N' to pair each line-number line
162 # with the numbered line, and appends trailing '-' during
163 # substitution so that $LINENO is not a special case at line end.
164 # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
165 # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
166 sed '=' <$as_myself |
171 s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
174 s,^['$as_cr_digits']*\n,,
176 chmod +x $as_me.lineno ||
177 { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
178 { (exit 1); exit 1; }; }
180 # Don't try to exec as it changes $[0], causing all sort of problems
181 # (the dirname of $[0] is not the place where we might find the
182 # original and so on. Autoconf is especially sensible to this).
184 # Exit status is that of the last command.
189 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
190 *c*,-n*) ECHO_N= ECHO_C='
192 *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
193 *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
196 if expr a : '\(a\)' >/dev/null 2>&1; then
202 rm -f conf$$ conf$$.exe conf$$.file
204 if ln -s conf$$.file conf$$ 2>/dev/null; then
205 # We could just check for DJGPP; but this test a) works b) is more generic
206 # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
207 if test -f conf$$.exe; then
208 # Don't use ln at all; we don't have any links
213 elif ln conf$$.file conf$$ 2>/dev/null; then
218 rm -f conf$$ conf$$.exe conf$$.file
220 if mkdir -p . 2>/dev/null; then
223 test -d ./-p && rmdir ./-p
227 as_executable_p="test -f"
229 # Sed expression to map a string onto a valid CPP name.
230 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
232 # Sed expression to map a string onto a valid variable name.
233 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
237 # We need space, tab and new line, in precisely that order.
247 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
248 # so uname gets run too.
249 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
256 ac_default_prefix=/usr/local
257 ac_config_libobj_dir=.
262 SHELL=${CONFIG_SHELL-/bin/sh}
264 # Maximum number of lines to put in a shell here document.
265 # This variable seems obsolete. It should probably be removed, and
266 # only ac_max_sed_lines should be used.
267 : ${ac_max_here_lines=38}
269 # Identity of this package.
270 PACKAGE_NAME='chise-base'
271 PACKAGE_TARNAME='chise-base'
272 PACKAGE_VERSION='0.23'
273 PACKAGE_STRING='chise-base 0.23'
274 PACKAGE_BUGREPORT='chise-en@m17n.org'
276 ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os ac_configure_args xemacs_site_includes xemacs_site_libraries xemacs_opts cvs_root LIBOBJS LTLIBOBJS'
279 # Initialize some variables set by options.
281 ac_init_version=false
282 # The variables have the same names as the options, with
283 # dashes changed to underlines.
291 program_transform_name=s,x,x,
299 # Installation directory options.
300 # These are left unexpanded so users can "make install exec_prefix=/foo"
301 # and all the variables that are supposed to be based on exec_prefix
302 # by default will actually change.
303 # Use braces instead of parens because sh, perl, etc. also accept them.
304 bindir='${exec_prefix}/bin'
305 sbindir='${exec_prefix}/sbin'
306 libexecdir='${exec_prefix}/libexec'
307 datadir='${prefix}/share'
308 sysconfdir='${prefix}/etc'
309 sharedstatedir='${prefix}/com'
310 localstatedir='${prefix}/var'
311 libdir='${exec_prefix}/lib'
312 includedir='${prefix}/include'
313 oldincludedir='/usr/include'
314 infodir='${prefix}/info'
315 mandir='${prefix}/man'
320 # If the previous option needs an argument, assign it.
321 if test -n "$ac_prev"; then
322 eval "$ac_prev=\$ac_option"
327 ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
329 # Accept the important Cygnus configure options, so we can diagnose typos.
333 -bindir | --bindir | --bindi | --bind | --bin | --bi)
335 -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
338 -build | --build | --buil | --bui | --bu)
339 ac_prev=build_alias ;;
340 -build=* | --build=* | --buil=* | --bui=* | --bu=*)
341 build_alias=$ac_optarg ;;
343 -cache-file | --cache-file | --cache-fil | --cache-fi \
344 | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
345 ac_prev=cache_file ;;
346 -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
347 | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
348 cache_file=$ac_optarg ;;
351 cache_file=config.cache ;;
353 -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
355 -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
357 datadir=$ac_optarg ;;
359 -disable-* | --disable-*)
360 ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
361 # Reject names that are not valid shell variable names.
362 expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
363 { echo "$as_me: error: invalid feature name: $ac_feature" >&2
364 { (exit 1); exit 1; }; }
365 ac_feature=`echo $ac_feature | sed 's/-/_/g'`
366 eval "enable_$ac_feature=no" ;;
368 -enable-* | --enable-*)
369 ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
370 # Reject names that are not valid shell variable names.
371 expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
372 { echo "$as_me: error: invalid feature name: $ac_feature" >&2
373 { (exit 1); exit 1; }; }
374 ac_feature=`echo $ac_feature | sed 's/-/_/g'`
376 *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
379 eval "enable_$ac_feature='$ac_optarg'" ;;
381 -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
382 | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
383 | --exec | --exe | --ex)
384 ac_prev=exec_prefix ;;
385 -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
386 | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
387 | --exec=* | --exe=* | --ex=*)
388 exec_prefix=$ac_optarg ;;
390 -gas | --gas | --ga | --g)
391 # Obsolete; use --with-gas.
394 -help | --help | --hel | --he | -h)
396 -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
397 ac_init_help=recursive ;;
398 -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
399 ac_init_help=short ;;
401 -host | --host | --hos | --ho)
402 ac_prev=host_alias ;;
403 -host=* | --host=* | --hos=* | --ho=*)
404 host_alias=$ac_optarg ;;
406 -includedir | --includedir | --includedi | --included | --include \
407 | --includ | --inclu | --incl | --inc)
408 ac_prev=includedir ;;
409 -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
410 | --includ=* | --inclu=* | --incl=* | --inc=*)
411 includedir=$ac_optarg ;;
413 -infodir | --infodir | --infodi | --infod | --info | --inf)
415 -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
416 infodir=$ac_optarg ;;
418 -libdir | --libdir | --libdi | --libd)
420 -libdir=* | --libdir=* | --libdi=* | --libd=*)
423 -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
424 | --libexe | --libex | --libe)
425 ac_prev=libexecdir ;;
426 -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
427 | --libexe=* | --libex=* | --libe=*)
428 libexecdir=$ac_optarg ;;
430 -localstatedir | --localstatedir | --localstatedi | --localstated \
431 | --localstate | --localstat | --localsta | --localst \
432 | --locals | --local | --loca | --loc | --lo)
433 ac_prev=localstatedir ;;
434 -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
435 | --localstate=* | --localstat=* | --localsta=* | --localst=* \
436 | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
437 localstatedir=$ac_optarg ;;
439 -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
441 -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
445 # Obsolete; use --without-fp.
448 -no-create | --no-create | --no-creat | --no-crea | --no-cre \
449 | --no-cr | --no-c | -n)
452 -no-recursion | --no-recursion | --no-recursio | --no-recursi \
453 | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
456 -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
457 | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
458 | --oldin | --oldi | --old | --ol | --o)
459 ac_prev=oldincludedir ;;
460 -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
461 | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
462 | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
463 oldincludedir=$ac_optarg ;;
465 -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
467 -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
470 -program-prefix | --program-prefix | --program-prefi | --program-pref \
471 | --program-pre | --program-pr | --program-p)
472 ac_prev=program_prefix ;;
473 -program-prefix=* | --program-prefix=* | --program-prefi=* \
474 | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
475 program_prefix=$ac_optarg ;;
477 -program-suffix | --program-suffix | --program-suffi | --program-suff \
478 | --program-suf | --program-su | --program-s)
479 ac_prev=program_suffix ;;
480 -program-suffix=* | --program-suffix=* | --program-suffi=* \
481 | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
482 program_suffix=$ac_optarg ;;
484 -program-transform-name | --program-transform-name \
485 | --program-transform-nam | --program-transform-na \
486 | --program-transform-n | --program-transform- \
487 | --program-transform | --program-transfor \
488 | --program-transfo | --program-transf \
489 | --program-trans | --program-tran \
490 | --progr-tra | --program-tr | --program-t)
491 ac_prev=program_transform_name ;;
492 -program-transform-name=* | --program-transform-name=* \
493 | --program-transform-nam=* | --program-transform-na=* \
494 | --program-transform-n=* | --program-transform-=* \
495 | --program-transform=* | --program-transfor=* \
496 | --program-transfo=* | --program-transf=* \
497 | --program-trans=* | --program-tran=* \
498 | --progr-tra=* | --program-tr=* | --program-t=*)
499 program_transform_name=$ac_optarg ;;
501 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
502 | -silent | --silent | --silen | --sile | --sil)
505 -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
507 -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
509 sbindir=$ac_optarg ;;
511 -sharedstatedir | --sharedstatedir | --sharedstatedi \
512 | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
513 | --sharedst | --shareds | --shared | --share | --shar \
515 ac_prev=sharedstatedir ;;
516 -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
517 | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
518 | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
520 sharedstatedir=$ac_optarg ;;
522 -site | --site | --sit)
524 -site=* | --site=* | --sit=*)
527 -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
529 -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
532 -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
533 | --syscon | --sysco | --sysc | --sys | --sy)
534 ac_prev=sysconfdir ;;
535 -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
536 | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
537 sysconfdir=$ac_optarg ;;
539 -target | --target | --targe | --targ | --tar | --ta | --t)
540 ac_prev=target_alias ;;
541 -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
542 target_alias=$ac_optarg ;;
544 -v | -verbose | --verbose | --verbos | --verbo | --verb)
547 -version | --version | --versio | --versi | --vers | -V)
551 ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
552 # Reject names that are not valid shell variable names.
553 expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
554 { echo "$as_me: error: invalid package name: $ac_package" >&2
555 { (exit 1); exit 1; }; }
556 ac_package=`echo $ac_package| sed 's/-/_/g'`
558 *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
561 eval "with_$ac_package='$ac_optarg'" ;;
563 -without-* | --without-*)
564 ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
565 # Reject names that are not valid shell variable names.
566 expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
567 { echo "$as_me: error: invalid package name: $ac_package" >&2
568 { (exit 1); exit 1; }; }
569 ac_package=`echo $ac_package | sed 's/-/_/g'`
570 eval "with_$ac_package=no" ;;
573 # Obsolete; use --with-x.
576 -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
577 | --x-incl | --x-inc | --x-in | --x-i)
578 ac_prev=x_includes ;;
579 -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
580 | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
581 x_includes=$ac_optarg ;;
583 -x-libraries | --x-libraries | --x-librarie | --x-librari \
584 | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
585 ac_prev=x_libraries ;;
586 -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
587 | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
588 x_libraries=$ac_optarg ;;
590 -*) { echo "$as_me: error: unrecognized option: $ac_option
591 Try \`$0 --help' for more information." >&2
592 { (exit 1); exit 1; }; }
596 ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
597 # Reject names that are not valid shell variable names.
598 expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
599 { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
600 { (exit 1); exit 1; }; }
601 ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
602 eval "$ac_envvar='$ac_optarg'"
606 # FIXME: should be removed in autoconf 3.0.
607 echo "$as_me: WARNING: you should use --build, --host, --target" >&2
608 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
609 echo "$as_me: WARNING: invalid host type: $ac_option" >&2
610 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
616 if test -n "$ac_prev"; then
617 ac_option=--`echo $ac_prev | sed 's/_/-/g'`
618 { echo "$as_me: error: missing argument to $ac_option" >&2
619 { (exit 1); exit 1; }; }
622 # Be sure to have absolute paths.
623 for ac_var in exec_prefix prefix
625 eval ac_val=$`echo $ac_var`
627 [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
628 *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
629 { (exit 1); exit 1; }; };;
633 # Be sure to have absolute paths.
634 for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
635 localstatedir libdir includedir oldincludedir infodir mandir
637 eval ac_val=$`echo $ac_var`
639 [\\/$]* | ?:[\\/]* ) ;;
640 *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
641 { (exit 1); exit 1; }; };;
645 # There might be people who depend on the old broken behavior: `$host'
646 # used to hold the argument of --host etc.
647 # FIXME: To remove some day.
652 # FIXME: To remove some day.
653 if test "x$host_alias" != x; then
654 if test "x$build_alias" = x; then
655 cross_compiling=maybe
656 echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
657 If a cross compiler is detected then cross compile mode will be used." >&2
658 elif test "x$build_alias" != "x$host_alias"; then
664 test -n "$host_alias" && ac_tool_prefix=$host_alias-
666 test "$silent" = yes && exec 6>/dev/null
669 # Find the source files, if location was not specified.
670 if test -z "$srcdir"; then
671 ac_srcdir_defaulted=yes
672 # Try the directory containing this script, then its parent.
673 ac_confdir=`(dirname "$0") 2>/dev/null ||
674 $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
675 X"$0" : 'X\(//\)[^/]' \| \
676 X"$0" : 'X\(//\)$' \| \
677 X"$0" : 'X\(/\)' \| \
678 . : '\(.\)' 2>/dev/null ||
680 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
681 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
682 /^X\(\/\/\)$/{ s//\1/; q; }
683 /^X\(\/\).*/{ s//\1/; q; }
686 if test ! -r $srcdir/$ac_unique_file; then
690 ac_srcdir_defaulted=no
692 if test ! -r $srcdir/$ac_unique_file; then
693 if test "$ac_srcdir_defaulted" = yes; then
694 { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
695 { (exit 1); exit 1; }; }
697 { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
698 { (exit 1); exit 1; }; }
701 (cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
702 { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
703 { (exit 1); exit 1; }; }
704 srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
705 ac_env_build_alias_set=${build_alias+set}
706 ac_env_build_alias_value=$build_alias
707 ac_cv_env_build_alias_set=${build_alias+set}
708 ac_cv_env_build_alias_value=$build_alias
709 ac_env_host_alias_set=${host_alias+set}
710 ac_env_host_alias_value=$host_alias
711 ac_cv_env_host_alias_set=${host_alias+set}
712 ac_cv_env_host_alias_value=$host_alias
713 ac_env_target_alias_set=${target_alias+set}
714 ac_env_target_alias_value=$target_alias
715 ac_cv_env_target_alias_set=${target_alias+set}
716 ac_cv_env_target_alias_value=$target_alias
719 # Report the --help message.
721 if test "$ac_init_help" = "long"; then
722 # Omit some internal or obsolete options to make the list less imposing.
723 # This message is too long to be a string in the A/UX 3.1 sh.
725 \`configure' configures chise-base 0.23 to adapt to many kinds of systems.
727 Usage: $0 [OPTION]... [VAR=VALUE]...
729 To assign environment variables (e.g., CC, CFLAGS...), specify them as
730 VAR=VALUE. See below for descriptions of some of the useful variables.
732 Defaults for the options are specified in brackets.
735 -h, --help display this help and exit
736 --help=short display options specific to this package
737 --help=recursive display the short help of all the included packages
738 -V, --version display version information and exit
739 -q, --quiet, --silent do not print \`checking...' messages
740 --cache-file=FILE cache test results in FILE [disabled]
741 -C, --config-cache alias for \`--cache-file=config.cache'
742 -n, --no-create do not create output files
743 --srcdir=DIR find the sources in DIR [configure dir or \`..']
748 Installation directories:
749 --prefix=PREFIX install architecture-independent files in PREFIX
751 --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
754 By default, \`make install' will install all the files in
755 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
756 an installation prefix other than \`$ac_default_prefix' using \`--prefix',
757 for instance \`--prefix=\$HOME'.
759 For better control, use the options below.
761 Fine tuning of the installation directories:
762 --bindir=DIR user executables [EPREFIX/bin]
763 --sbindir=DIR system admin executables [EPREFIX/sbin]
764 --libexecdir=DIR program executables [EPREFIX/libexec]
765 --datadir=DIR read-only architecture-independent data [PREFIX/share]
766 --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
767 --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
768 --localstatedir=DIR modifiable single-machine data [PREFIX/var]
769 --libdir=DIR object code libraries [EPREFIX/lib]
770 --includedir=DIR C header files [PREFIX/include]
771 --oldincludedir=DIR C header files for non-gcc [/usr/include]
772 --infodir=DIR info documentation [PREFIX/info]
773 --mandir=DIR man documentation [PREFIX/man]
779 --build=BUILD configure for building on BUILD [guessed]
780 --host=HOST cross-compile to build programs to run on HOST [BUILD]
781 --target=TARGET configure for building compilers for TARGET [HOST]
785 if test -n "$ac_init_help"; then
786 case $ac_init_help in
787 short | recursive ) echo "Configuration of chise-base 0.23:";;
791 Report bugs to <chise-en@m17n.org>.
795 if test "$ac_init_help" = "recursive"; then
796 # If there are subdirs, report their specific --help.
798 for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
799 test -d $ac_dir || continue
802 if test "$ac_dir" != .; then
803 ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
804 # A "../" for each directory in $ac_dir_suffix.
805 ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
807 ac_dir_suffix= ac_top_builddir=
811 .) # No --srcdir option. We are building in place.
813 if test -z "$ac_top_builddir"; then
816 ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
818 [\\/]* | ?:[\\/]* ) # Absolute path.
819 ac_srcdir=$srcdir$ac_dir_suffix;
820 ac_top_srcdir=$srcdir ;;
822 ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
823 ac_top_srcdir=$ac_top_builddir$srcdir ;;
826 # Do not use `cd foo && pwd` to compute absolute paths, because
827 # the directories may not exist.
829 .) ac_abs_builddir="$ac_dir";;
832 .) ac_abs_builddir=`pwd`;;
833 [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
834 *) ac_abs_builddir=`pwd`/"$ac_dir";;
837 case $ac_abs_builddir in
838 .) ac_abs_top_builddir=${ac_top_builddir}.;;
840 case ${ac_top_builddir}. in
841 .) ac_abs_top_builddir=$ac_abs_builddir;;
842 [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
843 *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
846 case $ac_abs_builddir in
847 .) ac_abs_srcdir=$ac_srcdir;;
850 .) ac_abs_srcdir=$ac_abs_builddir;;
851 [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
852 *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
855 case $ac_abs_builddir in
856 .) ac_abs_top_srcdir=$ac_top_srcdir;;
858 case $ac_top_srcdir in
859 .) ac_abs_top_srcdir=$ac_abs_builddir;;
860 [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
861 *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
866 # Check for guested configure; otherwise get Cygnus style configure.
867 if test -f $ac_srcdir/configure.gnu; then
869 $SHELL $ac_srcdir/configure.gnu --help=recursive
870 elif test -f $ac_srcdir/configure; then
872 $SHELL $ac_srcdir/configure --help=recursive
873 elif test -f $ac_srcdir/configure.ac ||
874 test -f $ac_srcdir/configure.in; then
878 echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
884 test -n "$ac_init_help" && exit 0
885 if $ac_init_version; then
887 chise-base configure 0.23
888 generated by GNU Autoconf 2.59
890 Copyright (C) 2003 Free Software Foundation, Inc.
891 This configure script is free software; the Free Software Foundation
892 gives unlimited permission to copy, distribute and modify it.
898 This file contains any messages produced by compilers while
899 running configure, to aid debugging if configure makes a mistake.
901 It was created by chise-base $as_me 0.23, which was
902 generated by GNU Autoconf 2.59. Invocation command line was
913 hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
914 uname -m = `(uname -m) 2>/dev/null || echo unknown`
915 uname -r = `(uname -r) 2>/dev/null || echo unknown`
916 uname -s = `(uname -s) 2>/dev/null || echo unknown`
917 uname -v = `(uname -v) 2>/dev/null || echo unknown`
919 /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
920 /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
922 /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
923 /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
924 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
925 hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
926 /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
927 /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
928 /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
932 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
936 test -z "$as_dir" && as_dir=.
952 # Keep a trace of the command line.
953 # Strip out --no-create and --no-recursion so they do not pile up.
954 # Strip out --silent because we don't want to record it for future runs.
955 # Also quote any args containing shell meta-characters.
956 # Make two passes to allow for proper duplicate-argument suppression.
961 ac_must_keep_next=false
967 -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
968 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
969 | -silent | --silent | --silen | --sile | --sil)
971 *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
972 ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
975 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
977 ac_configure_args1="$ac_configure_args1 '$ac_arg'"
978 if test $ac_must_keep_next = true; then
979 ac_must_keep_next=false # Got value, back to normal.
982 *=* | --config-cache | -C | -disable-* | --disable-* \
983 | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
984 | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
985 | -with-* | --with-* | -without-* | --without-* | --x)
986 case "$ac_configure_args0 " in
987 "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
990 -* ) ac_must_keep_next=true ;;
993 ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
994 # Get rid of the leading space.
1000 $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
1001 $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
1003 # When interrupted or exit'd, cleanup temporary files, and complete
1004 # config.log. We remove comments because anyway the quotes in there
1005 # would cause problems or look ugly.
1006 # WARNING: Be sure not to use single quotes in there, as some shells,
1007 # such as our DU 5.0 friend, will then `close' the trap.
1008 trap 'exit_status=$?
1009 # Save into config.log some information that might help in debugging.
1014 ## ---------------- ##
1015 ## Cache variables. ##
1016 ## ---------------- ##
1019 # The following way of writing the cache mishandles newlines in values,
1022 case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
1025 "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
1026 s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
1030 "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1037 ## ----------------- ##
1038 ## Output variables. ##
1039 ## ----------------- ##
1042 for ac_var in $ac_subst_vars
1044 eval ac_val=$`echo $ac_var`
1045 echo "$ac_var='"'"'$ac_val'"'"'"
1049 if test -n "$ac_subst_files"; then
1056 for ac_var in $ac_subst_files
1058 eval ac_val=$`echo $ac_var`
1059 echo "$ac_var='"'"'$ac_val'"'"'"
1064 if test -s confdefs.h; then
1071 sed "/^$/d" confdefs.h | sort
1074 test "$ac_signal" != 0 &&
1075 echo "$as_me: caught signal $ac_signal"
1076 echo "$as_me: exit $exit_status"
1078 rm -f core *.core &&
1079 rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
1082 for ac_signal in 1 2 13 15; do
1083 trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
1087 # confdefs.h avoids OS command line length limits that DEFS can exceed.
1088 rm -rf conftest* confdefs.h
1089 # AIX cpp loses on an empty file, so make sure it contains at least a newline.
1092 # Predefined preprocessor variables.
1094 cat >>confdefs.h <<_ACEOF
1095 #define PACKAGE_NAME "$PACKAGE_NAME"
1099 cat >>confdefs.h <<_ACEOF
1100 #define PACKAGE_TARNAME "$PACKAGE_TARNAME"
1104 cat >>confdefs.h <<_ACEOF
1105 #define PACKAGE_VERSION "$PACKAGE_VERSION"
1109 cat >>confdefs.h <<_ACEOF
1110 #define PACKAGE_STRING "$PACKAGE_STRING"
1114 cat >>confdefs.h <<_ACEOF
1115 #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
1119 # Let the site file select an alternate cache file if it wants to.
1120 # Prefer explicitly selected file to automatically selected ones.
1121 if test -z "$CONFIG_SITE"; then
1122 if test "x$prefix" != xNONE; then
1123 CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
1125 CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
1128 for ac_site_file in $CONFIG_SITE; do
1129 if test -r "$ac_site_file"; then
1130 { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
1131 echo "$as_me: loading site script $ac_site_file" >&6;}
1132 sed 's/^/| /' "$ac_site_file" >&5
1137 if test -r "$cache_file"; then
1138 # Some versions of bash will fail to source /dev/null (special
1139 # files actually), so we avoid doing that.
1140 if test -f "$cache_file"; then
1141 { echo "$as_me:$LINENO: loading cache $cache_file" >&5
1142 echo "$as_me: loading cache $cache_file" >&6;}
1144 [\\/]* | ?:[\\/]* ) . $cache_file;;
1145 *) . ./$cache_file;;
1149 { echo "$as_me:$LINENO: creating cache $cache_file" >&5
1150 echo "$as_me: creating cache $cache_file" >&6;}
1154 # Check that the precious variables saved in the cache have kept the same
1156 ac_cache_corrupted=false
1157 for ac_var in `(set) 2>&1 |
1158 sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
1159 eval ac_old_set=\$ac_cv_env_${ac_var}_set
1160 eval ac_new_set=\$ac_env_${ac_var}_set
1161 eval ac_old_val="\$ac_cv_env_${ac_var}_value"
1162 eval ac_new_val="\$ac_env_${ac_var}_value"
1163 case $ac_old_set,$ac_new_set in
1165 { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
1166 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
1167 ac_cache_corrupted=: ;;
1169 { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
1170 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
1171 ac_cache_corrupted=: ;;
1174 if test "x$ac_old_val" != "x$ac_new_val"; then
1175 { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
1176 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
1177 { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
1178 echo "$as_me: former value: $ac_old_val" >&2;}
1179 { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
1180 echo "$as_me: current value: $ac_new_val" >&2;}
1181 ac_cache_corrupted=:
1184 # Pass precious variables to config.status.
1185 if test "$ac_new_set" = set; then
1187 *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
1188 ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
1189 *) ac_arg=$ac_var=$ac_new_val ;;
1191 case " $ac_configure_args " in
1192 *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
1193 *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
1197 if $ac_cache_corrupted; then
1198 { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
1199 echo "$as_me: error: changes in the environment can compromise the build" >&2;}
1200 { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
1201 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
1202 { (exit 1); exit 1; }; }
1206 ac_cpp='$CPP $CPPFLAGS'
1207 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1208 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1209 ac_compiler_gnu=$ac_cv_c_compiler_gnu
1239 for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
1240 if test -f $ac_dir/install-sh; then
1242 ac_install_sh="$ac_aux_dir/install-sh -c"
1244 elif test -f $ac_dir/install.sh; then
1246 ac_install_sh="$ac_aux_dir/install.sh -c"
1248 elif test -f $ac_dir/shtool; then
1250 ac_install_sh="$ac_aux_dir/shtool install -c"
1254 if test -z "$ac_aux_dir"; then
1255 { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
1256 echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
1257 { (exit 1); exit 1; }; }
1259 ac_config_guess="$SHELL $ac_aux_dir/config.guess"
1260 ac_config_sub="$SHELL $ac_aux_dir/config.sub"
1261 ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
1263 # Make sure we can run config.sub.
1264 $ac_config_sub sun4 >/dev/null 2>&1 ||
1265 { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
1266 echo "$as_me: error: cannot run $ac_config_sub" >&2;}
1267 { (exit 1); exit 1; }; }
1269 echo "$as_me:$LINENO: checking build system type" >&5
1270 echo $ECHO_N "checking build system type... $ECHO_C" >&6
1271 if test "${ac_cv_build+set}" = set; then
1272 echo $ECHO_N "(cached) $ECHO_C" >&6
1274 ac_cv_build_alias=$build_alias
1275 test -z "$ac_cv_build_alias" &&
1276 ac_cv_build_alias=`$ac_config_guess`
1277 test -z "$ac_cv_build_alias" &&
1278 { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
1279 echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
1280 { (exit 1); exit 1; }; }
1281 ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
1282 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
1283 echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
1284 { (exit 1); exit 1; }; }
1287 echo "$as_me:$LINENO: result: $ac_cv_build" >&5
1288 echo "${ECHO_T}$ac_cv_build" >&6
1290 build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1291 build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1292 build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1295 echo "$as_me:$LINENO: checking host system type" >&5
1296 echo $ECHO_N "checking host system type... $ECHO_C" >&6
1297 if test "${ac_cv_host+set}" = set; then
1298 echo $ECHO_N "(cached) $ECHO_C" >&6
1300 ac_cv_host_alias=$host_alias
1301 test -z "$ac_cv_host_alias" &&
1302 ac_cv_host_alias=$ac_cv_build_alias
1303 ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
1304 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
1305 echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
1306 { (exit 1); exit 1; }; }
1309 echo "$as_me:$LINENO: result: $ac_cv_host" >&5
1310 echo "${ECHO_T}$ac_cv_host" >&6
1312 host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1313 host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1314 host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1317 echo "$as_me:$LINENO: checking target system type" >&5
1318 echo $ECHO_N "checking target system type... $ECHO_C" >&6
1319 if test "${ac_cv_target+set}" = set; then
1320 echo $ECHO_N "(cached) $ECHO_C" >&6
1322 ac_cv_target_alias=$target_alias
1323 test "x$ac_cv_target_alias" = "x" &&
1324 ac_cv_target_alias=$ac_cv_host_alias
1325 ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
1326 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
1327 echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
1328 { (exit 1); exit 1; }; }
1331 echo "$as_me:$LINENO: result: $ac_cv_target" >&5
1332 echo "${ECHO_T}$ac_cv_target" >&6
1333 target=$ac_cv_target
1334 target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1335 target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1336 target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1339 # The aliases save the names the user supplied, while $host etc.
1340 # will get canonicalized.
1341 test -n "$target_alias" &&
1342 test "$program_prefix$program_suffix$program_transform_name" = \
1344 program_prefix=${target_alias}-
1346 # Checks for programs.
1349 # AC_CHECK_PROGS(LIBTOOL, glibtool libtool, libtool, \
1350 # /usr/local/bin:/opt/bin:/sw/bin:/usr/bin:/bin)
1358 if test -f CVS/Root; then
1359 cvs_root=`cat CVS/Root`
1361 cvs_root=':pserver:anonymous@cvs.m17n.org:/cvs/chise'
1364 # Checks for libraries.
1365 if test -d /sw/include; then
1366 xemacs_site_includes="/sw/include"
1367 xemacs_site_libraries="/sw/lib"
1368 xemacs_opts="--with-dialogs=athena --with-widgets=athena --with-athena=3d"
1370 if test -f /sw/include/db3/db.h; then
1371 xemacs_site_includes="$xemacs_site_includes:/sw/include/db3"
1372 elif test -f /sw/include/db4/db.h; then
1373 xemacs_site_includes="$xemacs_site_includes:/sw/include/db4"
1376 if test "$xemacs_site_includes" != ""; then
1377 xemacs_opts="$xemacs_opts --site-includes=$xemacs_site_includes"
1380 if test "$xemacs_site_libraries" != ""; then
1381 xemacs_opts="$xemacs_opts --site-libraries=$xemacs_site_libraries"
1385 # Checks for header files.
1387 # Checks for typedefs, structures, and compiler characteristics.
1391 # Checks for library functions.
1395 #AC_CHECK_FUNCS(strnlen)
1397 ac_config_files="$ac_config_files Makefile"
1399 cat >confcache <<\_ACEOF
1400 # This file is a shell script that caches the results of configure
1401 # tests run on this system so they can be shared between configure
1402 # scripts and configure runs, see configure's option --config-cache.
1403 # It is not useful on other systems. If it contains results you don't
1404 # want to keep, you may remove or edit it.
1406 # config.status only pays attention to the cache file if you give it
1407 # the --recheck option to rerun configure.
1409 # `ac_cv_env_foo' variables (set or unset) will be overridden when
1410 # loading this file, other *unset* `ac_cv_foo' will be assigned the
1415 # The following way of writing the cache mishandles newlines in values,
1416 # but we know of no workaround that is simple, portable, and efficient.
1417 # So, don't put newlines in cache variables' values.
1418 # Ultrix sh set writes to stderr and can't be redirected directly,
1419 # and sets the high bit in the cache file unless we assign to the vars.
1422 case `(ac_space=' '; set | grep ac_space) 2>&1` in
1424 # `set' does not quote correctly, so add quotes (double-quote
1425 # substitution turns \\\\ into \\, and sed turns \\ into \).
1428 s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
1431 # `set' quotes correctly as required by POSIX, so do not add quotes.
1433 "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1440 s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
1442 /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
1444 if diff $cache_file confcache >/dev/null 2>&1; then :; else
1445 if test -w $cache_file; then
1446 test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
1447 cat confcache >$cache_file
1449 echo "not updating unwritable cache $cache_file"
1454 test "x$prefix" = xNONE && prefix=$ac_default_prefix
1455 # Let make expand exec_prefix.
1456 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
1458 # VPATH may cause trouble with some makes, so we remove $(srcdir),
1459 # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
1460 # trailing colons and then remove the whole line if VPATH becomes empty
1461 # (actually we leave an empty line to preserve line numbers).
1462 if test "x$srcdir" = x.; then
1463 ac_vpsub='/^[ ]*VPATH[ ]*=/{
1464 s/:*\$(srcdir):*/:/;
1465 s/:*\${srcdir}:*/:/;
1467 s/^\([^=]*=[ ]*\):*/\1/;
1473 # Transform confdefs.h into DEFS.
1474 # Protect against shell expansion while executing Makefile rules.
1475 # Protect against Makefile macro expansion.
1477 # If the first sed substitution is executed (which looks for macros that
1478 # take arguments), then we branch to the quote section. Otherwise,
1479 # look for a macro that doesn't take arguments.
1480 cat >confdef2opt.sed <<\_ACEOF
1483 s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
1485 s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
1489 s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
1495 # We use echo to avoid assuming a particular line-breaking character.
1496 # The extra dot is to prevent the shell from consuming trailing
1497 # line-breaks from the sub-command output. A line-break within
1498 # single-quotes doesn't work because, if this script is created in a
1499 # platform that uses two characters for line-breaks (e.g., DOS), tr
1501 ac_LF_and_DOT=`echo; echo .`
1502 DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
1503 rm -f confdef2opt.sed
1508 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
1509 # 1. Remove the extension, and $U if already installed.
1510 ac_i=`echo "$ac_i" |
1511 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
1513 ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
1514 ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
1518 LTLIBOBJS=$ac_ltlibobjs
1522 : ${CONFIG_STATUS=./config.status}
1523 ac_clean_files_save=$ac_clean_files
1524 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
1525 { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
1526 echo "$as_me: creating $CONFIG_STATUS" >&6;}
1527 cat >$CONFIG_STATUS <<_ACEOF
1529 # Generated by $as_me.
1530 # Run this file to recreate the current configuration.
1531 # Compiler output produced by configure, useful for debugging
1532 # configure, is in config.log if it exists.
1537 SHELL=\${CONFIG_SHELL-$SHELL}
1540 cat >>$CONFIG_STATUS <<\_ACEOF
1541 ## --------------------- ##
1542 ## M4sh Initialization. ##
1543 ## --------------------- ##
1545 # Be Bourne compatible
1546 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1549 # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1550 # is contrary to our usage. Disable this feature.
1551 alias -g '${1+"$@"}'='"$@"'
1552 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
1555 DUALCASE=1; export DUALCASE # for MKS sh
1557 # Support unset when possible.
1558 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1565 # Work around bugs in pre-3.0 UWIN ksh.
1566 $as_unset ENV MAIL MAILPATH
1573 LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
1574 LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
1575 LC_TELEPHONE LC_TIME
1577 if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
1578 eval $as_var=C; export $as_var
1584 # Required to use basename.
1585 if expr a : '\(a\)' >/dev/null 2>&1; then
1591 if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
1592 as_basename=basename
1598 # Name of the executable.
1599 as_me=`$as_basename "$0" ||
1600 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1601 X"$0" : 'X\(//\)$' \| \
1602 X"$0" : 'X\(/\)$' \| \
1603 . : '\(.\)' 2>/dev/null ||
1605 sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
1606 /^X\/\(\/\/\)$/{ s//\1/; q; }
1607 /^X\/\(\/\).*/{ s//\1/; q; }
1611 # PATH needs CR, and LINENO needs CR and PATH.
1612 # Avoid depending upon Character Ranges.
1613 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1614 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1615 as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1616 as_cr_digits='0123456789'
1617 as_cr_alnum=$as_cr_Letters$as_cr_digits
1619 # The user is always right.
1620 if test "${PATH_SEPARATOR+set}" != set; then
1621 echo "#! /bin/sh" >conf$$.sh
1622 echo "exit 0" >>conf$$.sh
1624 if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1635 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1636 test "x$as_lineno_1" != "x$as_lineno_2" &&
1637 test "x$as_lineno_3" = "x$as_lineno_2" || {
1638 # Find who we are. Look in the path if we contain no path at all
1641 *[\\/]* ) as_myself=$0 ;;
1642 *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1646 test -z "$as_dir" && as_dir=.
1647 test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1652 # We did not find ourselves, most probably we were run as `sh COMMAND'
1653 # in which case we are not to be found in the path.
1654 if test "x$as_myself" = x; then
1657 if test ! -f "$as_myself"; then
1658 { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
1659 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
1660 { (exit 1); exit 1; }; }
1662 case $CONFIG_SHELL in
1664 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1665 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
1668 test -z "$as_dir" && as_dir=.
1669 for as_base in sh bash ksh sh5; do
1672 if ("$as_dir/$as_base" -c '
1675 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1676 test "x$as_lineno_1" != "x$as_lineno_2" &&
1677 test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
1678 $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
1679 $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
1680 CONFIG_SHELL=$as_dir/$as_base
1682 exec "$CONFIG_SHELL" "$0" ${1+"$@"}
1690 # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1691 # uniformly replaced by the line number. The first 'sed' inserts a
1692 # line-number line before each line; the second 'sed' does the real
1693 # work. The second script uses 'N' to pair each line-number line
1694 # with the numbered line, and appends trailing '-' during
1695 # substitution so that $LINENO is not a special case at line end.
1696 # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1697 # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
1698 sed '=' <$as_myself |
1703 s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
1706 s,^['$as_cr_digits']*\n,,
1708 chmod +x $as_me.lineno ||
1709 { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
1710 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
1711 { (exit 1); exit 1; }; }
1713 # Don't try to exec as it changes $[0], causing all sort of problems
1714 # (the dirname of $[0] is not the place where we might find the
1715 # original and so on. Autoconf is especially sensible to this).
1717 # Exit status is that of the last command.
1722 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
1723 *c*,-n*) ECHO_N= ECHO_C='
1725 *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
1726 *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
1729 if expr a : '\(a\)' >/dev/null 2>&1; then
1735 rm -f conf$$ conf$$.exe conf$$.file
1737 if ln -s conf$$.file conf$$ 2>/dev/null; then
1738 # We could just check for DJGPP; but this test a) works b) is more generic
1739 # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
1740 if test -f conf$$.exe; then
1741 # Don't use ln at all; we don't have any links
1746 elif ln conf$$.file conf$$ 2>/dev/null; then
1751 rm -f conf$$ conf$$.exe conf$$.file
1753 if mkdir -p . 2>/dev/null; then
1756 test -d ./-p && rmdir ./-p
1760 as_executable_p="test -f"
1762 # Sed expression to map a string onto a valid CPP name.
1763 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1765 # Sed expression to map a string onto a valid variable name.
1766 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1770 # We need space, tab and new line, in precisely that order.
1780 # Open the log real soon, to keep \$[0] and so on meaningful, and to
1781 # report actual input values of CONFIG_FILES etc. instead of their
1782 # values after options handling. Logging --version etc. is OK.
1786 sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
1787 ## Running $as_me. ##
1792 This file was extended by chise-base $as_me 0.23, which was
1793 generated by GNU Autoconf 2.59. Invocation command line was
1795 CONFIG_FILES = $CONFIG_FILES
1796 CONFIG_HEADERS = $CONFIG_HEADERS
1797 CONFIG_LINKS = $CONFIG_LINKS
1798 CONFIG_COMMANDS = $CONFIG_COMMANDS
1802 echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
1806 # Files that config.status was made for.
1807 if test -n "$ac_config_files"; then
1808 echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
1811 if test -n "$ac_config_headers"; then
1812 echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
1815 if test -n "$ac_config_links"; then
1816 echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
1819 if test -n "$ac_config_commands"; then
1820 echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
1823 cat >>$CONFIG_STATUS <<\_ACEOF
1826 \`$as_me' instantiates files from templates according to the
1827 current configuration.
1829 Usage: $0 [OPTIONS] [FILE]...
1831 -h, --help print this help, then exit
1832 -V, --version print version number, then exit
1833 -q, --quiet do not print progress messages
1834 -d, --debug don't remove temporary files
1835 --recheck update $as_me by reconfiguring in the same conditions
1836 --file=FILE[:TEMPLATE]
1837 instantiate the configuration file FILE
1839 Configuration files:
1842 Report bugs to <bug-autoconf@gnu.org>."
1845 cat >>$CONFIG_STATUS <<_ACEOF
1847 chise-base config.status 0.23
1848 configured by $0, generated by GNU Autoconf 2.59,
1849 with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
1851 Copyright (C) 2003 Free Software Foundation, Inc.
1852 This config.status script is free software; the Free Software Foundation
1853 gives unlimited permission to copy, distribute and modify it."
1857 cat >>$CONFIG_STATUS <<\_ACEOF
1858 # If no file are specified by the user, then we need to provide default
1859 # value. By we need to know if files were specified by the user.
1865 ac_option=`expr "x$1" : 'x\([^=]*\)='`
1866 ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
1874 *) # This is not an option, so the user has probably given explicit
1877 ac_need_defaults=false;;
1881 # Handling of the options.
1883 cat >>$CONFIG_STATUS <<\_ACEOF
1884 -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
1886 --version | --vers* | -V )
1887 echo "$ac_cs_version"; exit 0 ;;
1889 # Conflict between --help and --header
1890 { { echo "$as_me:$LINENO: error: ambiguous option: $1
1891 Try \`$0 --help' for more information." >&5
1892 echo "$as_me: error: ambiguous option: $1
1893 Try \`$0 --help' for more information." >&2;}
1894 { (exit 1); exit 1; }; };;
1895 --help | --hel | -h )
1896 echo "$ac_cs_usage"; exit 0 ;;
1897 --debug | --d* | -d )
1899 --file | --fil | --fi | --f )
1901 CONFIG_FILES="$CONFIG_FILES $ac_optarg"
1902 ac_need_defaults=false;;
1903 --header | --heade | --head | --hea )
1905 CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
1906 ac_need_defaults=false;;
1907 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
1908 | -silent | --silent | --silen | --sile | --sil | --si | --s)
1912 -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
1913 Try \`$0 --help' for more information." >&5
1914 echo "$as_me: error: unrecognized option: $1
1915 Try \`$0 --help' for more information." >&2;}
1916 { (exit 1); exit 1; }; } ;;
1918 *) ac_config_targets="$ac_config_targets $1" ;;
1924 ac_configure_extra_args=
1926 if $ac_cs_silent; then
1928 ac_configure_extra_args="$ac_configure_extra_args --silent"
1932 cat >>$CONFIG_STATUS <<_ACEOF
1933 if \$ac_cs_recheck; then
1934 echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
1935 exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
1944 cat >>$CONFIG_STATUS <<\_ACEOF
1945 for ac_config_target in $ac_config_targets
1947 case "$ac_config_target" in
1948 # Handling of arguments.
1949 "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
1950 *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
1951 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
1952 { (exit 1); exit 1; }; };;
1956 # If the user did not use the arguments to specify the items to instantiate,
1957 # then the envvar interface is used. Set only those that are not.
1958 # We use the long form for the default assignment because of an extremely
1959 # bizarre bug on SunOS 4.1.3.
1960 if $ac_need_defaults; then
1961 test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
1964 # Have a temporary directory for convenience. Make it in the build tree
1965 # simply because there is no reason to put it here, and in addition,
1966 # creating and moving files from /tmp can sometimes cause problems.
1967 # Create a temporary directory, and hook for its removal unless debugging.
1970 trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
1971 trap '{ (exit 1); exit 1; }' 1 2 13 15
1974 # Create a (secure) tmp directory for tmp files.
1977 tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
1978 test -n "$tmp" && test -d "$tmp"
1981 tmp=./confstat$$-$RANDOM
1982 (umask 077 && mkdir $tmp)
1985 echo "$me: cannot create a temporary directory in ." >&2
1986 { (exit 1); exit 1; }
1991 cat >>$CONFIG_STATUS <<_ACEOF
1994 # CONFIG_FILES section.
1997 # No need to generate the scripts if there are no CONFIG_FILES.
1998 # This happens for instance when ./config.status config.h
1999 if test -n "\$CONFIG_FILES"; then
2000 # Protect against being on the right side of a sed subst in config.status.
2001 sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
2002 s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
2003 s,@SHELL@,$SHELL,;t t
2004 s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
2005 s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
2006 s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
2007 s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
2008 s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
2009 s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
2010 s,@exec_prefix@,$exec_prefix,;t t
2011 s,@prefix@,$prefix,;t t
2012 s,@program_transform_name@,$program_transform_name,;t t
2013 s,@bindir@,$bindir,;t t
2014 s,@sbindir@,$sbindir,;t t
2015 s,@libexecdir@,$libexecdir,;t t
2016 s,@datadir@,$datadir,;t t
2017 s,@sysconfdir@,$sysconfdir,;t t
2018 s,@sharedstatedir@,$sharedstatedir,;t t
2019 s,@localstatedir@,$localstatedir,;t t
2020 s,@libdir@,$libdir,;t t
2021 s,@includedir@,$includedir,;t t
2022 s,@oldincludedir@,$oldincludedir,;t t
2023 s,@infodir@,$infodir,;t t
2024 s,@mandir@,$mandir,;t t
2025 s,@build_alias@,$build_alias,;t t
2026 s,@host_alias@,$host_alias,;t t
2027 s,@target_alias@,$target_alias,;t t
2029 s,@ECHO_C@,$ECHO_C,;t t
2030 s,@ECHO_N@,$ECHO_N,;t t
2031 s,@ECHO_T@,$ECHO_T,;t t
2033 s,@build@,$build,;t t
2034 s,@build_cpu@,$build_cpu,;t t
2035 s,@build_vendor@,$build_vendor,;t t
2036 s,@build_os@,$build_os,;t t
2038 s,@host_cpu@,$host_cpu,;t t
2039 s,@host_vendor@,$host_vendor,;t t
2040 s,@host_os@,$host_os,;t t
2041 s,@target@,$target,;t t
2042 s,@target_cpu@,$target_cpu,;t t
2043 s,@target_vendor@,$target_vendor,;t t
2044 s,@target_os@,$target_os,;t t
2045 s,@ac_configure_args@,$ac_configure_args,;t t
2046 s,@xemacs_site_includes@,$xemacs_site_includes,;t t
2047 s,@xemacs_site_libraries@,$xemacs_site_libraries,;t t
2048 s,@xemacs_opts@,$xemacs_opts,;t t
2049 s,@cvs_root@,$cvs_root,;t t
2050 s,@LIBOBJS@,$LIBOBJS,;t t
2051 s,@LTLIBOBJS@,$LTLIBOBJS,;t t
2056 cat >>$CONFIG_STATUS <<\_ACEOF
2057 # Split the substitutions into bite-sized pieces for seds with
2058 # small command number limits, like on Digital OSF/1 and HP-UX.
2060 ac_sed_frag=1 # Number of current file.
2061 ac_beg=1 # First line for current file.
2062 ac_end=$ac_max_sed_lines # Line after last line for current file.
2065 while $ac_more_lines; do
2066 if test $ac_beg -gt 1; then
2067 sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
2069 sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
2071 if test ! -s $tmp/subs.frag; then
2074 # The purpose of the label and of the branching condition is to
2075 # speed up the sed processing (if there are no `@' at all, there
2076 # is no need to browse any of the substitutions).
2077 # These are the two extra sed commands mentioned above.
2079 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
2080 if test -z "$ac_sed_cmds"; then
2081 ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
2083 ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
2085 ac_sed_frag=`expr $ac_sed_frag + 1`
2087 ac_end=`expr $ac_end + $ac_max_sed_lines`
2090 if test -z "$ac_sed_cmds"; then
2093 fi # test -n "$CONFIG_FILES"
2096 cat >>$CONFIG_STATUS <<\_ACEOF
2097 for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
2098 # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
2100 - | *:- | *:-:* ) # input from stdin
2102 ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
2103 ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
2104 *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
2105 ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
2106 * ) ac_file_in=$ac_file.in ;;
2109 # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
2110 ac_dir=`(dirname "$ac_file") 2>/dev/null ||
2111 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
2112 X"$ac_file" : 'X\(//\)[^/]' \| \
2113 X"$ac_file" : 'X\(//\)$' \| \
2114 X"$ac_file" : 'X\(/\)' \| \
2115 . : '\(.\)' 2>/dev/null ||
2117 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
2118 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
2119 /^X\(\/\/\)$/{ s//\1/; q; }
2120 /^X\(\/\).*/{ s//\1/; q; }
2122 { if $as_mkdir_p; then
2127 while test ! -d "$as_dir"; do
2128 as_dirs="$as_dir $as_dirs"
2129 as_dir=`(dirname "$as_dir") 2>/dev/null ||
2130 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
2131 X"$as_dir" : 'X\(//\)[^/]' \| \
2132 X"$as_dir" : 'X\(//\)$' \| \
2133 X"$as_dir" : 'X\(/\)' \| \
2134 . : '\(.\)' 2>/dev/null ||
2136 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
2137 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
2138 /^X\(\/\/\)$/{ s//\1/; q; }
2139 /^X\(\/\).*/{ s//\1/; q; }
2142 test ! -n "$as_dirs" || mkdir $as_dirs
2143 fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
2144 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
2145 { (exit 1); exit 1; }; }; }
2149 if test "$ac_dir" != .; then
2150 ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
2151 # A "../" for each directory in $ac_dir_suffix.
2152 ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
2154 ac_dir_suffix= ac_top_builddir=
2158 .) # No --srcdir option. We are building in place.
2160 if test -z "$ac_top_builddir"; then
2163 ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
2165 [\\/]* | ?:[\\/]* ) # Absolute path.
2166 ac_srcdir=$srcdir$ac_dir_suffix;
2167 ac_top_srcdir=$srcdir ;;
2169 ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
2170 ac_top_srcdir=$ac_top_builddir$srcdir ;;
2173 # Do not use `cd foo && pwd` to compute absolute paths, because
2174 # the directories may not exist.
2176 .) ac_abs_builddir="$ac_dir";;
2179 .) ac_abs_builddir=`pwd`;;
2180 [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
2181 *) ac_abs_builddir=`pwd`/"$ac_dir";;
2184 case $ac_abs_builddir in
2185 .) ac_abs_top_builddir=${ac_top_builddir}.;;
2187 case ${ac_top_builddir}. in
2188 .) ac_abs_top_builddir=$ac_abs_builddir;;
2189 [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
2190 *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
2193 case $ac_abs_builddir in
2194 .) ac_abs_srcdir=$ac_srcdir;;
2197 .) ac_abs_srcdir=$ac_abs_builddir;;
2198 [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
2199 *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
2202 case $ac_abs_builddir in
2203 .) ac_abs_top_srcdir=$ac_top_srcdir;;
2205 case $ac_top_srcdir in
2206 .) ac_abs_top_srcdir=$ac_abs_builddir;;
2207 [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
2208 *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
2214 if test x"$ac_file" != x-; then
2215 { echo "$as_me:$LINENO: creating $ac_file" >&5
2216 echo "$as_me: creating $ac_file" >&6;}
2219 # Let's still pretend it is `configure' which instantiates (i.e., don't
2220 # use $as_me), people would be surprised to read:
2221 # /* config.h. Generated by config.status. */
2222 if test x"$ac_file" = x-; then
2225 configure_input="$ac_file. "
2227 configure_input=$configure_input"Generated from `echo $ac_file_in |
2228 sed 's,.*/,,'` by configure."
2230 # First look for the input files in the build tree, otherwise in the
2232 ac_file_inputs=`IFS=:
2233 for f in $ac_file_in; do
2235 -) echo $tmp/stdin ;;
2237 # Absolute (can't be DOS-style, as IFS=:)
2238 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
2239 echo "$as_me: error: cannot find input file: $f" >&2;}
2240 { (exit 1); exit 1; }; }
2243 if test -f "$f"; then
2246 elif test -f "$srcdir/$f"; then
2251 { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
2252 echo "$as_me: error: cannot find input file: $f" >&2;}
2253 { (exit 1); exit 1; }; }
2256 done` || { (exit 1); exit 1; }
2258 cat >>$CONFIG_STATUS <<_ACEOF
2262 cat >>$CONFIG_STATUS <<\_ACEOF
2264 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
2265 s,@configure_input@,$configure_input,;t t
2266 s,@srcdir@,$ac_srcdir,;t t
2267 s,@abs_srcdir@,$ac_abs_srcdir,;t t
2268 s,@top_srcdir@,$ac_top_srcdir,;t t
2269 s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
2270 s,@builddir@,$ac_builddir,;t t
2271 s,@abs_builddir@,$ac_abs_builddir,;t t
2272 s,@top_builddir@,$ac_top_builddir,;t t
2273 s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
2274 " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
2276 if test x"$ac_file" != x-; then
2277 mv $tmp/out $ac_file
2286 cat >>$CONFIG_STATUS <<\_ACEOF
2288 { (exit 0); exit 0; }
2290 chmod +x $CONFIG_STATUS
2291 ac_clean_files=$ac_clean_files_save
2294 # configure is writing to config.log, and then calls config.status.
2295 # config.status does its own redirection, appending to config.log.
2296 # Unfortunately, on DOS this fails, as config.log is still kept open
2297 # by configure, so config.status won't be able to write to it; its
2298 # output is simply discarded. So we exec the FD to /dev/null,
2299 # effectively closing config.log, so it can be properly (re)opened and
2300 # appended to by config.status. When coming back to configure, we
2301 # need to make the FD available again.
2302 if test "$no_create" != yes; then
2304 ac_config_status_args=
2305 test "$silent" = yes &&
2306 ac_config_status_args="$ac_config_status_args --quiet"
2308 $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
2310 # Use ||, not &&, to avoid exiting from the if with $? = 1, which
2311 # would make configure fail if this is the last instruction.
2312 $ac_cs_success || { (exit 1); exit 1; }